The stimulus base for STM device must be listed as the second memory
resource, followed by the programming base address as described in
"Section 2.3 Resources" in ACPI for CoreSightTM 1.0 Platform Design
documen (DEN0067).
Add support for parsing the information for ACPI.
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
So far we have reused the name of the "platform" device for
the CoreSight device. But this is not very intuitive when
we move to ACPI. Also, the ACPI device names have ":" in them
(e.g, ARMHC97C:01), which the perf tool doesn't like very much.
This patch introduces a generic naming scheme, givin more intuitive
names for the devices that appear on the CoreSight bus.
The names follow the pattern "prefix" followed by "index" (e.g, etm5).
We maintain a list of allocated devices per "prefix" to make sure
we don't allocate a new name when it is reprobed (e.g, due to
unsatisifed device dependencies). So, we maintain the list
of "fwnodes" of the parent devices to allocate a consistent name.
All devices except the ETMs get an index allocated in the order
of probing. ETMs get an index based on the CPU they are attached to.
TMC devices are named using "tmc_etf", "tmc_etb", and "tmc_etr"
prefixes depending on the configuration of the device.
The replicators and funnels are not classified as dynamic/static
anymore. One could easily figure that out by checking the presence
of "mgmt" registers under sysfs.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We rely on the device names to find a CoreSight device on the
coresight bus. The device name however is obtained from the platform,
which is bound to the real platform/amba device. As we are about
to use different naming scheme for the coresight devices, we can't
rely on the platform device name to find the corresponding
coresight device. Instead we use the platform agnostic
"fwnode handle" of the parent device to find the devices.
We also reuse the same fwnode as the parent for the Coresight
device we create.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We match of_node while searching for a device. Make this
more generic in preparation for the ACPI support by using
fwnode_handle.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a helper to clean up the platform specific data provided
by the firmware. This will be later used for dropping the necessary
references when we switch to the fwnode handles for tracking
connections.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are about to introduce methods to clean up the platform data
as we switch to tracking the device reference from "name" to "fwnode
handles" for device connections. This requires us to drop the fwnode
handle references when the data is no longer required - i.e, when
the device probe fails or the device gets unregistered.
In order to consolidate the invocation of the cleanup, we delay the
platform probing to the very last minute, possibly before invoking
the coresight_register. Then, we leave the coresight core code to
do the clean up. i.e, if the coresight_register fails, it takes
care of freeing the data. Otherwise, coresight_unregister will
do the necessary operations.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The platform specific information describes the connections and
the ports of a given coresigh device. This information is also
recorded in the coresight device as separate fields. Let us reuse
the original platform description to streamline the handling
of the data.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a device is unregistered, we remove all connection
references to it, by searching the connection records of
all devices in the coresight bus, via coresight_remove_conns.
We could avoid searching if this device doesn't have an input
port (e.g, a source). Also document the purpose of the function.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are about to use a name independent of the parent AMBA device
name. As such, there is no need to have it in the platform description.
Let us move this to coresight description instead.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CPU field is only used by ETMs and there is a separate API
for fetching the same. So, let us use that instead of using
the common platform probing helper. Also, remove it from the
platform_data.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CoreSight components ETM and CPU-Debug are always associated
with CPUs. Replace the of_coresight_get_cpu() with a platform
agnostic helper, in preparation to add ACPI support.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
So far we have hard coded the DT platform parsing code in
every driver. Introduce generic helper to parse the information
provided by the firmware in a platform agnostic manner, in preparation
for the ACPI support.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As we prepare to add support for ACPI bindings, let us make sure we do
the compatible check only if we are sure we are dealing with a DT based
system.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the of_coresight_alloc_memory() => coresight_alloc_conns()
as it is independent of the underlying firmware type. This is in
preparation for the ACPI support.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the firmware handling file to a more generic
name, in preparation for adding ACPI support. Right now
we only support DT and we have all the platform handling
code in of_coresight.c. Let us rename the file to
coresight-platform.c in order to keep the platform handling
in a single place for DT and the upcoming ACPI support.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Keep track of the STM coresight device which is a child device
of the AMBA device. Since we can get to the coresight_device
from the "device" instance, remove the explicit field.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation to use a consistent device naming scheme,
clean up the device link tracking in replicator driver.
Use the "coresight" device instead of the "real" parent device
for all internal purposes. All other requests (e.g, power management,
DMA operations) must use the "real" device which is the parent device.
Since the CATU driver also uses the TMC-SG infrastructure, update
the callers to ensure they pass the appropriate device argument
for the tables.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation to use a consistent device naming scheme,
clean up the device link tracking in replicator driver.
Use the "coresight" device instead of the "real" parent device
for all internal purposes. All other requests (e.g, power management,
DMA operations) must use the "real" device which is the parent device.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation to use a consistent device naming scheme,
clean up the device link tracking in funnel driver.
Use the "coresight" device instead of the "real" parent device
for all internal purposes. All other requests (e.g, power management,
DMA operations) must use the "real" device which is the parent device.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch avoids setting the truncated flag when operating in snapshot
mode since the trace buffer is expected to be truncated and discontinuous
from one snapshot to another. Moreover when the truncated flag is set
the perf core stops enabling the event, waiting for user space to consume
the data. In snapshot mode this is clearly not what we want since it
results in stale data.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When working in snapshot mode function perf_aux_output_begin()
does not set the handle->size because the size is expected to be
deduced by the placement of the "head" and "old" pointers in user
space. As such there is no point in trying to adjust the amount
of data to copy to the ring buffer.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unify amongst sink drivers how the AUX ring buffer head is communicated
to user space. That way the same algorithm in user space can be used to
determine where the latest data is and how much of it to access.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unify amongst sink drivers how the AUX ring buffer head is communicated
to user space. That way the same algorithm in user space can be used to
determine where the latest data is and how much of it to access.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unify amongst sink drivers how the AUX ring buffer head is communicated
to user space. That way the same algorithm in user space can be used to
determine where the latest data is and how much of it to access.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch corrects the SPDX License Identifier style
in header file related to Drivers for FRU Support Interface.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Allwinner SoCs have an efuse supported in Linux, with a matching Device
Tree binding.
Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SNVS LPGR IP block is also found on other i.MX SoCs that
are not covered by the current SOC_IMX6 || SOC_IMX7D logic.
One example is the i.MX7ULP.
To avoid keep expanding the SoC logic selection, make it broader
by using the more generic ARCH_MXC symbol instead.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I'm moving on to a new position and stepping down as FPGA subsystem
maintainer. Moritz has graciously agreed to take over the
maintainership.
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kerneldoc comments in drivers/slimbus/stream.c were not properly
formatted, leading to a distinctly unsatisfying "no structured comments
found" warning in the docs build. Sprinkle some asterisks around so that
the comments will be properly recognized.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull ceph fixes from Ilya Dryomov:
"A change to call iput() asynchronously to avoid a possible deadlock
when iput_final() needs to wait for in-flight I/O (e.g. readahead) and
a fixup for a cleanup that went into -rc1"
* tag 'ceph-for-5.2-rc4' of git://github.com/ceph/ceph-client:
ceph: fix error handling in ceph_get_caps()
ceph: avoid iput_final() while holding mutex or in dispatch thread
ceph: single workqueue for inode related works
Pull xen fix from Juergen Gross:
"Just one fix for the Xen block frontend driver avoiding allocations
with order > 0"
* tag 'for-linus-5.2b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-blkfront: switch kcalloc to kvcalloc for large array allocation
Pull s390 fixes from Heiko Carstens:
- fix stack unwinder: the stack unwinder rework has on off-by-one bug
which prevents following stack backchains over more than one context
(e.g. irq -> process).
- fix address space detection in exception handler: if user space
switches to access register mode, which is not supported anymore, the
exception handler may resolve to the wrong address space.
* tag 's390-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/unwind: correct stack switching during unwind
s390/mm: fix address space detection in exception handling
Pull MIPS fixes from Paul Burton:
- Declare ginvt() __always_inline due to its use of an argument as an
inline asm immediate.
- A VDSO build fix following Kbuild changes made this cycle.
- A fix for boot failures on txx9 systems following memory
initialization changes made this cycle.
- Bounds check virt_addr_valid() to prevent it spuriously indicating
that bogus addresses are valid, in turn fixing hardened usercopy
failures that have been present since v4.12.
- Build uImage.gz for pistachio systems by default, since this is the
image we need in order to actually boot on a board.
- Remove an unused variable in our uprobes code.
* tag 'mips_fixes_5.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: uprobes: remove set but not used variable 'epc'
MIPS: pistachio: Build uImage.gz by default
MIPS: Make virt_addr_valid() return bool
MIPS: Bounds check virt_addr_valid
MIPS: TXx9: Fix boot crash in free_initmem()
MIPS: remove a space after -I to cope with header search paths for VDSO
MIPS: mark ginvt() as __always_inline
