After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/phy/ to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
While touching these files, make indention of the struct initializer
consistent in several files.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241009065307.504930-2-u.kleine-koenig@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently, if the clock values cannot be set to the exact rate,
the round_rate and set_rate functions use the closest value found in
the look-up-table. In preparation of removing values from the LUT
that can be calculated evenly with the integer calculator, it's
necessary to ensure to check both the look-up-table and the integer
divider clock values to get the closest values to the requested
value. It does this by measuring the difference between the
requested clock value and the closest value in both integer divider
calucator and the fractional clock look-up-table.
Which ever has the smallest difference between them is returned as
the closest rate.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Tested-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20240914112816.520224-5-aford173@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is currently a look-up table for a variety of resolutions.
Since the phy has the ability to dynamically calculate the values
necessary to use the intger divider which should allow more
resolutions without having to update the look-up-table.
If the lookup table cannot find an exact match, fall back to the
dynamic calculator of the integer divider.
Previously, the value of P was hard-coded to 1, this required an
update to the phy_pll_cfg table to add in the extra value into the
table, so if the value of P is calculated to be something else
by the PMS calculator, the calculated_phy_pll_cfg structure
can be used instead without having to keep track of which method
was used.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Tested-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20240914112816.520224-4-aford173@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently driver supports only x4 lane based functionality using tx/rx and
tx2/rx2 pair of register sets. To support 8 lane functionality with PCIe3,
PCIe3 related QMP PHY provides additional programming which are available
as txz and rxz based register set. Hence add txz and rxz based registers
usage and programming sequences.
As soon as software programs the txz and rxz based register set, hardware
shall "broadcast" the same settings to the tx/rx pair of registers for all
the 8 lanes, which saves the effort of software programming them one by
one.
There might be some tx and/or rx registers on some lanes need minor tweaks,
program them after programming the txz and rxz reigster set.
In addition, x1e80100 uses QMP PHY ver 6.30 for PCIe Gen4 x8, hence add
two new header files to reflect the new register offsets.
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20241017030412.265000-5-quic_qianyu@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Addition of the COMBOPHY driver found on STM32MP25 platforms
This single lane PHY is shared (exclusive) between the USB3 and PCIE
controllers.
Supports 5Gbit/s for PCIE gen2 or 2.5Gbit/s for PCIE gen1.
Supports wakeup-source capability to wakeup system using remote-wakeup
capable USB device
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Link: https://lore.kernel.org/r/20240930170847.948779-3-christian.bruel@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the bindings for STM32 COMBOPHY interface, used to support
the PCIe and USB3 stm32mp25 drivers.
Following entries can be used to tune caracterisation parameters
- st,output-micro-ohms and st,output-vswing-microvolt bindings entries
to tune the impedance and voltage swing using discrete simulation results
- st,rx-equalizer register to set the internal rx equalizer filter value.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Link: https://lore.kernel.org/r/20240930170847.948779-2-christian.bruel@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
CP11x UTMI PHY supports swapping D+/D- signals via digital control
register 1.
Add support for the "swap-dx-lanes" device-tree property, which lists
the port-ids that should swap D+ and D-.
The property is evaluated in probe and applied before power-on
during mvebu_cp110_utmi_port_setup.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Link: https://lore.kernel.org/r/20241002-mvebu-utmi-phy-v4-1-83783dc89b9d@solid-run.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Broadcom USB PHY driver contains a lookup table
(`reg_bits_map_tables`) to resolve register bitmaps unique to certain
versions of the USB PHY as found in various Broadcom chip families.
Historically, this table was just kept carefully in sync with the
"selector" enum every time the latter changed to ensure consistency.
However, a recent commit [1] introduced two new enumerators but did not
adjust the array for BCM4908, thus breaking the xHCI controller (and
boot process) on this platform and revealing the fragility of this
approach.
Since these arrays are a little sparse (many elements are zero) and the
position of the array elements is significant only insofar as they agree
with the enumerators, designated initializers are a better fit than
positional initializers here. Convert this table accordingly.
[1] 4536fe9640 ("phy: usb: suppress OC condition for 7439b2")
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Justin Chen <justin.chen@broadcom.com>
Link: https://lore.kernel.org/r/20241004034131.1363813-3-CFSworks@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Broadcom USB PHY driver contains a lookup table
(`reg_bits_map_tables`) to resolve register bitmaps unique to certain
versions of the USB PHY as found in various Broadcom chip families. A
recent commit (see 'fixes' tag) introduced two new elements to each chip
family in this table -- except for one: BCM4908. This resulted in the
xHCI controller not being initialized correctly, causing a panic on
boot.
The next patch will update this table to use designated initializers in
order to prevent this from happening again. For now, just add back the
missing array elements to resolve the regression.
Fixes: 4536fe9640 ("phy: usb: suppress OC condition for 7439b2")
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Reviewed-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20241004034131.1363813-2-CFSworks@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The cpu_emergency_register_virt_callback() function is used
unconditionally by the x86 kvm code, but it is declared (and defined)
conditionally:
#if IS_ENABLED(CONFIG_KVM_INTEL) || IS_ENABLED(CONFIG_KVM_AMD)
void cpu_emergency_register_virt_callback(cpu_emergency_virt_cb *callback);
...
leading to a build error when neither KVM_INTEL nor KVM_AMD support is
enabled:
arch/x86/kvm/x86.c: In function ‘kvm_arch_enable_virtualization’:
arch/x86/kvm/x86.c:12517:9: error: implicit declaration of function ‘cpu_emergency_register_virt_callback’ [-Wimplicit-function-declaration]
12517 | cpu_emergency_register_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/kvm/x86.c: In function ‘kvm_arch_disable_virtualization’:
arch/x86/kvm/x86.c:12522:9: error: implicit declaration of function ‘cpu_emergency_unregister_virt_callback’ [-Wimplicit-function-declaration]
12522 | cpu_emergency_unregister_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the build by defining empty helper functions the same way the old
cpu_emergency_disable_virtualization() function was dealt with for the
same situation.
Maybe we could instead have made the call sites conditional, since the
callers (kvm_arch_{en,dis}able_virtualization()) have an empty weak
fallback. I'll leave that to the kvm people to argue about, this at
least gets the build going for that particular config.
Fixes: 590b09b1d8 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull mailbox updates from Jassi Brar:
- fix kconfig dependencies (mhu-v3, omap2+)
- use devie name instead of genereic imx_mu_chan as interrupt name
(imx)
- enable sa8255p and qcs8300 ipc controllers (qcom)
- Fix timeout during suspend mode (bcm2835)
- convert to use use of_property_match_string (mailbox)
- enable mt8188 (mediatek)
- use devm_clk_get_enabled helpers (spreadtrum)
- fix device-id typo (rockchip)
* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox, remoteproc: omap2+: fix compile testing
dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
mailbox: Use of_property_match_string() instead of open-coding
mailbox: bcm2835: Fix timeout during suspend mode
mailbox: sprd: Use devm_clk_get_enabled() helpers
mailbox: rockchip: fix a typo in module autoloading
mailbox: imx: use device name in interrupt name
mailbox: ARM_MHU_V3 should depend on ARM64
Pull i2c fixes from Wolfram Sang:
- fix DesignWare driver ENABLE-ABORT sequence, ensuring ABORT can
always be sent when needed
- check for PCLK in the SynQuacer controller as an optional clock,
allowing ACPI to directly provide the clock rate
- KEBA driver Kconfig dependency fix
- fix XIIC driver power suspend sequence
* tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled
i2c: keba: I2C_KEBA should depend on KEBA_CP500
i2c: synquacer: Deal with optional PCLK correctly
i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
Pull dma-mapping fix from Christoph Hellwig:
- handle chained SGLs in the new tracing code (Christoph Hellwig)
* tag 'dma-mapping-6.12-2024-09-29' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: fix DMA API tracing for chained scatterlists
Pull more SCSI updates from James Bottomley:
"These are mostly minor updates.
There are two drivers (lpfc and mpi3mr) which missed the initial
pull and a core change to retry a start/stop unit which affect
suspend/resume"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: lpfc: Update lpfc version to 14.4.0.5
scsi: lpfc: Support loopback tests with VMID enabled
scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING
scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
scsi: lpfc: Fix kref imbalance on fabric ndlps from dev_loss_tmo handler
scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs
scsi: lpfc: Update phba link state conditional before sending CMF_SYNC_WQE
scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd()
scsi: mpi3mr: Update driver version to 8.12.0.0.50
scsi: mpi3mr: Improve wait logic while controller transitions to READY state
scsi: mpi3mr: Update MPI Headers to revision 34
scsi: mpi3mr: Use firmware-provided timestamp update interval
scsi: mpi3mr: Enhance the Enable Controller retry logic
scsi: sd: Fix off-by-one error in sd_read_block_characteristics()
scsi: pm8001: Do not overwrite PCI queue mapping
scsi: scsi_debug: Remove a useless memset()
scsi: pmcraid: Convert comma to semicolon
scsi: sd: Retry START STOP UNIT commands
scsi: mpi3mr: A performance fix
scsi: ufs: qcom: Update MODE_MAX cfg_bw value
...
