The amd_pmc_get_smu_version() and amd_pmc_idlemask_read() functions are
used in the probe / suspend/resume code, so they are also used when
CONFIG_DEBUGFS is disabled, move them outside of the #ifdef CONFIG_DEBUGFS
block.
Note this purely moves the code to above the #ifdef CONFIG_DEBUGFS,
the code is completely unchanged.
Fixes: f6045de1f5 ("platform/x86: amd-pmc: Export Idlemask values based on the APU")
Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Cc: Sanket Goswami <Sanket.Goswami@amd.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Adds support for:
- Dell Inspiron 2in1 tablet mode switch notifications. These are
delivered by a type 0x0011 message with code 0xe070, followed by a
flag (1 for laptop mode, 0 for tablet mode).
- Recognising (but not otherwise processing) the Dell Ultra Performance
mode request switch. This is delivered by a type 0x0012 message with
code 0x000d, followed by a parameter that is either 1 or 2. It is
not clear what (if anything) should be done with this notification, so
it is ignored.
Signed-off-by: Troy Rollo <linux2021@troy.rollo.name>
Link: https://lore.kernel.org/r/20210918073131.2966942-1-linux2021@troy.rollo.name
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Previously, `__query_block()` would fail if the
second WCxx method call failed. However, the
WQxx method might have succeeded, and potentially
allocated memory for the result. Instead of
throwing away the result and potentially
leaking memory, ignore the result of
the second WCxx call.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210904175450.156801-25-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
A number of upcoming notebook computer designs drive the internal
display panel's backlight PWM through the Embedded Controller (EC).
This EC-based backlight control can be plumbed through to an ACPI
"WMAA" method interface, which in turn can be wrapped by WMI with
the GUID handle 603E9613-EF25-4338-A3D0-C46177516DB7.
Add a new driver, aliased to the WMAA WMI GUID, to expose a sysfs
backlight class driver to control backlight levels on systems with
EC-driven backlights.
Signed-off-by: Daniel Dadap <ddadap@nvidia.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20210903003838.15797-1-ddadap@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This patch adds support for HP Omen laptops.
It adds support for most things that can be controlled via the
Windows Omen Command Center application.
- Fan speed monitoring through hwmon
- Platform Profile support (cool, balanced, performance)
- Max fan speed function toggle
Also exposes the existing HDD temperature through hwmon since
this driver didn't use hwmon before this patch.
This patch has been tested on a 2020 HP Omen 15 (AMD) 15-en0023dx.
- V1
Initial Patch
- V2
Use standard hwmon ABI attributes
Add existing non-standard "hddtemp" to hwmon
- V3
Fix overflow issue in "hp_wmi_get_fan_speed"
Map max fan speed value back to hwmon values on read
Code style fixes
Fix issue with returning values from "hp_wmi_hwmon_read",
the value to return should be written to val and not just
returned from the function
- V4
Use DMI Board names to detect if a device should use the omen
specific thermal profile method.
Select HWMON instead of depending on it.
Code style fixes.
Replace some error codes with more specific/meaningful ones.
Remove the HDD temperature from HWMON since we don't know what
unit it's expressed in.
Handle error from hp_wmi_hwmon_init
- V5
Handle possible NULL from dmi_get_system_info()
Use match_string function instead of manually checking
Directly use is_omen_thermal_profile() without the static
variable.
Signed-off-by: Enver Balalic <balalic.enver@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210902182234.vtwl72n5rjql22qa@omen.localdomain
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
There have been reports of approximately a 0.9%-1.7% failure rate in SMU
communication timeouts with s0i3 entry on some OEM designs. Currently
the design in amd-pmc is to try every 100us for up to 20ms.
However the GPU driver which also communicates with the SMU using a
mailbox register which the driver polls every 1us for up to 2000ms.
In the GPU driver this was increased by commit 055162645a ("drm/amd/pm:
increase time out value when sending msg to SMU")
Increase the maximum timeout used by amd-pmc to 2000ms to match this
behavior. This has been shown to improve the stability for machines
that randomly have failures.
Cc: stable@kernel.org
Reported-by: Julian Sikorski <belegdol@gmail.com>
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1629
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20210914020115.655-1-mario.limonciello@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add info for getting the firmware directly from the UEFI for the Chuwi Hi10
Plus (CWI527), so that the user does not need to manually install the
firmware in /lib/firmware/silead.
This change will make the touchscreen on these devices work OOTB,
without requiring any manual setup.
Also tweak the min and width/height values a bit for more accurate position
reporting.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210905130210.32810-2-hdegoede@redhat.com
Add touchscreen info for the Chuwi HiBook (CWI514) tablet. This includes
info for getting the firmware directly from the UEFI, so that the user does
not need to manually install the firmware in /lib/firmware/silead.
This change will make the touchscreen on these devices work OOTB,
without requiring any manual setup.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210905130210.32810-1-hdegoede@redhat.com
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Add missing fields and remove some duplicate fields when printing a
perf_event_attr.
- Fix hybrid config terms list corruption.
- Update kernel header copies, some resulted in new kernel features
being automagically added to 'perf trace' syscall/tracepoint argument
id->string translators.
- Add a file generated during the documentation build to .gitignore.
- Add an option to build without libbfd, as some distros, like Debian
consider its ABI unstable.
- Add support to print a textual representation of IBS raw sample data
in 'perf report'.
- Fix bpf 'perf test' sample mismatch reporting
- Fix passing arguments to stackcollapse report in a 'perf script'
python script.
- Allow build-id with trailing zeros.
- Look for ImageBase in PE file to compute .text offset.
* tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits)
tools headers UAPI: Update tools's copy of drm.h headers
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync linux/fs.h with the kernel sources
tools headers UAPI: Sync linux/in.h copy with the kernel sources
perf tools: Add an option to build without libbfd
perf tools: Allow build-id with trailing zeros
perf tools: Fix hybrid config terms list corruption
perf tools: Factor out copy_config_terms() and free_config_terms()
perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields
perf tools: Ignore Documentation dependency file
perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions
tools include UAPI: Update linux/mount.h copy
perf beauty: Cover more flags in the move_mount syscall argument beautifier
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
perf report: Add support to print a textual representation of IBS raw sample data
perf report: Add tools/arch/x86/include/asm/amd-ibs.h
perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings
...
