William writes:
First set of Counter updates for the 6.8 cycle
A new Counter tool is introduced to provide a generic and flexible way
to watch Counter device events from userspace.
* tag 'counter-updates-for-6.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
tools/counter: Remove unneeded semicolon
tools/counter: Fix spelling mistake "componend" -> "component"
MAINTAINERS: add myself as counter watch events tool maintainer
tools/counter: add a flexible watch events tool
Xu writes:
FPGA Manager changes for 6.8-rc1 second part
Not sure if it's too late for 6.8 rc1, but I try to speed up this
intermediate change.
- Uwe's change convert to new platform remove callback.
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: zynq-fpga: Convert to platform remove callback returning void
fpga: xilinx-pr-decoupler: Convert to platform remove callback returning void
fpga: stratix10-soc: Convert to platform remove callback returning void
fpga: socfpga-a10: Convert to platform remove callback returning void
fpga: of-fpga-region: Convert to platform remove callback returning void
fpga: intel-m10-bmc-sec-update: Convert to platform remove callback returning void
fpga: dfl-fme-region: Convert to platform remove callback returning void
fpga: dfl-fme-main: Convert to platform remove callback returning void
fpga: dfl-fme-br: Convert to platform remove callback returning void
fpga: dfl-afu-main: Convert to platform remove callback returning void
fpga: altera-hps2fpga: Convert to platform remove callback returning void
fpga: altera-freeze-bridge: Convert to platform remove callback returning void
fpga: altera-fpga2sdram: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/e63d4155f96f3504f7e3d6a4775c3807c90dd6ce.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/3e37e7cf91749fbaba67619f4ffc6a9a7352a671.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/ab8328e82109b6ef14b2ad59889aee5f99264435.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/da701d72522dde185becc15096342786a3a12153.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/1ff30f297310bf048af567924c0fd4cb7c6c3240.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/8d7b192ade744a70da4d7bc681ee4e00f9d04ba9.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/13187db1642f81f04e55be0a26045f09ccc95d37.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/438bb4797984fbfd0cef501010a64fa1e42ad9f4.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/be0728ae8e047c6b443492dc563cf92f397b269d.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/351a4508a2feeba05b2c311fa8596ca1ad77f467.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/7a56558f7e5aa34bf0b21d22f9036a136a2b7322.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/7f4fcb23b25400c6711848105823081e032c5266.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/017b9e17a0c88b2a633467633d304639e7765926.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Krzysztof writes:
1-Wire bus drivers for v6.8
1. Add new AMD AXI 1-wire host driver for AMD programmable logic IP
core.
2. Add support for Analog Devices DS28EC20 EEPROM to existing DS2433
driver.
3. Few cleanups in W1 GPIO driver.
* tag 'w1-drv-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1:
w1: ds2433: add support for ds28ec20 eeprom
w1: ds2433: use the kernel bitmap implementation
w1: ds2433: introduce a configuration structure
w1: ds2433: remove unused definitions
w1: ds2490: support block sizes larger than 128 bytes in ds_read_block
w1: amd_axi_w1: Explicitly include correct DT includes
w1: gpio: rename pointer to driver data from pdata to ddata
w1: gpio: Drop unused enable_external_pullup from driver data
w1: gpio: Don't use platform data for driver data
w1: Add AXI 1-wire host driver for AMD programmable logic IP core
dt-bindings: w1: Add AMD AXI w1 host and MAINTAINERS entry
Jonathan writes:
1st set of IIO new device support, features and cleanup for 6.8
New device support
------------------
adi,hmc425a
* Add support for ADRF5740 attenuators. Minor changes to driver needed
alongside new IDs.
aosong,ags02ma
* New driver for this volatile organic compounds sensor.
bosch,bmp280
* Add BMP390 (small amount of refactoring + ID)
bosch,bmi323
* New driver to support the BMI323 6-axis IMU.
honeywell,hsc030pa
* New driver supporting a huge number of SSC and HSC series pressure and
temperature sensors.
isil,isl76682
* New driver for this simple Ambient Light sensor.
liteon,ltr390
* New driver for this ambient and ultraviolet light sensor.
maxim,max34408
* New driver to support the MAX34408 and MAX34409 current monitoring ADCs.
melexis,mlx90635
* New driver for this Infrared contactless temperature sensor.
mirochip,mcp9600
* New driver for this thermocouple EMF convertor.
ti,hdc3020
* New driver for this integrated relative humidity and temperature
sensor.
vishay,veml6075
* New driver for this UVA and UVB light sensor.
General features
----------------
Device properties
* Add fwnode_property_match_property_string() helper to allow matching
single value property against an array of predefined strings.
* Use fwnode_property_string_array_count() inside
fwnode_property_match_string() instead of open coding the same.
checkpatch.pl
* Add exclusion of __aligned() from a warning reducing false positives
on IIO drivers (and hopefully beyond)
IIO Features
------------
core
* New light channel modifiers for UVA and UVB.
* Add IIO_CHAN_INFO_TROUGH as counterpart to IIO_CHAN_INFO_PEAK so that
we can support device that keep running track of the lowest value they
have seen in similar fashion to the existing peak tracking.
adi,adis library
* Use spi cs inactive delay even when a burst reading is performed.
As it's now used every time, can centralize the handling in the SPI
setup code in the driver.
adi,ad2s1210
* Support for fixed-mode to this resolver driver where the A0 and A1
pins are hard wired to config mode in which case position and config
must be read from appropriate config registers.
* Support reset GPIO if present.
adi,ad5791
* Allow configuration of presence of external amplifier in DT binding.
adi,adis16400
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
adi,adis16475
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
bosch,bmp280
* Enable multiple chip IDs per family of devices.
rohm,bu27008
* Add an illuminance channel calculated from RGB and IR data.
Cleanup
-------
Minor white space, typos and tidy up not explicitly called out.
Core
* Check that the available_scan_masks array passed to the IIO core
by a driver is sensible by ensuring the entries are ordered so the
minimum number of channels is enabled in the earlier entries (as they
will be selected if sufficient for the requested channels).
* Document that the available_scan_masks infrastructure doesn't currently
handle masks that don't fit in a long int.
* Improve intensity documentation to reflect that there is no expectation
of sensible units (it's dependent on a frequency sensitivity curve)
Various
* Use new device_property_match_property_string() to replace open coded
versions of the same thing.
* Fix a few MAINTAINERS filenames.
* i2c_get_match_data() and spi_get_device_match_data() pushed into
more drivers reducing boilerplate handling.
* Some unnecessary headers removed.
* ACPI_PTR() removals. It's rarely worth using this.
adi,ad7091r (early part of a series adding device support - useful in
their own right)
* Pass iio_dev directly an event handler rather than relying
on broken use of dev_get_drvdata() as drvdata is never set in this driver.
* Make sure alert is turned on.
adi,ad9467 (general driver fixing up as precursor to iio-backend proposal
which is under review for 6.9)
* Fix reset gpio handling to match expected polarity.
* Always handle error codes from spi_writes.
* Add a driver instance local mutex to avoid some races.
* Fix scale setting to align with available scale values.
* Split array of chip_info structures up into named individual elements.
* Convert to regmap.
honeywell,mprls0025pa
* Drop now unnecessary type references in DT binding for properties in
pascals.
invensense,mpu6050
* Don't eat a potentially useful return value from regmap_bulk_write()
invensense,icm42600
* Use max macro to improve code readability and save a few lines.
liteon,ltrf216a
* Improve prevision of light intensity.
microchip,mcp3911
* Use cleanup.h magic.
qcom,spmi*
* Fix wrong descriptions of SPMI reg fields in bindings.
Other
----
mailmap
* Update for Matt Ranostay
* tag 'iio-for-6.8a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (83 commits)
iio: adc: ad7091r: Align arguments to function call parenthesis
iio: adc: ad7091r: Set alert bit in config register
iio: adc: ad7091r: Pass iio_dev to event handler
scripts: checkpatch: Add __aligned to the list of attribute notes
iio: chemical: add support for Aosong AGS02MA
dt-bindings: iio: chemical: add aosong,ags02ma
dt-bindings: vendor-prefixes: add aosong
iio: accel: bmi088: update comments and Kconfig
dt-bindings: iio: humidity: Add TI HDC302x support
iio: humidity: Add driver for ti HDC302x humidity sensors
iio: ABI: document temperature and humidity peak/trough raw attributes
iio: core: introduce trough info element for minimum values
iio: light: driver for Lite-On ltr390
dt-bindings: iio: light: add ltr390
iio: light: isl76682: remove unreachable code
iio: pressure: driver for Honeywell HSC/SSC series
dt-bindings: iio: pressure: add honeywell,hsc030
doc: iio: Document intensity scale as poorly defined
dt-bindings: iio: temperature: add MLX90635 device
iio: temperature: mlx90635 MLX90635 IR Temperature sensor
...
The ds28ec20 eeprom is (almost) backward compatible with the
ds2433. The only differences are:
- the eeprom size is now 2560 bytes instead of 512;
- the number of pages is now 80 (same page size as the ds2433: 256 bits);
- the programming time has increased from 5ms to 10ms;
This patch adds support for the ds28ec20 to the ds2433 driver. From
the datasheet: The DS28EC20 provides a high degree of backward
compatibility with the DS2433. Besides the different family codes, the
only protocol change that is required on an existing DS2433
implementation is a lengthening of the programming duration (tPROG)
from 5ms to 10ms.
dmesg now returns:
w1_master_driver w1_bus_master1: Attaching one wire slave 43.000000478756 crc e0
instead of:
w1_master_driver w1_bus_master1: Attaching one wire slave 43.000000478756 crc e0
w1_master_driver w1_bus_master1: Family 43 for 43.000000478756.e0 is not registered.
Test script writing/reading random data (CONFIG_W1_SLAVE_DS2433_CRC is
not set):
#!/bin/sh
EEPROM=/sys/bus/w1/devices/43-000000478756/eeprom
BINFILE1=/home/root/file1.bin
BINFILE2=/home/root/file2.bin
for BS in 1 2 3 4 8 16 32 64 128 256 512 1024 2560; do
dd if=/dev/random of=${BINFILE1} bs=${BS} count=1 status=none
dd if=${BINFILE1} of=${EEPROM} status=none
dd if=${EEPROM} of=${BINFILE2} bs=${BS} count=1 status=none
if ! cmp --silent ${BINFILE1} ${BINFILE2}; then
echo file1
hexdump ${BINFILE1}
echo file2
hexdump ${BINFILE2}
echo FAIL
exit 1
fi
echo "${BS} OK!"
done
Results:
# ./test.sh
1 OK!
2 OK!
3 OK!
4 OK!
8 OK!
16 OK!
32 OK!
64 OK!
128 OK!
256 OK!
512 OK!
1024 OK!
2560 OK!
Tests with CONFIG_W1_SLAVE_DS2433_CRC=y:
$ cat /proc/config.gz | gunzip | grep CONFIG_W1_SLAVE_DS2433
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
# create a 32 bytes block with a crc, i.e.:
00000000 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 40 |123456789:;<=>?@|
00000010 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e ba 63 |ABCDEFGHIJKLMN.c|
# fill all 80 blocks
$ dd if=test.bin of=/sys/bus/w1/devices/43-000000478756/eeprom bs=32 count=80
# read back all blocks, i.e.:
$ hexdump -C /sys/bus/w1/devices/43-000000478756/eeprom
00000000 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 40 |123456789:;<=>?@|
00000010 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e ba 63 |ABCDEFGHIJKLMN.c|
00000020 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 40 |123456789:;<=>?@|
00000030 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e ba 63 |ABCDEFGHIJKLMN.c|
...
000009e0 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 40 |123456789:;<=>?@|
000009f0 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e ba 63 |ABCDEFGHIJKLMN.c|
00000a00
Note: both memories (ds2433 and ds28ec20) have been tested with the
new driver.
Signed-off-by: Marc Ferland <marc.ferland@sonatest.com>
Co-developed-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Link: https://lore.kernel.org/r/20231218150230.1992448-6-marc.ferland@sonatest.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The ds2433 driver uses the 'validcrc' variable to mark out which pages
have been successfully (crc is valid) retrieved from the eeprom and
placed in the internal 'memory' buffer (see CONFIG_W1_SLAVE_DS2433_CRC).
The current implementation assumes that the number of pages will never
go beyond 32 pages (bit field is a u32). This is fine for the ds2433
since it only has 16 pages.
On the ds28ec20 though, the number of pages increases to 80 which will
not fit on a single u32.
As a solution, I replaced the u32 variable with a standard bitmap and
set the number of bits to 32 which is the same size we had before.
Signed-off-by: Marc Ferland <marc.ferland@sonatest.com>
Link: https://lore.kernel.org/r/20231218150230.1992448-5-marc.ferland@sonatest.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add a ds2433_config structure for parameters that are different
between the ds2433 and the ds28ec20. The goal is to reuse the same
code for both chips.
A pointer to this config structure is added to w1_f23_data and the
CONFIG_W1_SLAVE_DS2433_CRC ifdefs are adjusted since now both driver
configurations (with or without crc support) will make use of
w1_f23_data.
Also, the 'memory' buffer is now dynamically allocated based on the
size specififed in the config structure to help support memories of
different sizes.
Signed-off-by: Marc Ferland <marc.ferland@sonatest.com>
Link: https://lore.kernel.org/r/20231218150230.1992448-4-marc.ferland@sonatest.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The current ds_read_block function only supports block sizes up to
128 bytes, which is the depth of the 'data out' fifo on the ds2490.
Reading larger blocks will fail with a: -110 (ETIMEDOUT) from
usb_control_msg(). Example:
$ dd if=/sys/bus/w1/devices/43-000000478756/eeprom bs=256 count=1
yields to the following message from the kernel:
usb 5-1: Failed to write 1-wire data to ep0x2: err=-110.
I discovered this issue while implementing support for the ds28ec20
eeprom in the w1-2433 driver. This driver accepts reading blocks of
sizes up to the size of the entire memory (2560 bytes in the case of
the ds28ec20). Note that this issue _does not_ arise when the kernel
is configured with CONFIG_W1_SLAVE_DS2433_CRC enabled since in this
mode the driver reads one 32 byte block at a time (a single memory
page).
Also, from the ds2490 datasheet (2995.pdf, page 22, BLOCK I/O
command):
For a block write sequence the EP2 FIFO must be pre-filled with
data before command execution. Additionally, for block sizes
greater then the FIFO size, the FIFO content status must be
monitored by host SW so that additional data can be sent to the
FIFO when necessary. A similar EP3 FIFO content monitoring
requirement exists for block read sequences. During a block read
the number of bytes loaded into the EP3 FIFO must be monitored so
that the data can be read before the FIFO overflows.
Breaking the block in smaller 128 bytes chunks and simply calling the
original code sequence has solved the issue for me.
Tested with a DS1490F usb<->one-wire adapter and both the DS28EC20 and
DS2433 eeprom memories.
Signed-off-by: Marc Ferland <marc.ferland@sonatest.com>
Link: https://lore.kernel.org/r/20231218150230.1992448-2-marc.ferland@sonatest.com
[krzysztof: fix checkpatch 'spaces preferred around']
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Chanwoo writes:
Update extcon next for v6.8
Detailed description for this pull request:
1. Fix possible memory leak of device name in extcon_dev_register()
: Fix memory leak on error path of extcon_dev_register().
2. Set interrupt polarity based on device-tree for extcon-usbc-tusb320.c
:Remove 'IRQF_TRIGGER_FALLING' request which is not allowed on
every interrupt controller (i.e. arm64 GIC). Replace flag by a
request that depends on the actual device-tree setting.
3. Fix the comment style according to guide on extcon-qcom-spmi-misc.c.
* tag 'extcon-next-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: qcom-spmi-misc: don't use kernel-doc marker for comment
extcon: usbc-tusb320: Set interrupt polarity based on device-tree
extcon: fix possible name leak in extcon_dev_register()
Manivannan writes:
MHI Host
========
- Added alignment check for event ring read pointer to avoid the potential
buffer corruption issue.
- Added support for SDX75 modem which takes longer time to enter READY state.
- Added spinlock to protect concurrent access while queuing transfer ring
elements.
- Dropped the read channel lock before invoking the client callback as the
client can potentially queue buffers thus ending up wtih soft lockup.
MHI Endpoint
============
- Used kzalloc() to allocate event ring elements instead of allocating the
elements on the stack, as the endpoint controller trying to queue them may not
be able to use vmalloc memory (using DMA).
- Used slab allocator for allocting the memory for objects used frequently and
are of fixed size.
- Added support for interrupt moderation timer feature which is used by the host
to limit the number of interrupts raised by the device for an event ring.
- Added async read/write DMA support for transferring data between host and the
endpoint. So far MHI EP stack assumed that the data will be transferred
synchronously (i.e., it sends completion once the transfer APIs are returned).
But this impacts the throughput if the controller is using DMA to do the
transfer.
So to add async suport, existing sync transfer APIs are renamed to
{read/write}_sync and also introduced two new APIs {read/write}_async for
carrying out the async transfer.
Controllers implementing the async APIs should queue the buffers and return
immediately without waiting for transfer completion. Once the transfer
completion happens later, they should invoke the completion callback so that
the MHI EP stack can send the completion event to the host.
The controller driver patches (PCI EPF) for this async support are also merged
to the MHI tree with Acks from PCI maintainers.
- Fixed the DMA channel direction in error path of the PCI EPF driver.
* tag 'mhi-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: Drop chan lock before queuing buffers
bus: mhi: host: Add spinlock to protect WP access when queueing TREs
PCI: epf-mhi: Fix the DMA data direction of dma_unmap_single()
bus: mhi: ep: Add checks for read/write callbacks while registering controllers
bus: mhi: ep: Add support for async DMA read operation
bus: mhi: ep: Add support for async DMA write operation
PCI: epf-mhi: Enable MHI async read/write support
PCI: epf-mhi: Add support for DMA async read/write operation
PCI: epf-mhi: Simulate async read/write using iATU
bus: mhi: ep: Introduce async read/write callbacks
bus: mhi: ep: Rename read_from_host() and write_to_host() APIs
bus: mhi: ep: Pass mhi_ep_buf_info struct to read/write APIs
bus: mhi: ep: Add support for interrupt moderation timer
bus: mhi: ep: Use slab allocator where applicable
bus: mhi: host: Add alignment check for event ring read pointer
bus: mhi: host: pci_generic: Add SDX75 based modem support
bus: mhi: host: Add a separate timeout parameter for waiting ready
bus: mhi: ep: Do not allocate event ring element on stack
This adds a new counter tool to be able to test various watch events.
A flexible watch array can be populated from command line, each field
may be tuned with a dedicated command line sub-option in "--watch" string.
Several watch events can be defined, each can have specific watch options,
by using "--watch <watch 1 options> --watch <watch 2 options>".
Watch options is a comma separated list.
It also comes with a simple default watch (to monitor overflow/underflow
events), used when no watch parameters are provided. It's equivalent to:
counter_watch_events -w comp_count,scope_count,evt_ovf_udf
The print_usage() routine proposes another example, from the command line,
which generates a 2 elements watch array, to monitor:
- overflow underflow events
- capture events, on channel 3, that reads read captured data by
specifying the component id (capture3_component_id being 7 here).
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20231213173117.4174511-2-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Xu writes:
FPGA Manager changes for 6.8-rc1
DFL:
- Philipp's change uses memdup_array_user() to do better overflow check
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
drivers/fpga: use standard array-copy function
The ad7091r-base driver sets up an interrupt handler for firing events
when inputs are either above or below a certain threshold.
However, for the interrupt signal to come from the device it must be
configured to enable the ALERT/BUSY/GPO pin to be used as ALERT, which
was not being done until now.
Enable interrupt signals on the ALERT/BUSY/GPO pin by setting the proper
bit in the configuration register.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/e8da2ee98d6df88318b14baf3dc9630e20218418.1702746240.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
update the comments and Kconfig file with more descriptive and
accurate information about newly added device: BMI085, BMI090L.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
As per the current code base, PM_CLOCK_SETRATE and PM_CLOCK_GETRATE
APIs are not supported for the runtime operations. In the case of
ZynqMP returning an error from TF-A when there is any request to
access these APIs and for Versal also it is returning an error like
NO_ACCESS from the firmware. So, just removing the unused code to
avoid the confusion around these APIs.
Also, there is no issue with the backward compatibility as these APIs
were never used since implemented. Hence no need to bump up the
version of the feature check API as well.
Signed-off-by: Ronak Jain <ronak.jain@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/6ccbffbafd1f0f48f6574d5a3bf2db6a5603fdb0.1702565618.git.michal.simek@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
