The eDP link rate reported by the DP_MAX_LINK_RATE dpcd register (0xa) is
contradictory to the highest rate supported reported by
EDID (0xc = LINK_RATE_RBR2). The effects of this compounded with commit
'4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")' results
in no display modes being found and a dark panel.
For now, simply force the maximum supported link rate for the eDP attached
2018 15" Apple Retina panels.
Additionally, we must also check the firmware revision since the device ID
reported by the DPCD is identical to that of the more capable 16,1,
incorrectly quirking it. We also use said firmware check to quirk the
refreshed 15,1 models with Vega graphics as they use a slightly newer
firmware version.
Tested-by: Aun-Ali Zaidi <admin@kodeit.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Aun-Ali Zaidi <admin@kodeit.net>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- DC refactor and bug fixes for DP links
- Bug fixes for DP2
- Fix regressions causing display not light up
- Improved debug trace
- Improved DP AUX transfer
- Updated watermark latencies to fix underflows in some modes
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Isolate the way to obtain link_hwss from the actual implemenation of
link_hwss. So the caller can call link_hwss without knowing the
implementation detail of link_hwss.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Clean up dc_link_hwss file in the preparation of breaking it down to
file for each encoder type. We temporarly move the original dp link
functions in link_hwss back to dc_link_dp. We will break dc_link_dp down
after link_hwss is in good shape.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[how]
1. move decide det link training link resource before each link training.
2. move disable link for handling vbios case into set all streams
dpms off for link sequence.
3. extract usbc hotplug workaround into its own wa function.
4. Minor syntax changes to improve code readability.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The original latencies were causing underflow in some modes.
Resolution: 2880x1620@60p when HDR enable
[How]
1. Replace with the up-to-date watermark values based on new measurments
2. Correct the ddr_wm_table name to DDR5 on DCN31
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Certain configurations will result in link encoder
to not be assigned to the link at the time we apply
cable ID logic. We should skip it in those cases.
[How]
Check if link_enc is not null before applying
cable ID.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A lot of below message are outputed in SRIOV case.
amdgpu: indirect registers access through rlcg is not supported
Also drop redundant ret set, as it's initialized to be false already.
Fixes: 29dbcac82f ("drm/amdgpu: add helper to query rlcg reg access flag")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. The infinite loop causing soft lock occurs on multiple amdgpu cards
supporting ras feature.
2. This a workaround patch to fix 6492e1b07c.
It is valid for multiple amdgpu cards of the same type.
3. The root cause is that each GPU card device has a separate .ras_list
link header, but the instance and linked list node of each ras block
are unique. When each device is initialized, each ras instance will
repeatedly add link node to the device every time. In this way, only
the .ras_list of the last initialized device is completely correct.
the .ras_list->prev and .ras_list->next of the device initialzied
before can still point to the correct ras instance, but the prev
pointer and next pointer of the pointed ras instance both point to
the last initialized device's .ras_ list instead of the beginning
.ras_ list. When using list_for_each_entry_safe searches for
non-existent Ras nodes on devices other than the last device, the
last ras instance next pointer cannot always be equal to the
beginning .ras_list, so that the loop cannot be terminated, the
program enters a infinite loop.
BTW: Since the data and initialization process of each card are the same,
the link list between ras instances will not be destroyed every time
the device is initialized.
4. The soft locked logs are as follows:
[ 262.165690] CPU: 93 PID: 758 Comm: kworker/93:1 Tainted: G OE 5.13.0-27-generic #29~20.04.1-Ubuntu
[ 262.165695] Hardware name: Supermicro AS -4124GS-TNR/H12DSG-O-CPU, BIOS T20200717143848 07/17/2020
[ 262.165698] Workqueue: events amdgpu_ras_do_recovery [amdgpu]
[ 262.165980] RIP: 0010:amdgpu_ras_get_ras_block+0x86/0xd0 [amdgpu]
[ 262.166239] Code: 68 d8 4c 8d 71 d8 48 39 c3 74 54 49 8b 45 38 48 85 c0 74 32 44 89 fa 44 89 e6 4c 89 ef e8 82 e4 9b dc 85 c0 74 3c 49 8b 46 28 <49> 8d 56 28 4d 89 f5 48 83 e8 28 48 39 d3 74 25 49 89 c6 49 8b 45
[ 262.166243] RSP: 0018:ffffac908fa87d80 EFLAGS: 00000202
[ 262.166247] RAX: ffffffffc1394248 RBX: ffff91e4ab8d6e20 RCX: ffffffffc1394248
[ 262.166249] RDX: ffff91e4aa356e20 RSI: 000000000000000e RDI: ffff91e4ab8c0000
[ 262.166252] RBP: ffffac908fa87da8 R08: 0000000000000007 R09: 0000000000000001
[ 262.166254] R10: ffff91e4930b64ec R11: 0000000000000000 R12: 000000000000000e
[ 262.166256] R13: ffff91e4aa356df8 R14: ffffffffc1394320 R15: 0000000000000003
[ 262.166258] FS: 0000000000000000(0000) GS:ffff92238fb40000(0000) knlGS:0000000000000000
[ 262.166261] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 262.166264] CR2: 00000001004865d0 CR3: 000000406d796000 CR4: 0000000000350ee0
[ 262.166267] Call Trace:
[ 262.166272] amdgpu_ras_do_recovery+0x130/0x290 [amdgpu]
[ 262.166529] ? psi_task_switch+0xd2/0x250
[ 262.166537] ? __switch_to+0x11d/0x460
[ 262.166542] ? __switch_to_asm+0x36/0x70
[ 262.166549] process_one_work+0x220/0x3c0
[ 262.166556] worker_thread+0x4d/0x3f0
[ 262.166560] ? process_one_work+0x3c0/0x3c0
[ 262.166563] kthread+0x12b/0x150
[ 262.166568] ? set_kthread_struct+0x40/0x40
[ 262.166571] ret_from_fork+0x22/0x30
Fixes: 6492e1b07c ("drm/amdgpu: Unify ras block interface for each ras block")
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is underflow / visual corruption DCN301, for high
bandwidth MST DSC configurations such as 2x1440p144 or 2x4k60.
[How]
Use up-to-date watermark values for DCN301.
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All warnings (new ones prefixed by >>):
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c: In function
'svm_range_deferred_list_work':
>> drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:2067:22: warning:
variable 'p' set but not used [-Wunused-but-set-variable]
2067 | struct kfd_process *p;
|
Fixes: 367c9b0f1b ("drm/amdkfd: Ensure mm remain valid in svm deferred_list work")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-By: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We observed a GPU hang when querying GMC CG state(i.e.,
cat amdgpu_pm_info) on cyan skillfish. Acctually, cyan
skillfish doesn't support any CG features.
Just prevent it from accessing GMC CG registers.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will cause misconfigured systems to not run the GPU suspend
routines.
* In APUs that are properly configured system will go into s2idle.
* In APUs that are intended to be S3 but user selects
s2idle the GPU will stay fully powered for the suspend.
* In APUs that are intended to be s2idle and system misconfigured
the GPU will stay fully powered for the suspend.
* In systems that are intended to be s2idle, but AMD dGPU is also
present, the dGPU will go through S3
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will be used to help make decisions on what to do in
misconfigured systems.
v2: squash in semicolon fix from Stephen Rothwell
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On some OEM setups users can configure the BIOS for S3 or S2idle.
When configured to S3 users can still choose 's2idle' in the kernel by
using `/sys/power/mem_sleep`. Before commit 6dc8265f98 ("drm/amdgpu:
always reset the asic in suspend (v2)"), the GPU would crash. Now when
configured this way, the system should resume but will use more power.
As such, adjust the `amdpu_acpi_is_s0ix function` to warn users about
potential power consumption issues during their first attempt at
suspending.
Reported-by: Bjoren Dasse <bjoern.daase@gmail.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1824
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wrong order for config and counter_id parameters was passed, when calling df_v3_6_pmc_set_deferred and df_v3_6_pmc_is_deferred functions.
Signed-off-by: huangqu <jinsdb@126.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a new CTX ioctl operation to set stable pstates for profiling.
When creating traces for tools like RGP or using SPM or doing
performance profiling, it's required to enable a special
stable profiling power state on the GPU. These profiling
states set fixed clocks and disable certain other power
features like powergating which may impact the results.
Historically, these profiling pstates were enabled via sysfs,
but this adds an interface to enable it via the CTX ioctl
from the application. Since the power state is global
only one application can set it at a time, so if multiple
applications try and use it only the first will get it,
the ioctl will return -EBUSY for others. The sysfs interface
will override whatever has been set by this interface.
Mesa MR: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/207
v2: don't default r = 0;
v3: rebase on Evan's PM cleanup
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return an error if someone tries to use the i2c bus when the
SMU is not running. Otherwise we can end up sending commands
to the SMU which will either get ignored or could cause other
issues depending on what state the GPU and SMU are in.
Cc: Luben.Tuikov@amd.com
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose both SMU I2C buses. Some boards use the same bus for both the RAS
and FRU EEPROMs and others use different buses. This enables the
additional I2C bus and sets the right buses to use for RAS and FRU EEPROM
access.
Cc: Roy Sun <Roy.Sun@amd.com>
Co-developed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On ALDEBARAN, we need to traverse all column bits higher than
BIT11(C4C3C2) in a row, the shift of R14 bit should be also taken
into account. Retire all pages we find.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
One piece of umc normalizing address can be mapped to 16 pieces of
physical address in each umc channel on ALDEBARAN.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create common amdgpu_umc_fill_error_record function for all versions
of UMC and clean up related codes.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A number of BIOS versions have a problem with the watermarks table not
being configured properly. This manifests as a very scary looking warning
during resume from s0i3. This should be harmless in most cases and is well
understood, so decrease the assertion to a clearer warning about the problem.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GPUs with RAS, poison can propagate between processes if VRAM is not
cleared when it is freed or allocated. The reason is, that not all write
accesses clear RAS poison. 32-byte writes by the SDMA engine do clear RAS
poison. Clearing memory in the background when it is freed should avoid
major performance impact. KFD has been doing this already for a long time.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In rmmod procedure, kfd sends cp a dequeue request, but the
request does not get response, then an error message "cp
queue pipe 4 queue 0 preemption failed" printed.
[how]
Performing kfd suspending after disabling gfxoff can fix it.
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
