The vfprintf test case require to open a temporary file to write, the
old memfd_create() method is perfect but has strong dependency on
MEMFD_CREATE and also TMPFS or HUGETLBFS (see fs/Kconfig):
config MEMFD_CREATE
def_bool TMPFS || HUGETLBFS
And from v6.2, MFD_NOEXEC_SEAL must be passed for the non-executable
memfd, otherwise, The kernel warning will be output to the test result
like this:
Running test 'vfprintf'
0 emptymemfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=1 'init'
"" = "" [OK]
To avoid such warning and also to remove the MEMFD_CREATE dependency,
let's open a file from tmpfs directly.
The /tmp directory is used to detect the existing of tmpfs, if not
there, skip instead of fail.
And further, for pid == 1, the initramfs is loaded as ramfs, which can
be used as tmpfs, so, it is able to further remove TMPFS dependency too.
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/9ad51430-b7c0-47dc-80af-20c86539498d@t-8ch.de
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
For CONFIG_PROC_FS=n, the /proc is not mountable, but the /proc
directory has been created in the prepare() stage whenever /proc is
there or not.
so, the checking of /proc in the run_syscall() stage will be always true
and at last it will fail all of the procfs dependent test cases, which
deviates from the 'cond' check design of the EXPECT_xx macros, without
procfs, these test cases should be skipped instead of failed.
To solve this issue, one method is checking /proc/self instead of /proc,
another method is removing the /proc directory completely for
CONFIG_PROC_FS=n, we apply the second method to avoid misleading the
users.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
A new rmdir_blah test case is added to remove a non-existing /blah,
which expects failure with ENOENT errno.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
a reverse operation of mkdir() is meaningful, add rmdir() here.
required by nolibc-test to remove /proc while CONFIG_PROC_FS is not
enabled.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
For CONFIG_NET=n, there would be no /proc/self/net, so, use
/proc/self/cmdline instead.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
kernel parameters allow pass two types of strings, one type is like
'noapic', another type is like 'panic=5', the first type is passed as
arguments of the init program, the second type is passed as environment
variables of the init program.
when users pass kernel parameters like this:
noapic NOLIBC_TEST=syscall
our nolibc-test program will use the test setting from argv[1] and
ignore the one from NOLIBC_TEST environment variable, and at last, it
will print the following line and ignore the whole test setting.
Ignoring unknown test name 'noapic'
reversing the parsing order does solve the above issue:
test = getenv("NOLIBC_TEST");
if (test)
test = argv[1];
but it still doesn't work with such kernel parameters (without
NOLIBC_TEST environment variable):
noapic FOO=bar
To support all of the potential kernel parameters, let's verify the test
setting from both of argv[1] and NOLIBC_TEST environment variable.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Since both glibc and musl provide RB_ flags via <sys/reboot.h>, and we
just add RB_ flags for nolibc, let's use RB_ flags instead of
LINUX_REBOOT_ flags and only reserve the required <sys/reboot.h> header.
This allows compile libc-test for musl libc without the linux headers.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Both glibc and musl provide RB_ flags via <sys/reboot.h> for reboot(),
they don't need to include <linux/reboot.h>, let nolibc provide RB_
flags too.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
_GNU_SOURCE Implies _LARGEFILE64_SOURCE in glibc, but in musl, the
default configuration doesn't enable _LARGEFILE64_SOURCE.
>From include/dirent.h of musl, getdents64 is provided as getdents when
_LARGEFILE64_SOURCE is defined.
#if defined(_LARGEFILE64_SOURCE)
...
#define getdents64 getdents
#endif
Let's define _LARGEFILE64_SOURCE to fix up this compile error:
tools/testing/selftests/nolibc/nolibc-test.c: In function ‘test_getdents64’:
tools/testing/selftests/nolibc/nolibc-test.c:453:8: warning: implicit declaration of function ‘getdents64’; did you mean ‘getdents’? [-Wimplicit-function-declaration]
453 | ret = getdents64(fd, (void *)buffer, sizeof(buffer));
| ^~~~~~~~~~
| getdents
/usr/bin/ld: /tmp/ccKILm5u.o: in function `test_getdents64':
nolibc-test.c:(.text+0xe3e): undefined reference to `getdents64'
collect2: error: ld returned 1 exit status
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
mmap() a file with a good offset and then munmap() it. a non-zero offset
is passed to test the 6th argument of my_syscall6().
Note, it is not easy to find a unique file for mmap() in different
scenes, so, a file list is used to search the right one:
- /dev/zero: is commonly used to allocate anonymous memory and is likely
present and readable
- /proc/1/exe: for 'run' and 'run-user' target, 'run-user' can not find
'/proc/self/exe'
- /proc/self/exe: for 'libc-test' target, normal program 'libc-test' has
no permission to access '/proc/1/exe'
- argv0: the path of the program itself, let it pass even with worst
case scene: no procfs and no /dev/zero
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/20230702193306.GK16233@1wt.eu/
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/bff82ea6-610b-4471-a28b-6c76c28604a6@t-8ch.de/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The addr argument of munmap() must be a multiple of the page size,
passing invalid (void *)1 addr expects failure with -EINVAL.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The length argument of mmap() must be greater than 0, passing a zero
length argument expects failure with -EINVAL.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
>From musl 0.9.14 (to the latest version 1.2.3), both sbrk() and brk()
have almost been disabled for they conflict with malloc, only sbrk(0) is
still permitted as a way to get the current location of the program
break, let's support such case.
EXPECT_PTRNE() is used to expect sbrk() always successfully getting the
current break.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The syscalls like sbrk() and mmap() return pointers, to test them, more
pointer compare test macros are required, add them:
- EXPECT_PTREQ() expects two equal pointers.
- EXPECT_PTRNE() expects two non-equal pointers.
- EXPECT_PTRER() expects failure with a specified errno.
- EXPECT_PTRER2() expects failure with one of two specified errnos.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
argv0 is the path to nolibc-test program itself, which is a very good
always existing readable file for some tests, let's export it.
Note, the path may be absolute or relative, please make sure the tests
work with both of them. If it is relative, we must make sure the current
path is the one specified by the PWD environment variable.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/ZKKbS3cwKcHgnGwu@1wt.eu/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Fix up the error reported by scripts/checkpatch.pl:
ERROR: do not use assignment in if condition
#95: FILE: tools/include/nolibc/sys.h:95:
+ if ((ret = sys_brk(0)) && (sys_brk(ret + inc) == ret + inc))
Apply the new generic __sysret() to merge the SET_ERRNO() and return
lines.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Do several cleanups together:
- Since all supported architectures have my_syscall6() now, remove the
#ifdef check.
- Move the mmap() related macros to tools/include/nolibc/types.h and
reuse most of them from <linux/mman.h>
- Apply the new generic __sysret() to convert the calling of sys_map()
to oneline code
Note, since MAP_FAILED is -1 on Linux, so we can use the generic
__sysret() which returns -1 upon error and still satisfy user land that
checks for MAP_FAILED.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/20230702192347.GJ16233@1wt.eu/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
It is able to pass the 6th argument like the 5th argument via the stack
for mips, let's add a new my_syscall6() now, see [1] for details:
The mips/o32 system call convention passes arguments 5 through 8 on
the user stack.
Both mmap() and pselect6() require my_syscall6().
[1]: https://man7.org/linux/man-pages/man2/syscall.2.html
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
my_syscall<N> share the same long clobber list, define a macro for them.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
my_syscall<N> share the same long clobber list, define a macro for them.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
replace "__asm__ volatile" with "__asm__ volatile" and insert necessary
whitespace before "\" to make sure the lines are aligned.
$ sed -i -e 's/__asm__ volatile ( /__asm__ volatile ( /g' tools/include/nolibc/*.h
Note, arch-s390.h uses post-tab instead of post-whitespaces, must avoid
insert whitespace just before the tabs:
$ sed -i -e 's/__asm__ volatile (\t/__asm__ volatile (\t/g' tools/include/nolibc/arch-*.h
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
More than 8 whitespaces of the code indent are replaced with "tab +
whitespaces" to fix up such errors reported by scripts/checkpatch.pl:
ERROR: code indent should use tabs where possible
#64: FILE: tools/include/nolibc/arch-mips.h:64:
+^I \$
ERROR: code indent should use tabs where possible
#72: FILE: tools/include/nolibc/arch-mips.h:72:
+^I "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \$
This command is used:
$ sed -i -e '/^\t* /{s/ /\t/g}' tools/include/nolibc/arch-*.h
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Since commit 53fcfafa8c ("tools/nolibc/unistd: add syscall()") nolibc
has support for syscall(2).
Use it to get rid of some ifdef-ery.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Use __sysret() to shrink most of the library routines to oneline code.
Removed 266 lines of duplicated code.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Use __sysret() to shrink the whole _syscall() to oneline code.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Compiling nolibc for rv32 got such errors:
nolibc/sysroot/riscv/include/sys.h: In function ‘sys_gettimeofday’:
nolibc/sysroot/riscv/include/sys.h:557:21: error: ‘__NR_gettimeofday’ undeclared (first use in this function); did you mean ‘sys_gettimeofday’?
557 | return my_syscall2(__NR_gettimeofday, tv, tz);
| ^~~~~~~~~~~~~~~~~
nolibc/sysroot/riscv/include/sys.h: In function ‘sys_lseek’:
nolibc/sysroot/riscv/include/sys.h:675:21: error: ‘__NR_lseek’ undeclared (first use in this function)
675 | return my_syscall3(__NR_lseek, fd, offset, whence);
| ^~~~~~~~~~
nolibc/sysroot/riscv/include/sys.h: In function ‘sys_wait4’:
nolibc/sysroot/riscv/include/sys.h:1341:21: error: ‘__NR_wait4’ undeclared (first use in this function)
1341 | return my_syscall4(__NR_wait4, pid, status, options, rusage);
If a syscall macro is not supported by a target platform, wrap it with
'#ifdef' and 'return -ENOSYS' for the '#else' branch, which lets the
other syscalls work as-is and allows developers to fix up the test
failures reported by nolibc-test one by one later.
This wraps all of the failed syscall macros with '#ifdef' and 'return
-ENOSYS' for the '#else' branch, so, all of the undeclared failures are
fixed.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-riscv/5e7d2adf-e96f-41ca-a4c6-5c87a25d4c9c@app.fastmail.com/
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Compiling nolibc for rv32 got such errors:
In file included from nolibc/sysroot/riscv/include/nolibc.h:99,
from nolibc/sysroot/riscv/include/errno.h:26,
from nolibc/sysroot/riscv/include/stdio.h:14,
from tools/testing/selftests/nolibc/nolibc-test.c:12:
nolibc/sysroot/riscv/include/sys.h:946:2: error: #error Neither __NR_ppoll nor __NR_poll defined, cannot implement sys_poll()
946 | #error Neither __NR_ppoll nor __NR_poll defined, cannot implement sys_poll()
| ^~~~~
nolibc/sysroot/riscv/include/sys.h:1062:2: error: #error None of __NR_select, __NR_pselect6, nor __NR__newselect defined, cannot implement sys_select()
1062 | #error None of __NR_select, __NR_pselect6, nor __NR__newselect defined, cannot implement sys_select()
If a syscall is not supported by a target platform, 'return -ENOSYS' is
better than '#error', which lets the other syscalls work as-is and
allows developers to fix up the test failures reported by nolibc-test
one by one later.
This converts all of the '#error' to 'return -ENOSYS', so, all of the
'#error' failures are fixed.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-riscv/5e7d2adf-e96f-41ca-a4c6-5c87a25d4c9c@app.fastmail.com/
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The commit fa0df56a80 ("selftests/nolibc: also count skipped and
failed tests in output") added counting for the skipped and failed
tests, but also removed the 'FAIL' results print, let's restore it for
it really allow users to learn the failed details without opening the
log file.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Even when there is no failure, developers may be still interested in the
test log file, especially, string alignment, duplicated print, kernel
message and so forth, so, always print the path to test log file.
A new line is added for such a print to avoid annoying people who don't
care about it when the test pass completely.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/ZIB792FtG6ibOudp@1wt.eu/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The run-user, run and rerun targets use the same test report script,
let's add a standalone test report macro for them.
This shrinks code lines and simplify the future maintainability.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/ZIB792FtG6ibOudp@1wt.eu/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
We just sorted the entries and fields last release, so just out of a
perverse sense of curiosity, I decided to see if we can keep things
ordered for even just one release.
The answer is "No. No we cannot".
I suggest that all kernel developers will need weekly training sessions,
involving a lot of Big Bird and Sesame Street. And at the yearly
maintainer summit, we will all sing the alphabet song together.
I doubt I will keep doing this. At some point "perverse sense of
curiosity" turns into just a cold dark place filled with sadness and
despair.
Repeats: 80e62bc848 ("MAINTAINERS: re-sort all entries and fields")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull dma-mapping fixes from Christoph Hellwig:
- swiotlb area sizing fixes (Petr Tesarik)
* tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: reduce the number of areas to match actual memory pool size
swiotlb: always set the number of areas before allocating the pool
Pull irq update from Borislav Petkov:
- Optimize IRQ domain's name assignment
* tag 'irq_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqdomain: Use return value of strreplace()
Pull x86 fpu fix from Borislav Petkov:
- Do FPU AP initialization on Xen PV too which got missed by the recent
boot reordering work
* tag 'x86_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/xen: Fix secondary processors' FPU initialization
Pull x86 fix from Thomas Gleixner:
"A single fix for the mechanism to park CPUs with an INIT IPI.
On shutdown or kexec, the kernel tries to park the non-boot CPUs with
an INIT IPI. But the same code path is also used by the crash utility.
If the CPU which panics is not the boot CPU then it sends an INIT IPI
to the boot CPU which resets the machine.
Prevent this by validating that the CPU which runs the stop mechanism
is the boot CPU. If not, leave the other CPUs in HLT"
* tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/smp: Don't send INIT to boot CPU
Pull MIPS fixes from Thomas Bogendoerfer:
- fixes for KVM
- fix for loongson build and cpu probing
- DT fixes
* tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled
MIPS: dts: add missing space before {
MIPS: Loongson: Fix build error when make modules_install
MIPS: KVM: Fix NULL pointer dereference
MIPS: Loongson: Fix cpu_probe_loongson() again
Pull xfs fix from Darrick Wong:
"Nothing exciting here, just getting rid of a gcc warning that I got
tired of seeing when I turn on gcov"
* tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix uninit warning in xfs_growfs_data
Pull more smb client updates from Steve French:
- fix potential use after free in unmount
- minor cleanup
- add worker to cleanup stale directory leases
* tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Add a laundromat thread for cached directories
smb: client: remove redundant pointer 'server'
cifs: fix session state transition to avoid use-after-free issue
Lockdep is certainly right to complain about
(&vma->vm_lock->lock){++++}-{3:3}, at: vma_start_write+0x2d/0x3f
but task is already holding lock:
(&mapping->i_mmap_rwsem){+.+.}-{3:3}, at: mmap_region+0x4dc/0x6db
Invert those to the usual ordering.
Fixes: 33313a747e ("mm: lock newly mapped VMA which can be modified after it becomes visible")
Cc: stable@vger.kernel.org
Signed-off-by: Hugh Dickins <hughd@google.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
