We currently only use the masking (RES0/RES1) facility for VNCR
registers, as they are memory-based and thus easy to sanitise.
But we could apply the same thing to other registers if we:
- split the sanitisation from __VNCR_START__
- apply the sanitisation when reading from a HW register
This involves a new "marker" in the vcpu_sysreg enum, which
defines the point at which the sanitisation applies (the VNCR
registers being of course after this marker).
Whle we are at it, rename kvm_vcpu_sanitise_vncr_reg() to
kvm_vcpu_apply_reg_masks(), which is vaguely more explicit,
and harden set_sysreg_masks() against setting masks for
random registers...
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20241023145345.1613824-10-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
For code that accesses any of the guest registers for emulation
purposes, it is crucial to know where the most up-to-date data is.
While this is pretty clear for nVHE (memory is the sole repository),
things are a lot muddier for VHE, as depending on the SYSREGS_ON_CPU
flag, registers can either be loaded on the HW or be in memory.
Even worse with NV, where the loaded state is by definition partial.
For these reasons, KVM offers the vcpu_read_sys_reg() and
vcpu_write_sys_reg() primitives that always do the right thing.
However, these primitive must know what register to access, and
this is the role of the __vcpu_read_sys_reg_from_cpu() and
__vcpu_write_sys_reg_to_cpu() helpers.
As it turns out, TCR2_EL1, PIR_EL1, PIRE0_EL1 and not described
in the latter helpers, meaning that the AT code cannot use them
to emulate S1PIE.
Add the three registers to the (long) list.
Fixes: 86f9de9db1 ("KVM: arm64: Save/restore PIE registers")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20241023145345.1613824-9-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Whenever we need to restore the guest's system registers to the CPU, we
now need to take care of the EL2 system registers as well. Most of them
are accessed via traps only, but some have an immediate effect and also
a guest running in VHE mode would expect them to be accessible via their
EL1 encoding, which we do not trap.
For vEL2 we write the virtual EL2 registers with an identical format directly
into their EL1 counterpart, and translate the few registers that have a
different format for the same effect on the execution when running a
non-VHE guest guest hypervisor.
Based on an initial patch from Andre Przywara, rewritten many times
since.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241023145345.1613824-8-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Accessing CNTHCTL_EL2 is fraught with danger if running with
HCR_EL2.E2H=1: half of the bits are held in CNTKCTL_EL1, and
thus can be changed behind our back, while the rest lives
in the CNTHCTL_EL2 shadow copy that is memory-based.
Yes, this is a lot of fun!
Make sure that we merge the two on read access, while we can
write to CNTKCTL_EL1 in a more straightforward manner.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241023145345.1613824-7-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
As KVM has grown a bunch of new system register for NV, it appears
that we are missing them in the get_el2_to_el1_mapping() list.
Most of them are not crucial as they don't tend to be accessed via
vcpu_read_sys_reg() and vcpu_write_sys_reg().
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241023145345.1613824-6-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Despite what the documentation says, TCR2_EL2.{SKL0,SKL1} do not exist,
and the corresponding information is in the respective TTBRx_EL2. This
is a leftover from a development version of the architecture.
This change makes TCR2_EL2 similar to TCR2_EL1 in that respect.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241023145345.1613824-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Pull x86 fixes from Borislav Petkov:
- Prevent a certain range of pages which get marked as hypervisor-only,
to get allocated to a CoCo (SNP) guest which cannot use them and thus
fail booting
- Fix the microcode loader on AMD to pay attention to the stepping of a
patch and to handle the case where a BIOS config option splits the
machine into logical NUMA nodes per L3 cache slice
- Disable LAM from being built by default due to security concerns
* tag 'x86_urgent_for_v6.12_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Ensure that RMP table fixups are reserved
x86/microcode/AMD: Split load_microcode_amd()
x86/microcode/AMD: Pay attention to the stepping dynamically
x86/lam: Disable ADDRESS_MASKING in most cases
Pull ftrace fixes from Steven Rostedt:
- Fix missing mutex unlock in error path of register_ftrace_graph()
A previous fix added a return on an error path and forgot to unlock
the mutex. Instead of dealing with error paths, use guard(mutex) as
the mutex is just released at the exit of the function anyway. Other
functions in this file should be updated with this, but that's a
cleanup and not a fix.
- Change cpuhp setup name to be consistent with other cpuhp states
The same fix that the above patch fixes added a cpuhp_setup_state()
call with the name of "fgraph_idle_init". I was informed that it
should instead be something like: "fgraph:online". Update that too.
* tag 'ftrace-v6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fgraph: Change the name of cpuhp state to "fgraph:online"
fgraph: Fix missing unlock in register_ftrace_graph()
Pull x86 platform driver fixes from Hans de Goede:
- Asus thermal profile fix, fixing performance issues on Lunar Lake
- Intel PMC: one revert for a lockdep issue and one bugfix
- Dell WMI: Ignore some WMI events on suspend/resume to silence warnings
* tag 'platform-drivers-x86-v6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-wmi: Fix thermal profile initialization
platform/x86: dell-wmi: Ignore suspend notifications
platform/x86/intel/pmc: Fix pmc_core_iounmap to call iounmap for valid addresses
platform/x86:intel/pmc: Revert "Enable the ACPI PM Timer to be turned off when suspended"
Pull firewire fix from Takashi Sakamoto:
"A single commit to resolve a regression existing in v6.11 or later.
The change in 1394 OHCI driver in v6.11 kernel could cause general
protection faults when rediscovering nodes in IEEE 1394 bus while
holding a spin lock. Consequently, watchdog checks can report a hard
lockup.
Currently, this issue is observed primarily during the system resume
phase when using an extra node with three ports or more is used.
However, it could potentially occur in the other cases as well"
* tag 'firewire-fixes-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: fix invalid port index for parent device
Pull block fixes from Jens Axboe:
- Pull request for MD via Song fixing a few issues
- Fix a wrong check in blk_rq_map_user_bvec(), causing IO errors on
passthrough IO (Xinyu)
* tag 'block-6.12-20241026' of git://git.kernel.dk/linux:
block: fix sanity checks in blk_rq_map_user_bvec
md/raid10: fix null ptr dereference in raid10_size()
md: ensure child flush IO does not affect origin bio->bi_status
Pull xfs fixes from Carlos Maiolino:
- Fix recovery of allocator ops after a growfs
- Do not fail repairs on metadata files with no attr fork
* tag 'xfs-6.12-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: update the pag for the last AG at recovery time
xfs: don't use __GFP_RETRY_MAYFAIL in xfs_initialize_perag
xfs: error out when a superblock buffer update reduces the agcount
xfs: update the file system geometry after recoverying superblock buffers
xfs: merge the perag freeing helpers
xfs: pass the exact range to initialize to xfs_initialize_perag
xfs: don't fail repairs on metadata files with no attr fork
In a commit 24b7f8e5cd ("firewire: core: use helper functions for self
ID sequence"), the enumeration over self ID sequence was refactored with
some helper functions with KUnit tests. These helper functions are
guaranteed to work expectedly by the KUnit tests, however their application
includes a mistake to assign invalid value to the index of port connected
to parent device.
This bug affects the case that any extra node devices which has three or
more ports are connected to 1394 OHCI controller. In the case, the path
to update the tree cache could hits WARN_ON(), and gets general protection
fault due to the access to invalid address computed by the invalid value.
This commit fixes the bug to assign correct port index.
Cc: stable@vger.kernel.org
Reported-by: Edmund Raile <edmund.raile@proton.me>
Closes: https://lore.kernel.org/lkml/8a9902a4ece9329af1e1e42f5fea76861f0bf0e8.camel@proton.me/
Fixes: 24b7f8e5cd ("firewire: core: use helper functions for self ID sequence")
Link: https://lore.kernel.org/r/20241025034137.99317-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Pull more 9p reverts from Dominique Martinet:
"Revert patches causing inode collision problems.
The code simplification introduced significant regressions on servers
that do not remap inode numbers when exporting multiple underlying
filesystems with colliding inodes. See the top-most revert (commit
be2ca38253) for details.
This problem had been ignored for too long and the reverts will also
head to stable (6.9+).
I'm confident this set of patches gets us back to previous behaviour
(another related patch had already been reverted back in April and
we're almost back to square 1, and the rest didn't touch inode
lifecycle)"
* tag '9p-for-6.12-rc5' of https://github.com/martinetd/linux:
Revert "fs/9p: simplify iget to remove unnecessary paths"
Revert "fs/9p: fix uaf in in v9fs_stat2inode_dotl"
Revert "fs/9p: remove redundant pointer v9ses"
Revert " fs/9p: mitigate inode collisions"
Pull fuse fixes from Miklos Szeredi:
- Fix cached size after passthrough writes
This fix needed a trivial change in the backing-file API, which
resulted in some non-fuse files being touched.
- Revert a commit meant as a cleanup but which triggered a WARNING
- Remove a stray debug line left-over
* tag 'fuse-fixes-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: remove stray debug line
Revert "fuse: move initialization of fuse_file to fuse_writepages() instead of in callback"
fuse: update inode size after extending passthrough write
fs: pass offset and result to backing_file end_write() callback
Pull nfsd fixes from Chuck Lever:
- Fix a couple of use-after-free bugs
* tag 'nfsd-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: cancel nfsd_shrinker_work using sync mode in nfs4_state_shutdown_net
nfsd: fix race between laundromat and free_stateid
Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI PRM (Platform Runtime Mechanism) issue and add two
new DMI quirks, one for an ACPI IRQ override and one for lid switch
detection:
- Make acpi_parse_prmt() look for EFI_MEMORY_RUNTIME memory regions
only to comply with the UEFI specification and make PRM use
efi_guid_t instead of guid_t to avoid a compiler warning triggered
by that change (Koba Ko, Dan Carpenter)
- Add an ACPI IRQ override quirk for LG 16T90SP (Christian Heusel)
- Add a lid switch detection quirk for Samsung Galaxy Book2 (Shubham
Panwar)"
* tag 'acpi-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PRM: Clean up guid type in struct prm_handler_info
ACPI: button: Add DMI quirk for Samsung Galaxy Book2 to fix initial lid detection issue
ACPI: resource: Add LG 16T90SP to irq1_level_low_skip_override[]
ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context
Pull power management fixes from Rafael Wysocki:
"Update cpufreq documentation to match the code after recent changes
(Christian Loehle), fix a units conversion issue in the CPPC cpufreq
driver (liwei), and fix an error check in the dtpm_devfreq power
capping driver (Yuan Can)"
* tag 'pm-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: CPPC: fix perf_to_khz/khz_to_perf conversion exception
powercap: dtpm_devfreq: Fix error check against dev_pm_qos_add_request()
cpufreq: docs: Reflect latency changes in docs
Pull pci fixes from Bjorn Helgaas:
- Hold the rescan lock while adding devices to avoid race with
concurrent pwrctl rescan that can lead to a crash (Bartosz
Golaszewski)
- Avoid binding pwrctl driver to QCom WCN wifi if the DT lacks the
necessary PMU regulator descriptions (Bartosz Golaszewski)
* tag 'pci-v6.12-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/pwrctl: Abandon QCom WCN probe on pre-pwrseq device-trees
PCI: Hold rescan lock while adding devices during host probe
Pull gpio fix from Bartosz Golaszewski:
"Update MAINTAINERS with a keyword pattern for legacy GPIO API
The goal is to alert us to anyone trying to use the deprecated, legacy
API (this happens almost every release)"
* tag 'gpio-fixes-for-v6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: add a keyword entry for the GPIO subsystem
Pull ata fix from Niklas Cassel:
- Fix the handling of ATA commands that timeout (command that did not
receive a completion interrupt within the configured timeout time).
Commands that timeout, while also having either the FAILFAST flag
set, or the command being a passthrough command, should never be
retried. Restore this behavior (as it was before v6.12-rc1).
* tag 'ata-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata: Set DID_TIME_OUT for commands that actually timed out
Pull sound fixes from Takashi Iwai:
"The majority of changes here are about ASoC.
There are two core changes in ASoC (the bump of minimal topology ABI
version and the fix for references of components in DAPM code), and
others are mostly various device-specific fixes for SoundWire, AMD,
Intel, SOF, Qualcomm and FSL, in addition to a few usual HD-audio
quirks and fixes"
* tag 'sound-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits)
ALSA: hda/realtek: Update default depop procedure
ASoC: qcom: sc7280: Fix missing Soundwire runtime stream alloc
ASoC: fsl_micfil: Add sample rate constraint
ASoC: rt722-sdca: increase clk_stop_timeout to fix clock stop issue
ALSA: hda/tas2781: select CRC32 instead of CRC32_SARWATE
ALSA: hda/realtek: Add subwoofer quirk for Acer Predator G9-593
ALSA: firewire-lib: Avoid division by zero in apply_constraint_to_size()
ASoC: fsl_micfil: Add a flag to distinguish with different volume control types
ASoC: codecs: lpass-rx-macro: fix RXn(rx,n) macro for DSM_CTL and SEC7 regs
ASoC: Change my e-mail to gmail
ASoC: Intel: soc-acpi: lnl: Add match entry for TM2 laptops
ASoC: amd: yc: Fix non-functional mic on ASUS E1404FA
ASoC: SOF: Intel: hda: Always clean up link DMA during stop
soundwire: intel_ace2x: Send PDI stream number during prepare
ASoC: SOF: Intel: hda: Handle prepare without close for non-HDA DAI's
ASoC: SOF: ipc4-topology: Do not set ALH node_id for aggregated DAIs
MAINTAINERS: Update maintainer list for MICROCHIP ASOC, SSC and MCP16502 drivers
ASoC: qcom: Select missing common Soundwire module code on SDM845
ASoC: fsl_esai: change dev_warn to dev_dbg in irq handler
ASoC: rsnd: Fix probe failure on HiHope boards due to endpoint parsing
...
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, mostly amdgpu and xe, with minor bridge and an i915
Kconfig fix. Nothing too scary and it seems to be pretty quiet.
amdgpu:
- ACPI method handling fixes
- SMU 14.x fixes
- Display idle optimization fix
- DP link layer compliance fix
- SDMA 7.x fix
- PSR-SU fix
- SWSMU fix
i915:
- Fix DRM_I915_GVT_KVMGT dependencies in Kconfig
xe:
- Increase invalidation timeout to avoid errors in some hosts
- Flush worker on timeout
- Better handling for force wake failure
- Improve argument check on user fence creation
- Don't restart parallel queues multiple times on GT reset
bridge:
- aux: Fix assignment of OF node
- tc358767: Add missing of_node_put() in error path"
* tag 'drm-fixes-2024-10-25' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe: Don't restart parallel queues multiple times on GT reset
drm/xe/ufence: Prefetch ufence addr to catch bogus address
drm/xe: Handle unreliable MMIO reads during forcewake
drm/xe/guc/ct: Flush g2h worker in case of g2h response timeout
drm/xe: Enlarge the invalidation timeout from 150 to 500
drm/amdgpu: handle default profile on on devices without fullscreen 3D
drm/amd/display: Disable PSR-SU on Parade 08-01 TCON too
drm/amdgpu: fix random data corruption for sdma 7
drm/amd/display: temp w/a for DP Link Layer compliance
drm/amd/display: temp w/a for dGPU to enter idle optimizations
drm/amd/pm: update deep sleep status on smu v14.0.2/3
drm/amd/pm: update overdrive function on smu v14.0.2/3
drm/amd/pm: update the driver-fw interface file for smu v14.0.2/3
drm/amd: Guard against bad data for ATIF ACPI method
drm/bridge: tc358767: fix missing of_node_put() in for_each_endpoint_of_node()
drm/bridge: Fix assignment of the of_node of the parent to aux bridge
i915: fix DRM_I915_GVT_KVMGT dependencies
The x86 user pointer validation changes made me look at compiler output
a lot, and the wrong indentation for the ".popsection" in the generated
assembler triggered me.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It turns out that AMD has a "Meltdown Lite(tm)" issue with non-canonical
accesses in kernel space. And so using just the high bit to decide
whether an access is in user space or kernel space ends up with the good
old "leak speculative data" if you have the right gadget using the
result:
CVE-2020-12965 “Transient Execution of Non-Canonical Accesses“
Now, the kernel surrounds the access with a STAC/CLAC pair, and those
instructions end up serializing execution on older Zen architectures,
which closes the speculation window.
But that was true only up until Zen 5, which renames the AC bit [1].
That improves performance of STAC/CLAC a lot, but also means that the
speculation window is now open.
Note that this affects not just the new address masking, but also the
regular valid_user_address() check used by access_ok(), and the asm
version of the sign bit check in the get_user() helpers.
It does not affect put_user() or clear_user() variants, since there's no
speculative result to be used in a gadget for those operations.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Link: https://lore.kernel.org/all/80d94591-1297-4afb-b510-c665efd37f10@citrix.com/
Link: https://lore.kernel.org/all/20241023094448.GAZxjFkEOOF_DM83TQ@fat_crate.local/ [1]
Link: https://www.amd.com/en/resources/product-security/bulletin/amd-sb-1010.html
Link: https://arxiv.org/pdf/2108.10771
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Tested-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com> # LAM case
Fixes: 2865baf540 ("x86: support user address masking instead of non-speculative conditional")
Fixes: 6014bc2756 ("x86-64: make access_ok() independent of LAM")
Fixes: b19b74bc99 ("x86/mm: Rework address range check in get_user() and put_user()")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge a dtpm_devfreq power capping driver fix for 6.12-rc5:
- Fix a dev_pm_qos_add_request() return value check in
__dtpm_devfreq_setup() to prevent it from failing if
a positive number is returned (Yuan Can).
* pm-powercap:
powercap: dtpm_devfreq: Fix error check against dev_pm_qos_add_request()
Merge new DMI quirks for 6.12-rc5:
- Add an ACPI IRQ override quirk for LG 16T90SP (Christian Heusel).
- Add a lid switch detection quirk for Samsung Galaxy Book2 (Shubham
Panwar).
* acpi-resource:
ACPI: resource: Add LG 16T90SP to irq1_level_low_skip_override[]
* acpi-button:
ACPI: button: Add DMI quirk for Samsung Galaxy Book2 to fix initial lid detection issue
Pull bpf fixes from Daniel Borkmann:
- Fix an out-of-bounds read in bpf_link_show_fdinfo for BPF sockmap
link file descriptors (Hou Tao)
- Fix BPF arm64 JIT's address emission with tag-based KASAN enabled
reserving not enough size (Peter Collingbourne)
- Fix BPF verifier do_misc_fixups patching for inlining of the
bpf_get_branch_snapshot BPF helper (Andrii Nakryiko)
- Fix a BPF verifier bug and reject BPF program write attempts into
read-only marked BPF maps (Daniel Borkmann)
- Fix perf_event_detach_bpf_prog error handling by removing an invalid
check which would skip BPF program release (Jiri Olsa)
- Fix memory leak when parsing mount options for the BPF filesystem
(Hou Tao)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Check validity of link->type in bpf_link_show_fdinfo()
bpf: Add the missing BPF_LINK_TYPE invocation for sockmap
bpf: fix do_misc_fixups() for bpf_get_branch_snapshot()
bpf,perf: Fix perf_event_detach_bpf_prog error handling
selftests/bpf: Add test for passing in uninit mtu_len
selftests/bpf: Add test for writes to .rodata
bpf: Remove MEM_UNINIT from skb/xdp MTU helpers
bpf: Fix overloading of MEM_UNINIT's meaning
bpf: Add MEM_WRITE attribute
bpf: Preserve param->string when parsing mount options
bpf, arm64: Fix address emission with tag-based KASAN enabled
Pull networking fixes from Paolo Abeni:
"Including fixes from netfiler, xfrm and bluetooth.
Oddly this includes a fix for a posix clock regression; in our
previous PR we included a change there as a pre-requisite for
networking one. That fix proved to be buggy and requires the follow-up
included here. Thomas suggested we should send it, given we sent the
buggy patch.
Current release - regressions:
- posix-clock: Fix unbalanced locking in pc_clock_settime()
- netfilter: fix typo causing some targets not to load on IPv6
Current release - new code bugs:
- xfrm: policy: remove last remnants of pernet inexact list
Previous releases - regressions:
- core: fix races in netdev_tx_sent_queue()/dev_watchdog()
- bluetooth: fix UAF on sco_sock_timeout
- eth: hv_netvsc: fix VF namespace also in synthetic NIC
NETDEV_REGISTER event
- eth: usbnet: fix name regression
- eth: be2net: fix potential memory leak in be_xmit()
- eth: plip: fix transmit path breakage
Previous releases - always broken:
- sched: deny mismatched skip_sw/skip_hw flags for actions created by
classifiers
- netfilter: bpf: must hold reference on net namespace
- eth: virtio_net: fix integer overflow in stats
- eth: bnxt_en: replace ptp_lock with irqsave variant
- eth: octeon_ep: add SKB allocation failures handling in
__octep_oq_process_rx()
Misc:
- MAINTAINERS: add Simon as an official reviewer"
* tag 'net-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
net: dsa: mv88e6xxx: support 4000ps cycle counter period
net: dsa: mv88e6xxx: read cycle counter period from hardware
net: dsa: mv88e6xxx: group cycle counter coefficients
net: usb: qmi_wwan: add Fibocom FG132 0x0112 composition
hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event
net: dsa: microchip: disable EEE for KSZ879x/KSZ877x/KSZ876x
Bluetooth: ISO: Fix UAF on iso_sock_timeout
Bluetooth: SCO: Fix UAF on sco_sock_timeout
Bluetooth: hci_core: Disable works on hci_unregister_dev
posix-clock: posix-clock: Fix unbalanced locking in pc_clock_settime()
r8169: avoid unsolicited interrupts
net: sched: use RCU read-side critical section in taprio_dump()
net: sched: fix use-after-free in taprio_change()
net/sched: act_api: deny mismatched skip_sw/skip_hw flags for actions created by classifiers
net: usb: usbnet: fix name regression
mlxsw: spectrum_router: fix xa_store() error checking
virtio_net: fix integer overflow in stats
net: fix races in netdev_tx_sent_queue()/dev_watchdog()
net: wwan: fix global oob in wwan_rtnl_policy
netfilter: xtables: fix typo causing some targets not to load on IPv6
...
Pull HID fixes from Jiri Kosina:
"Device-specific functionality quirks for Thinkpad X1 Gen3, Logitech
Bolt and some Goodix touchpads (Bartłomiej Maryńczak, Hans de Goede
and Kenneth Albanowski)"
* tag 'hid-for-linus-20241024' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: lenovo: Add support for Thinkpad X1 Tablet Gen 3 keyboard
HID: multitouch: Add quirk for Logitech Bolt receiver w/ Casa touchpad
HID: i2c-hid: Delayed i2c resume wakeup for 0x0d42 Goodix touchpad
This reverts commit 724a08450f.
This code simplification introduced significant regressions on servers
that do not remap inode numbers when exporting multiple underlying
filesystems with colliding inodes, as can be illustrated with simple
tmpfs exports in qemu with remapping disabled:
```
# host side
cd /tmp/linux-test
mkdir m1 m2
mount -t tmpfs tmpfs m1
mount -t tmpfs tmpfs m2
mkdir m1/dir m2/dir
echo foo > m1/dir/foo
echo bar > m2/dir/bar
# guest side
# started with -virtfs local,path=/tmp/linux-test,mount_tag=tmp,security_model=mapped-file
mount -t 9p -o trans=virtio,debug=1 tmp /mnt/t
ls /mnt/t/m1/dir
# foo
ls /mnt/t/m2/dir
# bar (works ok if directry isn't open)
# cd to keep first dir's inode alive
cd /mnt/t/m1/dir
ls /mnt/t/m2/dir
# foo (should be bar)
```
Other examples can be crafted with regular files with fscache enabled,
in which case I/Os just happen to the wrong file leading to
corruptions, or guest failing to boot with:
| VFS: Lookup of 'com.android.runtime' in 9p 9p would have caused loop
In theory, we'd want the servers to be smart enough and ensure they
never send us two different files with the same 'qid.path', but while
qemu has an option to remap that is recommended (and qemu prints a
warning if this case happens), there are many other servers which do
not (kvmtool, nfs-ganesha, probably diod...), we should at least ensure
we don't cause regressions on this:
- assume servers can't be trusted and operations that should get a 'new'
inode properly do so. commit d05dcfdf5e (" fs/9p: mitigate inode
collisions") attempted to do this, but v9fs_fid_iget_dotl() was not
called so some higher level of caching got in the way; this needs to be
fixed properly before we can re-apply the patches.
- if we ever want to really simplify this code, we will need to add some
negotiation with the server at mount time where the server could claim
they handle this properly, at which point we could optimize this out.
(but that might not be needed at all if we properly handle the 'new'
check?)
Fixes: 724a08450f ("fs/9p: simplify iget to remove unnecessary paths")
Reported-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/all/20240408141436.GA17022@redhat.com/
Link: https://lkml.kernel.org/r/20240923100508.GA32066@willie-the-truck
Cc: stable@vger.kernel.org # v6.9+
Message-ID: <20241024-revert_iget-v1-4-4cac63d25f72@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
