In case memory resources for *bl_desc* were allocated, release
them before return.
Addresses-Coverity-ID: 1472021 ("Resource leak")
Fixes: 0d46690155 ("drm/nouveau/secboot/acr: Remove VLA usage")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Scrambling is required for supporting any mode over 340MHz. If it's not
supported, reject any modes that would require it.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
When SCDC is supported, make sure that we configure the GPU and monitor
to the same parameters.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The register programmed by the clock method needs to contain a different
setting for the link speed as well as special divider settings.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
High pixel clocks are required to use a 40 TMDS divider instead of 10,
and even low ones may optionally use scrambling depending on device
support.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Per the documentation in drm_get_pci_dev(), this function is deprecated
and shouldn't be used anymore. As it turns out, we're going to need to
stop using drm_get_pci_dev() anyway in order to allow us to turn off the
card before full system shutdowns, otherwise we'll hit race conditions
with userspace while trying to tear down the card on shutdown.
So, start using drm_dev_get() and drm_dev_put(), and just turn our
load/unload callbacks into open coded init/fini() functions.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We forget to free drm in all instances of failure, and additionally also
forget to destroy the master client if the other client fails
initialization.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There's literally no difference between any of the backlight init
functions besides the backlight properties they set and the backlight
callbacks that they set, so move all of the duplicated backlight init
code out of there and into nouveau_backlight_init().
This gets rid of a lot of copy pasta!
Changes since v1:
- Some of the pre-refactor callbacks were storing nv_encoder in callback
data for the backlight devices that they registered, as opposed to
nouveau_drm. This got missed and caused some bugs that didn't
originally appear on my setup (NULL kernel derefs) for some reason.
So, fix this by finding the nouveau_encoder in
nouveau_backlight_init(), and using that as the callback data for all
gens instead even if they don't care about the encoder.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Jeffery Miller <jmiller@neverware.com>
Cc: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
More consistent with the rest of the codebase, no functional changes
here.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Since we're about to use this in nouveau_backlight.c. Same thing as
DRM_WARN_ONCE, DRM_INFO_ONCE, etc...
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This time mostly further refinement of dpu1+a6xx for sdm845 and
beyond.. and hurray for more negative diffstat :-)
- Misc cleanups and fixes
- GPU preemption optimization
- a6xx perf improvements and clock fixes (ie. lets actually not run at
minimum clks)
- a6xx devfreq/DCVS
- Lots of code cleanup across dpu (Bruce, Jeykumar, Sean)
- Fixed a few crashes on startup relating to dsi (Sean)
- Add cursor support (Sravanthi, Sean)
- Properly free mdss irq on destroy (Jordan)
- Use correct encoder_type when initializing, fixes crash on boot (Stephen)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsNevCzMiLuNW1EVN6gtP3JZSir6PfnWvnCavSZM+bUFQ@mail.gmail.com
This patch uses the proper do_div() macro to perform u64 division and
guards against overflow if the result is too large for the unsigned long
return type
Fixes: a2c3c0a54d drm/msm/a6xx: Add devfreq support for a6xx
Cc: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The CP performance counter selects were accidentally marked as protected
so they couldn't be written from PM4 streams. Remove the protection
because user space does have an interest in setting up their own
counters.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
We are currently leaking a drm_crtc_commit struct for every atomic
commit containing plane state. The dpu plane destroy function cleans up
the fb reference manually, but fails to release the commit ref. As a
result, we just keep allocating drm_crtc_commits without ever freeing
them. Fortunately there's a helper function which will clean up all of
our mess at once, so use that.
Thanks to Doug Anderson for reporting the memory leak (and leaving
breadcrumbs from kmemleak!).
Reported-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This patch uses the proper do_div() macro to perform u64 division and
guards against overflow if the result is too large for the unsigned long
return type
Fixes: de0a3d094d drm/msm: re-factor devfreq code
Cc: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
size for AFBC buffers
The size of the superblocks being added to the total AFBC buffer size
got lost in the upstreaming process. Add it back.
Reviewed-by: Ayan Kumar Halder <ayan.halder@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Implement routines to estimate GPU busy time and fetching the
current frequency for the polling interval. This is required by
the devfreq framework which recommends a frequency change if needed.
The driver code then tries to set this new frequency on the GPU by
sending an Out Of Band(OOB) request to the GMU.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The devfreq framework requires the drivers to provide busy time estimations.
The GPU driver relies on the hardware performance counteres for the busy time
estimations, but different hardware revisions have counters which can be
sourced from different clocks. So the busy time estimation will be target
dependent. Additionally on targets where the clocks are completely controlled
by the on chip microcontroller, fetching and setting the current GPU frequency
will be different. This patch aims to embrace these differences by re-factoring
the devfreq code a bit.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Devfreq turns on and starts recommending power level as soon as it is
initialized. The GPU is still not powered on by the time the devfreq
init happens and this leads to problems on GPU's where register access
is needed to get/set power levels. So we start suspended and only restart
devfreq when GPU is powered on.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add out-bridge support
- This patch series enables out-bridge for LVDS bridge device support,
and also includes two cleanups and one relevant dt binding update
for this.
Add Samsung 16x16 tiled format support
- This patch series adds Samsung 16x16 tiled format to scaler and
gsc drivers. As for this, it adds Samsung specific format to
drm_forcc.h header. For the git-pull request with relevant patches,
I requested ack-by[1] to relevant maintainers but there was no any response.
I'm pretty sure no problem to go to mainline though Exynos tree
because the only user of it is Exynos.
(airlied: this looked fine to me)
[1] https://patchwork.freedesktop.org/patch/243921/
Add configurable plane alpha and pixel blend mode support
- This patch series makes mixer driver to be configuragle for
pixel blend mode and plane alpha, which also includes one fixup
to set all default values correctly after reset.
One cleanup
- This patch replaces drm_atomic_helper_suspend/resume() with
drm_mode_config_helper_suspend/resume() to remove exynos specific
suspend_state.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1538380891-24040-1-git-send-email-inki.dae@samsung.com
The target definition for a630 didn't set a reasonable
value for inactive_period so it defaulted to zero and
we were essentially powering down after every submission.
Set it back to the default value to keep the GPU from
bouncing too much during regular workloads.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This patch unifies the naming of DRM functions for reference counting
of struct drm_framebuffer. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The only HFI communication with the GMU on sdm845 happens
during initialization and all commands are synchronous. A fancy
interrupt tasklet and associated infrastructure is entirely
not eeded and puts us at the mercy of the scheduler.
Instead poll for the message signal and handle the response
immediately and go on our way.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The point of the 'force_dma' parameter for of_dma_configure
is to force the device to be set up even if DMA capability is
not described by the firmware which is exactly the use case
we have for GMU - we need SMMU to get set up but we have no
other dma capabilities since memory is managed by the GPU
driver. Currently we pass false so of_dma_configure() fails
and subsequently GMU and GPU probe does as well.
Fixes: 4b565ca5a2 ("drm/msm: Add A6XX device support")
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Tested-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
In the case where preemption is not enabled, this patch simply skips
preemption related initialization in hardware init sequence.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The return from the call to _mixer_stages can be a negative error
code however this is being assigned to an unsigned variable 'stages'
hence the check is always false. Fix this by making 'stages' an
int.
Detected by Coccinelle ("Unsigned expression compared with zero:
stages < 0")
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The current design greedily takes a big chunk of the PDC
register space instead of just the GPU specific sections
which conflicts with other drivers and generally makes
a mess of things.
Furthermore we only need to map the GPU PDC sections
just once during init so map the memory inside the function
that uses it and adjust the pointers and register offsets
accordingly.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
>From the review for the DT bindings for the GPU/GMU it
was suggested that the phandle for the GMU be
'qcom,gmu' instead of just 'gmu'.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
When CONFIG_DEV_COREDUMP isn't defined msm_gpu_crashstate_capture
doesn't pass the correct parameters.
drivers/gpu/drm/msm/msm_gpu.c: In function ‘recover_worker’:
drivers/gpu/drm/msm/msm_gpu.c:479:34: error: passing argument 2 of ‘msm_gpu_crashstate_capture’ from incompatible pointer type [-Werror=incompatible-pointer-types]
msm_gpu_crashstate_capture(gpu, submit, comm, cmd);
^~~~~~
drivers/gpu/drm/msm/msm_gpu.c:388:13: note: expected ‘char *’ but argument is of type ‘struct msm_gem_submit *’
static void msm_gpu_crashstate_capture(struct msm_gpu *gpu, char *comm,
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/msm_gpu.c:479:2: error: too many arguments to function ‘msm_gpu_crashstate_capture’
msm_gpu_crashstate_capture(gpu, submit, comm, cmd);
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/msm_gpu.c:388:13: note: declared here
static void msm_gpu_crashstate_capture(struct msm_gpu *gpu, char *comm,
In current code the function msm_gpu_crashstate_capture parameters.
Fixes: cdb95931de ("drm/msm/gpu: Add the buffer objects from the submit to the crash dump")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-By: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The index of the perf table was being set in the wrong bit position
in the register. With this fix, the GPU clock can be seen running at
desired frequency.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The [v]snprintf() functions return the size that *would have* been
written into the buffer, rather than the size *actually* written.
Which results in us trying to memcpy() past the end of the stack.
What we really want is [v]scnprintf().
Signed-off-by: Rob Clark <robdclark@gmail.com>
cur_master in dpu_encoder is assigned at modeset and cleared on
.disable(). Unfortunately dpms (or enable/disable) does not guarantee a
modeset, so cur_master is NULL when we try to re-enable it.
This patch moves the NULL assignment to setup_display where it will be
re-assigned later in the function.
Tested-by: Bruce Wang <bzwang@chromium.org>
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
