The raspberrypi-firmware driver may be built as a loadable module,
which causes a link-time failure if the vc04_services driver is
built-in during compile-testing:
drivers/staging/vc04_services/vchiq.o: In function `vchiq_probe':
vchiq_connected.c:(.text.vchiq_probe+0x2c): undefined reference to `rpi_firmware_get'
drivers/staging/vc04_services/vchiq.o: In function `vchiq_platform_init':
vchiq_connected.c:(.text.vchiq_platform_init+0x1f0): undefined reference to `rpi_firmware_property'
This extends the dependency list to ensure the firmware is either
reachable, or completely disabled in case of compile-testing.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver tries to redefine mutex_lock_interruptible as an open-coded
mutex_lock_killable, but that definition clashes with the normal
mutex_lock_interruptible definition when CONFIG_DEBUG_LOCK_ALLOC
is set:
staging/vc04_services/interface/vchiq_arm/vchiq_killable.h:67:0: error: "mutex_lock_interruptible" redefined [-Werror]
#define mutex_lock_interruptible mutex_lock_interruptible_killable
include/linux/mutex.h:161:0: note: this is the location of the previous definition
This simply removes the private implementation and uses the
normal mutex_lock_killable directly.
We could do the same for the down_interruptible_killable here, but
it's better to just remove the semaphores entirely from the driver,
which also takes care of that.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With gcc-7, I got a new warning for this driver:
wilc1000/linux_wlan.c: In function 'wilc_netdev_cleanup':
wilc1000/linux_wlan.c:1224:15: error: 'vif[1]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
wilc1000/linux_wlan.c:1224:15: error: 'vif[0]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
A closer look at the function reveals that it's more complex than
it needs to be, given that based on how the device is created
we always get
netdev_priv(vif->ndev) == vif
Based on this assumption, I found a few other places in the same file
that can be simplified. That code appears to be a relic from times
when the assumption above was not valid.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan writes:
Third set of IIO new device support, features and cleanup for the 4.10 cycle.
Includes Peter Rosin's interesting drivers for a comparator. First complex
use we have had with an analog front end made from discrete components.
Brian Masney's work on moving the tsl2583 driver out of staging also
feature extensively!
New Drivers
* DAC based on a digital potentiometer
- New driver for the use of a dpot as a DAC. Includes bindings and Axentia
entry in vendor prefixes.
* Envelope detector baed on DAC and a comparator including device tree
bindings.
Staging Graduation
* tsl2583.
Core new features
- Core provision for _available attributes. This one had been stalled for
a long time until Peter picked it up and ran with it!
- In kernel interface helpers to retrieve available info from channels.
Driver new features
* mcp4531
- Add range of available raw values (used for the dpot dac driver).
Driver cleanups and fixes for issues introduced
* ad7766
- Testing the wrong variable following devm_regulator_bulk_get introduced
with the driver earlier in this cycle.
* ad9832
- Fix a wrong ordering in the probe introduced in the previous set of
patches. A use before allocation bug.
* cros_ec_sensors
- Testing for an error in a u8 will never work.
* mpu3050
- Remove duplicate initializer for the module owner.
- Add missing i2c dependency.
- Inform the i2c mux core how it is used - step one in implifying device
tree bindings.
* st-sensors
- Get rid of large number of uninformative defines in favour of putting the
constants where they are relevant. It is clear what they are from where
they are used.
* tsl2583
- Fix unused function warning when CONFIG_PM disabled and remove the
ifdefs in favour of __maybe_unused.
- Refactor taos_chip_on to only read relevant registers.
- Make sure calibscale and integration time are being set.
- Verify chip is in ready to be used before calibration.
- Remove some repeated checks for chip status (it's protected by a mutex
so can't change until it's released)
- Change current state storage from a tristate enum to a boolean seeing as
only two values are actually used now.
- Drop a redundant write to the control regiser in taos_probe (it's a noop)
- Drop the FSF mailing address.
- Clean up logging to not use hard coded function names (use __func__
instead).
- Cleanup up variable and function name prefixes.
- Alignment of #define fixes.
- Fix comparison between signed and unsigned integer warnings.
- Add some newlines in favour of readability.
- Combine the two sysfs ABI docs that somehow ended up in different places.
- Fix multiline comment syntax.
- Move a code block to inside an else statement as it makes more sense there.
- Change tsl2583_als_calibrate to return 0 rather than a value nothing
reads.
- Drop some pointless brackets
- Don't assume 32bit unsigned int.
- Change to a per device instance lux table.
- Add missing tsl2583 to the list of supported devices in the intro comments.
- Improve commment on clearing of interrupts.
- Drop some uninformative comments.
- Drop a memset call that doesn't do anything useful any more.
- Don't initialize some return variables that are always set.
- Add Brian Masney as a module author after all these changes.
Replace uint8_t, uint16_t and uint32_t with preferred kernel types
u8, u16 and u32 respectively suggested by checkpatch.pl
Signed-off-by: Punit Vara <punitvara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make suggested modification from checkpatch in reference
to: CHECK: spaces preferred around that '+'
Signed-off-by: Walt Feasel <waltfeasel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make suggested modification from checkpatch in reference
to: CHECK: Please use a blank line after
function/struct/union/enum declarations
Signed-off-by: Walt Feasel <waltfeasel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In `ni_ai_insn_read()`, local variable `dl` is declared as `unsigned
long`, but `unsigned int` will do. Get rid of it and use local variable
`d` instead. (That used to be `unsigned short`, but has been `unsigned
int` since kernel version 3.18.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 0557344e21 ("staging: comedi: ni_mio_common: fix local var for
32-bit read") changed the type of local variable `d` from `unsigned
short` to `unsigned int` to fix a bug introduced in
commit 9c340ac934 ("staging: comedi: ni_stc.h: add read/write
callbacks to struct ni_private") when reading AI data for NI PCI-6110
and PCI-6111 cards. Unfortunately, other parts of the function rely on
the variable being `unsigned short` when an offset value in local
variable `signbits` is added to `d` before writing the value to the
`data` array:
d += signbits;
data[n] = d;
The `signbits` variable will be non-zero in bipolar mode, and is used to
convert the hardware's 2's complement, 16-bit numbers to Comedi's
straight binary sample format (with 0 representing the most negative
voltage). This breaks because `d` is now 32 bits wide instead of 16
bits wide, so after the addition of `signbits`, `data[n]` ends up being
set to values above 65536 for negative voltages. This affects all
supported "E series" cards except PCI-6143 (and PXI-6143). Fix it by
ANDing the value written to the `data[n]` with the mask 0xffff.
Fixes: 0557344e21 ("staging: comedi: ni_mio_common: fix local var for 32-bit read")
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: <stable@vger.kernel.org>
----
Needs backporting to stable kernels 3.18 onwards.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For NI M Series cards, the Comedi `insn_read` handler for the AI
subdevice is broken due to ANDing the value read from the AI FIFO data
register with an incorrect mask. The incorrect mask clears all but the
most significant bit of the sample data. It should preserve all the
sample data bits. Correct it.
Fixes: 817144ae7f ("staging: comedi: ni_mio_common: remove unnecessary use of 'board->adbits'")
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After following a discussion about the used integer types Dan Carpenter
pointed out that 'int' types should be used over the current change to
's16'. The reason for this is to have an upper bound instead of overflowing
the 's16' so we could still remove devices.
Signed-off-by: Shiva Kerdel <shiva@exdev.nl>
Suggested-by: Stuart Yoder <stuart.yoder@nxp.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch is the main client part of a new feature that supports
multiple modify metadata RPCs in parallel. Its goal is to improve
metadata operations performance of a single client, while maintening
the consistency of MDT reply reconstruction and MDT recovery
mechanisms.
It allows to manage the number of modify RPCs in flight within
the client obd structure and to assign a virtual index (the tag) to
each modify RPC to help server side cleaning of reply data.
The mdc component uses this feature to send multiple modify RPCs
in parallel.
Signed-off-by: Gregoire Pichon <gregoire.pichon@bull.net>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5319
Reviewed-on: http://review.whamcloud.com/14374
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement non-blocking migration based on exclusive open instead of
group lock. Implemented exclusive close operation to atomically put
a lease, swap two layouts and close a file. This allows race-free
migrations.
Make the caller responsible for retrying on failure (EBUSY, EAGAIN)
in non-blocking mode.
In blocking mode, allow applications to trigger layout swaps using a
grouplock they already own, to prevent race conditions between the
actual data copy and the layout swap. Updated lfs accordingly. File
leases are also taken in blocking mode, so that lfs migrate can issue
a warning if an application attempts to open a file that is being
migrated and gets blocked.
Timestamps (atime/mtime) are set from userland, after the layout swap
is performed, to prevent conflicts with the grouplock.
lli_trunc_sem is taken/released in the vvp_io layer, under the DLM
lock. This re-ordering fixes the original issue between truncate and
migrate.
Signed-off-by: Henri Doreau <henri.doreau@cea.fr>
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4840
Reviewed-on: http://review.whamcloud.com/10013
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: frank zago <fzago@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ptlrpc is using rq_xid as matchbits of bulk data, which means it
has to change rq_xid for bulk resend to avoid several bulk data
landing into the same buffer from different resends.
This patch uses one of reserved __u64 of ptlrpc_body to transfer
mbits to peer, matchbits is now separated from xid. With this change,
ptlrpc can keep rq_xid unchanged on resend, it only updates matchbits
for bulk data.
This protocol change is only applied if both sides of connection have
OBD_CONNECT_BULK_MBITS, otherwise, ptlrpc still uses old approach and
update xid while resending bulk.
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3534
Reviewed-on: http://review.whamcloud.com/15421
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If you create a file, archive and release it, it keeps only a
link and all information in xattr. If you tar the file
with --xattr you will store the same striping information and link
information in the tar. If you delete the file, the file and archive
state does not make sense. Now if you restore the file using tar
with xattr having the RELEASED flag turned on, then it is not correct
because this is a new file. Hence ignoring the HSM xattr and masking
out the "RELEASED" flag for the files, which are not archived.
Signed-off-by: Aditya Pandit <panditadityashreesh@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6214
Reviewed-on: http://review.whamcloud.com/16060
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: frank zago <fzago@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Do not lookup master inode by ilookup5, instead it should
use ilookup5_nowait, otherwise it will cause dead lock,
1. Client1 send chmod req to the MDT0, then on MDT0, it
enqueues master and all of its slaves lock, (mdt_attr_set()
->mdt_lock_slaves()), after gets master and stripe0 lock,
it will send the enqueue request(for stripe1) to MDT1, then
MDT1 finds the lock has been granted to client2. Then MDT1
sends blocking ast to client2.
2. At the same time, client2 tries to unlink the striped
dir (rm -rf striped_dir), and during lookup, it will hold
the master inode of the striped directory, whose inode state
is NEW, then tries to revalidate all of its slaves,
(ll_prep_inode()->ll_iget()->ll_read_inode2()->
ll_update_inode().). And it will be blocked on the server
side because of 1.
3. Then the client get the blocking_ast request, cancel the
lock, but being blocked by ilookup5 in ll_md_blocking_ast(),
because the inode state is still NEW.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5344
Reviewed-on: http://review.whamcloud.com/16066
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some cases with a very long pathname, such as with sanity.sh
test_154c, mdc_ioc_fid2path() would spew long debug messages to
the log, because libcfs_debug_vmsg2() refuses to log messages over
one page in size.
Truncate the debug message to only log the last 512 characters
of the pathname, which is sufficient for most debugging, saves a
bit of space in the debug log, and will prevent the debug logging
from printing to the console in the first place.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1095
Reviewed-on: http://review.whamcloud.com/17078
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After range lock is introduced to Lustre, it's possible for
multiple threads to submit osc_extents with partial pages, and
finally I/O engine may try to merge these extents, which will
end up with assert in osc_build_rpc().
In this patch, osc_extent::oe_no_merge is introduced, and this flag
is set if osc_extent submitted via osc_io_submit() includes partial
pages. This flag is used by I/O engine to stop merging this kind
of extents.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6666
Reviewed-on: http://review.whamcloud.com/15468
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Patrick Farrell <paf@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons reports:
> The ldlm_pool field pl_recalc_time is set to the current
> monotonic clock value but the interval period is calculated
> with the wall clock. This means the interval period will
> always be far larger than the pl_recalc_period, which is
> just a small interval time period. The correct thing to
> do is to use monotomic clock current value instead of the
> wall clocks value when calculating recalc_interval_sec.
This broke when I converted the 32-bit get_seconds() into
ktime_get_{real_,}seconds() inconsistently. Either
one of those two would have worked, but mixing them
does not.
Staying with the original intention of the patch, this
changes the ktime_get_seconds() calls into ktime_get_real_seconds(),
using real time instead of mononic time.
Cc: stable@vger.kernel.org # v4.4+
Fixes: 8f83409cf2 ("staging/lustre: use 64-bit time for pl_recalc")
Reported-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We accidentally removed a tab here. Let's add it back, and some curly
braces as well since this is a muti-line indent.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When lu_object_alloc() reaches to LOV object init, we need initialize
its stripe type beforehand, so that if something wrong in the conf
buffer, the object chain need to be traversed to free what has been
allocated, with LOV object type be set as LLT_EMPTY, and when the LOV
part is reached, it won't panic without knowing what stripe type it
is.
This patch also improves debug messages in lsm_unpackmd_common(), and
does not return error if the LOV device is still processing config
log while trying to verify a layout buffer.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6744
Reviewed-on: http://review.whamcloud.com/15362
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace all occurences of (1<<x) by BIT(x) in the file
ks7010_sdio.h to get rid of checkpatch.pl "CHECK" output "Prefer
using BIT macro".
Signed-off-by: Punit Vara <punitvara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
