Add hwmon support for fan1_input attribute, which will expose fan speed
in RPM. With this in place we can monitor fan speed using lm-sensors tool.
$ sensors
i915-pci-0300
Adapter: PCI adapter
in0: 653.00 mV
fan1: 3833 RPM
power1: N/A (max = 43.00 W)
energy1: 32.02 kJ
v2: Handle overflow, add mutex protection and ABI documentation
Aesthetic adjustments (Riana)
v3: Change rotations data type, ABI date and version
v4: Fix wakeref leak
Drop switch case and simplify hwm_fan_xx() (Andi)
v5: Rework time calculation, aesthetic adjustments (Andy)
v6: Drop redundant overflow logic (Andy)
Split fan_input_read() into dedicated helper (Badal)
v7: Fix undefined reference to __udivdi3 for i386 (Andy)
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823034548.2670032-1-raag.jadav@intel.com
The i915 driver generates sysfs entries for each engine of the
GPU in /sys/class/drm/cardX/engines/.
The process is straightforward: we loop over the UABI engines and
for each one, we:
- Create the object.
- Create basic files.
- If the engine supports timeslicing, create timeslice duration files.
- If the engine supports preemption, create preemption-related files.
- Create default value files.
Currently, if any of these steps fail, the process stops, and no
further sysfs files are created.
However, it's not necessary to stop the process on failure.
Instead, we can continue creating the remaining sysfs files for
the other engines. Even if some files fail to be created, the
list of engines can still be retrieved by querying i915.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240819113140.325235-1-andi.shyti@linux.intel.com
Kernel test robot reports i915 can hit a warn in kvmalloc_node which has
a purpose of dissalowing crazy size kernel allocations. This was added in
7661809d49 ("mm: don't allow oversized kvmalloc() calls"):
/* Don't even allow crazy sizes */
if (WARN_ON_ONCE(size > INT_MAX))
return NULL;
This would be kind of okay since i915 at one point dropped the need for
making a shadow copy of the relocation list, but then it got re-added in
fd1500fcd4 ("Revert "drm/i915/gem: Drop relocation slowpath".") a year
after Linus added the above warning.
It is plausible that the issue was not seen until now because to trigger
gem_exec_reloc test requires a combination of an relatively older
generation hardware but with at least 8GiB of RAM installed. Probably even
more depending on runtime checks.
Lets cap what we allow userspace to pass in using the matching limit.
There should be no issue for real userspace since we are talking about
"crazy" number of relocations which have no practical purpose.
*) Well IGT tests might get upset but they can be easily adjusted.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202405151008.6ddd1aaf-oliver.sang@intel.com
Cc: Kees Cook <keescook@chromium.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240521101201.18978-1-tursulin@igalia.com
In commit a78a8da51b ("drm/ttm: replace busy placement with flags v6"),
__i915_ttm_get_pages was updated to use flags instead of the separate
'busy' placement list. However, the behaviour was subtly changed.
Originally, the function would attempt to use the preferred placement
without eviction, and give an opportunity to restart the operation
before falling back to allowing eviction.
This was unintentionally changed, as the preferred placement was not
given the TTM_PL_FLAG_DESIRED flag, and so eviction could be triggered
in that first pass. This caused thrashing, and a significant performance
regression on DG2 systems with small BAR. For example, Minecraft and
Team Fortress 2 would drop to single-digit framerates.
Restore the original behaviour by marking the initial placement as
desired on that first attempt. Also, rework this to use a separate
struct ttm_palcement, as the individual placements are marked 'const',
so hot-patching the flags is even more dodgy than before.
Thanks to Justin Brewer for bisecting this.
Fixes: a78a8da51b ("drm/ttm: replace busy placement with flags v6")
Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11255
Signed-off-by: David Gow <david@davidgow.net>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240804091851.122186-3-david@davidgow.net
In commit a78a8da51b ("drm/ttm: replace busy placement with flags v6"),
the old system of having a separate placement list (for placements
which should be used without eviction) and a 'busy' placement list (for
placements which should be attempted if eviction is required) was
replaced with a new one where placements could be marked 'FALLBACK' (to
be attempted if eviction is required) or 'DESIRED' (to be attempted
first, but not if eviction is required).
i915 had always included the requested placement in the list of
'busy' placements: i.e., the placement could be used either if eviction
is required or not. But when the new system was put in place, the
requested (first) placement was marked 'DESIRED', so would never be used
if eviction became necessary. While a bug in the original commit
prevented this flag from working, when this was fixed in
4a0e7b3c ("drm/i915: fix applying placement flag"), it caused long hangs
on DG2 systems with small BAR.
Don't mark the requested placement DESIRED (or FALLBACK), allowing it to
be used in both situations. This matches the old behaviour, and resolves
the hangs.
Thanks to Justin Brewer for bisecting the issue.
Fixes: a78a8da51b ("drm/ttm: replace busy placement with flags v6")
Fixes: 4a0e7b3c37 ("drm/i915: fix applying placement flag")
Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11255
Signed-off-by: David Gow <david@davidgow.net>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240804091851.122186-2-david@davidgow.net
Commit 05da7d9f71 ("drm/i915/gem: Downgrade stolen lmem setup
warning") adds a debug message where the "lmem_size" and
"dsm_base" variables are printed using the %lli identifier.
However, these variables are defined as resource_size_t, which
are unsigned long for 32-bit machines and unsigned long long for
64-bit machines.
The documentation (core-api/printk-formats.rst) recommends using
the %pa specifier for printing addresses and sizes of resources.
Replace %lli with %pa.
This patch also mutes the following sparse warning when compiling
with:
make W=1 ARCH=i386 drivers/gpu/drm/i915
>> drivers/gpu/drm/i915/gem/i915_gem_stolen.c:941:5: error: format '%lli'
expects argument of type 'long long int', but argument 5 has type
'resource_size_t' {aka 'unsigned int'} [-Werror=format=]
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240617184243.330231-3-andi.shyti@linux.intel.com
CI has been sporadically reporting the following issue triggered by
igt@i915_selftest@live@hangcheck on ADL-P and similar machines:
<6> [414.049203] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_fence
...
<6> [414.068804] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled
<6> [414.068812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled
<3> [414.070354] Unable to pin Y-tiled fence; err:-4
<3> [414.071282] i915_vma_revoke_fence:301 GEM_BUG_ON(!i915_active_is_idle(&fence->active))
...
<4>[ 609.603992] ------------[ cut here ]------------
<2>[ 609.603995] kernel BUG at drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c:301!
<4>[ 609.604003] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<4>[ 609.604006] CPU: 0 PID: 268 Comm: kworker/u64:3 Tainted: G U W 6.9.0-CI_DRM_14785-g1ba62f8cea9c+ #1
<4>[ 609.604008] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023
<4>[ 609.604010] Workqueue: i915 __i915_gem_free_work [i915]
<4>[ 609.604149] RIP: 0010:i915_vma_revoke_fence+0x187/0x1f0 [i915]
...
<4>[ 609.604271] Call Trace:
<4>[ 609.604273] <TASK>
...
<4>[ 609.604716] __i915_vma_evict+0x2e9/0x550 [i915]
<4>[ 609.604852] __i915_vma_unbind+0x7c/0x160 [i915]
<4>[ 609.604977] force_unbind+0x24/0xa0 [i915]
<4>[ 609.605098] i915_vma_destroy+0x2f/0xa0 [i915]
<4>[ 609.605210] __i915_gem_object_pages_fini+0x51/0x2f0 [i915]
<4>[ 609.605330] __i915_gem_free_objects.isra.0+0x6a/0xc0 [i915]
<4>[ 609.605440] process_scheduled_works+0x351/0x690
...
In the past, there were similar failures reported by CI from other IGT
tests, observed on other platforms.
Before commit 63baf4f3d5 ("drm/i915/gt: Only wait for GPU activity
before unbinding a GGTT fence"), i915_vma_revoke_fence() was waiting for
idleness of vma->active via fence_update(). That commit introduced
vma->fence->active in order for the fence_update() to be able to wait
selectively on that one instead of vma->active since only idleness of
fence registers was needed. But then, another commit 0d86ee3509
("drm/i915/gt: Make fence revocation unequivocal") replaced the call to
fence_update() in i915_vma_revoke_fence() with only fence_write(), and
also added that GEM_BUG_ON(!i915_active_is_idle(&fence->active)) in front.
No justification was provided on why we might then expect idleness of
vma->fence->active without first waiting on it.
The issue can be potentially caused by a race among revocation of fence
registers on one side and sequential execution of signal callbacks invoked
on completion of a request that was using them on the other, still
processed in parallel to revocation of those fence registers. Fix it by
waiting for idleness of vma->fence->active in i915_vma_revoke_fence().
Fixes: 0d86ee3509 ("drm/i915/gt: Make fence revocation unequivocal")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/10021
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: stable@vger.kernel.org # v5.8+
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240603195446.297690-2-janusz.krzysztofik@linux.intel.com
The whole point of the previous fixes has been to change the CCS
hardware configuration to generate only one stream available to
the compute users. We did this by changing the info.engine_mask
that is set during device probe, reset during the detection of
the fused engines, and finally reset again when choosing the CCS
mode.
We can't use the engine_mask variable anymore, as with the
current configuration, it imposes only one CCS no matter what the
hardware configuration is.
Before changing the engine_mask for the third time, save it and
use it for calculating the CCS mode.
After the previous changes, the user reported a performance drop
to around 1/4. We have tested that the compute operations, with
the current patch, have improved by the same factor.
Fixes: 6db31251bb ("drm/i915/gt: Enable only one CCS for compute workload")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Gnattu OC <gnattuoc@me.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Tested-by: Jian Ye <jian.ye@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Tested-by: Gnattu OC <gnattuoc@me.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517090616.242529-1-andi.shyti@linux.intel.com
With gcc-7 and earlier, there are lots of warnings like
In file included from <command-line>:0:0:
In function '__guc_context_policy_add_priority.isra.66',
inlined from '__guc_context_set_prio.isra.67' at drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:3292:3,
inlined from 'guc_context_set_prio' at drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:3320:2:
include/linux/compiler_types.h:399:38: error: call to '__compiletime_assert_631' declared with attribute error: FIELD_PREP: mask is not constant
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^
...
drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:2422:3: note: in expansion of macro 'FIELD_PREP'
FIELD_PREP(GUC_KLV_0_KEY, GUC_CONTEXT_POLICIES_KLV_ID_##id) | \
^~~~~~~~~~
Make sure that GUC_KLV_0_KEY is an unsigned value to avoid the warning.
Fixes: 77b6f79df6 ("drm/i915/guc: Update to GuC version 69.0.3")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430164809.482131-1-julia.filipchuk@intel.com
When debugging GPU hangs Mesa developers are finding it useful to replay
the captured error state against the simulator. But due various simulator
limitations which prevent replicating all hangs, one step further is being
able to replay against a real GPU.
This is almost doable today with the missing part being able to upload the
captured context image into the driver state prior to executing the
uploaded hanging batch and all the buffers.
To enable this last part we add a new context parameter called
I915_CONTEXT_PARAM_CONTEXT_IMAGE. It follows the existing SSEU
configuration pattern of being able to select which context to apply
against, paired with the actual image and its size.
Since this is adding a new concept of debug only uapi, we hide it behind
a new kconfig option and also require activation with a module parameter.
Together with a warning banner printed at driver load, all those combined
should be sufficient to guard against inadvertently enabling the feature.
In terms of implementation we allow the legacy context set param to be
used since that removes the need to record the per context data in the
proto context, while still allowing flexibility of specifying context
images for any context.
Mesa MR using the uapi can be seen at:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27594
v2:
* Fix whitespace alignment as per checkpatch.
* Added warning on userspace misuse.
* Rebase for extracting ce->default_state shadowing.
v3:
* Rebase for I915_CONTEXT_PARAM_LOW_LATENCY.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Carlos Santa <carlos.santa@intel.com>
Signed-off-by: Tvrtko Ursulin <tursulin@igalia.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514145939.87427-2-tursulin@igalia.com
Problem statement: During the system boot time, an application request
for the bulk volume of cleared range bias memory when the clear_avail
is zero, we dont fallback into normal allocation method as we had an
unnecessary clear_avail check which prevents the fallback method leads
to fb allocation failure following system goes into unresponsive state.
Solution: Remove the unnecessary clear_avail check in the range bias
allocation function.
v2: add a kunit for this corner case (Daniel Vetter)
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Fixes: 96950929eb ("drm/buddy: Implement tracking clear page feature")
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514145636.16253-1-Arunpravin.PaneerSelvam@amd.com
The breadcrumbs use a GT wakeref for guarding the interrupt, but are
disarmed during release of the engine wakeref. This leaves a hole where
we may attach a breadcrumb just as the engine is parking (after it has
parked its breadcrumbs), execute the irq worker with some signalers still
attached, but never be woken again.
That issue manifests itself in CI with IGT runner timeouts while tests
are waiting indefinitely for release of all GT wakerefs.
<6> [209.151778] i915: Running live_engine_pm_selftests/live_engine_busy_stats
<7> [209.231628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_5
<7> [209.231816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4
<7> [209.231944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3
<7> [209.232056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [209.232166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [209.232270] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [209.232368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<4> [299.356116] [IGT] Inactivity timeout exceeded. Killing the current test with SIGQUIT.
...
<6> [299.356526] sysrq: Show State
...
<6> [299.373964] task:i915_selftest state:D stack:11784 pid:5578 tgid:5578 ppid:873 flags:0x00004002
<6> [299.373967] Call Trace:
<6> [299.373968] <TASK>
<6> [299.373970] __schedule+0x3bb/0xda0
<6> [299.373974] schedule+0x41/0x110
<6> [299.373976] intel_wakeref_wait_for_idle+0x82/0x100 [i915]
<6> [299.374083] ? __pfx_var_wake_function+0x10/0x10
<6> [299.374087] live_engine_busy_stats+0x9b/0x500 [i915]
<6> [299.374173] __i915_subtests+0xbe/0x240 [i915]
<6> [299.374277] ? __pfx___intel_gt_live_setup+0x10/0x10 [i915]
<6> [299.374369] ? __pfx___intel_gt_live_teardown+0x10/0x10 [i915]
<6> [299.374456] intel_engine_live_selftests+0x1c/0x30 [i915]
<6> [299.374547] __run_selftests+0xbb/0x190 [i915]
<6> [299.374635] i915_live_selftests+0x4b/0x90 [i915]
<6> [299.374717] i915_pci_probe+0x10d/0x210 [i915]
At the end of the interrupt worker, if there are no more engines awake,
disarm the breadcrumb and go to sleep.
Fixes: 9d5612ca16 ("drm/i915/gt: Defer enabling the breadcrumb interrupt to after submission")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/10026
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240423165505.465734-2-janusz.krzysztofik@linux.intel.com
Updates for v6.10
Core:
- Switched to generating register header files during build process
instead of shipping pre-generated headers
- Merged DPU and MDP4 format databases.
DP:
- Stop using compat string to distinguish DP and eDP cases
- Added support for X Elite platform (X1E80100)
- Reworked DP aux/audio support
- Added SM6350 DP to the bindings (no driver changes, using SM8350
as a fallback compat)
GPU:
- a7xx perfcntr reg fixes
- MAINTAINERS updates
- a750 devcoredump support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtpw6dNR9JBikFTQ=TCpt-9FeFW+SGjXWv+Jv3emm0Pbg@mail.gmail.com
