Since remove_and_add_spares() was added to hot_remove_disk() it has
been possible for an rdev to be hot-removed while fix_read_error()
was running, so we need to be more careful, and take a reference to
the rdev while performing IO.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
'mirror' is only used to find 'rdev', several times.
So just find 'rdev' once, and use it instead.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Both functions use conf->mirrors[mirror].rdev several times, so
improve readability by storing this in a local variable.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
'tmp' is only ever used to extract 'tmp->rdev', so just use 'rdev' directly.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
rdev already holds conf->mirrors[d].rdev, so no need to load it again.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
mirrors[].rdev can become NULL at any point unless:
- a counted reference is held
- ->reconfig_mutex is held, or
- rcu_read_lock() is held
Reshape isn't always suitably careful as in the past rdev couldn't be
removed during reshape. It can now, so add protection.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
mirrors[].rdev can become NULL at any point unless:
- a counted reference is held
- ->reconfig_mutex is held, or
- rcu_read_lock() is held
Previously they could not become NULL during a resync/recovery/reshape either.
However when remove_and_add_spares() was added to hot_remove_disk(), that
changed.
So raid10_sync_request didn't previously need to protect rdev access,
but now it does.
Fix missed check(Shaohua)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
mirrors[].rdev can become NULL at any point unless:
- a counted reference is held
- ->reconfig_mutex is held, or
- rcu_read_lock() is held
raid10_status holds none of these. So add rcu_read_lock()
protection.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
If you have a raid10 with a replacement device that is resyncing -
e.g. after a crash before the replacement was complete - the write to
the replacement will increment nr_pending on the wrong device, which
will lead to strangeness.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Re-checking the faulty flag here brings no value.
The comment about "risk" refers to the risk that the device could
be in the process of being removed by ->hot_remove_disk().
However providing that the ->nr_pending count is incremented inside
an rcu_read_locked() region, there is no risk of that happening.
This is because the rdev pointer (in the personalities array) is set
to NULL before synchronize_rcu(), and ->nr_pending is tested
afterwards. If the rcu_read_locked region happens before the
synchronize_rcu(), the test will see that nr_pending has been incremented.
If it happens afterwards, the rdev pointer will be NULL so there is nothing
to increment.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
When the HOT_REMOVE_DISK ioctl is used to remove a device, we
call remove_and_add_spares() which will remove it from the personality
if possible. This improves the chances that the removal will succeed.
When writing "remove" to dev-XX/state, we don't. So that can fail more easily.
So add the remove_and_add_spares() into "remove" handling.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
A performance drop of mkfs has been observed on RAID10 during resync
since commit 09314799e4 ("md: remove 'go_faster' option from
->sync_request()"). Resync sends so many IOs it slows down non-resync
IOs significantly (few times). Add a short delay to a resync. The
previous long sleep (1s) has proven unnecessary, even very short delay
brings performance right.
The change also applied to raid1. The problem has not been observed on
raid1, however it shares barriers code with raid10 so it might be an
issue for some setup too.
Suggested-by: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20160609134555.GA9104@proton.igk.intel.com
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
This is a simple check before updating the superblock. It should update
the superblock when update_size return 0.
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Add a disk to an array which is performing recovery
is a little complicated, we need to do both reap the
sync thread and perform add disk for the case, then
it caused deadlock as follows.
linux44:~ # ps aux|grep md|grep D
root 1822 0.0 0.0 0 0 ? D 16:50 0:00 [md127_resync]
root 1848 0.0 0.0 19860 952 pts/0 D+ 16:50 0:00 mdadm --manage /dev/md127 --re-add /dev/vdb
linux44:~ # cat /proc/1848/stack
[<ffffffff8107afde>] kthread_stop+0x6e/0x120
[<ffffffffa051ddb0>] md_unregister_thread+0x40/0x80 [md_mod]
[<ffffffffa0526e45>] md_reap_sync_thread+0x15/0x150 [md_mod]
[<ffffffffa05271e0>] action_store+0x260/0x270 [md_mod]
[<ffffffffa05206b4>] md_attr_store+0xb4/0x100 [md_mod]
[<ffffffff81214a7e>] sysfs_write_file+0xbe/0x140
[<ffffffff811a6b98>] vfs_write+0xb8/0x1e0
[<ffffffff811a75b8>] SyS_write+0x48/0xa0
[<ffffffff8152a5c9>] system_call_fastpath+0x16/0x1b
[<00007f068ea1ed30>] 0x7f068ea1ed30
linux44:~ # cat /proc/1822/stack
[<ffffffffa05251a6>] md_do_sync+0x846/0xf40 [md_mod]
[<ffffffffa052402d>] md_thread+0x16d/0x180 [md_mod]
[<ffffffff8107ad94>] kthread+0xb4/0xc0
[<ffffffff8152a518>] ret_from_fork+0x58/0x90
Task1848 Task1822
md_attr_store (held reconfig_mutex by call mddev_lock())
action_store
md_reap_sync_thread
md_unregister_thread
kthread_stop md_wakeup_thread(mddev->thread);
wait_event(mddev->sb_wait, !test_bit(MD_CHANGE_PENDING))
md_check_recovery is triggered by wakeup mddev->thread,
but it can't clear MD_CHANGE_PENDING flag since it can't
get lock which was held by md_attr_store already.
To solve the deadlock problem, we move "->resync_finish()"
from md_do_sync to md_reap_sync_thread (after md_update_sb),
also MD_HELD_RESYNC_LOCK is introduced since it is possible
that node can't get resync lock in md_do_sync.
Then we do not need to wait for MD_CHANGE_PENDING is cleared
or not since metadata should be updated after md_update_sb,
so just call resync_finish if MD_HELD_RESYNC_LOCK is set.
We also unified the code after skip label, since set PENDING
for non-clustered case should be harmless.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
In current handle_stripe_dirtying, the code prefers rmw with
PARITY_ENABLE_RMW; while prefers rcw with PARITY_PREFER_RMW.
This patch reverses this behavior.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Pull x86 fixes from Ingo Molnar:
"Misc fixes: EFI, entry code, pkeys and MPX fixes, TASK_SIZE cleanups
and a tsc frequency table fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Switch from TASK_SIZE to TASK_SIZE_MAX in the page fault code
x86/fsgsbase/64: Use TASK_SIZE_MAX for FSBASE/GSBASE upper limits
x86/mm/mpx: Work around MPX erratum SKD046
x86/entry/64: Fix stack return address retrieval in thunk
x86/efi: Fix 7-parameter efi_call()s
x86/cpufeature, x86/mm/pkeys: Fix broken compile-time disabling of pkeys
x86/tsc: Add missing Cherrytrail frequency to the table
Pull scheduler fixes from Ingo Molnar:
"Two fixes: one for a lost wakeup, the other to fix the compiler
optimizing out preempt operations on ARM64 (and possibly other non-x86
architectures)"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Fix remote wakeups
sched/preempt: Fix preempt_count manipulations
Pull perf updates from Ingo Molnar:
"Mostly tooling and PMU driver fixes, but also a number of late updates
such as the reworking of the call-chain size limiting logic to make
call-graph recording more robust, plus tooling side changes for the
new 'backwards ring-buffer' extension to the perf ring-buffer"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
perf record: Read from backward ring buffer
perf record: Rename variable to make code clear
perf record: Prevent reading invalid data in record__mmap_read
perf evlist: Add API to pause/resume
perf trace: Use the ptr->name beautifier as default for "filename" args
perf trace: Use the fd->name beautifier as default for "fd" args
perf report: Add srcline_from/to branch sort keys
perf evsel: Record fd into perf_mmap
perf evsel: Add overwrite attribute and check write_backward
perf tools: Set buildid dir under symfs when --symfs is provided
perf trace: Only auto set call-graph to "dwarf" when syscalls are being traced
perf annotate: Sort list of recognised instructions
perf annotate: Fix identification of ARM blt and bls instructions
perf tools: Fix usage of max_stack sysctl
perf callchain: Stop validating callchains by the max_stack sysctl
perf trace: Fix exit_group() formatting
perf top: Use machine->kptr_restrict_warned
perf trace: Warn when trying to resolve kernel addresses with kptr_restrict=1
perf machine: Do not bail out if not managing to read ref reloc symbol
perf/x86/intel/p4: Trival indentation fix, remove space
...
Pull objtool build fix from Ingo Molnar:
"An libtool fix for older libelf versions"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Allow building with older libelf
Pull vfs iov_iter regression fix from Al Viro:
"Fix for braino in 'fold checks into iterate_and_advance()'"
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do "fold checks into iterate_and_advance()" right
Pull vfs xattr regression fixes from Al Viro.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make xattr_resolve_handlers() safe to use with NULL ->s_xattr
xattr: Fail with -EINVAL for NULL attribute names
Pull ACPI fix from Rafael Wysocki:
"Additional ACPI update for v4.7-rc1
Just one fix for incorrect async_synchronize_cookie() usage in the
ACPI battery driver (Chris Wilson)"
* tag 'acpi-4.7-rc1-more' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / battery: Correctly serialise with the pending async probe
Pull more power management updates from Rafael Wysocki:
"These are two stable-candidate fixes (PM core, cpuidle) and a bunch of
cpufreq cleanups.
Specifics:
- Stable-candidate cpuidle fix to make it check the right variable
when deciding whether or not to enable interrupts on the local CPU
so as to avoid enabling iterrupts too early in some cases if the
system has both coupled and per-core idle states (Daniel Lezcano).
- Stable-candidate PM core fix to make it handle failures at the
"late suspend" stage of device suspend consistently for all devices
regardless of whether or not async suspend/resume is enabled for
them (Rafael Wysocki).
- Cleanups in the cpufreq core, the schedutil governor and the
intel_pstate driver (Rafael Wysocki, Pankaj Gupta, Viresh Kumar)"
* tag 'pm-4.7-rc1-more' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / sleep: Handle failures in device_suspend_late() consistently
cpufreq: schedutil: Improve prints messages with pr_fmt
cpuidle: Fix cpuidle_state_is_coupled() argument in cpuidle_enter()
cpufreq: simplified goto out in cpufreq_register_driver()
cpufreq: governor: CPUFREQ_GOV_STOP never fails
cpufreq: governor: CPUFREQ_GOV_POLICY_EXIT never fails
intel_pstate: Simplify conditional in intel_pstate_set_policy()
the only case when we should skip the iterate_and_advance() guts
is when nothing's left in the iterator, _not_ just when requested
amount is 0. Said guts will do nothing in the latter case anyway;
the problem we tried to deal with in the aforementioned commit is
that when there's nothing left *and* the amount requested is 0,
we might end up deferencing one iovec too many; the value we fetch
from there is discarded in that case, but theoretically it might
oops if the iovec array ends exactly at the end of page with the
next page not mapped.
Bailing out on zero size requested had an unexpected side effect -
zero-length segment in the beginning of iovec array ended up
throwing do_loop_readv_writev() into infinite spin; we do not
advance past the empty segment at all. Reproducer is trivial:
echo '#include <sys/uio.h>' >a.c
echo 'main() {char c; struct iovec v[] = {{&c,0},{&c,1}}; readv(0,v,2);}' >>a.c
cc a.c && ./a.out </proc/uptime
which should end up with the process not hanging. Probably ought to
go into LTP or xfstests...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Commit 98e9cb57 improved the xattr name checks in xattr_resolve_name but
didn't update the NULL attribute name check appropriately, so NULL
attribute names lead to NULL pointer dereferences. Turn that into
-EINVAL results instead.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
fs/xattr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull pwm updates from Thierry Reding:
"This set of changes introduces an atomic API to the PWM subsystem.
This is influenced by the DRM atomic API that was introduced a while
back, though it is obviously a lot simpler. The fundamental idea
remains the same, though: drivers provide a single callback to
implement the atomic configuration of a PWM channel.
As a side-effect the PWM subsystem gains the ability for initial state
retrieval, so that the logical state mirrors that of the hardware.
Many use-cases don't care about this, but for others it is essential.
These new features require changes in all users, which these patches
take care of. The core is transitioned to use the atomic callback if
available and provides a fallback mechanism for other drivers.
Changes to transition users and drivers to the atomic API are
postponed to v4.8"
* tag 'pwm/for-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (30 commits)
pwm: Add information about polarity, duty cycle and period to debugfs
pwm: Switch to the atomic API
pwm: Update documentation
pwm: Add core infrastructure to allow atomic updates
pwm: Add hardware readout infrastructure
pwm: Move the enabled/disabled info into pwm_state
pwm: Introduce the pwm_state concept
pwm: Keep PWM state in sync with hardware state
ARM: Explicitly apply PWM config extracted from pwm_args
drm: i915: Explicitly apply PWM config extracted from pwm_args
input: misc: pwm-beeper: Explicitly apply PWM config extracted from pwm_args
input: misc: max8997: Explicitly apply PWM config extracted from pwm_args
backlight: lm3630a: explicitly apply PWM config extracted from pwm_args
backlight: lp855x: Explicitly apply PWM config extracted from pwm_args
backlight: lp8788: Explicitly apply PWM config extracted from pwm_args
backlight: pwm_bl: Use pwm_get_args() where appropriate
fbdev: ssd1307fb: Use pwm_get_args() where appropriate
regulator: pwm: Use pwm_get_args() where appropriate
leds: pwm: Use pwm_get_args() where appropriate
input: misc: max77693: Use pwm_get_args() where appropriate
...
Pull watchdog updates from Wim Van Sebroeck:
- add support for Fintek F81865 Super-IO chip
- add support for watchdogs (RWDT and SWDT) found on RCar Gen3 based
SoCs from Renesas
- octeon: Handle the FROZEN hot plug notifier actions
- f71808e_wdt fixes and cleanups
- some small improvements in code and documentation
* git://www.linux-watchdog.org/linux-watchdog:
MAINTAINERS: Add file patterns for watchdog device tree bindings
Documentation: Add ebc-c384_wdt watchdog-parameters.txt entry
watchdog: shwdt: Use setup_timer()
watchdog: cpwd: Use setup_timer()
arm64: defconfig: enable Renesas Watchdog Timer
watchdog: renesas-wdt: add driver
watchdog: remove error message when unable to allocate watchdog device
watchdog: f71808e_wdt: Fix WDTMOUT_STS register read
watchdog: f71808e_wdt: Fix typo
watchdog: f71808e_wdt: Add F81865 support
watchdog: sp5100_tco: properly check for new register layouts
watchdog: core: Fix circular locking dependency
watchdog: core: fix trivial typo in a comment
watchdog: hpwdt: Adjust documentation to match latest kernel module parameters.
watchdog: imx2_wdt: add external reset support via dt prop
watchdog: octeon: Handle the FROZEN hot plug notifier actions.
watchdog: qcom: Report reboot reason
Pull VFIO updates from Alex Williamson:
- Hide INTx on certain known broken devices (Alex Williamson)
- Additional backdoor reset detection (Alex Williamson)
- Remove unused iommudata reference (Alexey Kardashevskiy)
- Use cfg_size to avoid probing extended config space (Alexey
Kardashevskiy)
* tag 'vfio-v4.7-rc1' of git://github.com/awilliam/linux-vfio:
vfio_pci: Test for extended capabilities if config space > 256 bytes
vfio_iommu_spapr_tce: Remove unneeded iommu_group_get_iommudata
vfio/pci: Add test for BAR restore
vfio/pci: Hide broken INTx support from user
Pull header warning fix from Dave Airlie:
"Here is the C++ guards warning fix from Arnd"
[ Background: there are 'extern "C" { }' guards in include/uapi for the
GPU headers.
They should arguably be wrapped somehow, but as it is they caused
checkpatch to warn because it would trigger on the 'extern' and think
it's exporting a function or variable from the kernel to user space.
This just fixes checkpatch. Whether we wrap the C++ guards some way
in the future will be an independent issue. ]
* tag 'drm-4.7-rc1-headers-fix' of git://people.freedesktop.org/~airlied/linux:
headers_check: don't warn about c++ guards
Pull parisc updates from Helge Deller:
- Add native high-resolution timing code for sched_clock() and other
timing functions based on the processor internal cr16 cycle counters
- Add syscall tracepoint support
- Add regset support
- Speed up get_user() and put_user() functions
- Updated futex.h to match generic implementation (John David Anglin)
- A few smaller ftrace build fixes
- Fixed thuge-gen kernel self test to utilize architectured MAP_HUGETLB
value
- Added parisc architecture to seccomp_bpf kernel self test
- Various typo fixes (Andrea Gelmini)
* 'parisc-4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Whitespace cleanups in unistd.h
parisc: Use long jump to reach ftrace_return_to_handler()
parisc: Fix typo in fpudispatch.c
parisc: Fix typos in eisa_eeprom.h
parisc: Fix typo in ldcw.h
parisc: Fix typo in pdc.h
parisc: Update futex.h to match generic implementation
parisc: Merge ftrace C-helper and assembler functions into .text.hot section
selftests/thuge-gen: Use platform specific MAP_HUGETLB value
parisc: Add native high-resolution sched_clock() implementation
parisc: Add ARCH_TRACEHOOK and regset support
parisc: Add 64bit get_user() and put_user() for 32bit kernel
parisc: Simplify and speed up get_user() and put_user()
parisc: Add syscall tracepoint support
Pull ARM SoC fixes from Arnd Bergmann:
"This is a first set of bug fixes on top of what was merged for 4.7.
Two patches for lpc32xx address a harmless build warning that was just
introduced, one patch for the mediatek soc driver fixes a warning for
arm64, and the pxa changes are minor cleanups that should have been
part of the original pull requests but that I forgot to apply to the
cleanup-fixes branch earlier"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: lpc32xx: fix NR_IRQS confict
ARM: lpc32xx: remove legacy irq controller driver
soc: mtk-pmic-wrap: avoid integer overflow warning
ARM: pxa: Remove CLK_IS_ROOT
ARM: pxa: activate pinctrl for device-tree machines
Pull ARM SoC late DT updates from Arnd Bergmann:
"This is a collection of a few late fixes and other misc stuff that had
dependencies on things being merged from other trees.
The Renesas R-Car power domain handling, and the Nvidia Tegra USB
support both hand notable changes that required changing the DT
binding in a way that only provides compatibility with old DT blobs on
new kernels but not vice versa. As a consequence, the DT changes are
based on top of the driver changes and are now in this branch.
For NXP i.MX and Samsung Exynos, the changes in here depend on other
changes that got merged through the clk maintainer tree"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits)
ARM: dts: exynos: Add support of Bus frequency using VDD_INT for exynos5422-odroidxu3
ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos542x SoC
ARM: dts: exynos: Add NoC Probe dt node for Exynos542x SoC
ARM: dts: exynos: Add support of bus frequency for exynos4412-trats/odroidu3
ARM: dts: exynos: Expand the voltage range of buck1/3 regulator for exynos4412-odroidu3
ARM: dts: exynos: Add support of bus frequency using VDD_INT for exynos3250-rinato
ARM: dts: exynos: Add exynos4412-ppmu-common dtsi to delete duplicate PPMU nodes
ARM: dts: exynos: Add bus nodes using VDD_MIF for Exynos4210
ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos4x12
ARM: dts: exynos: Add bus nodes using VDD_MIF for Exynos4x12
ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos3250
ARM: dts: exynos: Add DMC bus frequency for exynos3250-rinato/monk
ARM: dts: exynos: Add DMC bus node for Exynos3250
ARM: tegra: Enable XUSB on Nyan
ARM: tegra: Enable XUSB on Jetson TK1
ARM: tegra: Enable XUSB on Venice2
ARM: tegra: Add Tegra124 XUSB controller
ARM: tegra: Move Tegra124 to the new XUSB pad controller binding
ARM: dts: r8a7794: Use SYSC "always-on" PM Domain
ARM: dts: r8a7793: Use SYSC "always-on" PM Domain
...
Pull asm-generic cleanup from Arnd Bergmann:
"I have only one patch for asm-generic in this release, this one is
from James Hogan and updates the generic system call table for
renameat2 so we don't need to provide both renameat and renameat2 in
newly added architectures"
* tag 'asm-generic-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: Drop renameat syscall from default list
Pull nfsd updates from Bruce Fields:
"A very quiet cycle for nfsd, mainly just an RDMA update from Chuck
Lever"
* tag 'nfsd-4.7' of git://linux-nfs.org/~bfields/linux:
sunrpc: fix stripping of padded MIC tokens
svcrpc: autoload rdma module
svcrdma: Generalize svc_rdma_xdr_decode_req()
svcrdma: Eliminate code duplication in svc_rdma_recvfrom()
svcrdma: Drain QP before freeing svcrdma_xprt
svcrdma: Post Receives only for forward channel requests
svcrdma: Remove superfluous line from rdma_read_chunks()
svcrdma: svc_rdma_put_context() is invoked twice in Send error path
svcrdma: Do not add XDR padding to xdr_buf page vector
svcrdma: Support IPv6 with NFS/RDMA
nfsd: handle seqid wraparound in nfsd4_preprocess_layout_stateid
Remove unnecessary allocation
Pull ext4 updates from Ted Ts'o:
"Fix a number of bugs, most notably a potential stale data exposure
after a crash and a potential BUG_ON crash if a file has the data
journalling flag enabled while it has dirty delayed allocation blocks
that haven't been written yet. Also fix a potential crash in the new
project quota code and a maliciously corrupted file system.
In addition, fix some DAX-specific bugs, including when there is a
transient ENOSPC situation and races between writes via direct I/O and
an mmap'ed segment that could lead to lost I/O.
Finally the usual set of miscellaneous cleanups"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
ext4: pre-zero allocated blocks for DAX IO
ext4: refactor direct IO code
ext4: fix race in transient ENOSPC detection
ext4: handle transient ENOSPC properly for DAX
dax: call get_blocks() with create == 1 for write faults to unwritten extents
ext4: remove unmeetable inconsisteny check from ext4_find_extent()
jbd2: remove excess descriptions for handle_s
ext4: remove unnecessary bio get/put
ext4: silence UBSAN in ext4_mb_init()
ext4: address UBSAN warning in mb_find_order_for_block()
ext4: fix oops on corrupted filesystem
ext4: fix check of dqget() return value in ext4_ioctl_setproject()
ext4: clean up error handling when orphan list is corrupted
ext4: fix hang when processing corrupted orphaned inode list
ext4: remove trailing \n from ext4_warning/ext4_error calls
ext4: fix races between changing inode journal mode and ext4_writepages
ext4: handle unwritten or delalloc buffers before enabling data journaling
ext4: fix jbd2 handle extension in ext4_ext_truncate_extend_restart()
ext4: do not ask jbd2 to write data for delalloc buffers
jbd2: add support for avoiding data writes during transaction commits
...
With the change to sparse IRQs, the lpc32xx platform gets a warning about
conflicting macros:
In file included from arch/arm/mach-lpc32xx/irq.c:31:0:
arch/arm/mach-lpc32xx/include/mach/irqs.h:115:0: warning: "NR_IRQS" redefined
#define NR_IRQS 96
arch/arm/include/asm/irq.h:9:0: note: this is the location of the previous definition
#define NR_IRQS NR_IRQS_LEGACY
One such instance was in the old irq driver that is now removed by
the previous patch, but any other file including mach/irqs.h still
has the issue. Since none of them use this constant, we can just
remove the old definition.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 8cb17b5ed0 ("irqchip: Add LPC32xx interrupt controller driver")
New NXP LPC32xx irq chip driver is used instead of a legacy one.
[this also fixes a harmless build warning about the NR_IRQS redefinition]
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull spi updates from Mark Brown:
"Another quiet release for SPI, almost entirely driver specific changes
with the diffstat dominated by two new drivers which are about two
thirds of it in terms of lines of code:
- new drivers for PIC32 standard and SQI controllers
- the Cadence driver has had runtime PM support added and quite a few
fixes and cleanups
- flash-specific accelerated path support now has a feature query
interface
- the pxa2xx driver has been moved to use the core DMA mapping support"
* tag 'spi-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (48 commits)
spi: pic32-sqi: Fix linker error, undefined reference to `bad_dma_ops'
spi: dw-pci: Spelling s/paltforms/platforms/g
spi: pic32-sqi: Remove pic32_sqi_setup and pic32_sqi_cleanup
spi: Fix simple typo s/impelment/implement
spi: rockchip: potential NULL dereference on error
spi: zynqmp: disable clocks in error paths
spi: Drop unnecessary dependencies on relaxed I/O accessors
spi: qup: Add spi_master_put in remove function
spi: qup: Handle clocks in pm_runtime suspend and resume
spi: st-ssc4: Fix missing spi_master_put in spi_st_probe error paths
spi: st-ssc4: Allow compile test build
spi: omap2-mcspi: Use dma_request_chan() for requesting DMA channel
spi: davinci: Use dma_request_chan() for requesting DMA channel
spi: pic32: Fix checking return value of devm_ioremap_resource
spi: spi-fsl-dspi: Update DT binding documentation
spi: Drop duplicate code to set master->dev.parent
spi: pic32: Set proper bits_per_word_mask
spi: return error if kmap'd buffers passed to spi_map_buf()
spi: core: add hook flash_read_supported to spi_master
spi: pic32-sqi: silence array overflow warning
...
Pull MTD updates from Brian Norris:
"First cycle with Boris as NAND maintainer! Many (most) bullets stolen
from him.
Generic:
- Migrated NAND LED trigger to be a generic MTD trigger
NAND:
- Introduction of the "ECC algorithm" concept, to avoid overloading
the ECC mode field too much more
- Replaced the nand_ecclayout infrastructure with something a little
more flexible (finally!) and future proof
- Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some
of this into their own tree as well
- Prepare the sunxi NAND driver to receive DMA support
- Handle bitflips in erased pages on GPMI revisions that do not
support this in hardware.
SPI NOR:
- Start using the spi_flash_read() API for SPI drivers that support
it (i.e., SPI drivers with special memory-mapped flash modes)
And other small scattered improvments"
* tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits)
mtd: spi-nor: support GigaDevice gd25lq64c
mtd: nand_bch: fix spelling of "probably"
mtd: brcmnand: respect ECC algorithm set by NAND subsystem
gpmi-nand: Handle ECC Errors in erased pages
Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value
mtd: nand: add support for "nand-ecc-algo" DT property
mtd: mtd: drop NAND_ECC_SOFT_BCH enum value
mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping
mtd: nand: read ECC algorithm from the new field
mtd: nand: fsmc: validate ECC setup by checking algorithm directly
mtd: nand: set ECC algorithm to Hamming on fallback
staging: mt29f_spinand: set ECC algorithm explicitly
CRIS v32: nand: set ECC algorithm explicitly
mtd: nand: atmel: set ECC algorithm explicitly
mtd: nand: davinci: set ECC algorithm explicitly
mtd: nand: bf5xx: set ECC algorithm explicitly
mtd: nand: omap2: Fix high memory dma prefetch transfer
mtd: nand: omap2: Start dma request before enabling prefetch
mtd: nandsim: add __init attribute
mtd: nand: move of_get_nand_xxx() helpers into nand_base.c
...
Pull xen bug fixes from David Vrabel.
* tag 'for-linus-4.7-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: use same main loop for counting and remapping pages
xen/events: Don't move disabled irqs
xen/x86: actually allocate legacy interrupts on PV guests
Xen: don't warn about 2-byte wchar_t in efi
xen/gntdev: reduce copy batch size to 16
xen/x86: don't lose event interrupts
Pull virtio updates from Michael Tsirkin:
"Looks like a quiet cycle for virtio. There's a new inorder option for
the ringtest tool, and a bugfix for balloon for ppc platforms when
using virtio 1 mode"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
ringtest: pass buf != NULL
virtio_balloon: fix PFN format for virtio-1
virtio: add inorder option
Pull Microblaze updates from Michal Simek:
- Wire-up new syscalls
- Fix link error
* tag 'microblaze-4.7-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: pci: export isa_io_base to fix link errors
microblaze: Wire up userfaultfd, membarrier, mlock2 syscalls
