Xe2_LPD doesn't have south display engine on a PCH, it's actually
on the SoC die (while north display engine is on compute die). As
such it makes no sense to go through the PCI devices looking for
an ISA bridge. The approach used by BXT/GLK can't be used here since
leaving it with PCH_NONE would mean taking the wrong code paths.
For the places we currently use a PCH check, it's enough for now to just
check the north display version. Use that to define a fake PCH to be
used across the driver. Eventually these PCH checks may need to be
re-designed as this is already the third platform using/needing a
fake PCH.
v2: Match on display IP version rather than on platform (Matt Roper)
v3: Extend and clarify commit message (Matt Roper / Ville)
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-6-lucas.demarchi@intel.com
This reverts commit 959fb1a686.
Looks like the core MST code might not call i2c_adapter() for us
in time, and thus creating the ddc symlink will fail. This will
in fact fail the entire connector registration, but the MST code
doesn't really seem to care about that and blindly plows ahead.
All we may get in the logs is a nearly back to back
register+unregister debug messages:
[drm:drm_dp_mst_connector_late_register [drm_display_helper]] registering DPMST remote bus for card0-DP-7
[drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 42 00 00 02
[drm:drm_dp_mst_connector_early_unregister [drm_display_helper]] unregistering DPMST remote bus for card0-DP-7
Untangling the initialization order may take some real work,
so let's just revert the ddc symlink addition for now...
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9357
Fixes: 959fb1a686 ("drm/i915/mst: Populate connector->ddc")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919095659.10742-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Karthik B S <karthik.b.s@intel.com>
Implement low refresh rate (LRR) where we change the vblank
length by hand as requested, but otherwise keep the timing
generator running in non-VRR mode (ie. fixed refresh rate).
The panel itself must support VRR for this to work, and
only TGL+ has the double buffred TRANS_VTOTAL.VTOTAL that
we need to make the switch properly. The double buffer
latching happens at the start of transcoders undelayed
vblank. The other thing that we change is
TRANS_VBLANK.VBLANK_END but the hardware entirely ignores
that in DP mode. But I decided to keep writing it anyway
just to avoid more special cases in readout/state check.
v2: Document that TRANS_VBLANK.VBLANK_END is ignored by
the hardware
v3: Reconcile with VRR fastset
Adjust update_lrr flag behaviour
Make sure timings stay within VRR range
v4: Fix up update_m_n vs. update_lrr rebase fail (Manasi)
Drop DOUBLE_BUFFER_VACTIVE define as it's not needed (Manasi)
TODO: Hook LRR into the automatic DRRS downclocking stuff?
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230915103800.14218-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Make the seamless_m_n flag more like the update_pipe fastset
flag, ie. the flag will only be set if we need to do the seamless
M/N update, and in all other cases the flag is cleared. Also
rename the flag to update_m_n to make it more clear it's similar
to update_pipe.
I believe special casing seamless_m_n like this makes sense
as it also affects eg. vblank evasion. We can potentially avoid
some vblank evasion tricks, simplify some checks, and hopefully
will help with the VRR vs. M/N mess.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-6-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
In order to reconcile seamless M/N updates with VRR we'll
need to defer the fastset VRR enable to happen after the
seamless M/N update (which happens during the vblank evade
critical section). So just push the VRR enable to be the last
thing during the update.
This will also affect the vblank evasion as the transcoder
will now still be running with the old VRR state during
the vblank evasion. So just grab the timings always from the
old crtc state during any non-modeset commit, and also grab
the current state of VRR from the active timings (as we disable
VRR before vblank evasion during fastsets).
This also fixes vblank evasion for seamless M/N updates as
we now properly account for the fact that the M/N update
happens after vblank evasion.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-5-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
There was a recent update in the BSpec adding an extra step to the PLL
enable sequence, which is for programming the msgbus timer. Since we
also touch PHY registers during hw readout, let's do the programming
when starting a transaction rather than only when doing the PLL enable
sequence.
This might be the missing step that was causing the timeouts
that we have recently seen during C20 SRAM register programming
sequences. With this in place, we shouldn't need the logic to bump the
timer thresholds, since now we have a documented value that should be
set peform programming the registers. As such, let's also remove
intel_cx0_bus_check_and_bump_timer(), but keep the part that checks if
hardware really detected a timeout, which might be useful debugging
information.
v2:
- Use debug level instead of warning for the message notifying that
the hardware did not detect the timeout. (Mika)
- Got a new BSpec update clarifying that we need to program the msgbus
timer of both PHY lanes. Update the changes to reflect that.
(Gustavo)
BSpec: 64568
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230912155923.39494-1-gustavo.sousa@intel.com
Populate connector->ddc, and thus create the "ddc" symlink
in sysfs for analog VGA connectors.
As a bonus we can replace a bunch of intel_gmbus_get_adapter()
lookups with just the connector->ddc pointer. Sadly one extra
lookup still remains due to the g4x DVI-I shenanigans. We could
perhaps consider borrowing the ddc proxy idea from SDVO to deal
with that in a perhaps nicer way, but can't really be bothered
right now at least. Also not sure exposing such a dual ddc bus
to userspace would be quite wise.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently drm_sysfs_connector_add() attempts to register
the "ddc" symlink (based one connector->ddc) before the
driver's .early_register() hook has been called. That is
too early for i915 which only fully registers the aux ch
and associated i2c bus from said hook (to prevent half
initialized stuff getting exposed to userspace). This
causes my attempt at using drm_connector_init_with_ddc()
to fail, and the entire connector disappears from sysfs
on account of sysfs_create_link() failing.
To fix that split the sysfs symlink stuff into separate
functions (drm_sysfs_connector_add_late() and
drm_sysfs_connector_remove_early()) which are called
on the opposite side of the .later_register() and
.early_unregister() hooks.
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de> #irc
