This pull request contains Broadcom SoCs driver changes for 6.2, please
pull the following:
- Yuan uses dev_err_probe() in the Raspberry Pi firmware provider to
simplify the error handling code
- Rafal adds support for initialiazing the BCM47xx NVMEM/NVRAM firmware
provider out of memory-mapped flash devices.
* tag 'arm-soc/for-6.2/drivers' of https://github.com/Broadcom/stblinux:
firmware/nvram: bcm47xx: support init from IO memory
firmware: raspberrypi: Use dev_err_probe() to simplify code
Link: https://lore.kernel.org/r/20221129191755.542584-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The BPMP firmware driver never worked on big-endian kernels, and
cannot easily be made portable. Add a dependency to make this clear
in case anyone ever wants to try a big-endian kernel on this hardware.
Link: https://lore.kernel.org/linux-arm-kernel/Y34FCQ3xTmcjqKRT@orome/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
TI SoC driver updates for v6.2 v2
* Minor bugfixes for knav_qmss_queue, smartreflex drivers
* API optimizations including using devm, bitmap apis to
ti-sci, soc-info drivers
* k3-ringacc can now be built as modules for certain
distros that mandate such usage.
* k3-socinfo can now detect AM62A SoCs.
* tag 'ti-driver-soc-for-v6.2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
soc: ti: k3-socinfo: Add AM62Ax JTAG ID
soc: ti: smartreflex: Fix PM disable depth imbalance in omap_sr_probe
soc: ti: knav_qmss_queue: Fix PM disable depth imbalance in knav_queue_probe
firmware: ti_sci: Use devm_bitmap_zalloc when applicable
soc: ti: k3-ringacc: Allow the driver to be built as module
firmware: ti_sci: Fix polled mode during system suspend
firmware: ti_sci: Use the non-atomic bitmap API when applicable
firmware: ti_sci: Use the bitmap API to allocate bitmaps
drivers: soc: ti: knav_qmss_queue: Mark knav_acc_firmwares as static
Link: https://lore.kernel.org/r/20221122223856.fwackjg7fbd5jcz7@wannabe
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm driver updates for 6.2
The qcom,msm-id and qcom,board-id DeviceTree properties are documented,
to allow them to be used in configurations or devices requiring these
and the socinfo driver is updated to reuse the introduced identifiers.
The rpmh-rsc driver is extended to register for PM runtime notifications
from the CPU clusters, in order to submit sleep and wake votes the last
core in a cluster is being powered down.
A mechanism for keeping rpmhpd resources voted until sync_state is
introduced, this ensures that power-domains required during boot are
kept enabled. The rpmhpd power-domains for SDM670 are also added.
Support for the new QDU1000/QRU1000 platform is introduced in the rpmhpd
and socinfo drivers.
The APR driver gains missing error handling. QMI message descriptors in
the PDR driver are made const.
Support for the RPM found in SM6375 is added. The SPM driver gains
support for MSM8939 and MSM8976 platforms.
The stats and command-db drvers are marked as not having PM support.
* tag 'qcom-drivers-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (36 commits)
dt-bindings: firmware: scm: add sdm670 compatible
soc: qcom: rpmh-rsc: Write CONTROL_TCS with next timer wakeup
soc: qcom: rpmh-rsc: Save base address of drv
PM: domains: Store the next hrtimer wakeup in genpd
soc: qcom: rpmh-rsc: Attach RSC to cluster PM domain
dt-bindings: soc: qcom: Update devicetree binding document for rpmh-rsc
dt-bindings: soc: qcom: qcom,smd-rpm: Use qcom,smd-channels on MSM8976
soc: qcom: apr: Add check for idr_alloc and of_property_read_string_index
soc: qcom: socinfo: Add QDU1000/QRU1000 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for QDU1000/QRU1000
soc: qcom: rpmhpd: Add QDU1000/QRU1000 power domains
dt-bindings: power: rpmpd: Add QDU1000/QRU1000 to rpmpd binding
dt-bindings: qcom: smp2p: Add WPSS node names to pattern property
soc: qcom: spm: Implement support for SAWv2.3, MSM8976 L2 PM
dt-bindings: soc: qcom: spm: Add compatibles for MSM8976 L2
soc: qcom: llcc: make irq truly optional
soc: qcom: spm: Add MSM8939 SPM register data
dt-bindings: soc: qcom: spm: Add MSM8939 CPU compatible
dt-bindings: soc: qcom: aoss: Add sc8280xp compatible
dt-bindings: firmware: document Qualcomm SM6375 SCM
...
Link: https://lore.kernel.org/r/20221122202748.1854487-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
memory: tegra: Changes for v6.2-rc1
Some cleanups replace open-coded debugfs attributes and memory client
IDs are added for the DLA IP found on Tegra234 SoCs.
* tag 'tegra-for-6.2-memory-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra: Add DLA clients for Tegra234
memory: tegra186-emc: Use DEFINE_SHOW_ATTRIBUTE to simplify code
memory: tegra210-emc: Use DEFINE_SHOW_ATTRIBUTE to simplify code
memory: tegra30-emc: Use DEFINE_SHOW_ATTRIBUTE to simplify code
memory: tegra20-emc: Use DEFINE_SHOW_ATTRIBUTE to simplify code
dt-bindings: tegra: Update headers for Tegra234
dt-bindings: Add headers for NVDEC on Tegra234
Link: https://lore.kernel.org/r/20221121171239.2041835-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
clk: tegra: Changes for v6.2-rc1
Implements new ABI flags for certain clocks for which the parent rate
or clock state cannot be changed.
* tag 'tegra-for-6.2-clk-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
clk: tegra: Support BPMP-FW ABI deny flags
Link: https://lore.kernel.org/r/20221121171239.2041835-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
firmware: tegra: Changes for v6.2-rc1
This adds new BPMP ABI so that newer features can be enabled.
Furthermore, the BPMP driver is updated to use iosys-map helpers to
allow working with shared memory regions that are located in system
memory.
Apart from that, several minor cleanups are included.
* tag 'tegra-for-6.2-firmware-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Remove surplus dev_err() when using platform_get_irq_byname()
firmware: tegra: Update BPMP ABI
firmware: tegra: bpmp: Do not support big-endian
firmware: tegra: bpmp: Use iosys-map helpers
firmware: tegra: bpmp: Prefer u32 over uint32_t
Link: https://lore.kernel.org/r/20221121171239.2041835-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
soc/tegra: Changes for v6.2-rc1
In addition to a number of improvements and cleanups this contains a
fix for the FUSE access on newer chips, adds Tegra234 I/O pad support
and fixes various issues with wake events.
The SoC sysfs revision attribute is updated to include the platform
information so drivers can check for silicon vs. pre-silicon, among
other things.
* tag 'tegra-for-6.2-soc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: cbb: Remove redundant dev_err call
soc/tegra: cbb: Use DEFINE_SHOW_ATTRIBUTE to simplify tegra_cbb_err
firmware: tegra: include IVC header file only once
soc/tegra: cbb: Check firewall before enabling error reporting
soc/tegra: cbb: Add checks for potential out of bound errors
soc/tegra: cbb: Update slave maps for Tegra234
soc/tegra: cbb: Use correct master_id mask for CBB NOC in Tegra194
soc/tegra: fuse: Use platform info with SoC revision
soc/tegra: pmc: Process wake events during resume
soc/tegra: pmc: Fix dual edge triggered wakes
soc/tegra: pmc: Add I/O pad table for Tegra234
soc/tegra: fuse: Add nvmem keepout list
soc/tegra: fuse: Use SoC specific nvmem cells
soc/tegra: pmc: Select IRQ_DOMAIN_HIERARCHY
Link: https://lore.kernel.org/r/20221121171239.2041835-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
For previous MediaTek SoCs, such as MT8173, there are 2 display HW
pipelines binding to 1 mmsys with the same power domain, the same
clock driver and the same mediatek-drm driver.
For MT8195, VDOSYS0 and VDOSYS1 are 2 display HW pipelines binding to
2 different power domains, different clock drivers and different
mediatek-drm drivers.
Moreover, Hardware pipeline of VDOSYS0 has these components: COLOR,
CCORR, AAL, GAMMA, DITHER. They are related to the PQ (Picture Quality)
and they makes VDOSYS0 supports PQ function while they are not
including in VDOSYS1.
Hardware pipeline of VDOSYS1 has the component ETHDR (HDR related
component). It makes VDOSYS1 supports the HDR function while it's not
including in VDOSYS0.
To summarize0:
Only VDOSYS0 can support PQ adjustment.
Only VDOSYS1 can support HDR adjustment.
Therefore, we need to separate these two different mmsys hardwares to
2 different compatibles for MT8195.
Fixes: 81c5a41d10 ("dt-bindings: arm: mediatek: mmsys: add mt8195 SoC binding")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220927152704.12018-2-jason-jh.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
i.MX drivers change for 6.2:
- Improve imx8m-blk-ctrl driver to allow deferred probe in case that
'bus' genpd is not yet ready.
- Add missing USB_1_PHY PD for i.MX scu-pd firmware driver.
- Add GENPD_FLAG_ACTIVE_WAKEUP flag for i.MX8MM/N in GPCv2 driver, so
that the power domain remains on if USB remote wakeup is enabled.
* tag 'imx-drivers-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: gpcv2: add GENPD_FLAG_ACTIVE_WAKEUP flag for usb of imx8mm/n
firmware: imx: scu-pd: add missed USB_1_PHY pd
soc: imx: imx8m-blk-ctrl: Defer probe if 'bus' genpd is not yet ready
Link: https://lore.kernel.org/r/20221119125733.32719-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas driver updates for v6.2 (take two)
- Add support for identifying the SoC revision on RZ/V2M.
* tag 'renesas-drivers-for-v6.2-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: Identify RZ/V2M SoC
Link: https://lore.kernel.org/r/cover.1668788925.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the memory clients on Tegra234 which are needed for initialising the
SMMU for the Deep Learning Accelerator (DLA).
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. No
functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. No
functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. No
functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. No
functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Update the device-tree clock, memory, power and reset headers for
Tegra234 by adding the definitions for all the various devices.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Support BPMP_CLK_STATE_CHANGE_DENIED by not populating state changing
operations when the flag is set.
Support BPMP_CLK_RATE_PARENT_CHANGE_DENIED by not populating rate or
parent changing operations when the flag is set.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
There is no need to call the dev_err() function directly to print a
custom message when handling an error from either the platform_get_irq()
or platform_get_irq_byname() functions as both are going to display an
appropriate error message in case of a failure.
./drivers/firmware/tegra/bpmp-tegra210.c:204:2-9: line 204 is redundant
because platform_get_irq() already prints an error
./drivers/firmware/tegra/bpmp-tegra210.c:216:2-9: line 216 is redundant
because platform_get_irq() already prints an error
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2579
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. No
functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the necessary definition to prevent compilation
errors from the ivc.h file being included multiple times.
This does not currently cause any compilation issues,
but fix this anyway.
Signed-off-by: Manish Bhardwaj <mbhardwaj@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The global utilities block controls PCIE device enabling, alternate
function selection for multiplexed signals, consistency of HDA, USB
and PCIE, configuration of memory controller, rtc controller, lio
controller, and clock control.
This patch adds a driver to manage and access global utilities block
for LoongArch architecture Loongson-2 SoCs. Initially only reading SVR
and registering soc device are supported. Other guts accesses, such
as reading firmware configuration by default, should eventually be
added into this driver as well.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas driver updates for v6.2
- Let SOC_RENESAS select GPIOLIB and PINCTRL, so this does not have to
be handled in two (soon three: arm/arm64/riscv), places.
* tag 'renesas-drivers-for-v6.2-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: Kconfig: Explicitly select GPIOLIB and PINCTRL config under SOC_RENESAS
Link: https://lore.kernel.org/r/cover.1667558747.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
To enable error reporting for a fabric to CCPLEX, we need to write its
register for enabling error interrupt to CCPLEX during boot and later
clear the error status register after error occurs. If a fabric's
registers are protected and not accessible from CCPLEX, then accessing
the registers will cause CBB firewall error.
Add support to check whether write access from CCPLEX to the registers
of a fabric is not blocked by it's firewall before enabling error
reporting to CCPLEX for that fabric.
Fixes: fc2f151d23 ("soc/tegra: cbb: Add driver for Tegra234 CBB 2.0")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Added checks to avoid potential out of bounds errors which can happen if
the 'slave map' and 'CBB errors' arrays are not correct or latest where
some entries are missing.
Fixes: fc2f151d23 ("soc/tegra: cbb: Add driver for Tegra234 CBB 2.0")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Updating the slave map for fabrics and using the same maps for DCE, RCE
and SCE as they all are a replica in Tegra234.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In Tegra194 SoC, master_id bit range is different between cluster NOC
and CBB NOC. Currently same bit range is used which results in wrong
master_id value. Due to this, illegal accesses from the CCPLEX master
do not result in a crash as expected. Fix this by using the correct
range for the CBB NOC.
Finally, it is only necessary to extract the master_id when the
erd_mask_inband_err flag is set because when this is not set, a crash
is always triggered.
Fixes: b713442214 ("soc/tegra: cbb: Add CBB 1.0 driver for Tegra194")
Fixes: fc2f151d23 ("soc/tegra: cbb: Add driver for Tegra234 CBB 2.0")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
