When dmaengine supports pause function, in suspend state,
dmaengine_pause() is called instead of dmaengine_terminate_async(),
In end of playback stream, the runtime->state will go to
SNDRV_PCM_STATE_DRAINING, if system suspend & resume happen
at this time, application will not resume playback stream, the
stream will be closed directly, the dmaengine_terminate_async()
will not be called before the dmaengine_synchronize(), which
violates the call sequence for dmaengine_synchronize().
This behavior also happens for capture streams, but there is no
SNDRV_PCM_STATE_DRAINING state for capture. So use
dmaengine_tx_status() to check the DMA status if the status is
DMA_PAUSED, then call dmaengine_terminate_async() to terminate
dmaengine before dmaengine_synchronize().
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1718851218-27803-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ACPI IDs used in the CS35L56 HDA drivers are all handled by the
serial multi-instantiate driver which starts multiple Linux device
instances from a single ACPI Device() node.
As serial multi-instantiate is not an optional part of the system add it
as a dependency in Kconfig so that it is not overlooked.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://lore.kernel.org/20240619161602.117452-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It is possible that during system boot when there multiple devices
attempting simultaneous initialization on a slow control bus the
download of firmware and tuning data may take a user perceivable amount
of time (a slow I2C bus with 4 amps this work could take over 2
seconds).
Adopt a pattern used in the ASoC driver and perform this activity in a
background thread so that interactive performance is not impaired. The
system_long_wq is a parallel workqueue and driver instances will perform
their firmware downloads in parallel to make best use of available bus
bandwidth.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://lore.kernel.org/20240618130011.62860-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are lots of code checking NULL for kcontrol passed to
snd_ctl_remove() in the caller side. Let's make snd_ctl_remove()
accepting the NULL kcontrol instead a la free(), so that we can clean
up the caller side.
Link: https://lore.kernel.org/20240617100529.6667-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a simple sanity check to HD-audio HDMI Channel Map controls.
Although the value might not be accepted for the actual connection, we
can filter out some bogus values beforehand, and that should be enough
for making kselftest happier.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/20240616073454.16512-7-tiwai@suse.de
The values returned from Playback Channel Map and Capture Channel Map
controls may vary dynamically depending on the corresponding PCM
stream. Mark those as volatile to indicate the values are unstable
and not suitable for testing.
Note that we may change the driver to return -EINVAL, but this would
bring other side effects, such as "alsactl restore" would start
receiving unexpected errors. So we still keep returning 0 for those
invalid inputs.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/r/1d44be36-9bb9-4d82-8953-5ae2a4f09405@molgen.mpg.de
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/20240616073454.16512-6-tiwai@suse.de
Although we have already a mechanism for sanity checks of input values
for control writes, it's not applied unless the kconfig
CONFIG_SND_CTL_INPUT_VALIDATION is set due to the performance reason.
Nevertheless, it still makes sense to apply the same check for user
elements despite of its cost, as that's the only way to filter out the
invalid values; the user controls are handled solely in ALSA core
code, and there is no corresponding driver, after all.
This patch adds the same input value validation for user control
elements at its put callback. The kselftest will be happier with this
change, as the incorrect values will be bailed out now with errors.
For other normal controls, the check is applied still only when
CONFIG_SND_CTL_INPUT_VALIDATION is set.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/r/1d44be36-9bb9-4d82-8953-5ae2a4f09405@molgen.mpg.de
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/20240616073454.16512-4-tiwai@suse.de
In preparation for moving duplicated members from the hda_component
structure introduce a parent structure that wraps the array of
components. This also allows us to confine the knowledge of the maximum
number of entries to the hda_component files and eliminate passing that
redundant information around and making direct accesses to the array.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/20240617154105.108635-2-simont@opensource.cirrus.com
The cs35l41_hda_unbind() function clears the hda_component entry
matching it's index and then dereferences the codec pointer held in the
first element of the hda_component array, this is an issue when the
device index was 0.
Instead use the codec pointer stashed in the cs35l41_hda structure as it
will still be valid.
Fixes: 7cf5ce66df ("ALSA: hda: cs35l41: Add device_link between HDA and cs35l41_hda")
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240531120820.35367-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At converting between the legacy event and UMP, the parameters for
MIDI Song Position Pointer are incorrectly stored. It should have
been LSB -> MSB order while it stored in MSB -> LSB order.
This patch corrects the ordering.
Fixes: e9e02819a9 ("ALSA: seq: Automatic conversion of UMP events")
Link: https://lore.kernel.org/r/20240531075110.3250-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASoC: Fixes for v6.10
Several serieses of fixes that have come in since the merge window,
mostly for Intel systems. The biggest thing is some updates from Peter
which fix support for a series of Intel laptops which have been found to
use 16 bit rather than 32 bit DMIC configuration blobs in their firmware
descriptions. We also have a bunch of fixes for module annotations, and
some smaller single patch fixes.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The existing logic to pick a DMIC blob is based on several historical
assumptions that the NHLT in BIOS always contains 32-bits per sample
type (first patch, [1]).
The other issue with the existing logic is that it was designed to care only
about the bit depth of the format and fails to find the existing and correct
blob when rate/channels are different on the FE side compared to what we should
be using on the DAI side (we have components in path which can change
rate/channel count).
These issues have not been observed in past but with new MTL based (Windows)
laptops and new topologies to enhance the audio quality, we started to see weird
issues around how our assumptions of vendors failed.
Since some NHLT blob handling cleanup has been done for 6.10, this series will
complete that work to cover even cases that we don't anticipate to see.
[1] https://github.com/thesofproject/linux/issues/4973
