Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Previous releases - regressions:
- ethtool: fix NULL pointer dereference in phy_reply_size
- netfilter:
- allocate hook ops while under mutex
- close dangling table module init race
- restore nf_conntrack helper propagation via expectation
- tcp:
- fix potential UAF in reqsk_timer_handler().
- fix out-of-bounds access for twsk in tcp_ao_established_key().
- vsock: fix empty payload in tap skb for non-linear buffers
- hsr: fix NULL pointer dereference in hsr_get_node_data()
- eth:
- cortina: fix RX drop accounting
- ice: fix locking in ice_dcb_rebuild()
Previous releases - always broken:
- napi: avoid gro timer misfiring at end of busypoll
- sched:
- dualpi2: initialize timer earlier in dualpi2_init()
- sch_cbs: Call qdisc_reset for child qdisc
- shaper:
- fix ordering issue in net_shaper_commit()
- reject handle IDs exceeding internal bit-width
- ipv6: flowlabel: enforce per-netns limit for unprivileged callers
- tls: fix off-by-one in sg_chain entry count for wrapped sk_msg ring
- smc: avoid NULL deref of conn->lnk in smc_msg_event tracepoint
- sctp: revalidate list cursor after sctp_sendmsg_to_asoc() in SCTP_SENDALL
- batman-adv:
- reject new tp_meter sessions during teardown
- purge non-released claims
- eth:
- i40e: cleanup PTP registration on probe failure
- idpf: fix double free and use-after-free in aux device error paths
- ena: fix potential use-after-free in get_timestamp"
* tag 'net-7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
net: phy: DP83TC811: add reading of abilities
net: tls: prevent chain-after-chain in plain text SG
net: tls: fix off-by-one in sg_chain entry count for wrapped sk_msg ring
net/smc: reject CHID-0 ACCEPT that matches an empty ism_dev slot
macsec: use rcu_work to defer TX SA crypto cleanup out of softirq
macsec: use rcu_work to defer RX SA crypto cleanup out of softirq
macsec: introduce dedicated workqueue for SA crypto cleanup
net: net_failover: Fix the deadlock in slave register
MAINTAINERS: update atlantic driver maintainer
selftests/tc-testing: Add QFQ/CBS qlen underflow test
net/sched: sch_cbs: Call qdisc_reset for child qdisc
FDDI: defza: Sanitise the reset safety timer
net: ethernet: ravb: Do not check URAM suspension when WoL is active
ethtool: fix ethnl_bitmap32_not_zero() bit interval semantics
net/smc: avoid NULL deref of conn->lnk in smc_msg_event tracepoint
net/smc: fix sleep-inside-lock in __smc_setsockopt() causing local DoS
net: atm: fix skb leak in sigd_send() default branch
net: ethtool: phy: avoid NULL deref when PHY driver is unbound
net: atlantic: preserve PCI wake-from-D3 on shutdown when WOL enabled
net: shaper: reject QUEUE scope handle with missing id
...
Pull audit fixes from Paul Moore:
- Correctly log the inheritable capabilities
- Honor AUDIT_LOCKED in the AUDIT_TRIM and AUDIT_MAKE_EQUIV commands
* tag 'audit-pr-20260513' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: enforce AUDIT_LOCKED for AUDIT_TRIM and AUDIT_MAKE_EQUIV
audit: fix incorrect inheritable capability in CAPSET records
The 'dumpability' of a task is fundamentally about the memory image of
the task - the concept comes from whether it can core dump or not - and
makes no sense when you don't have an associated mm.
And almost all users do in fact use it only for the case where the task
has a mm pointer.
But we have one odd special case: ptrace_may_access() uses 'dumpable' to
check various other things entirely independently of the MM (typically
explicitly using flags like PTRACE_MODE_READ_FSCREDS). Including for
threads that no longer have a VM (and maybe never did, like most kernel
threads).
It's not what this flag was designed for, but it is what it is.
The ptrace code does check that the uid/gid matches, so you do have to
be uid-0 to see kernel thread details, but this means that the
traditional "drop capabilities" model doesn't make any difference for
this all.
Make it all make a *bit* more sense by saying that if you don't have a
MM pointer, we'll use a cached "last dumpability" flag if the thread
ever had a MM (it will be zero for kernel threads since it is never
set), and require a proper CAP_SYS_PTRACE capability to override.
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
At this time the driver is not listing any speeds
it supports. This should be ETHTOOL_LINK_MODE_100baseT1_Full_BIT
for DP83TC811. Add the missing call for phylib to read the abilities.
Fixes: b753a9faaf ("net: phy: DP83TC811: Introduce support for the DP83TC811 phy")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Sven Schuchmann <schuchmann@schleissheimer.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260512071949.6218-1-schuchmann@schleissheimer.de
[pabeni@redhat.com: dropped revision history]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sashiko points out that if end = 0 (start != 0) the current
code will create a chain link to content type right after
the wrap link:
This would create a chain where the wrap link points directly
to another chain link. The scatterlist API sg_next iterator
does not recursively resolve consecutive chain links.
meaning this is illegal input to crypto.
The wrapping link is unnecessary if end = 0. end is the entry after
the last one used so end = 0 means there's nothing pushed after
the wrap:
end start i
v v v
[ ]...[ ][ d ][ d ][ d ][ d ][rsv for wrap]
Skip the wrapping in this case.
TLS 1.3 can use the "wrapping slot" for it's chaining if end = 0.
This avoids the chain-after-chain.
Move the wrap chaining before marking END and chaining off content
type, that feels like more logical ordering to me, but should not
matter from functional perspective.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 9aaaa56845 ("bpf: Sockmap/tls, skmsg can have wrapped skmsg that needs extra chaining")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260511174920.433155-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When an sk_msg scatterlist ring wraps (sg.end < sg.start),
tls_push_record() chains the tail portion of the ring to the head
using sg_chain(). An extra entry in the sg array is reserved for
this:
struct sk_msg_sg {
[...]
/* The extra two elements:
* 1) used for chaining the front and sections when the list becomes
* partitioned (e.g. end < start). The crypto APIs require the
* chaining;
* 2) to chain tailer SG entries after the message.
*/
struct scatterlist data[MAX_MSG_FRAGS + 2];
The current code uses MAX_SKB_FRAGS + 1 as the ring size:
sg_chain(&msg_pl->sg.data[msg_pl->sg.start],
MAX_SKB_FRAGS - msg_pl->sg.start + 1,
msg_pl->sg.data);
This places the chain pointer at
sg_chain(data[start], (MAX_SKB_FRAGS - msg_start + 1) .. =
&data[start] + (MAX_SKB_FRAGS - msg_start + 1) - 1 =
data[start + (MAX_SKB_FRAGS - start + 1) - 1] =
data[MAX_SKB_FRAGS]
instead of the true last entry. This is likely due to a "race" of
the commit under Fixes landing close to
commit 031097d9e0 ("bpf: sk_msg, zap ingress queue on psock down")
Convert to ARRAY_SIZE and drop the data[start] / - start (as suggested
by Sabrina).
Reported-by: 钱一铭 <yimingqian591@gmail.com>
Fixes: 9aaaa56845 ("bpf: Sockmap/tls, skmsg can have wrapped skmsg that needs extra chaining")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260511174920.433155-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On the SMC-D client, slot 0 of ini->ism_dev[]/ini->ism_chid[] is
reserved for an SMC-Dv1 device. smc_find_ism_v2_device_clnt()
populates V2 entries starting at index 1, so when no V1 device is
selected slot 0 is left in its kzalloc()'ed state with ism_dev[0] ==
NULL and ism_chid[0] == 0.
smc_v2_determine_accepted_chid() then matches the peer's CHID against
the array starting from index 0 using the CHID alone. A malicious
peer replying to a SMC-Dv2-only proposal with d1.chid == 0 matches
the empty slot, ini->ism_selected becomes 0, and the subsequent
ism_dev[0]->lgr_lock dereference in smc_conn_create() faults at
offsetof(struct smcd_dev, lgr_lock) == 0x68:
BUG: KASAN: null-ptr-deref in _raw_spin_lock_bh+0x79/0xe0
Write of size 4 at addr 0000000000000068 by task exploit/144
Call Trace:
_raw_spin_lock_bh
smc_conn_create (net/smc/smc_core.c:1997)
__smc_connect (net/smc/af_smc.c:1447)
smc_connect (net/smc/af_smc.c:1720)
__sys_connect
__x64_sys_connect
do_syscall_64
Require ism_dev[i] to be non-NULL before accepting a CHID match.
Fixes: a7c9c5f4af ("net/smc: CLC accept / confirm V2")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260511062138.2839584-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jinliang Zheng says:
====================
macsec: use rcu_work to fix crypto cleanup in softirq context
From: Jinliang Zheng <alexjlzheng@tencent.com>
crypto_free_aead() can internally call vunmap() (e.g. via dma_free_attrs()
in hardware crypto drivers like hisi_sec2), which must not be invoked from
softirq context. Both free_rxsa() and free_txsa() are RCU callbacks that
run in softirq, causing a kernel crash on affected hardware.
This series fixes the issue by deferring the actual cleanup to a workqueue
using rcu_work, which combines the RCU grace period and workqueue dispatch
into a single primitive.
Two design decisions worth noting:
1. rcu_work instead of schedule_work() + synchronize_rcu()
An alternative would be to call schedule_work() directly from
macsec_rxsa_put()/macsec_txsa_put(), then call synchronize_rcu() at
the start of the work handler to replace the grace period previously
provided by call_rcu(). However, synchronize_rcu() blocks the worker
thread for the duration of a full RCU grace period. Under high SA
churn (e.g. tearing down an interface with many SAs), each SA would
occupy a worker thread while waiting, and multiple concurrent calls
cannot share the same grace period — leading to unnecessary latency
and resource waste.
rcu_work uses call_rcu_hurry() internally, which is fully asynchronous:
the worker thread is only dispatched after the grace period has elapsed,
and multiple concurrent queue_rcu_work() calls naturally batch under the
same grace period via the RCU subsystem's existing coalescing mechanism.
2. Dedicated workqueue instead of system_wq
Using a dedicated workqueue (macsec_wq) allows macsec_exit() to drain
exactly the work items belonging to this module — by calling
destroy_workqueue() after rcu_barrier(). If system_wq were used,
flush_scheduled_work() would drain all pending work items across the
entire system, creating unnecessary coupling with unrelated subsystems
and potentially causing unexpected delays. The dedicated workqueue
provides a clean, contained teardown path.
====================
Link: https://patch.msgid.link/20260511153102.2640368-1-alexjlzheng@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
free_txsa() is an RCU callback running in softirq context, but calls
crypto_free_aead() which can invoke vunmap() internally on hardware
crypto drivers (e.g. hisi_sec2), triggering a kernel crash.
Use rcu_work to defer the cleanup to a workqueue, for the same reasons
as the analogous fix to free_rxsa() in the previous patch.
Fixes: c09440f7dc ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260511153102.2640368-4-alexjlzheng@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
crypto_free_aead() can internally invoke vunmap() (e.g. via
dma_free_attrs() in hardware crypto drivers such as hisi_sec2).
vunmap() must not be called from softirq context, but free_rxsa()
is an RCU callback that runs in softirq, leading to a kernel crash:
vunmap+0x4c/0x70
__iommu_dma_free+0xd0/0x138
dma_free_attrs+0xf4/0x100
sec_aead_exit+0x64/0xb8 [hisi_sec2]
crypto_destroy_tfm+0x98/0x110
free_rxsa+0x28/0x50 [macsec]
rcu_do_batch+0x184/0x460
rcu_core+0xf4/0x1f8
handle_softirqs+0x118/0x330
Use rcu_work to defer the cleanup to a workqueue. rcu_work dispatches
the worker asynchronously after the RCU grace period, so no thread
blocks waiting, and concurrent releases of multiple SAs naturally
share the same grace period.
Fixes: c09440f7dc ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260511153102.2640368-3-alexjlzheng@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a dedicated ordered workqueue, macsec_wq, which will be used
by subsequent patches to defer SA crypto cleanup (crypto_free_aead and
related teardown) out of softirq context.
Using a dedicated workqueue instead of system_wq allows macsec_exit()
to drain exactly the work items belonging to this module via
destroy_workqueue(), without interfering with unrelated work items on
system_wq or causing unexpected delays elsewhere.
rcu_barrier() in macsec_exit() ensures all in-flight rcu_work callbacks
have enqueued their work items before destroy_workqueue() drains and
destroys the queue, making the two-step teardown correct and complete.
The same sequence is kept in the error path of macsec_init() as a
precaution, to mirror macsec_exit() and stay safe if work ever becomes
queueable before this point in the future.
While at it, rename the error labels in macsec_init() from the
resource-named style (rtnl:, notifier:, wq:) to the err_xxx: style
(err_rtnl:, err_notifier:, err_destroy_wq:) to align with the broader
kernel convention.
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260511153102.2640368-2-alexjlzheng@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is netdev_lock_ops() before the NETDEV_REGISTER notifier
in register_netdevice(), so use the non-locking functions
in net_failover_slave_register().
failover_slave_register() in failover_existing_slave_register() adds lock
and unlock ops too.
Call Trace:
<TASK>
__schedule+0x30d/0x7a0
schedule+0x27/0x90
schedule_preempt_disabled+0x15/0x30
__mutex_lock.constprop.0+0x538/0x9e0
__mutex_lock_slowpath+0x13/0x20
mutex_lock+0x3b/0x50
dev_set_mtu+0x40/0xe0
net_failover_slave_register+0x24/0x280
failover_slave_register+0x103/0x1b0
failover_event+0x15e/0x210
? dropmon_net_event+0xac/0xe0
notifier_call_chain+0x5e/0xe0
raw_notifier_call_chain+0x16/0x30
call_netdevice_notifiers_info+0x52/0xa0
register_netdevice+0x5f4/0x7c0
register_netdev+0x1e/0x40
_mlx5e_probe+0xe2/0x370 [mlx5_core]
mlx5e_probe+0x59/0x70 [mlx5_core]
? __pfx_mlx5e_probe+0x10/0x10 [mlx5_core]
Fixes: 4c975fd700 ("net: hold instance lock during NETDEV_REGISTER/UP")
Signed-off-by: Faicker Mo <faicker.mo@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Igor Russkikh and Egor Pomozov have left Marvell.
Take over maintenance of the atlantic driver and its PTP subsystem.
Signed-off-by: Sukhdeep Singh <sukhdeeps@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since CBS was not calling reset for its child qdisc, there are scenarios
where it could cause an underflow on its parent's qlen/backlog. When the
parent is QFQ, a null-ptr deref could occur.
Add a test case that reproduces the underflow followed by a null-ptr
deref scenario.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During a reset, CBS is not calling reset on its child qdisc, which
might cause qlen/backlog accounting issues. For example, if we have CBS
with a QFQ parent and a netem child with delay, we can create a scenario
where the parent's qlen underflows. QFQ, specifically, uses qlen to
check whether it should deference a pointer, so this scenario may cause
a null-ptr deref in QFQ:
[ 43.875639][ T319] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] SMP KASAN NOPTI
[ 43.876124][ T319] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f]
[ 43.876417][ T319] CPU: 10 UID: 0 PID: 319 Comm: ping Not tainted 7.0.0-13039-ge728258debd5 #773 PREEMPT(full)
[ 43.876751][ T319] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 43.876949][ T319] RIP: 0010:qfq_dequeue+0x35c/0x1650
[ 43.877123][ T319] Code: 00 fc ff df 80 3c 02 00 0f 85 17 0e 00 00 4c 8d 73 48 48 89 9d b8 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 76 0c 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b
[ 43.877648][ T319] RSP: 0018:ffff8881017ef4f0 EFLAGS: 00010216
[ 43.877845][ T319] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: dffffc0000000000
[ 43.878073][ T319] RDX: 0000000000000009 RSI: 0000000c40000000 RDI: ffff88810eef02b0
[ 43.878306][ T319] RBP: ffff88810eef0000 R08: ffff88810eef0280 R09: 1ffff1102120fd63
[ 43.878523][ T319] R10: 1ffff1102120fd66 R11: 1ffff1102120fd67 R12: 0000000c40000000
[ 43.878742][ T319] R13: ffff88810eef02b8 R14: 0000000000000048 R15: 0000000020000000
[ 43.878959][ T319] FS: 00007f9c51c47c40(0000) GS:ffff88817a0be000(0000) knlGS:0000000000000000
[ 43.879214][ T319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 43.879403][ T319] CR2: 000055e69a2230a8 CR3: 000000010c07a000 CR4: 0000000000750ef0
[ 43.879621][ T319] PKRU: 55555554
[ 43.879735][ T319] Call Trace:
[ 43.879844][ T319] <TASK>
[ 43.879924][ T319] __qdisc_run+0x169/0x1900
[ 43.880075][ T319] ? dev_qdisc_enqueue+0x8b/0x210
[ 43.880222][ T319] __dev_queue_xmit+0x2346/0x37a0
[ 43.880376][ T319] ? register_lock_class+0x3f/0x800
[ 43.880531][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.880684][ T319] ? __pfx___dev_queue_xmit+0x10/0x10
[ 43.880834][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.880977][ T319] ? __lock_acquire+0x819/0x1df0
[ 43.881124][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.881275][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.881418][ T319] ? __asan_memcpy+0x3c/0x60
[ 43.881563][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.881708][ T319] ? eth_header+0x165/0x1a0
[ 43.881853][ T319] ? lockdep_hardirqs_on_prepare+0xdb/0x1a0
[ 43.882031][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.882174][ T319] ? neigh_resolve_output+0x3cc/0x7e0
[ 43.882325][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.882471][ T319] ip_finish_output2+0x6b6/0x1e10
Fix this by calling qdisc_reset for CBS' child qdisc.
Sashiko caught an issue which could result in a null ptr deref if
qdisc_create_dflt() is invoked on an unitialised cbs qdisc which is exposed
by this patch. We add an early return if the qdisc is null to address this.
This is a similar approach used by two other fixes[1][2].
The proper fix for this specific issue elucidated by sashiko is to remove
the call to qdisc_reset when qdisc_create_dflt fails. Since the dflt qdisc
isn't attached anywhere yet at that point, calling the reset callback doesn't
make much sense (and as stated has been a source of two other bugs).
We plan on submitting this fix in a later patch.
[1] https://lore.kernel.org/netdev/20221018063201.306474-2-shaozhengchao@huawei.com/
[2] https://lore.kernel.org/netdev/20221018063201.306474-4-shaozhengchao@huawei.com/
Fixes: 585d763af0 ("net/sched: Introduce Credit Based Shaper (CBS) qdisc")
Reported-by: Junyoung Jang <graypanda.inzag@gmail.com>
Tested-by: Junyoung Jang <graypanda.inzag@gmail.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The reset actions of the DEFZA adapters are exceedingly slow, taking up
to 30 seconds to complete by the device spec and typically in the range
of 10 seconds in reality, as required for the device RTOS to boot, still
quite a lot. Therefore a state machine is used that's interrupt driven,
however a safety mechanism is required in case of adapter malfunction,
so that if no state change interrupt has arrived in time, then the
situation is taken care of.
The safety mechanism depends on the origin of the reset. For regular
adapter initialisation at the device probe time a sleep is requested.
However a reset is also required by the device spec when the adapter has
transitioned into the halted state, such as in response to a PC Trace
event in the course of ring fault recovery, possibly a common network
event. In that case no sleep is possible as a device halt is reported
at the hardirq level.
A timer is therefore set up to ensure progress in case no adapter state
change interrupt has arrived in time, but as from commit 168f6b6ffb
("timers: Use del_timer_sync() even on UP") a warning is issued as the
timer is deleted in the hardirq handler upon an expected state change:
defza: v.1.1.4 Oct 6 2018 Maciej W. Rozycki
tc2: DEC FDDIcontroller 700 or 700-C at 0x18000000, irq 4
tc2: resetting the board...
------------[ cut here ]------------
WARNING: kernel/time/timer.c:1611 at __timer_delete_sync+0x104/0x120, CPU#0: swapper/0/0
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.0.0-dirty #2 VOLUNTARY
Stack : 9800000002027d08 00000000140120e0 0000000000000000 ffffffff8089d468
0000000000000000 0000000000000000 ffffffff807ed6b8 ffffffff80897458
ffffffff80897400 9800000002027b88 0000000000000000 7070617773203a6d
0000000000000000 9800000002027ba4 0000000000001000 6465746e69617420
0000000000000000 ffffffff807ed6b8 00000000140120e0 0000000000000009
000000000000064b ffffffff800dd14c 0000000000000036 9800000002184000
0000000000000000 0000000000000020 0000000000000000 ffffffff80910000
ffffffff8085c000 9800000002027c70 0000000000000001 ffffffff80045fa0
0000000000000000 0000000000000000 0000000000000000 0000000000000009
000000000000064b ffffffff800502b8 ffffffff807ed6b8 ffffffff80045fa0
...
Call Trace:
[<ffffffff800502b8>] show_stack+0x28/0xf0
[<ffffffff80045fa0>] dump_stack_lvl+0x48/0x7c
[<ffffffff80068c98>] __warn+0xa0/0x128
[<ffffffff8004120c>] warn_slowpath_fmt+0x64/0xa4
[<ffffffff800dd14c>] __timer_delete_sync+0x104/0x120
[<ffffffff804934ac>] fza_interrupt+0xc74/0xeb8
[<ffffffff800c6390>] __handle_irq_event_percpu+0x70/0x228
[<ffffffff800c6560>] handle_irq_event_percpu+0x18/0x78
[<ffffffff800cc320>] handle_percpu_irq+0x50/0x80
[<ffffffff800c5970>] generic_handle_irq+0x90/0xd0
[<ffffffff806e956c>] do_IRQ+0x1c/0x30
[<ffffffff8004ad4c>] handle_int+0x148/0x154
[<ffffffff800ab7c0>] do_idle+0x40/0x108
[<ffffffff800abb0c>] cpu_startup_entry+0x2c/0x38
[<ffffffff806dfec8>] kernel_init+0x0/0x108
---[ end trace 0000000000000000 ]---
tc2: OK
tc2: model 700 (DEFZA-AA), MMF PMD, address 08-00-2b-xx-xx-xx
tc2: ROM rev. 1.0, firmware rev. 1.2, RMC rev. A, SMT ver. 1
tc2: link unavailable
------------[ cut here ]------------
WARNING: kernel/time/timer.c:1611 at __timer_delete_sync+0x104/0x120, CPU#0: swapper/0/0
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G W 7.0.0-dirty #2 VOLUNTARY
Tainted: [W]=WARN
Stack : 9800000002027d08 00000000140120e0 0000000000000000 ffffffff8089d468
0000000000000000 0000000000000000 ffffffff807ed6b8 ffffffff80897458
ffffffff80897400 9800000002027b88 0000000000000000 0000000000000000
0000000000000000 9800000002027ba4 0000000000001000 0000000000000000
0000000000000000 ffffffff807ed6b8 00000000140120e0 0000000000000009
000000000000064b ffffffff800dd14c 0000000000000036 9800000002184000
0000000000000000 0000000000000020 0000000000000000 ffffffff80910000
ffffffff8085c000 9800000002027c70 0000000000000001 ffffffff80045fa0
0000000000000000 0000000000000000 0000000000000000 0000000000000009
000000000000064b ffffffff800502b8 ffffffff807ed6b8 ffffffff80045fa0
...
Call Trace:
[<ffffffff800502b8>] show_stack+0x28/0xf0
[<ffffffff80045fa0>] dump_stack_lvl+0x48/0x7c
[<ffffffff80068c98>] __warn+0xa0/0x128
[<ffffffff8004120c>] warn_slowpath_fmt+0x64/0xa4
[<ffffffff800dd14c>] __timer_delete_sync+0x104/0x120
[<ffffffff804934ac>] fza_interrupt+0xc74/0xeb8
[<ffffffff800c6390>] __handle_irq_event_percpu+0x70/0x228
[<ffffffff800c6560>] handle_irq_event_percpu+0x18/0x78
[<ffffffff800cc320>] handle_percpu_irq+0x50/0x80
[<ffffffff800c5970>] generic_handle_irq+0x90/0xd0
[<ffffffff806e956c>] do_IRQ+0x1c/0x30
[<ffffffff8004ad4c>] handle_int+0x148/0x154
[<ffffffff806de8a4>] arch_local_irq_disable+0x4/0x28
[<ffffffff800ab7d0>] do_idle+0x50/0x108
[<ffffffff800abb0c>] cpu_startup_entry+0x2c/0x38
[<ffffffff806dfec8>] kernel_init+0x0/0x108
---[ end trace 0000000000000000 ]---
tc2: registered as fddi0
The immediate origin of the new warning is the switch away from aliasing
del_timer_sync() to del_timer() (timer_delete_sync() to timer_delete()
in terms of current function names) for UP configurations, which however
is the only choice for this driver anyway as no SMP hardware supports
the TURBOchannel bus this device interfaces to. Therefore there is a
very remote issue only this is a sign of.
Specifically if an adapter reset issued upon a transition to the halted
state times out and first triggers fza_reset_timer() for another reset
assertion, which then schedules fza_reset_timer() for reset deassertion
and then that second call is pre-empted after poking at the hardware,
but before the timer has been rearmed and owing to high system load
causing exceedingly high scheduling latency control is not handed back
before a transition to the uninitialised state has caused the timer to
be deleted even before it has been started, then fza_reset_timer() will
be called yet again and issue another reset even though by then the
adapter has already recovered.
Prevent this situation from happening by switching to timer_delete() for
the transition to the halted state and protect the code region affected
with a spinlock, also to make sure add_timer() has not been called twice
in a row due to an execution race between the interrupt handler and the
timer handler (though it could only happen on SMP, but let's keep the
driver clean). It's a very unlikely sequence of events to happen and
therefore there's no point in trying to be overly clever about it, such
as by placing printk() calls outside the protection. For the transition
to the uninitialised state switch to timer_delete_sync_try() instead, so
that a timer isn't deleted that's just been rearmed by the timer handler
and needs to watch for the device to come out of reset again (again, an
SMP scenario only).
Retain timer_delete_sync() invocations outside the hardirq context for a
stray timer not to fire once device structures have been released.
Fixes: 61414f5ec9 ("FDDI: defza: Add support for DEC FDDIcontroller 700 TURBOchannel adapter")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull sched_ext fixes from Tejun Heo:
"The bulk of this is hardening of the new sub-scheduler infrastructure.
- UAFs and lifecycle bugs on the sub-sched attach/detach paths:
parent sub_kset freed under a racing child, list_del_rcu on an
uninitialized list head, ops->priv stomped by concurrent
attach/detach, and a UAF in the init-failure error path
- Task state-machine reorg closing concurrent enable-vs-dead races: a
task exiting during the unlocked init window could trip NULL ops
derefs or skip exit_task() cleanup
- A scx_link_sched() self-deadlock on scx_sched_lock
- isolcpus: stop dereferencing the now-RCU-protected HK_TYPE_DOMAIN
cpumask without RCU, and stop rejecting BPF schedulers when only
cpuset isolated partitions are active
- PREEMPT_RT: disable irq_work runs in hardirq context so dumps show
the failing task rather than the irq_work kthread
- Assorted !CONFIG_EXT_SUB_SCHED, randconfig, and selftest build
fixes"
* tag 'sched_ext-for-7.1-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use HK_TYPE_DOMAIN_BOOT to detect isolcpus= domain isolation
sched_ext: Defer sub_kset base put to scx_sched_free_rcu_work
sched_ext: INIT_LIST_HEAD() &sch->all in scx_alloc_and_add_sched()
sched_ext: Drop NONE early return in scx_disable_and_exit_task()
sched_ext: Avoid UAF in scx_root_enable_workfn() init failure path
sched_ext: Clear ops->priv on scx_alloc_and_add_sched() error paths
sched_ext: Fix ops->priv clobber on concurrent attach/detach
selftests/sched_ext: Fix build error in dequeue selftest
sched_ext: Handle SCX_TASK_NONE in disable/switched_from paths
sched_ext: Close sub-sched init race with post-init DEAD recheck
sched_ext: Close root-enable vs sched_ext_dead() race with SCX_TASK_INIT_BEGIN
sched_ext: Replace SCX_TASK_OFF_TASKS flag with SCX_TASK_DEAD state
sched_ext: Inline scx_init_task() and move RESET_RUNNABLE_AT into scx_set_task_state()
sched_ext: Cleanups in preparation for the SCX_TASK_INIT_BEGIN/DEAD work
sched_ext: Use IRQ_WORK_INIT_HARD() to initialize sch->disable_irq_work
sched_ext: Fix !CONFIG_EXT_SUB_SCHED build warnings
sched_ext: Drop unused scx_find_sub_sched() stub
sched_ext: Move scx_error() out of scx_link_sched()'s lock region
Pull cgroup fixes from Tejun Heo:
- cpuset fixes:
- Partition invalidation could return CPUs still in use by sibling
partitions, producing overlapping effective_cpus
- cpuset_can_attach() over-reserved DL bandwidth on moves that
stayed within the same root domain
- Pending DL migration state leaked into later attaches when a
later can_attach() check failed
- Reorder PF_EXITING and __GFP_HARDWALL checks so dying tasks can
allocate from any node and exit quickly
- dmem: propagate -ENOMEM instead of spinning forever when the fallback
pool allocation also fails
- selftests/cgroup: percpu test error-path leak, bogus numeric
comparison of cpuset strings, and a zero-length read() that silently
passed OOM-kill tests
* tag 'cgroup-for-7.1-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Return only actually allocated CPUs during partition invalidation
selftests/cgroup: Fix error path leaks in test_percpu_basic
cgroup/cpuset: Reserve DL bandwidth only for root-domain moves
cgroup/cpuset: Reset DL migration state on can_attach() failure
selftests/cgroup: Fix string comparison in write_test
selftests/cgroup: Fix cg_read_strcmp() empty string comparison
cgroup/dmem: Return -ENOMEM on failed pool preallocation
cgroup/cpuset: move PF_EXITING check before __GFP_HARDWALL in cpuset_current_node_allowed()
Pull workqueue fixes from Tejun Heo:
- Plug a wq->cpu_pwq leak on the WQ_UNBOUND allocation failure path
- Fix a cancel_delayed_work_sync() livelock against drain_workqueue()
caused by the drain/destroy reject path leaving WORK_STRUCT_PENDING
set with no owner
* tag 'wq-for-7.1-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Fix wq->cpu_pwq leak in alloc_and_link_pwqs() WQ_UNBOUND path
workqueue: Release PENDING in __queue_work() drain/destroy reject path
scx_enable() refuses to attach a BPF scheduler when isolcpus=domain is
in effect by comparing housekeeping_cpumask(HK_TYPE_DOMAIN) against
cpu_possible_mask.
Since commit 27c3a5967f ("sched/isolation: Convert housekeeping
cpumasks to rcu pointers"), HK_TYPE_DOMAIN's cpumask is RCU protected
and dereferencing it requires either RCU read lock, the cpu_hotplug
write lock, or the cpuset lock; scx_enable() holds none of these, so
booting with isolcpus=domain and attaching any BPF scheduler triggers
the following lockdep splat:
=============================
WARNING: suspicious RCU usage
-----------------------------
kernel/sched/isolation.c:60 suspicious rcu_dereference_check() usage!
1 lock held by scx_flash/281:
#0: ffffffff8379fce0 (update_mutex){+.+.}-{4:4}, at:
bpf_struct_ops_link_create+0x134/0x1c0
Call Trace:
dump_stack_lvl+0x6f/0xb0
lockdep_rcu_suspicious.cold+0x37/0x70
housekeeping_cpumask+0xcd/0xe0
scx_enable.isra.0+0x17/0x120
bpf_scx_reg+0x5e/0x80
bpf_struct_ops_link_create+0x151/0x1c0
__sys_bpf+0x1e4b/0x33c0
__x64_sys_bpf+0x21/0x30
do_syscall_64+0x117/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
In addition, commit 03ff735101 ("cpuset: Update HK_TYPE_DOMAIN cpumask
from cpuset") made HK_TYPE_DOMAIN include cpuset isolated partitions as
well, which means the current check also rejects BPF schedulers when a
cpuset partition is active. That contradicts the original intent of
commit 9f391f94a1 ("sched_ext: Disallow loading BPF scheduler if
isolcpus= domain isolation is in effect"), which explicitly noted that
cpuset partitions are honored through per-task cpumasks and should not
be rejected.
Switch to housekeeping_enabled(HK_TYPE_DOMAIN_BOOT), which reads only
the housekeeping flag bit (no RCU dereference) and reflects exactly the
boot-time isolcpus= configuration that the error message refers to.
Fixes: 27c3a5967f ("sched/isolation: Convert housekeeping cpumasks to rcu pointers")
Cc: stable@vger.kernel.org # v7.0+
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
In update_parent_effective_cpumask() with partcmd_invalidate, the CPUs
to return to the parent are computed as:
adding = cpumask_and(tmp->addmask, xcpus, parent->effective_xcpus);
where xcpus = user_xcpus(cs) which returns cs->exclusive_cpus (if set)
or cs->cpus_allowed. When exclusive_cpus is not set, user_xcpus(cs) can
contain CPUs that were never actually granted to the partition due to
sibling exclusion in compute_excpus(). Consequently, the invalidation
may return CPUs to the parent that remain in use by sibling partitions,
causing overlapping effective_cpus and triggering the
WARN_ON_ONCE(1) in generate_sched_domains().
Use cs->effective_xcpus instead, which reflects the CPUs actually
granted to this partition.
Reproducer (on a 4-CPU machine):
cd /sys/fs/cgroup
mkdir a1 b1
# a1 becomes partition root with CPUs 0-1
echo "0-1" > a1/cpuset.cpus
echo "root" > a1/cpuset.cpus.partition
# b1 becomes partition root with CPUs 1-2, but sibling exclusion
# reduces its effective_xcpus to CPU 2 only
echo "1-2" > b1/cpuset.cpus
echo "root" > b1/cpuset.cpus.partition
# b1 changes cpus_allowed to 0-1 -> partition invalidation
echo "0-1" > b1/cpuset.cpus
# Expected: CPUs 2-3 (only CPU 2 returned from b1)
# Actual: CPUs 1-3 (CPU 0-1 returned, overlapping with a1)
cat cpuset.cpus.effective
dmesg will also show a WARNING from generate_sched_domains() reporting
overlapping partition root effective_cpus.
Fixes: 2a3602030d ("cgroup/cpuset: Don't invalidate sibling partitions on cpuset.cpus conflict")
Cc: stable@vger.kernel.org # v7.0+
Signed-off-by: sunshaojie <sunshaojie@kylinos.cn>
Tested-by: Chen Ridong <chenridong@huaweicloud.com>
Reviewed-by: Chen Ridong <chenridong@huaweicloud.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull kvm fixes from Paolo Bonzini:
"arm64:
- Add the pKVM side of the workaround for ARM's erratum 4193714,
provided that the EL3 firmware does its part of the job. KVM will
refuse to initialise otherwise
- Correctly handle 52bit VAs for guest EL2 stage-1 translations when
running under NV with E2H==0
- Correctly deal with permission faults in guest_memfd memslots
- Fix the steal-time selftest after the infrastructure was reworked
- Make sure the host cannot pass a non-sensical clock update to the
EL2 tracing infrastructure
- Appoint Steffen Eiden as a reviewer in anticipation of the KVM/s390
ability to run arm64 guests, which will inevitably lead to arm64
code being directly used on s390
- Make sure that EL2 is configured with both exception entry and exit
being Context Synchronization Events
- Handle the current vcpu being NULL on EL2 panic
- Fix the selftest_vcpu memcache being empty at the point of donation
or sharing
- Check that the memcache has enough capacity before engaging on the
share/donate path
- Fix __deactivate_fgt() to use its parameter rather than a variable
in the macro context
s390:
- Fix array overrun with large amounts of PCI devices
x86:
- Never use L0's PAUSE loop exiting while L2 is running, since it's
unlikely that a nested guest will help solving the hypervisor's
spinlock contention
- Fix emulation of MOVNTDQA
- Fix typo in Xen hypercall tracepoint
- Add back an optimization that was left behind when recently fixing
a bug
- Add module parameter to disable CET, whose implementation seems to
have issues. For now it remains enabled by default
Generic:
- Reject offset causing an unsigned overflow in kvm_reset_dirty_gfn()
Documentation:
- Update stale links
Selftests:
- Fix guest_memfd_test with host page size > guest page size"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
KVM: VMX: introduce module parameter to disable CET
KVM: x86: Swap the dst and src operand for MOVNTDQA
KVM: x86: use again the flush argument of __link_shadow_page()
KVM: selftests: Ensure gmem file sizes are multiple of host page size
Documentation: kvm: update links in the references section of AMD Memory Encryption
KVM: nSVM: Never use L0's PAUSE loop exiting while L2 is running
KVM: x86: Fix Xen hypercall tracepoint argument assignment
KVM: Reject wrapped offset in kvm_reset_dirty_gfn()
KVM: arm64: Pre-check vcpu memcache for host->guest donate
KVM: arm64: Pre-check vcpu memcache for host->guest share
KVM: arm64: Seed pkvm_ownership_selftest vcpu memcache
KVM: arm64: Fix __deactivate_fgt macro parameter typo
KVM: arm64: Guard against NULL vcpu on VHE hyp panic path
KVM: arm64: Make EL2 exception entry and exit context-synchronization events
MAINTAINERS: Add Steffen as reviewer for KVM/arm64
KVM: arm64: Remove potential UB on nvhe tracing clock update
KVM: selftests: arm64: Fix steal_time test after UAPI refactoring
KVM: arm64: Handle permission faults with guest_memfd
KVM: arm64: nv: Consider the DS bit when translating TCR_EL2
KVM: arm64: Work around C1-Pro erratum 4193714 for protected guests
...
When cg_name_indexed() returns NULL partway through the child creation
loop, the code returned -1 without running cleanup_children and cleanup.
That left the `parent` pathname allocation unreleased and did not remove
child cgroup directories already created under the parent. Fix by jumping
to cleanup_children instead of returning.
When cg_create() fails, `child` (the pathname from cg_name_indexed())
was not freed before cleanup_children. Fix by freeing `child` before
branching to cleanup_children.
Fixes: 90631e1dea ("kselftests: cgroup: add perpcu memory accounting test")
Signed-off-by: Yu Miao <yumiao@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull liveupdate fixes from Mike Rapoport:
"A few fixes for kexec handover and liveupdate:
- make sure KHO is skipped for crash kernel
- fix error reporting in memfd preservation if it fails mid-loop
- don't allow preserving memfds whose page count exceeds UINT_MAX
- fix documentation of memfd seals preservation to match the code"
* tag 'fixes-2026-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux:
mm/memfd_luo: document preservation of file seals
mm/memfd_luo: reject memfds whose page count exceeds UINT_MAX
mm/memfd_luo: report error when restoring a folio fails mid-loop
kho: skip KHO for crash kernel
When updating the driver to match latest datasheet to suspend access to
URAM when suspending DMA transfers a corner-case was missed, URAM access
will not be suspended if WoL is enabled. This lead to the error message
(correctly) being triggered as URAM access is not suspended even tho
it's requested as part of stopping DMA.
Avoid checking if URAM access is suspended and printing the error
message if WoL is enabled when we suspend the system, as we know it will
not be.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdWnjV%3DHGE1o08zLhUfTgOSene5fYx1J5GG10mB%2BToq8qg@mail.gmail.com/
Fixes: 353d8e7989 ("net: ethernet: ravb: Suspend and resume the transmission flow")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethnl_bitmap32_not_zero() should return true if some bit in [start, end)
is set:
- Fix inverted memchr_inv() sense: return true when the scan finds a
non-zero byte, not when the middle words are all zero.
- Return false for an empty interval (end <= start).
- When end is 32-bit aligned, indices in [start, end) do not include any
bits from map[end_word]; return false after earlier checks found no
non-zero data.
Fixes: 10b518d4e6 ("ethtool: netlink bitset handling")
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The smc_msg_event tracepoint class, shared by smc_tx_sendmsg and
smc_rx_recvmsg, unconditionally dereferences smc->conn.lnk:
__string(name, smc->conn.lnk->ibname)
conn->lnk is only set for SMC-R; for SMC-D it is NULL. Other code on
these paths already handles this (e.g. !conn->lnk in
SMC_STAT_RMB_TX_SIZE_SMALL()). With the tracepoint enabled, the first
sendmsg()/recvmsg() on an SMC-D socket crashes:
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [...]
RIP: 0010:strlen+0x1e/0xa0
Call Trace:
trace_event_raw_event_smc_msg_event (net/smc/smc_tracepoint.h:44)
smc_rx_recvmsg (net/smc/smc_rx.c:515)
smc_recvmsg (net/smc/af_smc.c:2859)
__sys_recvfrom (net/socket.c:2315)
__x64_sys_recvfrom (net/socket.c:2326)
do_syscall_64
The faulting address 0x3e0 is offsetof(struct smc_link, ibname),
confirming the NULL ->lnk deref. Enabling the tracepoint requires
root, but the trigger itself is unprivileged: socket(AF_SMC, ...) has
no capability check, and SMC-D negotiation needs no admin step on
s390 or on x86 with the loopback ISM device loaded.
Log an empty device name for SMC-D instead of dereferencing NULL.
Fixes: aff3083f10 ("net/smc: Introduce tracepoints for tx and rx msg")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A logic flaw in __smc_setsockopt() allows a local unprivileged user to
cause a Denial of Service (DoS) by holding the socket lock indefinitely.
The function __smc_setsockopt() calls copy_from_sockptr() while holding
lock_sock(sk). By passing a userfaultfd-monitored memory page (or
FUSE-backed memory on systems where unprivileged userfaultfd is disabled)
as the optval, an attacker can halt execution during the copy operation,
keeping the lock held.
Combined with asynchronous tear-down operations like shutdown(), this
exhausts the kernel wq (kworkers) and triggers the hung task watchdog.
[ 240.123456] INFO: task kworker/u8:2 blocked for more than 120 seconds.
[ 240.123489] Call Trace:
[ 240.123501] smc_shutdown+...
[ 240.123512] lock_sock_nested+...
This patch moves the user-space copy outside the lock_sock() critical
section to prevent the issue.
Fixes: a6a6fe27ba ("net/smc: Dynamic control handshake limitation by socket options")
Signed-off-by: Nicolò Coccia <n.coccia96@gmail.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Tested-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
phydev->drv can become NULL while the phy_device is still attached to
its net_device, namely after the PHY driver is unbound via sysfs:
echo <mdio_id> > /sys/bus/mdio_bus/drivers/<phy_drv>/unbind
phy_remove() clears phydev->drv but doesn't call phy_detach(), so the
phy_device stays in the link topology xarray and ethnl_req_get_phydev()
still hands it back. ETHTOOL_MSG_PHY_GET then oopses on:
rep_data->drvname = kstrdup(phydev->drv->name, GFP_KERNEL);
drvname is already treated as optional by phy_reply_size(),
phy_fill_reply() and phy_cleanup_data(), so just skip the allocation
when there is no driver bound.
Fixes: 9dd2ad5e92 ("net: ethtool: phy: Convert the PHY_GET command to generic phy dump")
Cc: stable@vger.kernel.org # 6.13.x
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260509215046.107157-1-devnexen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The shutdown handler aq_pci_shutdown() unconditionally calls
pci_wake_from_d3(pdev, false), clearing the PCI PME_En bit even when
wake-on-LAN has been configured. While aq_nic_shutdown() correctly
programs the NIC firmware via aq_nic_set_power() to listen for magic
packets, the PCI subsystem will not propagate the resulting PME wake
event from D3, so the system never wakes after poweroff.
WOL from suspend (S3) is unaffected because aq_suspend_common() does
not touch pci_wake_from_d3() and relies on the PM core's wake
configuration via device_may_wakeup().
This affects all atlantic-supported NICs (AQC107/108/111/112/113);
users have reported that WOL works if the atlantic driver is never
loaded, but breaks once it has run its shutdown path.
Pass the configured WOL state to pci_wake_from_d3() instead of a
literal false, so the PCI PME_En bit is preserved when the user has
armed WOL via ethtool.
Fixes: 90869ddfef ("net: aquantia: Implement pci shutdown callback")
Cc: stable@vger.kernel.org
Signed-off-by: Zoran Ilievski <goodboy@rexbytes.com>
Reviewed-by: Sukhdeep Singh <sukhdeeps@marvell.com>
Link: https://patch.msgid.link/20260511064002.1857-1-goodboy@rexbytes.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
scx_sub_enable_workfn() pins parent->kobj before dropping scx_sched_lock,
but that does not pin parent->sub_kset. Concurrent disable can
kset_unregister and free sub_kset before scx_alloc_and_add_sched()
dereferences it.
Split sub_kset teardown: kobject_del() at disable keeps sysfs removal; defer
kobject_put() to scx_sched_free_rcu_work so the memory survives. A racing
child sees state_in_sysfs=0 with valid memory, sysfs_create_dir() fails, and
the existing exit_kind gate in scx_link_sched() turns it away with -ENOENT.
Fixes: 411d3ef1a7 ("sched_ext: Unregister sub_kset on scheduler disable")
Signed-off-by: Tejun Heo <tj@kernel.org>
On scx_link_sched() error paths (parent disabled, hash insert failure),
&sch->all is never added to scx_sched_all. The cleanup path runs
scx_unlink_sched() unconditionally, which calls list_del_rcu(&sch->all) on a
list_head that was never initialized triggering a corruption warning.
Initialize &sch->all.
Fixes: 54be8de423 ("sched_ext: Factor out scx_link_sched() and scx_unlink_sched()")
Signed-off-by: Tejun Heo <tj@kernel.org>
d3e73a0808 ("sched_ext: Handle SCX_TASK_NONE in disable/switched_from
paths") skipped the trailing scx_set_task_sched(p, NULL) on NONE tasks.
After scx_fail_parent() parks a task at NONE/sched=parent and the parent
is later freed via queue_rcu_work() during root_disable, the preserved
p->scx.sched dangles - print_scx_info() from sched_show_task() reads
sch->ops.name from freed memory.
Drop the early return. __scx_disable_and_exit_task() already short-
circuits on NONE and the SUB_INIT block was cleared by
scx_fail_parent()'s earlier call, so clearing p->scx.sched is the only
work left - and the one thing the path actually needs.
v2: Extend the SUB_INIT block comment to note that the flag is only
set on the sub-enable path, so it's always clear on the NONE
re-entry (Andrea).
Fixes: d3e73a0808 ("sched_ext: Handle SCX_TASK_NONE in disable/switched_from paths")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Swap the MOVNTDQA operands, as MOVNTDQA does NOT in fact have "the same
characteristics as 0F E7 (MOVNTDQ)"; MOVNTDQA loads from memory and stores
to registers, while MOVNTDQ loads from registers and stores to memory.
Per the SDM:
MOVNTDQ - Move packed integer values in xmm1 to m128 using non-temporal
hint.
MOVNTDQA - Move double quadword from m128 to xmm1 using non-temporal hint
if WC memory type.
Reported-by: Josh Eads <josheads@google.com>
Fixes: c57d9bafbd ("KVM: x86: Add support for emulating MOVNTDQA")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260506213514.2781948-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Except in the case of parentless nested-TDP pages, mmu_page_zap_pte()
clears the SPTE but leaves the invalid_list empty. In this case, using
kvm_flush_remote_tlbs() as kvm_mmu_remote_flush_or_zap() does is overkill.
Avoid flushing the entirety of the remote TLBs unless the invalid_list
was populated: instead, use a more efficient gfn-targeting flush (if
available) and skip it altogether if the caller guarantees that a TLB
flush is not necessary.
Based-on: <20260503201029.106481-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260503210917.121840-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When creating a guest_memfd file and associated memslot to validate shared
guest memory, size the file+memslot to the maximum of the host or guest
page size. Attempting to allocate a single guest page will fail if the
host page size is greater than the guest page size, as KVM requires that
the size of memslots and guest_memfd files are a multiple of the host page
size.
For simplicity, verify the entire file can be shared between guest and host,
e.g. instead of trying to validate "partial" mappings.
Fixes: 42188667be ("KVM: selftests: Add guest_memfd testcase to fault-in on !mmap()'d memory")
Reported-by: Zenghui Yu <zenghui.yu@linux.dev>
Closes: https://lore.kernel.org/all/0064952b-048c-455d-ad89-e27e5cb82591@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260512155634.772602-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/arm64 fixes for 7.1, take #2
- Add the pKVM side of the workaround for ARM's erratum 4193714, provided
that the EL3 firmware does its part of the job. KVM will refuse to
initialise otherwise.
- Correctly handle 52bit VAs for guest EL2 stage-1 translations when
running under NV with E2H==0.
- Correctly deal with permission faults in guest_memfd memslots.
- Fix the steal-time selftest after the infrastructure was reworked.
- Make sure the host cannot pass a non-sensical clock update to the
EL2 tracing infrastructure.
- Appoint Steffen Eiden as a reviewer in anticipation of the KVM/s390
ability to run arm64 guests, which will inevitably lead to arm64
code being directly used on s390.
- Make sure that EL2 is configured with both exception entry and exit
being Context Synchronization Events.
- Handle the current vcpu being NULL on EL2 panic.
- Fix the selftest_vcpu memcache being empty at the point of donation or
sharing.
- Check that the memcache has enough capacity before engaging on the
share/donate path.
- Fix __deactivate_fgt() to use its parameter rather than a variable
in the macro context.
Never use L0's (KVM's) PAUSE loop exiting controls while L2 is running,
and instead always configure vmcb02 according to L1's exact capabilities
and desires.
The purpose of intercepting PAUSE after N attempts is to detect when the
vCPU may be stuck waiting on a lock, so that KVM can schedule in a
different vCPU that may be holding said lock. Barring a very interesting
setup, L1 and L2 do not share locks, and it's extremely unlikely that an
L1 vCPU would hold a spinlock while running L2. I.e. having a vCPU
executing in L1 yield to a vCPU running in L2 will not allow the L1 vCPU
to make forward progress, and vice versa.
While teaching KVM's "on spin" logic to only yield to other vCPUs in L2 is
doable, in all likelihood it would do more harm than good for most setups.
KVM has limited visibility into which L2 "vCPUs" belong to the same VM,
and thus share a locking domain. And even if L2 vCPUs are in the same
VM, KVM has no visilibity into L2 vCPU's that are scheduled out by the
L1 hypervisor.
Furthermore, KVM doesn't actually steal PAUSE exits from L1. If L1 is
intercepting PAUSE, KVM will route PAUSE exits to L1, not L0, as
nested_svm_intercept() gives priority to the vmcb12 intercept. As such,
overriding the count/threshold fields in vmcb02 with vmcb01's values is
nonsensical, as doing so clobbers all the training/learning that has been
done in L1.
Even worse, if L1 is not intercepting PAUSE, i.e. KVM is handling PAUSE
exits, then KVM will adjust the PLE knobs based on L2 behavior, which could
very well be detrimental to L1, e.g. due to essentially poisoning L1 PLE
training with bad data.
And copying the count from vmcb02 to vmcb01 on a nested VM-Exit makes even
less sense, because again, the purpose of PLE is to detect spinning vCPUs.
Whether or not a vCPU is spinning in L2 at the time of a nested VM-Exit
has no relevance as to the behavior of the vCPU when it executes in L1.
The only scenarios where any of this actually works is if at least one
of KVM or L1 is NOT intercepting PAUSE for the guest. Per the original
changelog, those were the only scenarios considered to be supported.
Disabling KVM's use of PLE makes it so the VM is always in a "supported"
mode.
Last, but certainly not least, using KVM's count/threshold instead of the
values provided by L1 is a blatant violation of the SVM architecture.
Fixes: 74fd41ed16 ("KVM: x86: nSVM: support PAUSE filtering when L0 doesn't intercept PAUSE")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://patch.msgid.link/20260508213321.373309-1-seanjc@google.com/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_reset_dirty_gfn() guards the gfn range with
if (!memslot || (offset + __fls(mask)) >= memslot->npages)
return;
but offset is u64 and the addition is unchecked. The check can be
silently bypassed by a u64 wrap.
The dirty ring backing those entries is MAP_SHARED at
KVM_DIRTY_LOG_PAGE_OFFSET of the vcpu fd, so the VMM can rewrite the
slot and offset fields of any entry between when the kernel pushes
them and when KVM_RESET_DIRTY_RINGS consumes them. On reset,
kvm_dirty_ring_reset() re-reads the values via READ_ONCE() and feeds
them straight back into this check; only the flags handshake is
treated as the handover, the slot/offset payload is taken on trust.
Crafting two entries
entry[i].offset = 0xffffffffffffffc1
entry[i+1].offset = 0
makes the coalescing loop in kvm_dirty_ring_reset() compute
delta = (s64)(0 - 0xffffffffffffffc1) = 63
which falls in [0, BITS_PER_LONG), so it folds entry[i+1] into the
existing mask by setting bit 63. The trailing kvm_reset_dirty_gfn()
call then sees offset = 0xffffffffffffffc1 and __fls(mask) = 63;
the sum is 0 in u64 and the bounds check passes.
That offset propagates into kvm_arch_mmu_enable_log_dirty_pt_masked()
unchanged. On the legacy MMU path -- kvm_memslots_have_rmaps() ==
true, i.e. shadow paging, any VM that has allocated shadow roots, or
a write-tracked slot -- it reaches gfn_to_rmap(), which indexes
slot->arch.rmap[0][] with a near-U64_MAX gfn. That is an
out-of-bounds load of a kvm_rmap_head, followed by a conditional
clear of PT_WRITABLE_MASK in whatever the loaded pointer points at.
The path is reachable from any process holding /dev/kvm.
Range-check offset on its own first, so the addition cannot wrap.
memslot->npages is bounded well below U64_MAX, so once offset <
npages holds, offset + __fls(mask) (with __fls(mask) < BITS_PER_LONG)
stays in range.
Fixes: fb04a1eddb ("KVM: X86: Implement ring-based dirty memory tracking")
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Sacks <contact@xchglabs.com>
Link: https://patch.msgid.link/20260512060742.1628959-1-contact@xchglabs.com/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AUDIT_ADD_RULE and AUDIT_DEL_RULE correctly check for AUDIT_LOCKED
and return -EPERM, but AUDIT_TRIM and AUDIT_MAKE_EQUIV do not. This
allows a process with CAP_AUDIT_CONTROL to modify directory tree
watches and equivalence mappings even when the audit configuration
has been locked, undermining the purpose of the lock.
Add AUDIT_LOCKED checks to both commands.
Cc: stable@vger.kernel.org
Reviewed-by: Ricardo Robaina <rrobaina@redhat.com>
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Sergio Correia <scorreia@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
__audit_log_capset() records the effective capability set into the
inheritable field due to a copy-paste error. Every CAPSET audit
record therefore reports cap_pi (process inheritable) with the value
of cap_effective instead of cap_inheritable.
This silently corrupts audit data used for compliance and forensic
analysis: an attacker who modifies inheritable capabilities to
prepare for a privilege-escalating exec would have the change masked
in the audit trail.
The bug has been present since the original introduction of CAPSET
audit records in 2008.
Cc: stable@vger.kernel.org
Fixes: e68b75a027 ("When the capset syscall is used it is not possible for audit to record the actual capbilities being added/removed. This patch adds a new record type which emits the target pid and the eff, inh, and perm cap sets.")
Reviewed-by: Ricardo Robaina <rrobaina@redhat.com>
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Sergio Correia <scorreia@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pull probes fixes from Masami Hiramatsu:
- kprobes: skip non-symbol addresses in kprobe_add_ksym_blacklist()
Since the ftrace adds its NOPs at .kprobes.text section (which stores
an array), a wrong entry is added when loading a module which uses
"__kprobes" attribute.
To solve this, add "notrace" to __kprobes functions
- test_kprobes: clear kprobes between test runs
Clear all kprobes in the test program after running a test set,
because Kunit test can run several times
- fprobe: Fix unregister_fprobe() to wait for RCU grace period
Since the fprobe data structure is removed with hlist_del_rcu(), it
should wait for the RCU grace period. If the caller waits for RCU, we
can use the async variant (e.g. eBPF)
* tag 'probes-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fprobe: Fix unregister_fprobe() to wait for RCU grace period
test_kprobes: clear kprobes between test runs
kprobes: skip non-symbol addresses in kprobe_add_ksym_blacklist()
Jakub Kicinski says:
====================
net: shaper: fix various minor bugs
Fix various minor bugs in the net shaper API.
First 2 patches deal with ordering issues around inserting
and publishing new shapers. Shapers are inserted "tentatively"
and marked valid only after HW op succeeded, this used to
be slightly racy.
Only other patch of note is patch 8. We want to add a Netlink
policy check on the handle ID. This necessitates patch 7.
The rest are simple and self-explanatory.
v1: https://lore.kernel.org/20260506000628.1501691-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20260510192904.3987113-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net_shaper_parse_handle() does not enforce that the user provides
the handle ID. For NODE the ID defaults to UNSPEC for all other
cases it defaults to 0.
For NETDEV 0 is the only option. For QUEUE defaulting to 0 makes
less intuitive sense. Specifically because the behavior should
(IMHO) be the same for all cases where there may be more than
one ID (QUEUE and NODE).
We should either document this as intentional or reject.
I picked the latter with no strong conviction.
Fixes: 4b623f9f0f ("net-shapers: implement NL get operation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260510192904.3987113-11-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The NETDEV scope represents a singleton root shaper in the per-device
hierarchy. All code assumes NETDEV shapers have id 0:
net_shaper_default_parent() hardcodes parent->id = 0 when returning
the NETDEV parent for QUEUE/NODE children, and the UAPI documentation
describes NETDEV scope as "the main shaper" (singular, not plural).
Make sure we reject non-0 IDs.
Fixes: 4b623f9f0f ("net-shapers: implement NL get operation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260510192904.3987113-10-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
