"stdrng" is needed only in "FIPS mode". Therefore, make
crypto_stdrng_get_bytes() delegate to either the normal Linux RNG or to
"stdrng", depending on the current mode.
This will eliminate the need to built the SP800-90A DRBG and its
dependencies into CRYPTO_FIPS=n kernels.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that crypto_default_rng, crypto_get_default_rng(), and
crypto_put_default_rng() have no users outside crypto/rng.c itself,
unexport them and make them static.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the sequence of crypto_get_default_rng(),
crypto_rng_get_bytes(), and crypto_put_default_rng() with the equivalent
helper function crypto_stdrng_get_bytes().
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the sequence of crypto_get_default_rng(),
crypto_rng_get_bytes(), and crypto_put_default_rng() with the equivalent
helper function crypto_stdrng_get_bytes().
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the sequence of crypto_get_default_rng(),
crypto_rng_get_bytes(), and crypto_put_default_rng() with the equivalent
helper function crypto_stdrng_get_bytes().
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the sequence of crypto_get_default_rng(),
crypto_rng_get_bytes(), and crypto_put_default_rng() with the equivalent
helper function crypto_stdrng_get_bytes().
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the sequence of crypto_get_default_rng(),
crypto_rng_get_bytes(), and crypto_put_default_rng() with the equivalent
helper function crypto_stdrng_get_bytes().
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the sequence of crypto_get_default_rng(),
crypto_rng_get_bytes(), and crypto_put_default_rng() with the equivalent
helper function crypto_stdrng_get_bytes().
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All callers of crypto_get_default_rng() use the following sequence:
crypto_get_default_rng()
crypto_rng_get_bytes(crypto_default_rng, ...)
crypto_put_default_rng()
While it may have been intended that callers amortize the cost of
getting and putting the "default RNG" (i.e. "stdrng") over multiple
calls, in practice that optimization is never used. The callers just
want a function that gets random bytes from the "stdrng".
Therefore, add such a function: crypto_stdrng_get_bytes().
Importantly, this decouples the callers from the crypto_rng API. That
allows a later commit to make this function simply call
get_random_bytes_wait() unless the kernel is in "FIPS mode".
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cpu counter used to compute the IAA device index is reset to zero
at the start of each NUMA node iteration. This causes CPUs on every
node to map starting from IAA index 0 instead of continuing from the
previous node's last index. On multi-node systems, this results in all
nodes mapping their CPUs to the same initial set of IAA devices,
leaving higher-indexed devices unused.
Move the cpu counter initialization before the for_each_node_with_cpus()
loop so that the IAA index computation accumulates correctly across all
nodes.
Fixes: 714ca27e9b ("crypto: iaa - Optimize rebalance_wq_table()")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace scnprintf() with sysfs_emit() in the three RAS error counter
sysfs show callbacks. sysfs_emit() is the recommended API for sysfs show
functions as per Documentation/filesystems/sysfs.rst; it enforces the
PAGE_SIZE limit implicitly, removing the need to pass it explicitly.
Signed-off-by: Atharv Dubey <atharvd440@gmail.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ADF_RAS_ERR_CTR_READ() expands to atomic_read(), which returns int.
The local variable 'counter' was declared as 'unsigned long', causing
a type mismatch on the assignment. The format specifier '%ld' was
consequently wrong in two ways: wrong length modifier and wrong
signedness.
Use int to match the return type of atomic_read() and update the
format specifier to '%d' accordingly.
Fixes: 532d7f6bc4 ("crypto: qat - add error counters")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
qat_comp_alg_init_tfm() acquires a compression instance via
qat_compression_get_instance_node() before calling qat_comp_build_ctx()
to initialize the compression context. If qat_comp_build_ctx() fails, the
function returns an error without releasing the compression instance,
causing a resource leak.
When qat_comp_build_ctx() fails, release the compression instance with
qat_compression_put_instance() and clear the context to avoid leaving a
stale reference to the released instance.
The issue was introduced when build_deflate_ctx() (which always returned
void) was replaced by qat_comp_build_ctx() (which can return an error)
without adding error handling for the failure path.
Fixes: cd0e7160f8 ("crypto: qat - refactor compression template logic")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Laurent M Coquerel <laurent.m.coquerel@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace snprintf("%s", ...) with the faster and more direct strscpy().
Check if the return value is less than 0 to detect string truncation.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The get_ae_mask() function only disables individual engines based on
the fuse register, but engines are organized in clusters of 4. If the
lead engine of a cluster is fused off, the entire cluster must be
disabled.
Replace the single bitmask inversion with explicit test_bit() checks
on the lead engine of each group, disabling the full ADF_AE_GROUP
when the lead bit is set.
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Fixes: fcf60f4bcf ("crypto: qat - add support for 420xx devices")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The get_ae_mask() function only disables individual engines based on
the fuse register, but engines are organized in clusters of 4. If the
lead engine of a cluster is fused off, the entire cluster must be
disabled.
Replace the single bitmask inversion with explicit test_bit() checks
on the lead engine of each group, disabling the full ADF_AE_GROUP
when the lead bit is set.
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Fixes: 8c8268166e ("crypto: qat - add qat_4xxx driver")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Test vectors were generated starting from existing CBC(AES) test vectors
(RFC3602, NIST SP800-38A) and adding HMAC(MD5) computed with Python
script. Then, the results were double-checked on Mediatek MT7981 (safexcel)
and NXP P2020 (talitos). Both platforms pass self-tests.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During packet transmission, if the system is under heavy load,
the hardware might complete processing the packet and free the
request memory (req) before the transmission function finishes.
If the software subsequently accesses this req, a use-after-free
error will occur. The qp_ctx memory exists throughout the packet
sending process, so replace the req with the qp_ctx.
Fixes: f0ae287c50 ("crypto: hisilicon/sec2 - implement full backlog mode for sec")
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Many functions in cryptd.c no longer have any caller. Remove them.
Also remove several associated structs and includes. Finally, inline
cryptd_shash_desc() into its only caller, allowing it to be removed too.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Econet SoCs feature an integrated EIP93 in revision 3.0p1. It is identical
to the one used by the Airoha AN7581 and the MediaTek MT7621. Ahmed reports
that the EN7528 passes testmgr's self-tests. This driver should also work
on other little endian Econet SoCs.
CC: Ahmed Naseef <naseefkm@gmail.com>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Tested-by: Ahmed Naseef <naseefkm@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
AES-CCM is an AEAD algorithm supporting both encryption and
authentication of data. This patch introduces support for AES-CCM AEAD
algorithm in the DTHEv2 driver.
Signed-off-by: T Pratham <t-pratham@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
AES-GCM is an AEAD algorithm supporting both encryption and
authentication of data. This patch introduces support for AES-GCM as the
first AEAD algorithm supported by the DTHEv2 driver.
Signed-off-by: T Pratham <t-pratham@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use list_first_entry_or_null() to simplify stm32_cryp_find_dev() and
remove the now-unused local variable 'struct stm32_cryp *tmp'.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use list_first_entry_or_null() to simplify stm32_hash_find_dev() and
remove the now-unused local variable 'struct stm32_hash_dev *tmp'.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Test vectors were generated starting from existing RFC3686(CTR(AES)) test
vectors and adding HMAC(MD5) computed with software implementation.
Then, the results were double-checked on Mediatek MT7986 (safexcel).
Platform pass self-tests.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Anti-Rollback (ARB) is a QAT GEN6 hardware feature that prevents loading
firmware with a Security Version Number (SVN) lower than an authorized
minimum. This protects against downgrade attacks by ensuring that only
firmware at or above a committed SVN can run on the acceleration device.
During firmware loading, the driver checks the SVN validation status via
a hardware CSR. If the check reports a failure, firmware authentication
is aborted. If it reports a retry status, the driver reissues the
authentication command up to a maximum number of retries.
Extend the firmware admin interface with two new messages,
ICP_QAT_FW_SVN_READ and ICP_QAT_FW_SVN_COMMIT, to query and commit the
SVN, respectively. Integrate the SVN check into the firmware
authentication path in qat_uclo.c so the driver can react to
anti-rollback status during device bring-up.
Expose SVN information to userspace via a new sysfs attribute group,
qat_svn, under the PCI device directory. The group provides read-only
attributes for the active, enforced minimum, and permanent minimum SVN
values, as well as a write-only commit attribute that allows a system
administrator to commit the currently active SVN as the new authorized
minimum.
This is based on earlier work by Ciunas Bennett.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use print_hex_dump_devel() for dumping sensitive HMAC key bytes in
hash_digest_key() to avoid leaking secrets at runtime when
CONFIG_DYNAMIC_DEBUG is enabled.
Fixes: 045e36780f ("crypto: caam - ahash hmac support")
Fixes: 3f16f6c9d6 ("crypto: caam/qi2 - add support for ahash algorithms")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the __counted_by() compiler attribute to the flexible array member
'group' to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace memset() followed by memcpy() with memcpy_and_pad() to simplify
the code and to write to 'cache' only once.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace multiple for loops with calls to crypto_unregister_ahashes() and
crypto_unregister_skciphers().
If crypto_register_skcipher() fails in s5p_aes_probe(), log the error
directly instead of checking 'i < ARRAY_SIZE(algs)' later. Also drop
now-unused local index variables. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Document the anonymous SKCIPHER_ALG_COMMON and COMP_ALG_COMMON struct
members in skcipher_alg, scomp_alg, and acomp_alg, following the
existing pattern used by HASH_ALG_COMMON in shash_alg.
This fixes the following kernel-doc warnings:
include/crypto/skcipher.h:166: struct member 'SKCIPHER_ALG_COMMON' not described in 'skcipher_alg'
include/crypto/internal/scompress.h:39: struct member 'COMP_ALG_COMMON' not described in 'scomp_alg'
include/crypto/internal/acompress.h:55: struct member 'COMP_ALG_COMMON' not described in 'acomp_alg'
Signed-off-by: Kit Dallege <xaum.io@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the skcipher algorithm support from crypto/simd.c. It is no
longer used, and it is unlikely to gain any new user in the future,
given the performance issues with this code.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Unregister the hwrng to prevent new ->read() calls and flush the Atmel
I2C workqueue before teardown to prevent a potential UAF if a queued
callback runs while the device is being removed.
Drop the early return to ensure sysfs entries are removed and
->hwrng.priv is freed, preventing a memory leak.
Fixes: da001fb651 ("crypto: atmel-i2c - add support for SHA204A random number generator")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
syzbot reported the following warning:
DEAD callback error for CPU1
WARNING: kernel/cpu.c:1463 at _cpu_down+0x759/0x1020 kernel/cpu.c:1463, CPU#0: syz.0.1960/14614
at commit 4ae12d8bd9 ("Merge tag 'kbuild-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux")
which tglx traced to padata_cpu_dead() given it's the only
sub-CPUHP_TEARDOWN_CPU callback that returns an error.
Failure isn't allowed in hotplug states before CPUHP_TEARDOWN_CPU
so move the CPU offline callback to the ONLINE section where failure is
possible.
Fixes: 894c9ef978 ("padata: validate cpumask without removed CPU during offline")
Reported-by: syzbot+123e1b70473ce213f3af@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/69af0a05.050a0220.310d8.002f.GAE@google.com/
Debugged-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The accelerator device supports usage statistics. This patch enables
obtaining the accelerator's usage through the "dev_usage" file.
The returned number expressed as a percentage as a percentage.
Signed-off-by: Zongyu Wu <wuzongyu1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Mark internal fields as "private:" so that kernel-doc comments
are not needed for them, eliminating kernel-doc warnings:
Warning: include/linux/hw_random.h:54 struct member 'list' not described
in 'hwrng'
Warning: include/linux/hw_random.h:54 struct member 'ref' not described
in 'hwrng'
Warning: include/linux/hw_random.h:54 struct member 'cleanup_work' not
described in 'hwrng'
Warning: include/linux/hw_random.h:54 struct member 'cleanup_done' not
described in 'hwrng'
Warning: include/linux/hw_random.h:54 struct member 'dying' not described
in 'hwrng'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the scomp conversion, nx842_crypto_alloc_ctx() allocates the
context separately, but nx842_crypto_free_ctx() never releases it. Add
the missing kfree(ctx) to nx842_crypto_free_ctx(), and reuse
nx842_crypto_free_ctx() in the allocation error path.
Fixes: 980b5705f4 ("crypto: nx - Migrate to scomp API")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The bounce buffers are allocated with __get_free_pages() using
BOUNCE_BUFFER_ORDER (order 2 = 4 pages), but both the allocation error
path and nx842_crypto_free_ctx() release the buffers with free_page().
Use free_pages() with the matching order instead.
Fixes: ed70b479c2 ("crypto: nx - add hardware 842 crypto comp alg")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ensure the device supports XTS and GCM with 'has_xts' and 'has_gcm'
before unregistering algorithms when XTS or authenc registration fails,
which would trigger a WARN in crypto_unregister_alg().
Currently, with the capabilities defined in atmel_aes_get_cap(), this
bug cannot happen because all devices that support XTS and authenc also
support GCM, but the error handling should still be correct regardless
of hardware capabilities.
Fixes: d52db5188a ("crypto: atmel-aes - add support to the XTS mode")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add wireless mode support for QAT GEN6 devices.
When the WCP_WAT fuse bit is clear, the device operates in wireless
cipher mode (wcy_mode). In this mode all accelerator engines load the
wireless firmware and service configuration via 'cfg_services' sysfs
attribute is restricted to 'sym' only.
The get_accel_cap() function is extended to report wireless-specific
capabilities (ZUC, ZUC-256, 5G, extended algorithm chaining) gated by
their respective slice-disable fuse bits. The set_ssm_wdtimer() function
is updated to configure WCP (wireless cipher) and WAT (wireless
authentication) watchdog timers. The adf_gen6_cfg_dev_init() function is
updated to use adf_6xxx_is_wcy() to enforce sym-only service selection
for WCY devices during initialization.
Co-developed-by: Aviraj Cj <aviraj.cj@intel.com>
Signed-off-by: Aviraj Cj <aviraj.cj@intel.com>
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
atmel_aes_buff_init() allocates 4 pages using __get_free_pages() with
ATMEL_AES_BUFFER_ORDER, but atmel_aes_buff_cleanup() frees only the
first page using free_page(), leaking the remaining 3 pages. Use
free_pages() with ATMEL_AES_BUFFER_ORDER to fix the memory leak.
Fixes: bbe628ed89 ("crypto: atmel-aes - improve performances of data transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Softirqs must be disabled when calling the finalization fucntion on
a request.
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
