The change adds description of Qualcomm crypto engine controller and
BAM associated with it. The change is inspired by commit 3e482859f1
("dts: qcom: sdm845: Add dt entries to support crypto engine.")
While performance of cryptographic algorithms executed on QCE is lower
than e.g. ones tinkered for ARM NEON, the offloaded execution would
make sense:
# cryptsetup benchmark | grep aes
aes-cbc 128b 71.0 MiB/s 71.9 MiB/s
aes-cbc 256b 62.4 MiB/s 62.4 MiB/s
aes-xts 256b 70.7 MiB/s 70.8 MiB/s
aes-xts 512b 62.0 MiB/s 63.3 MiB/s
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211011094822.1580122-1-vladimir.zapolskiy@linaro.org
The driver now sets an appropriate default for WLED4 (and WLED5) just
like WLED3 making this linear array from 0-3 redundant. In addition the
driver is now able to parse arrays of variable length solving the "all
four strings *have to* be defined" comment.
Besides the driver will now warn when both properties are specified to
prevent ambiguity: the length of the array is enough to imply a set
number of strings.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007213400.258371-12-marijn.suijten@somainline.org
IPQ8074 PCIe PHY nodes are broken in the many ways:
- '#address-cells', '#size-cells' and 'ranges' are missing.
- Child phy/lane node is missing, and the child properties like
'#phy-cells' and 'clocks' are mistakenly put into parent node.
- The clocks properties for parent node are missing.
Fix them to get the nodes comply with the bindings schema.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-9-shawn.guo@linaro.org
'vdda-phy-supply' and 'vdda-pll-supply' are required properties. Add
them to fix the dtbs_check warnings below.
phy@1da7000: 'vdda-phy-supply' is a required property
arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml
phy@1da7000: 'vdda-pll-supply' is a required property
arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-8-shawn.guo@linaro.org
The 'reg-names' is not a supported/used property. Drop it from QMP PHY
nodes to fix dtbs_check warnings like below.
phy-wrapper@88e9000: 'reg-names' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/sm8350-hdk.dt.yaml
arch/arm64/boot/dts/qcom/sm8350-mtp.dt.yaml
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-7-shawn.guo@linaro.org
Many child nodes of QMP PHY are named without following bindings schema
and causing dtbs_check warnings like below.
phy@1c06000: 'lane@1c06800' does not match any of the regexes: '^phy@[0-9a-f]+$'
arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dt.yaml
Correct them to fix the warnings.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-5-shawn.guo@linaro.org
The RTC on the pmk8350 is not useful on all boards. Some boards may
not provide backup power to the PMIC but might have another RTC on the
board that does have backup power. In this case it's better to not use
the RTC on the PMIC.
At the moment, the only boards that includes this PMIC are sc7280-idp
and sc7280-idp2. On sc7280-idp I'm not aware of any other RTCs, but
sc7280-idp2 has a Chrome OS EC on it and this is intended to provide
the RTC for the AP.
Let's do what we normally do for hardware that's not used by all
boards and set it to a default status of "disabled" and then enable it
on the boards that need it.
NOTE: for sc7280-idp it's _possible_ we might also want to add
`allow-set-time;`. That could be the subject of a future patch if it
is indeed true.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Satya Priya <skakit@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
[bjorn: Enable the RTC on the MTP as well]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929153553.1.Ib44c2ac967833d7a3f51452d44d15b7b8d23c1f0@changeid
After adding all necessary support for MSM8916 SMP/cpuidle without PSCI
on ARM32, build the Samsung Galaxy S4 Mini VE device tree from the arm64
tree together with the ARM32 include to allow booting this device on ARM32.
The approach to include device tree files from other architectures is
inspired from e.g. the Raspberry Pi (bcm2711-rpi-4-b.dts) where this is
used to build the device tree for both ARM32 and ARM64.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004204955.21077-15-stephan@gerhold.net
Add the device tree nodes necessary for SMP bring-up and cpuidle
without PSCI on ARM32. The hardware is typically controlled by the
PSCI implementation in the TrustZone firmware and is therefore marked
as status = "reserved" by default (from the device tree specification):
"Indicates that the device is operational, but should not be used.
Typically this is used for devices that are controlled by another
software component, such as platform firmware."
Since this is part of the MSM8916 SoC it should be added to msm8916.dtsi
but in practice these nodes should only get enabled via an extra include
on ARM32.
This is necessary for some devices with signed firmware which is missing
both ARM64 and PSCI support and can therefore only boot ARM32 kernels.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004204955.21077-13-stephan@gerhold.net
The LTE version of the S4 Mini VE has a NXP PN547, which is supported
by the nxp-nci-i2c driver in mainline. It seems to detect NFC tags
using "nfctool" just fine, although more testing is difficult given
there seem to be very few useful applications making use of the
Linux NFC subsystem. :(
Note that for some reason Samsung decided to connect the I2C pins
to GPIOs where no hardware I2C bus is available, so we need to
fall back to software bit-banging with i2c-gpio.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004201921.18526-7-stephan@gerhold.net
Like the Samsung Galaxy A3/A5, the S4 Mini VE uses a Richtek RT5033 PMIC
as battery fuel gauge, charger, flash LED and for some regulators.
For now, only add the fuel gauge/battery device to the device tree,
so we can check the remaining battery percentage.
The other RT5033 drivers need some more work first before
they can be used properly.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004201921.18526-6-stephan@gerhold.net
The Samsung Galaxy S4 Mini Value Edition is an updated version of the
original S4 Mini based on MSM8916. It is similar to the other Samsung
devices based on MSM8916 with only a few minor differences.
The device tree contains initial support for the S4 Mini Value Edition with:
- UART
- eMMC/SD card (needs quirk for some reason)
- Buttons
- Vibrator
- WiFi/Bluetooth (WCNSS)
- USB
Unfortunately, the S4 Mini VE was released with outdated 32-bit only
firmware and never received any update from Samsung. Since the 32-bit
TrustZone firmware is signed there seems to be no way currently to
actually boot this device tree on arm64 Linux at the moment. :(
However, it is possible to use this device tree by compiling an ARM32 kernel
instead. The device tree can be easily built on ARM32 with an #include
and it works really well there. To avoid confusion for others it is still
better to add this device tree on arm64. Otherwise it's easy to forget
to update this one when making some changes that affect all MSM8916 devices.
Maybe someone finds a way to boot ARM64 Linux on this device at some point.
In this case I expect that this device tree can be simply used as-is.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004201921.18526-2-stephan@gerhold.net
Add device tree for the Fairphone 4 smartphone which is based on
Snapdragon 750G (sm7225) which is basically sm6350.
Currently supported are UART, physical buttons (power & volume), screen
(based on simple-framebuffer set up by the bootloader), regulators and
USB.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007212444.328034-12-luca@z3ntu.xyz
