The ad7476 driver supports variants with different amount of supply
regulators. On some variants there is only VCC, which is used as a
reference voltage. Others have separate VREF regulator, and some rely on
internal VREF. Some have both internal VREF and option to connect
external one.
The ad7476 driver reads the regulator voltage only when the user asks to
get the scale. This means the driver needs to do some dancing while
picking the correct reference regulator (or internal reference), and
store it for the later use.
According to the discussion [1] variable voltage references are rare,
making it hard to justify the added complexity for supporting those.
Drop the support for the variable voltage references and simplify things
by using the managed regulator get and enable interfaces.
Link: https://lore.kernel.org/linux-iio/20250331122247.05c6b09d@jic23-huawei/#1
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: $URL #1
Link: https://patch.msgid.link/4a497cc5ac0f6506c1c94d10849e0ae1cacf1191.1754901948.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad7476 driver uses a table of structures for defining the IC variant
specific data. Table is indexed using enum values, which are picked by
SPI ID.
Having the table and an enum adds extra complexity and may encourage
adding IC specific quircks in the code, instead of centralizing the IC
differences in one place, the chip-info.
Simplify this by dropping the table and using individual structures for
the IC specific data, and storing the IC specific structure's address
directly in the SPI ID data. Finally, switch to the
spi_get_device_match_data() and add a check for the return value.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/9e179bb3ba52303448ae4a559c1f011acd3f2fa6.1754901948.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add Vishay VEML6046X00 high accuracy RGBIR color sensor.
This sensor provides three colour (red, green and blue) as well as one
infrared (IR) channel through I2C.
Support direct and buffered mode.
An optional interrupt for signaling green colour threshold underflow or
overflow is not supported so far.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Link: https://patch.msgid.link/20250728075447.338725-3-ak@it-klinger.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When `devm_add_action_or_reset()` fails, it is due to a failed memory
allocation and will thus return `-ENOMEM`. `dev_err_probe()` doesn't do
anything when error is `-ENOMEM`. Therefore, remove the useless call to
`dev_err_probe()` when `devm_add_action_or_reset()` fails, and just
return the value instead.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/pndectqm7te.a.out@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Describe the inactivity detection additionally using the free-fall
register. Due to the controversial discussions on the mailing list, this
section of the documentation will be committed separately to allow for a
more focused and detailed elaboration of the topic.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250727210014.27766-8-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Inactivity and free-fall events are essentially the same type of sensor
events. Therefore, inactivity detection (normally set for periods between 1
and 255 seconds) can be extended for shorter durations to support free-fall
detection.
For periods shorter than 1 second, the driver automatically configures the
threshold and duration using the free-fall register. For periods longer
than 1 second, it uses the inactivity threshold and duration using the
inactivity registers.
When using the free-fall register, the link bit is not set, which means
auto-sleep cannot be enabled if activity detection is also active.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250727210014.27766-6-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Enable AC/DC coupling configuration for activity and inactivity detection
by setting the AC/DC bit. Extend existing magnitude-based detection with
adaptive AC-coupled mode.
Use DC-coupled mode to compare acceleration samples directly against
configured thresholds. Use AC-coupled mode to compare samples against a
reference taken at the start of activity detection. Implement DC-coupled
events using MAG, and AC-coupled events using MAG_ADAPTIVE.
Expose configuration of thresholds and periods via separate sysfs handles.
Note that both coupling modes share the same sensor registers, so activity
or inactivity detection cannot be configured for both AC and DC
simultaneously. Apply the most recently configured mode.
Simplify event handling and support adaptive AC-coupling.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250727210014.27766-5-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for the sensor’s inactivity feature in the driver. When both
activity and inactivity detection are enabled, the sensor sets a link bit
that ties the two functions together. This also enables auto-sleep mode,
allowing the sensor to automatically enter sleep state upon detecting
inactivity.
Inactivity detection relies on a configurable threshold and a specified
time period. If sensor measurements remain below the threshold for the
defined duration, the sensor transitions to the inactivity state.
When an Output Data Rate (ODR) is set, the inactivity time period is
automatically adjusted to a sensible default. Higher ODRs result in shorter
inactivity timeouts, while lower ODRs allow longer durations-within
reasonable upper and lower bounds. This is important because features like
auto-sleep operate effectively only between 12.5 Hz and 400 Hz. These
defaults are applied when the sample rate is modified, but users can
override them by explicitly setting a custom inactivity timeout.
Similarly, configuring the g-range provides default threshold values for
both activity and inactivity detection. These are implicit defaults meant
to simplify configuration, but they can also be manually overridden as
needed.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250727210014.27766-4-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Enable the sensor to detect activity and trigger interrupts accordingly.
Activity events are determined based on a threshold, which is initialized
to a sensible default during probe. This default value is adopted from the
legacy ADXL345 input driver to maintain consistent behavior.
The combination of activity detection, ODR configuration, and range
settings lays the groundwork for the activity/inactivity hysteresis
mechanism, which will be implemented in a subsequent patch. As such,
portions of this patch prepare switch-case structures to support those
upcoming changes.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250727210014.27766-3-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Driver is getting clock and almost immediately enabling it, with the
devm_request_irq() as the only relevant code executed between, thus the
probe path and cleanups can be simplified with devm_clk_get_enabled().
Move devm_request_irq() earlier, so the interrupt handler will be
registered before clock is enabled. This might be important in case
regulator supplies are enabled by other device driver and this device
raises interrupt immediately after clock sarts ticking.
The change does not reverse cleanup paths - first regulator will be
disabled, then clock and finally interrupt handler freed.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250713-iio-clk-get-enabled-v1-1-70abc1f9ce6c@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The SARADC controller in most Rockchip SoCs are part of power domains
that are always powered on, i.e. PD_BUS or PD_PERI. These always powered
on power domains have typically not been described in the device tree.
Because these power domains have been left out of the device tree there
has not been any real need to properly describe the power domain of the
SARADC controller.
On RK3528 the SARADC controller is part of the PD_VPU power domain.
Add support to describe an optional power-domains for the SARADC
controller in Rockchip SoCs.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250723085654.2273324-4-jonas@kwiboo.se
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Pull turbostat updates from Len Brown:
"tools/power turbostat: version 2025.09.09
- Probe and display L3 Cache topology
- Add ability to average an added counter (useful for pre-integrated
"counters", such as Watts)
- Break the limit of 64 built-in counters
- Assorted bug fixes and minor feature tweaks"
* tag 'turbostat-2025.09.09' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2025.09.09
tools/power turbostat: Handle non-root legacy-uncore sysfs permissions
tools/power turbostat: standardize PER_THREAD_PARAMS
tools/power turbostat: Fix DMR support
tools/power turbostat: add format "average" for external attributes
tools/power turbostat: delete GET_PKG()
tools/power turbostat: probe and display L3 cache topology
tools/power turbostat: Support more than 64 built-in-counters
tools/power turbostat.8: Document Totl%C0, Any%C0, GFX%C0, CPUGFX% columns
tools/power turbostat: Fix bogus SysWatt for forked program
tools/power turbostat: Handle cap_get_proc() ENOSYS
tools/power turbostat: Fix build with musl
tools/power turbostat: verify arguments to params --show and --hide
tools/power turbostat: regression fix: --show C1E%
Pull smp fixes from Borislav Petkov:
- Remove an obsolete comment and fix spelling
* tag 'smp_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Remove obsolete comment from takedown_cpu()
smp: Fix spelling in on_each_cpu_cond_mask()'s doc-comment
Pull irq fixes from Borislav Petkov:
- Fix a wrong ioremap size in mvebu-gicp
- Remove yet another compile-test case for a driver which needs an
additional dependency
- Fix a lock inversion scenario in the IRQ unit test suite
- Remove an impossible flag situation in gic-v5
- Do not iounmap resources in gic-v5 which are managed by devm
- Make sure stale, left-over interrupts in mvebu-gicp are cleared on
driver init
- Fix a reference counting mishap in msi-lib
- Fix a dereference-before-null-ptr-check case in the riscv-imsic
irqchip driver
* tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mvebu-gicp: Use resource_size() for ioremap()
irqchip: Build IMX_MU_MSI only on ARM
genirq/test: Resolve irq lock inversion warnings
irqchip/gic-v5: Remove IRQD_RESEND_WHEN_IN_PROGRESS for ITS IRQs
irqchip/gic-v5: iwb: Fix iounmap probe failure path
irqchip/mvebu-gicp: Clear pending interrupts on init
irqchip/msi-lib: Fix fwnode refcount in msi_lib_irq_domain_select()
irqchip/riscv-imsic: Don't dereference before NULL pointer check
Pull x86 fixes from Borislav Petkov:
- Fix an interrupt vector setup race which leads to a non-functioning
device
- Add new Intel CPU models *and* a family: 0x12. Finally. Yippie! :-)
* tag 'x86_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Plug vector setup race
x86/cpu: Add new Intel CPU model numbers for Wildcatlake and Novalake
Pull locking fix from Borislav Petkov:
- Prevent a futex hash leak due to different mm lifetimes
* tag 'locking_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Move futex cleanup to __mmdrop()
Probe and display L3 Cache topology
Add ability to average an added counter
(useful for pre-integrated "counters", such as Watts)
Break the limit of 64 built-in counters.
Assorted bug fixes and minor feature tweaks
Signed-off-by: Len Brown <len.brown@intel.com>
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/
may be readable by all, but
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/current_freq_khz
may be readable only by root.
Non-root turbostat users see complaints in this scenario.
Fail probe of the interface if we can't read current_freq_khz.
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Original-patch-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Together with the RAPL MSRs, there are more MSRs gone on DMR, including
PLR (Perf Limit Reasons), and IRTL (Package cstate Interrupt Response
Time Limit) MSRs. The configurable TDP info should also be retrieved
from TPMI based Intel Speed Select Technology feature.
Remove the access of these MSRs for DMR. Improve the DMR platform
feature table to make it more readable at the same time.
Fixes: 83075bd59d ("tools/power turbostat: Add initial support for DMR")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
