[Description]
- When we're in a no plane config, DCN is always asserting
P-State allow
- This creates a scenario where the P-State blackout can start
just as VUPDATE takes place and transitions the DCN config to
a one where one or more HUBP's are active which can result in
underflow
- To fix this issue, force p-state disallow and unforce after
the transition from no planes case -> one or more planes active
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
For mode programming we want to extend the prefetch as much as possible
(up to oto, or as long as we can for equ) if we're not already applying
the 60us prefetch requirement. This is to avoid intermittent underflow
issues during prefetch.
The prefetch extension is applied under the following scenarios:
1. We're in prefetch mode 1 (i.e. we don't support MCLK switch in blank)
2. We're using subvp or drr methods of p-state switch, in which case we
we don't care if prefetch takes up more of the blanking time
Mode programming typically chooses the smallest prefetch time possible
(i.e. highest bandwidth during prefetch) presumably to create margin between
p-states / c-states that happen in vblank and prefetch. Therefore we only
apply this prefetch extension when p-state in vblank is not required (UCLK
p-states take up the most vblank time).
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why:
With DP2.1a expansion we are allowing DP40 cables to do UHBR13.5
how:
Assume UHBR10 means UHBR13.5 also for unknown cable type and
passive cable type.
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ran Shi <ran.shi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove redundant functions members of pptable_funcs and change
the function type as static because they are not called by other
files.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hook up driver-specific atomic operations for managing AMD color
properties. Create AMD driver-specific color management properties
and attach them according to HW capabilities defined by `struct
dc_color_caps`.
First add plane degamma LUT properties that means user-blob and its
size. We will add more plane color properties in the next patches. In
addition, we define AMD_PRIVATE_COLOR to guard these driver-specific
plane properties.
Plane degamma can be used to linearize input space for arithmetical
operations that are more accurate when applied in linear color.
v2:
- update degamma LUT prop description
- move private color operations from amdgpu_display to amdgpu_dm_color
v5:
- get degamma blob correctly (Joshua)
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Co-developed-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We will add color mgmt properties to DRM planes in the next patches and
we want to track when one of this properties change to define atomic
commit behaviors. Using a similar approach from CRTC color props, we set
a color_mgmt_changed boolean whenever a plane color prop changes.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Place it in drm_property where drm_property_replace_blob and
drm_property_lookup_blob live. Then we can use the DRM helper for
driver-specific KMS properties too.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DRM_OBJECT_MAX_PROPERTY limits the number of properties to be attached
and we are increasing that value all time we add a new property (generic
or driver-specific).
In this series, we are adding 13 new KMS driver-specific properties for
AMD color manage:
- CRTC Gamma enumerated Transfer Function
- Plane: Degamma LUT+size+TF, HDR multiplier, shaper LUT+size+TF, 3D
LUT+size, blend LUT+size+TF (12)
Therefore, just increase DRM_OBJECT_MAX_PROPERTY to a number (64) that
accomodates these new properties and gives some room for others,
avoiding change this number everytime we add a new KMS property.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Part of commit c035819862 ("drm/amdgpu: fix buffer funcs setting order on suspend")
got dropped accidently. Add it back.
Fixes: c035819862 ("drm/amdgpu: fix buffer funcs setting order on suspend")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
One bug fix
- Add a missing call to drm_atomic_helper_shutdown() in Exynos DRM
driver.
This function is necessary during system shutdown and when the driver
is unbound. Without this function, components like panels may not shut
down properly, potentially leading to power issue as mentioned in the
kernel documentation, specially in the "driver instance overview"
secstion of 'drm_drv.c'.
Two cleanups
- Convert '.remove()' callback function in the Exynos DRM platform
driver to a version that returns void instead of an integer.
- Change connector type of exynos_drm_dpi.c module to DPI.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231212051134.48524-1-inki.dae@samsung.com
When exynos_drm_dpi.c was written, DRM_MODE_CONNECTOR_DPI did not exist
yet and I guess that's the reason why DRM_MODE_CONNECTOR_VGA was used as
the connector type.
However, now it makes more sense to use DRM_MODE_CONNECTOR_DPI as the
connector type.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
fix merge conflict and drop duplicated patch description.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown time
and at driver unbind time. Among other things, this means that if a
panel is in use that it won't be cleanly powered off at system
shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart and at driver remove (or unbind) time comes
straight out of the kernel doc "driver instance overview" in
drm_drv.c.
A few notes about this fix:
- When adding drm_atomic_helper_shutdown() to the unbind path, I added
it after drm_kms_helper_poll_fini() since that's when other drivers
seemed to have it.
- Technically with a previous patch, ("drm/atomic-helper:
drm_atomic_helper_shutdown(NULL) should be a noop"), we don't
actually need to check to see if our "drm" pointer is NULL before
calling drm_atomic_helper_shutdown(). We'll leave the "if" test in,
though, so that this patch can land without any dependencies. It
could potentially be removed later.
- This patch also makes sure to set the drvdata to NULL in the case of
bind errors to make sure that shutdown can't access freed data.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Two fixups
- Fix a potential error pointer dereference by checking the return value
of exynos_drm_crtc_get_by_type() function before accessing to crtc
object.
- Fix a wrong error checking in exynos_drm_dma.c modules, which was reported
by Dan[1]
[1] https://lore.kernel.org/all/33e52277-1349-472b-a55b-ab5c3462bfcf@moroto.mountain/
Pull scheduler fix from Borislav Petkov:
- Make sure tasks are thawed exactly and only once to avoid their state
getting corrupted
* tag 'sched_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
freezer,sched: Do not restore saved_state of a thawed task
Pull perf event fix from Borislav Petkov:
- Make sure perf event size validation is done on every event in the
group
* tag 'perf_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix perf_event_validate_size()
Pull x86 fixes from Borislav Petkov:
- Add a forgotten CPU vendor check in the AMD microcode post-loading
callback so that the callback runs only on AMD
- Make sure SEV-ES protocol negotiation happens only once and on the
BSP
* tag 'x86_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Check vendor in the AMD microcode callback
x86/sev: Fix kernel crash due to late update to read-only ghcb_version
Pull kvm fixes from Paolo Bonzini:
"Generic:
- Set .owner for various KVM file_operations so that files refcount
the KVM module until KVM is done executing _all_ code, including
the last few instructions of kvm_put_kvm(). And then revert the
misguided attempt to rely on "struct kvm" refcounts to pin
KVM-the-module.
ARM:
- Do not redo the mapping of vLPIs, if they have already been mapped
s390:
- Do not leave bits behind in PTEs
- Properly catch page invalidations that affect the prefix of a
nested guest
x86:
- When checking if a _running_ vCPU is "in-kernel", i.e. running at
CPL0, get the CPL directly instead of relying on
preempted_in_kernel (which is valid if and only if the vCPU was
preempted, i.e. NOT running).
- Fix a benign "return void" that was recently introduced.
Selftests:
- Makefile tweak for dependency generation
- '-Wformat' fix"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Update EFER software model on CR0 trap for SEV-ES
KVM: selftests: add -MP to CFLAGS
KVM: selftests: Actually print out magic token in NX hugepages skip message
KVM: x86: Remove 'return void' expression for 'void function'
Revert "KVM: Prevent module exit until all VMs are freed"
KVM: Set file_operations.owner appropriately for all such structures
KVM: x86: Get CPL directly when checking if loaded vCPU is in kernel mode
KVM: arm64: GICv4: Do not perform a map to a mapped vLPI
KVM: s390/mm: Properly reset no-dat
KVM: s390: vsie: fix wrong VIR 37 when MSO is used
Pull powerpc fix from Michael Ellerman:
- Fix stack teardown in ftrace_no_trace, seen as crashes doing CPU
hotplug while ftrace is active.
Thanks to Naveen N Rao.
* tag 'powerpc-6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/ftrace: Fix stack teardown in ftrace_no_trace
Pull gpio fix from Bartosz Golaszewski:
- fix an error path after a failed export in sysfs code
* tag 'gpio-fixes-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: sysfs: Fix error handling on failed export
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 6.7-rc5 to resolve some reported
issues. Included in here are:
- usb gadget f_hid, and uevent fix
- xhci driver revert to resolve a much-reported issue
- typec driver fix
All of these have been in linux-next with no reported issues"
* tag 'usb-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: gadget: f_hid: fix report descriptor allocation
Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1"
usb: typec: class: fix typec_altmode_put_partner to put plugs
USB: gadget: core: adjust uevent timing on gadget unbind
Pull serial driver fixes from Greg KH:
"Here are some small serial driver fixes for 6.7-rc4 to resolve some
reported issues. Included in here are:
- pl011 dma support fix
- sc16is7xx driver fix
- ma35d1 console index fix
- 8250 driver fixes for small issues
All of these have been in linux-next with no reported issues"
* tag 'tty-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_dw: Add ACPI ID for Granite Rapids-D UART
serial: ma35d1: Validate console index before assignment
ARM: PL011: Fix DMA support
serial: sc16is7xx: address RX timeout interrupt errata
serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bit
serial: 8250_omap: Add earlycon support for the AM654 UART controller
serial: 8250: 8250_omap: Do not start RX DMA on THRI interrupt
Pull char / misc driver fixes from Greg KH:
"Here are some small fixes for 6.7-rc5 for a variety of small driver
subsystems. Included in here are:
- debugfs revert for reported issue
- greybus revert for reported issue
- greybus fixup for endian build warning
- coresight driver fixes
- nvmem driver fixes
- devcoredump fix
- parport new device id
- ndtest build fix
All of these have ben in linux-next with no reported issues"
* tag 'char-misc-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
nvmem: Do not expect fixed layouts to grab a layout driver
parport: Add support for Brainboxes IX/UC/PX parallel cards
Revert "greybus: gb-beagleplay: Ensure le for values in transport"
greybus: gb-beagleplay: Ensure le for values in transport
greybus: BeaglePlay driver needs CRC_CCITT
Revert "debugfs: annotate debugfs handlers vs. removal with lockdep"
devcoredump: Send uevent once devcd is ready
ndtest: fix typo class_regster -> class_register
misc: mei: client.c: fix problem of return '-EOVERFLOW' in mei_cl_write
misc: mei: client.c: return negative error code in mei_cl_write
mei: pxp: fix mei_pxp_send_message return value
coresight: ultrasoc-smb: Fix uninitialized before use buf_hw_base
coresight: ultrasoc-smb: Config SMB buffer before register sink
coresight: ultrasoc-smb: Fix sleep while close preempt in enable_smb
Documentation: coresight: fix `make refcheckdocs` warning
hwtracing: hisi_ptt: Don't try to attach a task
hwtracing: hisi_ptt: Handle the interrupt in hardirq context
hwtracing: hisi_ptt: Add dummy callback pmu::read()
coresight: Fix crash when Perf and sysfs modes are used concurrently
coresight: etm4x: Remove bogous __exit annotation for some functions
Pull LoongArch fixes from Huacai Chen:
"Preserve syscall nr across execve(), slightly clean up drdtime(), fix
the Clang built zboot kernel, fix a stack unwinder bug and several bpf
jit bugs"
* tag 'loongarch-fixes-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: BPF: Fix unconditional bswap instructions
LoongArch: BPF: Fix sign-extension mov instructions
LoongArch: BPF: Don't sign extend function return value
LoongArch: BPF: Don't sign extend memory load operand
LoongArch: Preserve syscall nr across execve()
LoongArch: Set unwind stack type to unknown rather than set error flag
LoongArch: Slightly clean up drdtime()
LoongArch: Apply dynamic relocations for LLD
Pull MIPS fixes from Thomas Bogendoerfer:
- Fixes for broken Loongson firmware
- Fix lockdep splat
- Fix FPU states when creating kernel threads
* tag 'mips-fixes_6.7_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: kernel: Clear FPU states when setting up kernel threads
MIPS: Loongson64: Handle more memory types passed from firmware
MIPS: Loongson64: Enable DMA noncoherent support
MIPS: Loongson64: Reserve vgabios memory on boot
mips/smp: Call rcutree_report_cpu_starting() earlier
Pull perf tools fixes from Namhyung Kim:
"A random set of small bug fixes including:
- Fix segfault on AmpereOne due to missing default metricgroup name
- Fix segfault on `perf list --json` due to NULL pointer"
* tag 'perf-tools-fixes-for-v6.7-2-2023-12-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf list: Fix JSON segfault by setting the used skip_duplicate_pmus callback
perf vendor events arm64: AmpereOne: Add missing DefaultMetricgroupName fields
perf metrics: Avoid segv if default metricgroup isn't set
Pull smb client fixes from Steve French:
"Six smb3 client fixes:
- Fixes for copy_file_range and clone (cache invalidation and file
size), also addresses an xfstest failure
- Fix to return proper error if REMAP_FILE_DEDUP set (also fixes
xfstest generic/304)
- Fix potential null pointer reference with DFS
- Multichannel fix addressing (reverting an earlier patch) some of
the problems with enabling/disabling channels dynamically
Still working on a followon multichannel fix to address another issue
found in reconnect testing that will send next week"
* tag '6.7-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: reconnect worker should take reference on server struct unconditionally
Revert "cifs: reconnect work should have reference on server struct"
cifs: Fix non-availability of dedup breaking generic/304
smb: client: fix potential NULL deref in parse_dfs_referrals()
cifs: Fix flushing, invalidation and file size with FICLONE
cifs: Fix flushing, invalidation and file size with copy_file_range()
We can see that "bswap32: Takes an unsigned 32-bit number in either big-
or little-endian format and returns the equivalent number with the same
bit width but opposite endianness" in BPF Instruction Set Specification,
so it should clear the upper 32 bits in "case 32:" for both BPF_ALU and
BPF_ALU64.
[root@linux fedora]# echo 1 > /proc/sys/net/core/bpf_jit_enable
[root@linux fedora]# modprobe test_bpf
Before:
test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times)
test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times)
After:
test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 4 PASS
test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 4 PASS
Fixes: 4ebf9216e7 ("LoongArch: BPF: Support unconditional bswap instructions")
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
We can see that "Short form of movsx, dst_reg = (s8,s16,s32)src_reg" in
include/linux/filter.h, additionally, for BPF_ALU64 the value of the
destination register is unchanged whereas for BPF_ALU the upper 32 bits
of the destination register are zeroed, so it should clear the upper 32
bits for BPF_ALU.
[root@linux fedora]# echo 1 > /proc/sys/net/core/bpf_jit_enable
[root@linux fedora]# modprobe test_bpf
Before:
test_bpf: #81 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times)
test_bpf: #82 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times)
After:
test_bpf: #81 ALU_MOVSX | BPF_B jited:1 6 PASS
test_bpf: #82 ALU_MOVSX | BPF_H jited:1 6 PASS
By the way, the bpf selftest case "./test_progs -t verifier_movsx" can
also be fixed with this patch.
Fixes: f48012f161 ("LoongArch: BPF: Support sign-extension mov instructions")
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Currently, we store syscall nr in pt_regs::regs[11] and syscall execve()
accidentally overrides it during its execution:
sys_execve()
-> do_execve()
-> do_execveat_common()
-> bprm_execve()
-> exec_binprm()
-> search_binary_handler()
-> load_elf_binary()
-> ELF_PLAT_INIT()
ELF_PLAT_INIT() reset regs[11] to 0, so in syscall_exit_to_user_mode()
we later get a wrong syscall nr. This breaks tools like execsnoop since
it relies on execve() tracepoints.
Skip pt_regs::regs[11] reset in ELF_PLAT_INIT() to fix the issue.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
During unwinding, unwind_done() is used as an end condition. Normally it
unwind to the user stack and then set the stack type to unknown, which
is a normal exit. When something unexpected happens in unwind process
and we cannot unwind anymore, we should set the error flag, and also set
the stack type to unknown to indicate that the unwind process can not
continue. The error flag emphasizes that the unwind process produce an
unexpected error. There is no unexpected things when we unwind the PT_REGS
in the top of IRQ stack and find out that is an user mode PT_REGS. Thus,
we should not set error flag and just set stack type to unknown.
Reported-by: Hengqi Chen <hengqi.chen@gmail.com>
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
As we are just discarding the stable clock ID, simply write it into
$zero instead of allocating a temporary register.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
