Users reported a scenario where MPTCP connections that were configured
with SO_KEEPALIVE prior to connect would fail to enable their keepalives
if MTPCP fell back to TCP mode.
After investigating, this affects keepalives for any connection where
sync_socket_options is called on a socket that is in the closed or
listening state. Joins are handled properly. For connects,
sync_socket_options is called when the socket is still in the closed
state. The tcp_set_keepalive() function does not act on sockets that
are closed or listening, hence keepalive is not immediately enabled.
Since the SO_KEEPOPEN flag is absent, it is not enabled later in the
connect sequence via tcp_finish_connect. Setting the keepalive via
sockopt after connect does work, but would not address any subsequently
created flows.
Fortunately, the fix here is straight-forward: set SOCK_KEEPOPEN on the
subflow when calling sync_socket_options.
The fix was valdidated both by using tcpdump to observe keepalive
packets not being sent before the fix, and being sent after the fix. It
was also possible to observe via ss that the keepalive timer was not
enabled on these sockets before the fix, but was enabled afterwards.
Fixes: 1b3e7ede13 ("mptcp: setsockopt: handle SO_KEEPALIVE and SO_PRIORITY")
Cc: stable@vger.kernel.org
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/aL8dYfPZrwedCIh9@templeofstupid.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Syzkaller managed to lock the lower device via ETHTOOL_SFEATURES:
netdev_lock include/linux/netdevice.h:2761 [inline]
netdev_lock_ops include/net/netdev_lock.h:42 [inline]
netdev_sync_lower_features net/core/dev.c:10649 [inline]
__netdev_update_features+0xcb1/0x1be0 net/core/dev.c:10819
netdev_update_features+0x6d/0xe0 net/core/dev.c:10876
macsec_notify+0x2f5/0x660 drivers/net/macsec.c:4533
notifier_call_chain+0x1b3/0x3e0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2267 [inline]
call_netdevice_notifiers net/core/dev.c:2281 [inline]
netdev_features_change+0x85/0xc0 net/core/dev.c:1570
__dev_ethtool net/ethtool/ioctl.c:3469 [inline]
dev_ethtool+0x1536/0x19b0 net/ethtool/ioctl.c:3502
dev_ioctl+0x392/0x1150 net/core/dev_ioctl.c:759
It happens because lower features are out of sync with the upper:
__dev_ethtool (real_dev)
netdev_lock_ops(real_dev)
ETHTOOL_SFEATURES
__netdev_features_change
netdev_sync_upper_features
disable LRO on the lower
if (old_features != dev->features)
netdev_features_change
fires NETDEV_FEAT_CHANGE
macsec_notify
NETDEV_FEAT_CHANGE
netdev_update_features (for each macsec dev)
netdev_sync_lower_features
if (upper_features != lower_features)
netdev_lock_ops(lower) # lower == real_dev
stuck
...
netdev_unlock_ops(real_dev)
Per commit af5f54b0ef ("net: Lock lower level devices when updating
features"), we elide the lock/unlock when the upper and lower features
are synced. Makes sure the lower (real_dev) has proper features after
the macsec link has been created. This makes sure we never hit the
situation where we need to sync upper flags to the lower.
Reported-by: syzbot+7e0f89fb6cae5d002de0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7e0f89fb6cae5d002de0
Fixes: 7e4d784f58 ("net: hold netdev instance lock during rtnetlink operations")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250908173614.3358264-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ndo hwtstamp callbacks are expected to run under the per-device ops
lock. Make the lower get/set paths consistent with the rest of ndo
invocations.
Kernel log:
WARNING: CPU: 13 PID: 51364 at ./include/net/netdev_lock.h:70 __netdev_update_features+0x4bd/0xe60
...
RIP: 0010:__netdev_update_features+0x4bd/0xe60
...
Call Trace:
<TASK>
netdev_update_features+0x1f/0x60
mlx5_hwtstamp_set+0x181/0x290 [mlx5_core]
mlx5e_hwtstamp_set+0x19/0x30 [mlx5_core]
dev_set_hwtstamp_phylib+0x9f/0x220
dev_set_hwtstamp_phylib+0x9f/0x220
dev_set_hwtstamp+0x13d/0x240
dev_ioctl+0x12f/0x4b0
sock_ioctl+0x171/0x370
__x64_sys_ioctl+0x3f7/0x900
? __sys_setsockopt+0x69/0xb0
do_syscall_64+0x6f/0x2e0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
...
</TASK>
....
---[ end trace 0000000000000000 ]---
Note that the mlx5_hwtstamp_set and mlx5e_hwtstamp_set functions shown
in the trace come from an in progress patch converting the legacy ioctl
to ndo_hwtstamp_get/set and are not present in mainline.
Fixes: ffb7ed19ac ("net: hold netdev instance lock during ioctl operations")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://patch.msgid.link/20250907080821.2353388-1-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The blamed commit changed the conditions which phylib uses to stop
and start the state machine in the suspend and resume paths, and
while improving it, has caused two issues.
The original code used this test:
phydev->attached_dev && phydev->adjust_link
and if true, the paths would handle the PHY state machine. This test
evaluates true for normal drivers that are using phylib directly
while the PHY is attached to the network device, but false in all
other cases, which include the following cases:
- when the PHY has never been attached to a network device.
- when the PHY has been detached from a network device (as phy_detach()
sets phydev->attached_dev to NULL, phy_disconnect() calls
phy_detach() and additionally sets phydev->adjust_link NULL.)
- when phylink is using the driver (as phydev->adjust_link is NULL.)
Only the third case was incorrect, and the blamed commit attempted to
fix this by changing this test to (simplified for brevity, see
phy_uses_state_machine()):
phydev->phy_link_change == phy_link_change ?
phydev->attached_dev && phydev->adjust_link : true
However, this also incorrectly evaluates true in the first two cases.
Fix the first case by ensuring that phy_uses_state_machine() returns
false when phydev->phy_link_change is NULL.
Fix the second case by ensuring that phydev->phy_link_change is set to
NULL when phy_detach() is called.
Reported-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20250806082931.3289134-1-xu.yang_2@nxp.com
Fixes: fc75ea20ff ("net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/E1uvMEz-00000003Aoe-3qWe@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a GSO skb is sent through a Geneve tunnel and if Geneve options are
added, the split GSO skb might not fit in the MTU anymore and an ICMP
frag needed packet can be generated. In such case the ICMP packet might
go through the segmentation logic (and dropped) later if it reaches a
path were the GSO status is checked and segmentation is required.
This is especially true when an OvS bridge is used with a Geneve tunnel
attached to it. The following set of actions could lead to the ICMP
packet being wrongfully segmented:
1. An skb is constructed by the TCP layer (e.g. gso_type SKB_GSO_TCPV4,
segs >= 2).
2. The skb hits the OvS bridge where Geneve options are added by an OvS
action before being sent through the tunnel.
3. When the skb is xmited in the tunnel, the split skb does not fit
anymore in the MTU and iptunnel_pmtud_build_icmp is called to
generate an ICMP fragmentation needed packet. This is done by reusing
the original (GSO!) skb. The GSO metadata is not cleared.
4. The ICMP packet being sent back hits the OvS bridge again and because
skb_is_gso returns true, it goes through queue_gso_packets...
5. ...where __skb_gso_segment is called. The skb is then dropped.
6. Note that in the above example on re-transmission the skb won't be a
GSO one as it would be segmented (len > MSS) and the ICMP packet
should go through.
Fix this by resetting the GSO information before reusing an skb in
iptunnel_pmtud_build_icmp and iptunnel_pmtud_build_icmpv6.
Fixes: 4cb47a8644 ("tunnels: PMTU discovery support for directly bridged IP packets")
Reported-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://patch.msgid.link/20250904125351.159740-1-atenart@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For some reason Broadcom decided that BCM53101 uses 0.5s increments for
the ageing time register, but kept the field width the same [1]. Due to
this, the actual ageing time was always half of what was configured.
Fix this by adapting the limits and value calculation for BCM53101.
So far it looks like this is the only chip with the increased tick
speed:
$ grep -l -r "Specifies the aging time in 0.5 seconds" cdk/PKG/chip | sort
cdk/PKG/chip/bcm53101/bcm53101_a0_defs.h
$ grep -l -r "Specifies the aging time in seconds" cdk/PKG/chip | sort
cdk/PKG/chip/bcm53010/bcm53010_a0_defs.h
cdk/PKG/chip/bcm53020/bcm53020_a0_defs.h
cdk/PKG/chip/bcm53084/bcm53084_a0_defs.h
cdk/PKG/chip/bcm53115/bcm53115_a0_defs.h
cdk/PKG/chip/bcm53118/bcm53118_a0_defs.h
cdk/PKG/chip/bcm53125/bcm53125_a0_defs.h
cdk/PKG/chip/bcm53128/bcm53128_a0_defs.h
cdk/PKG/chip/bcm53134/bcm53134_a0_defs.h
cdk/PKG/chip/bcm53242/bcm53242_a0_defs.h
cdk/PKG/chip/bcm53262/bcm53262_a0_defs.h
cdk/PKG/chip/bcm53280/bcm53280_a0_defs.h
cdk/PKG/chip/bcm53280/bcm53280_b0_defs.h
cdk/PKG/chip/bcm53600/bcm53600_a0_defs.h
cdk/PKG/chip/bcm89500/bcm89500_a0_defs.h
[1] a5d3fc9b12/cdk/PKG/chip/bcm53101/bcm53101_a0_defs.h (L28966)
Fixes: e39d14a760 ("net: dsa: b53: implement setting ageing time")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250905124507.59186-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Per family bind/unbind callbacks were introduced to allow families
to track multicast group consumer presence, e.g. to start or stop
producing events depending on listeners.
However, in genl_bind() the bind() callback was invoked even if
capability checks failed and ret was set to -EPERM. This means that
callbacks could run on behalf of unauthorized callers while the
syscall still returned failure to user space.
Fix this by only invoking bind() after "if (ret) break;" check
i.e. after permission checks have succeeded.
Fixes: 3de21a8990 ("genetlink: Add per family bind/unbind callbacks")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250905135731.3026965-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Problem description
===================
Lockdep reports a possible circular locking dependency (AB/BA) between
&pl->state_mutex and &phy->lock, as follows.
phylink_resolve() // acquires &pl->state_mutex
-> phylink_major_config()
-> phy_config_inband() // acquires &pl->phydev->lock
whereas all the other call sites where &pl->state_mutex and
&pl->phydev->lock have the locking scheme reversed. Everywhere else,
&pl->phydev->lock is acquired at the top level, and &pl->state_mutex at
the lower level. A clear example is phylink_bringup_phy().
The outlier is the newly introduced phy_config_inband() and the existing
lock order is the correct one. To understand why it cannot be the other
way around, it is sufficient to consider phylink_phy_change(), phylink's
callback from the PHY device's phy->phy_link_change() virtual method,
invoked by the PHY state machine.
phy_link_up() and phy_link_down(), the (indirect) callers of
phylink_phy_change(), are called with &phydev->lock acquired.
Then phylink_phy_change() acquires its own &pl->state_mutex, to
serialize changes made to its pl->phy_state and pl->link_config.
So all other instances of &pl->state_mutex and &phydev->lock must be
consistent with this order.
Problem impact
==============
I think the kernel runs a serious deadlock risk if an existing
phylink_resolve() thread, which results in a phy_config_inband() call,
is concurrent with a phy_link_up() or phy_link_down() call, which will
deadlock on &pl->state_mutex in phylink_phy_change(). Practically
speaking, the impact may be limited by the slow speed of the medium
auto-negotiation protocol, which makes it unlikely for the current state
to still be unresolved when a new one is detected, but I think the
problem is there. Nonetheless, the problem was discovered using lockdep.
Proposed solution
=================
Practically speaking, the phy_config_inband() requirement of having
phydev->lock acquired must transfer to the caller (phylink is the only
caller). There, it must bubble up until immediately before
&pl->state_mutex is acquired, for the cases where that takes place.
Solution details, considerations, notes
=======================================
This is the phy_config_inband() call graph:
sfp_upstream_ops :: connect_phy()
|
v
phylink_sfp_connect_phy()
|
v
phylink_sfp_config_phy()
|
| sfp_upstream_ops :: module_insert()
| |
| v
| phylink_sfp_module_insert()
| |
| | sfp_upstream_ops :: module_start()
| | |
| | v
| | phylink_sfp_module_start()
| | |
| v v
| phylink_sfp_config_optical()
phylink_start() | |
| phylink_resume() v v
| | phylink_sfp_set_config()
| | |
v v v
phylink_mac_initial_config()
| phylink_resolve()
| | phylink_ethtool_ksettings_set()
v v v
phylink_major_config()
|
v
phy_config_inband()
phylink_major_config() caller #1, phylink_mac_initial_config(), does not
acquire &pl->state_mutex nor do its callers. It must acquire
&pl->phydev->lock prior to calling phylink_major_config().
phylink_major_config() caller #2, phylink_resolve() acquires
&pl->state_mutex, thus also needs to acquire &pl->phydev->lock.
phylink_major_config() caller #3, phylink_ethtool_ksettings_set(), is
completely uninteresting, because it only calls phylink_major_config()
if pl->phydev is NULL (otherwise it calls phy_ethtool_ksettings_set()).
We need to change nothing there.
Other solutions
===============
The lock inversion between &pl->state_mutex and &pl->phydev->lock has
occurred at least once before, as seen in commit c718af2d00 ("net:
phylink: fix ethtool -A with attached PHYs"). The solution there was to
simply not call phy_set_asym_pause() under the &pl->state_mutex. That
cannot be extended to our case though, where the phy_config_inband()
call is much deeper inside the &pl->state_mutex section.
Fixes: 5fd0f1a02e ("net: phylink: add negotiation of in-band capabilities")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250904125238.193990-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently phylink_resolve() protects itself against concurrent
phylink_bringup_phy() or phylink_disconnect_phy() calls which modify
pl->phydev by relying on pl->state_mutex.
The problem is that in phylink_resolve(), pl->state_mutex is in a lock
inversion state with pl->phydev->lock. So pl->phydev->lock needs to be
acquired prior to pl->state_mutex. But that requires dereferencing
pl->phydev in the first place, and without pl->state_mutex, that is
racy.
Hence the reason for the extra lock. Currently it is redundant, but it
will serve a functional purpose once mutex_lock(&phy->lock) will be
moved outside of the mutex_lock(&pl->state_mutex) section.
Another alternative considered would have been to let phylink_resolve()
acquire the rtnl_mutex, which is also held when phylink_bringup_phy()
and phylink_disconnect_phy() are called. But since phylink_disconnect_phy()
runs under rtnl_lock(), it would deadlock with phylink_resolve() when
calling flush_work(&pl->resolve). Additionally, it would have been
undesirable because it would have unnecessarily blocked many other call
paths as well in the entire kernel, so the smaller-scoped lock was
preferred.
Link: https://lore.kernel.org/netdev/aLb6puGVzR29GpPx@shell.armlinux.org.uk/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250904125238.193990-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and Bluetooth.
We're reverting the removal of a Sundance driver, a user has appeared.
This makes the PR rather large in terms of LoC.
There's a conspicuous absence of real, user-reported 6.17 issues.
Slightly worried that the summer distracted people from testing.
Previous releases - regressions:
- ax25: properly unshare skbs in ax25_kiss_rcv()
Previous releases - always broken:
- phylink: disable autoneg for interfaces that have no inband, fix
regression on pcs-lynx (NXP LS1088)
- vxlan: fix null-deref when using nexthop objects
- batman-adv: fix OOB read/write in network-coding decode
- icmp: icmp_ndo_send: fix reversing address translation for replies
- tcp: fix socket ref leak in TCP-AO failure handling for IPv6
- mctp:
- mctp_fraq_queue should take ownership of passed skb
- usb: initialise mac header in RX path, avoid WARN
- wifi: mac80211: do not permit 40 MHz EHT operation on 5/6 GHz,
respect device limitations
- wifi: wilc1000: avoid buffer overflow in WID string configuration
- wifi: mt76:
- fix regressions from mt7996 MLO support rework
- fix offchannel handling issues on mt7996
- fix multiple wcid linked list corruption issues
- mt7921: don't disconnect when AP requests switch to a channel
which requires radar detection
- mt7925u: use connac3 tx aggr check in tx complete
- wifi: intel:
- improve validation of ACPI DSM data
- cfg: restore some 1000 series configs
- wifi: ath:
- ath11k: a fix for GTK rekeying
- ath12k: a missed WiFi7 capability (multi-link EMLSR)
- eth: intel:
- ice: fix races in "low latency" firmware interface for Tx timestamps
- idpf: set mac type when adding and removing MAC filters
- i40e: remove racy read access to some debugfs files
Misc:
- Revert "eth: remove the DLink/Sundance (ST201) driver"
- netfilter: conntrack: helper: Replace -EEXIST by -EBUSY, avoid
confusing modprobe"
* tag 'net-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
phy: mscc: Stop taking ts_lock for tx_queue and use its own lock
selftest: net: Fix weird setsockopt() in bind_bhash.c.
MAINTAINERS: add Sabrina to TLS maintainers
gve: update MAINTAINERS
ppp: fix memory leak in pad_compress_skb
net: xilinx: axienet: Add error handling for RX metadata pointer retrieval
net: atm: fix memory leak in atm_register_sysfs when device_register fail
netfilter: nf_tables: Introduce NFTA_DEVICE_PREFIX
selftests: netfilter: fix udpclash tool hang
ax25: properly unshare skbs in ax25_kiss_rcv()
mctp: return -ENOPROTOOPT for unknown getsockopt options
net/smc: Remove validation of reserved bits in CLC Decline message
ipv4: Fix NULL vs error pointer check in inet_blackhole_dev_init()
net: thunder_bgx: decrement cleanup index before use
net: thunder_bgx: add a missing of_node_put
net: phylink: move PHY interrupt request to non-fail path
net: lockless sock_i_ino()
tools: ynl-gen: fix nested array counting
wifi: wilc1000: avoid buffer overflow in WID string configuration
wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result()
...
Pull slab fixes from Vlastimil Babka:
- Stable fix to make slub_debug code not access invalid pointers in the
process of reporting issues (Li Qiong)
- Stable fix to make object tracking pass gfp flags to stackdepot to
avoid deadlock in contexts that can't even wake up kswapd due to e.g.
timers debugging enabled (yangshiguang)
* tag 'slab-for-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm: slub: avoid wake up kswapd in set_track_prepare
mm/slub: avoid accessing metadata when pointer is invalid in object_err()
When transmitting a PTP frame which is timestamp using 2 step, the
following warning appears if CONFIG_PROVE_LOCKING is enabled:
=============================
[ BUG: Invalid wait context ]
6.17.0-rc1-00326-ge6160462704e #427 Not tainted
-----------------------------
ptp4l/119 is trying to lock:
c2a44ed4 (&vsc8531->ts_lock){+.+.}-{3:3}, at: vsc85xx_txtstamp+0x50/0xac
other info that might help us debug this:
context-{4:4}
4 locks held by ptp4l/119:
#0: c145f068 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x58/0x1440
#1: c29df974 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x5c4/0x1440
#2: c2aaaad0 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x108/0x350
#3: c2aac170 (&lan966x->tx_lock){+.-.}-{2:2}, at: lan966x_port_xmit+0xd0/0x350
stack backtrace:
CPU: 0 UID: 0 PID: 119 Comm: ptp4l Not tainted 6.17.0-rc1-00326-ge6160462704e #427 NONE
Hardware name: Generic DT based system
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x7c/0xac
dump_stack_lvl from __lock_acquire+0x8e8/0x29dc
__lock_acquire from lock_acquire+0x108/0x38c
lock_acquire from __mutex_lock+0xb0/0xe78
__mutex_lock from mutex_lock_nested+0x1c/0x24
mutex_lock_nested from vsc85xx_txtstamp+0x50/0xac
vsc85xx_txtstamp from lan966x_fdma_xmit+0xd8/0x3a8
lan966x_fdma_xmit from lan966x_port_xmit+0x1bc/0x350
lan966x_port_xmit from dev_hard_start_xmit+0xc8/0x2c0
dev_hard_start_xmit from sch_direct_xmit+0x8c/0x350
sch_direct_xmit from __dev_queue_xmit+0x680/0x1440
__dev_queue_xmit from packet_sendmsg+0xfa4/0x1568
packet_sendmsg from __sys_sendto+0x110/0x19c
__sys_sendto from sys_send+0x18/0x20
sys_send from ret_fast_syscall+0x0/0x1c
Exception stack(0xf0b05fa8 to 0xf0b05ff0)
5fa0: 00000001 0000000e 0000000e 0004b47a 0000003a 00000000
5fc0: 00000001 0000000e 00000000 00000121 0004af58 00044874 00000000 00000000
5fe0: 00000001 bee9d420 00025a10 b6e75c7c
So, instead of using the ts_lock for tx_queue, use the spinlock that
skb_buff_head has.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Fixes: 7d272e63e0 ("net: phy: mscc: timestamping and PHC support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20250902121259.3257536-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bind_bhash.c passes (SO_REUSEADDR | SO_REUSEPORT) to setsockopt().
In the asm-generic definition, the value happens to match with the
bare SO_REUSEPORT, (2 | 15) == 15, but not on some arch.
arch/alpha/include/uapi/asm/socket.h:18:#define SO_REUSEADDR 0x0004
arch/alpha/include/uapi/asm/socket.h:24:#define SO_REUSEPORT 0x0200
arch/mips/include/uapi/asm/socket.h:24:#define SO_REUSEADDR 0x0004 /* Allow reuse of local addresses. */
arch/mips/include/uapi/asm/socket.h:33:#define SO_REUSEPORT 0x0200 /* Allow local address and port reuse. */
arch/parisc/include/uapi/asm/socket.h:12:#define SO_REUSEADDR 0x0004
arch/parisc/include/uapi/asm/socket.h:18:#define SO_REUSEPORT 0x0200
arch/sparc/include/uapi/asm/socket.h:13:#define SO_REUSEADDR 0x0004
arch/sparc/include/uapi/asm/socket.h:20:#define SO_REUSEPORT 0x0200
include/uapi/asm-generic/socket.h:12:#define SO_REUSEADDR 2
include/uapi/asm-generic/socket.h:27:#define SO_REUSEPORT 15
Let's pass SO_REUSEPORT only.
Fixes: c35ecb95c4 ("selftests/net: Add test for timing a bind request to a port with a populated bhash entry")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250903222938.2601522-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If alloc_skb() fails in pad_compress_skb(), it returns NULL without
releasing the old skb. The caller does:
skb = pad_compress_skb(ppp, skb);
if (!skb)
goto drop;
drop:
kfree_skb(skb);
When pad_compress_skb() returns NULL, the reference to the old skb is
lost and kfree_skb(skb) ends up doing nothing, leading to a memory leak.
Align pad_compress_skb() semantics with realloc(): only free the old
skb if allocation and compression succeed. At the call site, use the
new_skb variable so the original skb is not lost when pad_compress_skb()
fails.
Fixes: b3f9b92a6e ("[PPP]: add PPP MPPE encryption module")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://patch.msgid.link/20250903100726.269839-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add proper error checking for dmaengine_desc_get_metadata_ptr() which
can return an error pointer and lead to potential crashes or undefined
behaviour if the pointer retrieval fails.
Properly handle the error by unmapping DMA buffer, freeing the skb and
returning early to prevent further processing with invalid data.
Fixes: 6a91b846af ("net: axienet: Introduce dmaengine support")
Signed-off-by: Abin Joseph <abin.joseph@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/20250903025213.3120181-1-abin.joseph@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal says:
====================
netfilter: updates for net
1) Fix a silly bug in conntrack selftest, busyloop may get optimized to
for (;;), reported by Yi Chen.
2) Introduce new NFTA_DEVICE_PREFIX attribute in nftables netlink api,
re-using old NFTA_DEVICE_NAME led to confusion with different
kernel/userspace versions. This refines the wildcard interface
support added in 6.16 release. From Phil Sutter.
* tag 'nf-25-09-04' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: Introduce NFTA_DEVICE_PREFIX
selftests: netfilter: fix udpclash tool hang
====================
Link: https://patch.msgid.link/20250904072548.3267-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When device_register() return error in atm_register_sysfs(), which can be
triggered by kzalloc fail in device_private_init() or other reasons,
kmemleak reports the following memory leaks:
unreferenced object 0xffff88810182fb80 (size 8):
comm "insmod", pid 504, jiffies 4294852464
hex dump (first 8 bytes):
61 64 75 6d 6d 79 30 00 adummy0.
backtrace (crc 14dfadaf):
__kmalloc_node_track_caller_noprof+0x335/0x450
kvasprintf+0xb3/0x130
kobject_set_name_vargs+0x45/0x120
dev_set_name+0xa9/0xe0
atm_register_sysfs+0xf3/0x220
atm_dev_register+0x40b/0x780
0xffffffffa000b089
do_one_initcall+0x89/0x300
do_init_module+0x27b/0x7d0
load_module+0x54cd/0x5ff0
init_module_from_file+0xe4/0x150
idempotent_init_module+0x32c/0x610
__x64_sys_finit_module+0xbd/0x120
do_syscall_64+0xa8/0x270
entry_SYSCALL_64_after_hwframe+0x77/0x7f
When device_create_file() return error in atm_register_sysfs(), the same
issue also can be triggered.
Function put_device() should be called to release kobj->name memory and
other device resource, instead of kfree().
Fixes: 1fa5ae857b ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250901063537.1472221-1-wangliang74@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This new attribute is supposed to be used instead of NFTA_DEVICE_NAME
for simple wildcard interface specs. It holds a NUL-terminated string
representing an interface name prefix to match on.
While kernel code to distinguish full names from prefixes in
NFTA_DEVICE_NAME is simpler than this solution, reusing the existing
attribute with different semantics leads to confusion between different
versions of kernel and user space though:
* With old kernels, wildcards submitted by user space are accepted yet
silently treated as regular names.
* With old user space, wildcards submitted by kernel may cause crashes
since libnftnl expects NUL-termination when there is none.
Using a distinct attribute type sanitizes these situations as the
receiving part detects and rejects the unexpected attribute nested in
*_HOOK_DEVS attributes.
Fixes: 6d07a28950 ("netfilter: nf_tables: Support wildcard netdev hook specs")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Yi Chen reports that 'udpclash' loops forever depending on compiler
(and optimization level used); while (x == 1) gets optimized into
for (;;). Add volatile qualifier to avoid that.
While at it, also run it under timeout(1) and fix the resize script
to not ignore the timeout passed as second parameter to insert_flood.
Reported-by: Yi Chen <yiche@redhat.com>
Suggested-by: Yi Chen <yiche@redhat.com>
Fixes: 78a5883635 ("selftests: netfilter: add conntrack clash resolution test case")
Signed-off-by: Florian Westphal <fw@strlen.de>
Pull smb server fix from Steve French:
- fix handling filenames with ":" (colon) in them
* tag 'v6.17-rc4-ksmbd-fix' of git://git.samba.org/ksmbd:
ksmbd: allow a filename to contain colons on SMB3.1.1 posix extensions
In mctp_getsockopt(), unrecognized options currently return -EINVAL.
In contrast, mctp_setsockopt() returns -ENOPROTOOPT for unknown
options.
Update mctp_getsockopt() to also return -ENOPROTOOPT for unknown
options. This aligns the behavior of getsockopt() and setsockopt(),
and matches the standard kernel socket API convention for handling
unsupported options.
Fixes: 99ce45d5e7 ("mctp: Implement extended addressing")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250902102059.1370008-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The blamed commit added code which could return an error after we
requested the PHY interrupt. When we return an error, the caller
will call phy_detach() which fails to free the interrupt.
Rearrange the code such that failing operations happen before the
interrupt is requested, thereby allowing phy_detach() to be used.
Note that replacing phy_detach() with phy_disconnect() in these
paths could lead to freeing an interrupt which was never requested.
Fixes: 1942b1c6f6 ("net: phylink: make configuring clock-stop dependent on MAC support")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1ut35k-00000001UEl-0iq6@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-09-02 (ice, idpf, i40e, ixgbe, e1000e)
For ice:
Jake adds checks for initialization of Tx timestamp tracking structure
to prevent NULL pointer dereferences.
For idpf:
Josh moves freeing of auxiliary device id to prevent use-after-free issue.
Emil sets, expected, MAC type value when sending virtchnl add/delete MAC
commands.
For i40e:
Jake removes read debugfs access as 'netdev_ops' has the possibility to
overflow.
Zhen Ni adds handling for when MAC list is empty.
For ixgbe:
Alok Tiwari corrects bitmap being used for link speeds.
For e1000e:
Vitaly adds check to ensure overflow does not occur in
e1000_set_eeprom().
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: fix heap overflow in e1000_set_eeprom
ixgbe: fix incorrect map used in eee linkmode
i40e: Fix potential invalid access when MAC list is empty
i40e: remove read access to debugfs files
idpf: set mac type when adding and removing MAC filters
idpf: fix UAF in RDMA core aux dev deinitialization
ice: fix NULL access of tx->in_use in ice_ll_ts_intr
ice: fix NULL access of tx->in_use in ice_ptp_ts_irq
====================
Link: https://patch.msgid.link/20250902232131.2739555-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The blamed commit introduced the concept of split attribute
counting, and later allocating an array to hold them, however
TypeArrayNest wasn't updated to use the new counting variable.
Abbreviated example from tools/net/ynl/generated/nl80211-user.c:
nl80211_if_combination_attributes_parse(...):
unsigned int n_limits = 0;
[...]
ynl_attr_for_each(attr, nlh, yarg->ys->family->hdr_len)
if (type == NL80211_IFACE_COMB_LIMITS)
ynl_attr_for_each_nested(attr2, attr)
dst->_count.limits++;
if (n_limits) {
dst->_count.limits = n_limits;
/* allocate and parse attributes */
}
In the above example n_limits is guaranteed to always be 0,
hence the conditional is unsatisfiable and is optimized out.
This patch changes the attribute counting to use n_limits++ in the
attribute counting loop in the above example.
Fixes: 58da455b31 ("tools: ynl-gen: improve unwind on parsing errors")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20250902160001.760953-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg says:
====================
Just a few updates:
- a set of buffer overflow fixes
- ath11k: a fix for GTK rekeying
- ath12k: a missed WiFi7 capability
* tag 'wireless-2025-09-03' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: wilc1000: avoid buffer overflow in WID string configuration
wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result()
wifi: libertas: cap SSID len in lbs_associate()
wifi: cw1200: cap SSID length in cw1200_do_join()
wifi: ath11k: fix group data packet drops during rekey
wifi: ath12k: Set EMLSR support flag in MLO flags for EML-capable stations
====================
Link: https://patch.msgid.link/20250903075602.30263-4-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull SoC fixes from Arnd Bergmann:
"These are mainly devicetree fixes for the rockchip and nxp platforms
on arm64, addressing mistakes in the board and soc specific
descriptions.
In particular the newly added Rock 5T board required multiple bugfixes
for PCIe and USB, while on the i.MX platform there are a number of
regulator related fixes. The only other platforms with devicetree
fixes are at91 with a fixup for SD/MMC and a change to enable all the
available UARTS on the Axiado reference board.
Also on the at91 platform, a Kconfig change addresses a regression
that stopped the DMA engine from working in 6.17-rc.
Three drivers each have a simple bugfix, stopping incorrect behavior
in op-tee firmware, the tee subsystem and the qualcomm mdt_loader.
Two trivial MAINTAINERS file changes are needed to make sure that
patches reach the correct maintainer, but don't change the actual
responsibilities"
* tag 'soc-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits)
ARM: dts: microchip: sama7d65: Force SDMMC Legacy mode
ARM: at91: select ARCH_MICROCHIP
arm64: dts: rockchip: fix second M.2 slot on ROCK 5T
arm64: dts: rockchip: fix USB on RADXA ROCK 5T
MAINTAINERS: exclude defconfig from ARM64 PORT
arm64: dts: axiado: Add missing UART aliases
MAINTAINERS: Update Nobuhiro Iwamatsu's email address
arm64: dts: rockchip: Add vcc-supply to SPI flash on Pinephone Pro
arm64: dts: rockchip: fix es8388 address on rk3588s-roc-pc
arm64: dts: rockchip: Fix Bluetooth interrupts flag on Neardi LBA3368
arm64: dts: rockchip: correct network description on Sige5
arm64: dts: rockchip: Minor whitespace cleanup
ARM: dts: rockchip: Minor whitespace cleanup
arm64: dts: rockchip: Add supplies for eMMC on rk3588-orangepi-5
arm64: dts: rockchip: Fix the headphone detection on the orangepi 5 plus
arm64: dts: imx95: Fix JPEG encoder node assigned clock
arm64: dts: imx95-19x19-evk: correct the phy setting for flexcan1/2
arm64: dts: imx8mp: Fix missing microSD slot vqmmc on Data Modul i.MX8M Plus eDM SBC
arm64: dts: imx8mp: Fix missing microSD slot vqmmc on DH electronics i.MX8M Plus DHCOM
arm64: dts: imx8mp-tqma8mpql: remove virtual 3.3V regulator
...
Microchip AT91 fixes for v6.17
This update includes:
- adaptation to the SDHCI capabilities on sama7d65 curiosity board DT as
SDHCI quirks are not in place yet. SD/MMC don't work without these
- addition of one Kconfig symbol that is already used in DMA tree for
6.17. XDMA cannot be selected if not present.
* tag 'at91-fixes-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama7d65: Force SDMMC Legacy mode
ARM: at91: select ARCH_MICROCHIP
Link: https://lore.kernel.org/r/20250903173403.113604-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull bitmap fix from Yury Norov:
"Fix sched_numa_find_nth_cpu() if mask offline
sched_numa_find_nth_cpu() uses a bsearch to look for the 'closest' CPU
in sched_domains_numa_masks and given cpus mask. However they might
not intersect if all CPUs in the cpus mask are offline.
bsearch will return NULL in that case, bail out instead of
dereferencing a bogus pointer"
* tag 'bitmap-for-6.17-rc5' of https://github.com/norov/linux:
sched: Fix sched_numa_find_nth_cpu() if mask offline
The newly added Rock 5T board needed slightly bigger fixes to make the
PCIe and USB actually work, because the PCIe does share its lanes between
two ports and the usb needs to toggle a gpio to supply power.
The other interesting fix is the headphone detection on the Orange Pi 5+.
The rest are some added supplies to make the boot log less scary and a
number of styling fixes.
* tag 'v6.17-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: fix second M.2 slot on ROCK 5T
arm64: dts: rockchip: fix USB on RADXA ROCK 5T
arm64: dts: rockchip: Add vcc-supply to SPI flash on Pinephone Pro
arm64: dts: rockchip: fix es8388 address on rk3588s-roc-pc
arm64: dts: rockchip: Fix Bluetooth interrupts flag on Neardi LBA3368
arm64: dts: rockchip: correct network description on Sige5
arm64: dts: rockchip: Minor whitespace cleanup
ARM: dts: rockchip: Minor whitespace cleanup
arm64: dts: rockchip: Add supplies for eMMC on rk3588-orangepi-5
arm64: dts: rockchip: Fix the headphone detection on the orangepi 5 plus
arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3399-pinebook-pro
arm64: dts: rockchip: mark eeprom as read-only for Radxa E52C
Link: https://lore.kernel.org/r/5909239.Y6S9NjorxK@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Jeff Johnson says:
==================
ath.git update for v6.17-rc5
Fix a long-standing issue with ath11k dropping group data packets
during GTK rekey, and fix an omission in the ath12k multi-link EMLSR
support introduced in v6.16.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
