The minimum interval specified the PMSIDR_EL1.Interval field is a
hardware recommendation. However, this value is set by hardware designer
before the production. It is not actual hardware limitation but tools
currently have no way to test shorter periods.
This change relaxes the limitation by allowing any non-zero periods,
with simplifying code with clamp_t().
The downside is that small periods may increase the risk of AUX ring
buffer overruns. When an overrun occurs, the perf core layer will
trigger an irq work to disable the event and wake up the tool in user
space to read the trace data. After the tool finishes reading, it will
re-enable the AUX event.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250627163028.3503122-1-leo.yan@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The ARMv9.2 architecture introduces the optional Branch Record Buffer
Extension (BRBE), which records information about branches as they are
executed into set of branch record registers. BRBE is similar to x86's
Last Branch Record (LBR) and PowerPC's Branch History Rolling Buffer
(BHRB).
BRBE supports filtering by exception level and can filter just the
source or target address if excluded to avoid leaking privileged
addresses. The h/w filter would be sufficient except when there are
multiple events with disjoint filtering requirements. In this case, BRBE
is configured with a union of all the events' desired branches, and then
the recorded branches are filtered based on each event's filter. For
example, with one event capturing kernel events and another event
capturing user events, BRBE will be configured to capture both kernel
and user branches. When handling event overflow, the branch records have
to be filtered by software to only include kernel or user branch
addresses for that event. In contrast, x86 simply configures LBR using
the last installed event which seems broken.
It is possible on x86 to configure branch filter such that no branches
are ever recorded (e.g. -j save_type). For BRBE, events with a
configuration that will result in no samples are rejected.
Recording branches in KVM guests is not supported like x86. However,
perf on x86 allows requesting branch recording in guests. The guest
events are recorded, but the resulting branches are all from the host.
For BRBE, events with branch recording and "exclude_host" set are
rejected. Requiring "exclude_guest" to be set did not work. The default
for the perf tool does set "exclude_guest" if no exception level
options are specified. However, specifying kernel or user events
defaults to including both host and guest. In this case, only host
branches are recorded.
BRBE can support some additional exception branch types compared to
x86. On x86, all exceptions other than syscalls are recorded as IRQ.
With BRBE, it is possible to better categorize these exceptions. One
limitation relative to x86 is we cannot distinguish a syscall return
from other exception returns. So all exception returns are recorded as
ERET type. The FIQ branch type is omitted as the only FIQ user is Apple
platforms which don't support BRBE. The debug branch types are omitted
as there is no clear need for them.
BRBE records are invalidated whenever events are reconfigured, a new
task is scheduled in, or after recording is paused (and the records
have been recorded for the event). The architecture allows branch
records to be invalidated by the PE under implementation defined
conditions. It is expected that these conditions are rare.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Co-developed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
tested-by: Adam Young <admiyo@os.amperecomputing.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250611-arm-brbe-v19-v23-4-e7775563036e@kernel.org
[will: Fix sparse warnings about mixed declarations and code.
Fix C99 comment syntax.]
Signed-off-by: Will Deacon <will@kernel.org>
While BRBE can record branches within guests, the host recording
branches in guests is not supported by perf (though events are).
Support for BRBE in guests will supported by providing direct access
to BRBE within the guests. That is how x86 LBR works for guests.
Therefore, BRBE needs to be disabled on guest entry and restored on
exit.
For nVHE, this requires explicit handling for guests. Before
entering a guest, save the BRBE state and disable the it. When
returning to the host, restore the state.
For VHE, it is not necessary. We initialize
BRBCR_EL1.{E1BRE,E0BRE}=={0,0} at boot time, and HCR_EL2.TGE==1 while
running in the host. We configure BRBCR_EL2.{E2BRE,E0HBRE} to enable
branch recording in the host. When entering the guest, we set
HCR_EL2.TGE==0 which means BRBCR_EL1 is used instead of BRBCR_EL2.
Consequently for VHE, BRBE recording is disabled at EL1 and EL0 when
running a guest.
Should recording in guests (by the host) ever be desired, the perf ABI
will need to be extended to distinguish guest addresses (struct
perf_branch_entry.priv) for starters. BRBE records would also need to be
invalidated on guest entry/exit as guest/host EL1 and EL0 records can't
be distinguished.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Co-developed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250611-arm-brbe-v19-v23-3-e7775563036e@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
To use the Branch Record Buffer Extension (BRBE), some configuration is
necessary at EL3 and EL2. This patch documents the requirements and adds
the initial EL2 setup code, which largely consists of configuring the
fine-grained traps and initializing a couple of BRBE control registers.
Before this patch, __init_el2_fgt() would initialize HDFGRTR_EL2 and
HDFGWTR_EL2 with the same value, relying on the read/write trap controls
for a register occupying the same bit position in either register. The
'nBRBIDR' trap control only exists in bit 59 of HDFGRTR_EL2, while bit
59 of HDFGWTR_EL2 is RES0, and so this assumption no longer holds.
To handle HDFGRTR_EL2 and HDFGWTR_EL2 having (slightly) different bit
layouts, __init_el2_fgt() is changed to accumulate the HDFGRTR_EL2 and
HDFGWTR_EL2 control bits separately. While making this change the
open-coded value (1 << 62) is replaced with
HDFG{R,W}TR_EL2_nPMSNEVFR_EL1_MASK.
The BRBCR_EL1 and BRBCR_EL2 registers are unusual and require special
initialisation: even though they are subject to E2H renaming, both have
an effect regardless of HCR_EL2.TGE, even when running at EL2. So we
must initialize BRBCR_EL2 in case we run in nVHE mode. This is handled
in __init_el2_brbe() with a comment to explain the situation.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
[Mark: rewrite commit message, fix typo in comment]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Co-developed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
tested-by: Adam Young <admiyo@os.amperecomputing.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250611-arm-brbe-v19-v23-2-e7775563036e@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Arnd reports that Clang's aggressive inlining of arm_cmn_discover() can
lead to stack frame size warnings, and while we could simply prevent
such inlining to hide the issue, it seems more productive to actually
heed the warning and do something about the overall stack footprint.
The xp_region array is already rather large, and CMN_MAX_XPS might only
grow larger in future, however it only serves as a convenience to save
repeating the first level's worth of register reads in the second pass
of discovery. There's no performance concern here, and it only takes a
small tweak to the flow to re-extract the offsets instead of stashing
them, so let's just do that and save several hundred bytes of stack.
Reported-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/e7dd41bf0f1b098e2e4b01ef91318a4b272abff8.1751046159.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
arm64 depends on the cpufreq driver to gain the maximum cpu frequency
to convert the watchdog_thresh to perf event period. cpufreq drivers
like cppc_cpufreq will be initialized lately after the initializing of
the hard lockup detector so just use a safe cpufreq which will be
inaccurency. Use a cpufreq notifier to adjust the event's period to
a more accurate one.
Reviewed-by: Jie Zhan <zhanjie9@hisilicon.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250701110214.27242-3-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Architecture's using perf events for hard lockup detection needs to
convert the watchdog_thresh to the event's period, some architecture
for example arm64 perform this conversion using the CPU's maximum
frequency which will be acquired by cpufreq. However by the time
the lockup detector's initialized the cpufreq driver may not be
initialized, thus launch a watchdog with inaccurate period. Provide
a function hardlockup_detector_perf_adjust_period() to allowing
adjust the event period. Then architecture can update with more
accurate period if cpufreq is initialized.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250701110214.27242-2-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Pull timer cleanup from Thomas Gleixner:
"The delayed from_timer() API cleanup:
The renaming to the timer_*() namespace was delayed due massive
conflicts against Linux-next. Now that everything is upstream finish
the conversion"
* tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename from_timer() to timer_container_of()
Pull x86 fixes from Thomas Gleixner:
"A small set of x86 fixes:
- Cure IO bitmap inconsistencies
A failed fork cleans up all resources of the newly created thread
via exit_thread(). exit_thread() invokes io_bitmap_exit() which
does the IO bitmap cleanups, which unfortunately assume that the
cleanup is related to the current task, which is obviously bogus.
Make it work correctly
- A lockdep fix in the resctrl code removed the clearing of the
command buffer in two places, which keeps stale error messages
around. Bring them back.
- Remove unused trace events"
* tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Restore the rdt_last_cmd_clear() calls after acquiring rdtgroup_mutex
x86/iopl: Cure TIF_IO_BITMAP inconsistencies
x86/fpu: Remove unused trace events
Pull timer fix from Thomas Gleixner:
"Add the missing seq_file forward declaration in the timer namespace
header"
* tag 'timers-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timens: Add struct seq_file forward declaration
Add initial DMR support, which required smarter RAPL probe
Fix AMD MSR RAPL energy reporting
Add RAPL power limit configuration output
Minor fixes
Signed-off-by: Len Brown <len.brown@intel.com>
For the RAPL package energy status counter, Intel and AMD share the same
perf_subsys and perf_name, but with different MSR addresses.
Both rapl_counter_arch_infos[0] and rapl_counter_arch_infos[1] are
introduced to describe this counter for different Vendors.
As a result, the perf counter is probed twice, and causes a failure in
in get_rapl_counters() because expected_read_size and actual_read_size
don't match.
Fix the problem by skipping the already probed counter.
Note, this is not a perfect fix. For example, if different
vendors/platforms use the same MSR value for different purpose, the code
can be fooled when it probes a rapl_counter_arch_infos[] entry that does
not belong to the running Vendor/Platform.
In a long run, better to put rapl_counter_arch_infos[] into the
platform_features so that this becomes Vendor/Platform specific.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
platform_features->rapl_msrs describes the RAPL MSRs supported. While
RAPL Perf counters can be exposed from different kernel backend drivers,
e.g. RAPL MSR I/F driver, or RAPL TPMI I/F driver.
Thus, turbostat should first blindly probe all the available RAPL Perf
counters, and falls back to the RAPL MSR counters if they are listed in
platform_features->rapl_msrs.
With this, platforms that don't have RAPL MSRs can clear the
platform_features->rapl_msrs bits and use RAPL Perf counters only.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Increase the code readability by moving the no_perf/no_msr flag and the
cai->perf_name/cai->msr sanity checks into the counter probe functions.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
probe_rapl_msr() is reused for probing RAPL MSR counters, cstate MSR
counters and MPERF/APERF/SMI MSR counters, thus its name is misleading.
Similar to add_perf_counter(), introduce add_msr_counter() to probe a
counter via MSR. Introduce wrapper function add_rapl_msr_counter() at
the same time to add extra check for Zero return value for specified
RAPL counters.
No functional change intended.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_msr_perf_counter_(), add_msr_perf_counter()
just gives extra debug output on top. There is no need to keep both
functions.
Remove add_msr_perf_counter_() and move all the logic to
add_msr_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_cstate_perf_counter_(),
add_cstate_perf_counter() just gives extra debug output on top. There is
no need to keep both functions.
Remove add_cstate_perf_counter_() and move all the logic to
add_cstate_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_rapl_perf_counter_(), add_rapl_perf_counter()
just gives extra debug output on top. There is no need to keep both
functions.
Remove add_rapl_perf_counter_() and move all the logic to
add_rapl_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Quit early for unsupported RAPL counters.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
rapl_joules bit should always be checked even if
platform_features->rapl_msrs is not set or no_msr flag is used.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 05a2f07db8 ("tools/power turbostat: read RAPL counters via
perf") that adds support to read RAPL counters via perf defines the
notion of a RAPL domain_id which is set to physical_core_id on
platforms which support per_core_rapl counters (Eg: AMD processors
Family 17h onwards) and is set to the physical_package_id on all the
other platforms.
However, the physical_core_id is only unique within a package and on
platforms with multiple packages more than one core can have the same
physical_core_id and thus the same domain_id. (For eg, the first cores
of each package have the physical_core_id = 0). This results in all
these cores with the same physical_core_id using the same entry in the
rapl_counter_info_perdomain[]. Since rapl_perf_init() skips the
perf-initialization for cores whose domain_ids have already been
visited, cores that have the same physical_core_id always read the
perf file corresponding to the physical_core_id of the first package
and thus the package-energy is incorrectly reported to be the same
value for different packages.
Note: This issue only arises when RAPL counters are read via perf and
not when they are read via MSRs since in the latter case the MSRs are
read separately on each core.
Fix this issue by associating each CPU with rapl_core_id which is
unique across all the packages in the system.
Fixes: 05a2f07db8 ("tools/power turbostat: read RAPL counters via perf")
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Len Brown <len.brown@intel.com>
It uses /dev/msrN device paths on Android instead of /dev/cpu/N/msr,
updates error messages and permission checks to reflect the Android
device path, and wraps platform-specific code with #if defined(ANDROID)
to ensure correct behavior on both Android and non-Android systems.
These changes improve compatibility and usability of turbostat on
Android devices.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Pull x86 perf fix from Thomas Gleixner:
"A single fix for the x86 performance counters on Intel CPUs:
The MSR offset calculations for fixed performance counters are stored
at the wrong index in the configuration array causing the general
purpose counter MSR offset to be overwritten, so both the general
purpose and the fixed counters offsets are incorrect.
Correct the array index calculation to fix that"
* tag 'perf-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix incorrect MSR index calculations in intel_pmu_config_acr()
Pull irq fix from Thomas Gleixner:
"A single fix for the PCI/MSI code:
The conversion to per device MSI domains created a MSI domain with
size 1 instead of sizing it to the maximum possible number of MSI
interrupts for the device. This "worked" as the subsequent allocations
resized the domain, but the recent change to move the prepare() call
into the domain creation path broke this works by chance mechanism.
Size the domain properly at creation time"
* tag 'irq-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Size device MSI domain with the maximum number of vectors
Pull mount fixes from Al Viro:
"Various mount-related bugfixes:
- split the do_move_mount() checks in subtree-of-our-ns and
entire-anon cases and adapt detached mount propagation selftest for
mount_setattr
- allow clone_private_mount() for a path on real rootfs
- fix a race in call of has_locked_children()
- fix move_mount propagation graph breakage by MOVE_MOUNT_SET_GROUP
- make sure clone_private_mnt() caller has CAP_SYS_ADMIN in the right
userns
- avoid false negatives in path_overmount()
- don't leak MNT_LOCKED from parent to child in finish_automount()
- do_change_type(): refuse to operate on unmounted/not ours mounts"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_change_type(): refuse to operate on unmounted/not ours mounts
clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns
selftests/mount_setattr: adapt detached mount propagation test
do_move_mount(): split the checks in subtree-of-our-ns and entire-anon cases
fs: allow clone_private_mount() for a path on real rootfs
fix propagation graph breakage by MOVE_MOUNT_SET_GROUP move_mount(2)
finish_automount(): don't leak MNT_LOCKED from parent to child
path_overmount(): avoid false negatives
fs/fhandle.c: fix a race in call of has_locked_children()
Pull more smb client updates from Steve French:
- multichannel/reconnect fixes
- move smbdirect (smb over RDMA) defines to fs/smb/common so they will
be able to be used in the future more broadly, and a documentation
update explaining setting up smbdirect mounts
- update email address for Paulo
* tag '6.16-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
MAINTAINERS, mailmap: Update Paulo Alcantara's email address
cifs: add documentation for smbdirect setup
cifs: do not disable interface polling on failure
cifs: serialize other channels when query server interfaces is pending
cifs: deal with the channel loading lag while picking channels
smb: client: make use of common smbdirect_socket_parameters
smb: smbdirect: introduce smbdirect_socket_parameters
smb: client: make use of common smbdirect_socket
smb: smbdirect: add smbdirect_socket.h
smb: client: make use of common smbdirect.h
smb: smbdirect: add smbdirect.h with public structures
smb: client: make use of common smbdirect_pdu.h
smb: smbdirect: add smbdirect_pdu.h with protocol definitions
Pull more tracing fixes from Steven Rostedt:
- Fix regression of waiting a long time on updating trace event filters
When the faultable trace points were added, it needed task trace RCU
synchronization.
This was added to the tracepoint_synchronize_unregister() function.
The filter logic always called this function whenever it updated the
trace event filters before freeing the old filters. This increased
the time of "trace-cmd record" from taking 13 seconds to running over
2 minutes to complete.
Move the freeing of the filters to call_rcu*() logic, which brings
the time back down to 13 seconds.
- Fix ring_buffer_subbuf_order_set() error path lock protection
The error path of the ring_buffer_subbuf_order_set() released the
mutex too early and allowed subsequent accesses to setting the
subbuffer size to corrupt the data and cause a bug.
By moving the mutex locking to the end of the error path, it prevents
the reentrant access to the critical data and also allows the
function to convert the taking of the mutex over to the guard()
logic.
- Remove unused power management clock events
The clock events were added in 2010 for power management. In 2011 arm
used them. In 2013 the code they were used in was removed. These
events have been wasting memory since then.
- Fix sparse warnings
There was a few places that sparse warned about trace_events_filter.c
where file->filter was referenced directly, but it is annotated with
an __rcu tag. Use the helper functions and fix them up to use
rcu_dereference() properly.
* tag 'trace-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Add rcu annotation around file->filter accesses
tracing: PM: Remove unused clock events
ring-buffer: Fix buffer locking in ring_buffer_subbuf_order_set()
tracing: Fix regression of filter waiting a long time on RCU synchronization
Pull Kbuild updates from Masahiro Yamada:
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which
exports a symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
* tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
genksyms: Fix enum consts from a reference affecting new values
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES}
efi/libstub: use 'targets' instead of extra-y in Makefile
module: make __mod_device_table__* symbols static
scripts/misc-check: check unnecessary #include <linux/export.h> when W=1
scripts/misc-check: check missing #include <linux/export.h> when W=1
scripts/misc-check: add double-quotes to satisfy shellcheck
kbuild: move W=1 check for scripts/misc-check to top-level Makefile
scripts/tags.sh: allow to use alternative ctags implementation
kconfig: introduce menu type enum
docs: symbol-namespaces: fix reST warning with literal block
kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n
tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
docs/core-api/symbol-namespaces: drop table of contents and section numbering
modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time
kbuild: move kbuild syntax processing to scripts/Makefile.build
Makefile: remove dependency on archscripts for header installation
Documentation/kbuild: Add new gendwarfksyms kABI rules
Documentation/kbuild: Drop section numbers
...
Pull sh updates from John Paul Adrian Glaubitz:
- replace the __ASSEMBLY__ with __ASSEMBLER__ macro in all headers
since the latter is now defined automatically by both GCC and Clang
when compiling assembly code (Thomas Huth)
- set the default SPI mode for the ecovec24 board which became
necessary after a new mode member as added to the sh_msiof_spi_info
struct in cf9e4784f3 ("spi: sh-msiof: Add slave mode support")
(Geert Uytterhoeven)
- remove unused variables in the kprobes code in
kprobe_exceptions_notify() (Mike Rapoport)
* tag 'sh-for-v6.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: kprobes: Remove unused variables in kprobe_exceptions_notify()
sh: ecovec24: Make SPI mode explicit
sh: Replace __ASSEMBLY__ with __ASSEMBLER__ in all headers
Pull LoongArch updates from Huacai Chen:
- Adjust the 'make install' operation
- Support SCHED_MC (Multi-core scheduler)
- Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
- Enable HAVE_ARCH_STACKLEAK
- Increase max supported CPUs up to 2048
- Introduce the numa_memblks conversion
- Add PWM controller nodes in dts
- Some bug fixes and other small changes
* tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
platform/loongarch: laptop: Unregister generic_sub_drivers on exit
platform/loongarch: laptop: Add backlight power control support
platform/loongarch: laptop: Get brightness setting from EC on probe
LoongArch: dts: Add PWM support to Loongson-2K2000
LoongArch: dts: Add PWM support to Loongson-2K1000
LoongArch: dts: Add PWM support to Loongson-2K0500
LoongArch: vDSO: Correctly use asm parameters in syscall wrappers
LoongArch: Fix panic caused by NULL-PMD in huge_pte_offset()
LoongArch: Preserve firmware configuration when desired
LoongArch: Avoid using $r0/$r1 as "mask" for csrxchg
LoongArch: Introduce the numa_memblks conversion
LoongArch: Increase max supported CPUs up to 2048
LoongArch: Enable HAVE_ARCH_STACKLEAK
LoongArch: Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
LoongArch: Add SCHED_MC (Multi-core scheduler) support
LoongArch: Add some annotations in archhelp
LoongArch: Using generic scripts/install.sh in `make install`
LoongArch: Add a default install.sh
Pull sound fixes from Takashi Iwai:
"A collection of fix patches for the 6.16-rc1 merge window.
Most of changes are about ASoC, especially lots of AVS driver fixes.
Larger LOCs are seen in TAS571x codec drivers, but the changes are
trivial and safe. The rest are all device-specific small fixes"
* tag 'sound-fix-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (27 commits)
ASoC: Intel: avs: boards: Fix rt5663 front end name
ASoC: Intel: avs: Simplify verification of parse_int_array() result
ALSA: usb-audio: Add implicit feedback quirk for RODE AI-1
ALSA: hda: Ignore unsol events for cards being shut down
ALSA: hda: Add new pci id for AMD GPU display HD audio controller
ALSA: hda: cs35l41: Constify regmap_irq_chip
ALSA: usb-audio: Add a quirk for Lenovo Thinkpad Thunderbolt 3 dock
ASoC: ti: omap-hdmi: Re-add dai_link->platform to fix card init
ASoC: pcm: Do not open FEs with no BEs connected
ASoC: rt1320: fix speaker noise when volume bar is 100%
ASoC: Intel: avs: Include missing string.h
ASoC: Intel: avs: Verify content returned by parse_int_array()
ASoC: Intel: avs: Verify kcalloc() status when setting constraints
ASoC: Intel: avs: Fix paths in MODULE_FIRMWARE hints
ASoC: Intel: avs: Fix possible null-ptr-deref when initing hw
ASoC: Intel: avs: Fix PPLCxFMT calculation
ASoC: Intel: avs: Fix deadlock when the failing IPC is SET_D0IX
ASoC: codecs: hda: Fix RPM usage count underflow
ASoC: amd: yc: Add support for Lenovo Yoga 7 16ARP8
ASoC: tas571x: fix tas5733 num_controls
...
