Currently, in ieee80211_assign_beacon() mbssid count is updated as link's
bssid_indicator. mbssid count is the total number of MBSSID elements in
the beacon instead of Max BSSID indicator of the Multiple BSS set.
This will result in drivers obtaining an invalid bssid_indicator for BSSes
in a Multiple BSS set.
Fix this by updating link's bssid_indicator from MBSSID element for
Transmitting BSS and update the same for all of its Non-Transmitting BSSes.
Fixes: dde78aa520 ("mac80211: update bssid_indicator in ieee80211_assign_beacon")
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20250530040940.3188537-1-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, in multi-radio wiphy cases, if one radio is operating on a DFS
channel, -EBUSY is returned even when a scan is requested on a different
radio. Because of this, an MLD AP with one radio (link) on a DFS channel
and Automatic Channel Selection (ACS) on another radio (link) cannot be
brought up.
In multi-radio wiphy cases, multiple radios are grouped under a single
wiphy. Hence, if a radio is operating on a DFS channel and a scan is
requested on a different radio of the same wiphy, the scan can be allowed
simultaneously without impacting the DFS operations.
Add logic to check the underlying radio used for the requested scan. If the
radio on which DFS is already running is not being used, allow the scan
operation; otherwise, return -EBUSY.
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250527-mlo-dfs-acs-v2-3-92c2f37c81d9@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, in multi-radio wiphy cases, if a scan is ongoing on one radio,
-EBUSY is returned when DFS or a channel switch is initiated on another
radio. Because of this, an MLD AP with one radio (link) in an ongoing scan
cannot initiate DFS or a channel switch on another radio (link).
In multi-radio wiphy cases, multiple radios are grouped under a single
wiphy. Hence, if a scan is ongoing on one underlying radio and DFS or a
channel switch is requested on a different underlying radio of the same
wiphy, these operations can be allowed simultaneously.
Add logic to check the underlying radio used for the ongoing scan. If the
radio on which DFS or a channel switch is requested is not being used for
the scan, allow the operation; otherwise, return -EBUSY.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250527-mlo-dfs-acs-v2-2-92c2f37c81d9@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add utility API cfg80211_get_radio_idx_by_chan() to retrieve the radio
index corresponding to a given channel in a multi-radio wiphy.
This utility function can be used when we want to check the radio-specific
data for a channel in a multi-radio wiphy. For example, it can help
determine the radio index required to handle a scan request. This index
can then be used to decide whether the scan can proceed without
interfering with ongoing DFS operations on another radio.
Signed-off-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250527-mlo-dfs-acs-v2-1-92c2f37c81d9@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Drivers that support Tx power insertion could examine the outgoing Radio
measurement packet and depending on the packet type, the driver can
insert specific data fields in it. These action field values will help
drivers classify the action code within the Radio Measurement action
packet.
These action fields are defined in IEEE 802.11-2024 - Table 9-470, Radio
Measurement Action field values.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250528-add_rrm_action_code-v1-1-6b7c78b5bbaf@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless.
The ath12k fix to avoid FW crashes requires adding support for a
number of new FW commands so it's quite large in terms of LoC. The
rest is relatively small.
Current release - fix to a fix:
- ptp: fix breakage after ptp_vclock_in_use() rework
Current release - regressions:
- openvswitch: allocate struct ovs_pcpu_storage dynamically, static
allocation may exhaust module loader limit on smaller systems
Previous releases - regressions:
- tcp: fix tcp_packet_delayed() for peers with no selective ACK
support
Previous releases - always broken:
- wifi: ath12k: don't activate more links than firmware supports
- tcp: make sure sockets open via passive TFO have valid NAPI ID
- eth: bnxt_en: update MRU and RSS table of RSS contexts on queue
reset, prevent Rx queues from silently hanging after queue reset
- NFC: uart: set tty->disc_data only in success path"
* tag 'net-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits)
net: airoha: Differentiate hwfd buffer size for QDMA0 and QDMA1
net: airoha: Compute number of descriptors according to reserved memory size
tools: ynl: fix mixing ops and notifications on one socket
net: atm: fix /proc/net/atm/lec handling
net: atm: add lec_mutex
mlxbf_gige: return EPROBE_DEFER if PHY IRQ is not available
net: airoha: Always check return value from airoha_ppe_foe_get_entry()
NFC: nci: uart: Set tty->disc_data only in success path
calipso: Fix null-ptr-deref in calipso_req_{set,del}attr().
MAINTAINERS: Remove Shannon Nelson from MAINTAINERS file
net: lan743x: fix potential out-of-bounds write in lan743x_ptp_io_event_clock_get()
eth: fbnic: avoid double free when failing to DMA-map FW msg
tcp: fix passive TFO socket having invalid NAPI ID
selftests: net: add test for passive TFO socket NAPI ID
selftests: net: add passive TFO test binary
selftests: netdevsim: improve lib.sh include in peer.sh
tipc: fix null-ptr-deref when acquiring remote ip of ethernet bearer
Octeontx2-pf: Fix Backpresure configuration
net: ftgmac100: select FIXED_PHY
net: ethtool: remove duplicate defines for family info
...
EN7581 SoC allows configuring the size and the number of buffers in
hwfd payload queue for both QDMA0 and QDMA1.
In order to reduce the required DRAM used for hwfd buffers queues and
decrease the memory footprint, differentiate hwfd buffer size for QDMA0
and QDMA1 and reduce hwfd buffer size to 1KB for QDMA1 (WAN) while
maintaining 2KB for QDMA0 (LAN).
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250619-airoha-hw-num-desc-v4-2-49600a9b319a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg says:
====================
More fixes:
- ath12k
- avoid busy-waiting
- activate correct number of links
- iwlwifi
- iwldvm regression (lots of warnings)
- iwlmld merge damage regression (crash)
- fix build with some old gcc versions
- carl9170: don't talk to device w/o FW [syzbot]
- ath6kl: remove bad FW WARN [syzbot]
- ieee80211: use variable-length arrays [syzbot]
- mac80211
- remove WARN on delayed beacon update [syzbot]
- drop OCB frames with invalid source [syzbot]
* tag 'wireless-2025-06-18' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: Fix incorrect logic on cmd_ver range checking
wifi: iwlwifi: dvm: restore n_no_reclaim_cmds setting
wifi: iwlwifi: cfg: Limit cb_size to valid range
wifi: iwlwifi: restore missing initialization of async_handlers_list (again)
wifi: ath6kl: remove WARN on bad firmware input
wifi: carl9170: do not ping device which has failed to load firmware
wifi: ath12k: don't wait when there is no vdev started
wifi: ath12k: don't use static variables in ath12k_wmi_fw_stats_process()
wifi: ath12k: avoid burning CPU while waiting for firmware stats
wifi: ath12k: fix documentation on firmware stats
wifi: ath12k: don't activate more links than firmware supports
wifi: ath12k: update link active in case two links fall on the same MAC
wifi: ath12k: support WMI_MLO_LINK_SET_ACTIVE_CMDID command
wifi: ath12k: update freq range for each hardware mode
wifi: ath12k: parse and save sbs_lower_band_end_freq from WMI_SERVICE_READY_EXT2_EVENTID event
wifi: ath12k: parse and save hardware mode info from WMI_SERVICE_READY_EXT_EVENTID event for later use
wifi: ath12k: Avoid CPU busy-wait by handling VDEV_STAT and BCN_STAT
wifi: mac80211: don't WARN for late channel/color switch
wifi: mac80211: drop invalid source address OCB frames
wifi: remove zero-length arrays
====================
Link: https://patch.msgid.link/20250618210642.35805-6-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The multi message support loosened the connection between the request
and response handling, as we can now submit multiple requests before
we start processing responses. Passing the attr set to NlMsgs decoding
no longer makes sense (if it ever did), attr set may differ message
by messsage. Isolate the part of decoding responsible for attr-set
specific interpretation and call it once we identified the correct op.
Without this fix performing SET operation on an ethtool socket, while
being subscribed to notifications causes:
# File "tools/net/ynl/pyynl/lib/ynl.py", line 1096, in _op
# Exception| return self._ops(ops)[0]
# Exception| ~~~~~~~~~^^^^^
# File "tools/net/ynl/pyynl/lib/ynl.py", line 1040, in _ops
# Exception| nms = NlMsgs(reply, attr_space=op.attr_set)
# Exception| ^^^^^^^^^^^
The value of op we use on line 1040 is stale, it comes form the previous
loop. If a notification comes before a response we will update op to None
and the next iteration thru the loop will break with the trace above.
Fixes: 6fda63c45f ("tools/net/ynl: fix cli.py --subscribe feature")
Fixes: ba8be00f68 ("tools/net/ynl: Add multi message support to ynl")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250618171746.1201403-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
net: atm: protect dev_lec[] with a mutex
Based on an initial syzbot report.
First patch is adding lec_mutex to address the report.
Second patch protects /proc/net/atm/lec operations.
We probably should delete this driver, it seems quite broken.
====================
Link: https://patch.msgid.link/20250618140844.1686882-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The message "Error getting PHY irq. Use polling instead"
is emitted when the mlxbf_gige driver is loaded by the
kernel before the associated gpio-mlxbf driver, and thus
the call to get the PHY IRQ fails since it is not yet
available. The driver probe() must return -EPROBE_DEFER
if acpi_dev_gpio_irq_get_by() returns the same.
Fixes: 6c2a6ddca7 ("net: mellanox: mlxbf_gige: Replace non-standard interrupt handling")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250618135902.346-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Setting tty->disc_data before opening the NCI device means we need to
clean it up on error paths. This also opens some short window if device
starts sending data, even before NCIUARTSETDRIVER IOCTL succeeded
(broken hardware?). Close the window by exposing tty->disc_data only on
the success path, when opening of the NCI device and try_module_get()
succeeds.
The code differs in error path in one aspect: tty->disc_data won't be
ever assigned thus NULL-ified. This however should not be relevant
difference, because of "tty->disc_data=NULL" in nci_uart_tty_open().
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Fixes: 9961127d4b ("NFC: nci: add generic uart support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250618073649.25049-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Brett Creeley is taking ownership of AMD/Pensando drivers while I wander
off into the sunset with my retirement this month. I'll still keep an
eye out on a few topics for awhile, and maybe do some free-lance work in
the future.
Meanwhile, thank you all for the fun and support and the many learning
opportunities :-).
Special thanks go to DaveM for merging my first patch long ago, the big
ionic patchset a few years ago, and my last patchset last week.
Redirect things to a non-corporate account.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20250616224437.56581-1-shannon.nelson@amd.com
[Jakub: squash in the .mailmap update]
Signed-off-by: Shannon Nelson <sln@onemain.com>
Link: https://patch.msgid.link/20250619010603.1173141-1-sln@onemain.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-06-18
All 10 patches are by Geert Uytterhoeven, target the rcar_canfd
driver, first cleanup/refactor the driver and then add support for
Transceiver Delay Compensation.
* tag 'linux-can-next-for-6.17-20250618' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: rcar_canfd: Add support for Transceiver Delay Compensation
can: rcar_canfd: Return early in rcar_canfd_set_bittiming() when not FD
can: rcar_canfd: Share config code in rcar_canfd_set_bittiming()
can: rcar_canfd: Rename rcar_canfd_setrnc() to rcar_canfd_set_rnc()
can: rcar_canfd: Repurpose f_dcfg base for other registers
can: rcar_canfd: Simplify data access in rcar_canfd_{ge,pu}t_data()
can: rcar_canfd: Add helper variable dev to rcar_canfd_reset_controller()
can: rcar_canfd: Add helper variable ndev to rcar_canfd_rx_pkt()
can: rcar_canfd: Remove bittiming debug prints
can: rcar_canfd: Consistently use ndev for net_device pointers
====================
Link: https://patch.msgid.link/20250618092336.2175168-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before calling lan743x_ptp_io_event_clock_get(), the 'channel' value
is checked against the maximum value of PCI11X1X_PTP_IO_MAX_CHANNELS(8).
This seems correct and aligns with the PTP interrupt status register
(PTP_INT_STS) specifications.
However, lan743x_ptp_io_event_clock_get() writes to ptp->extts[] with
only LAN743X_PTP_N_EXTTS(4) elements, using channel as an index:
lan743x_ptp_io_event_clock_get(..., u8 channel,...)
{
...
/* Update Local timestamp */
extts = &ptp->extts[channel];
extts->ts.tv_sec = sec;
...
}
To avoid an out-of-bounds write and utilize all the supported GPIO
inputs, set LAN743X_PTP_N_EXTTS to 8.
Detected using the static analysis tool - Svace.
Fixes: 60942c397a ("net: lan743x: Add support for PTP-IO Event Input External Timestamp (extts)")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://patch.msgid.link/20250616113743.36284-1-aleksei.kodanev@bell-sw.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hangbin Liu says:
====================
selftests: net: use slowwait to make sure setup finished
The two updated tests sometimes failed because the network setup hadn't
completed. Used slowwait to ensure the setup finished and the tests
always passed. I ran both tests 50 times, and all of them passed.
====================
Link: https://patch.msgid.link/20250617105101.433718-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sometimes the vxlan vnifiltering test failed on slow machines due to
network setup not finished. e.g.
TEST: VM connectivity over vnifiltering vxlan (ipv4 default rdst) [ OK ]
TEST: VM connectivity over vnifiltering vxlan (ipv6 default rdst) [FAIL]
Let's use slowwait to make sure the connection is finished.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250617105101.433718-3-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The vrf_route_leaking test occasionally fails due to connectivity issues
in our testing environment. A sample failure message shows that the ping
check fails intermittently
PING 2001:db8:16:2::2 (2001:db8:16:2::2) 56 data bytes
--- 2001:db8:16:2::2 ping statistics ---
1 packets transmitted, 0 received, 100% packet loss, time 0ms
TEST: Basic IPv6 connectivity [FAIL]
This is likely due to insufficient wait time on slower machines. To address
this, switch to using slowwait, which provides a longer and more reliable
wait for setup completion.
Before this change, the test failed 3 out of 10 times. After applying this
fix, the test was run 30 times without any failure.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250617105101.433718-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Erni Sri Satya Vennela says:
====================
Support bandwidth clamping in mana using net shapers
This patchset introduces hardware-backed bandwidth rate limiting
for MANA NICs via the net_shaper_ops interface, enabling efficient and
fine-grained traffic shaping directly on the device.
Previously, MANA lacked a mechanism for user-configurable bandwidth
control. With this addition, users can now configure shaping parameters,
allowing better traffic management and performance isolation.
The implementation includes the net_shaper_ops callbacks in the MANA
driver and supports one shaper per vport. Add shaping support via
mana_set_bw_clamp(), allowing the configuration of bandwidth rates
in 100 Mbps increments (minimum 100 Mbps). The driver validates input
and rejects unsupported values. On failure, it restores the previous
configuration which is queried using mana_query_link_cfg() or
retains the current state.
To prevent potential deadlocks introduced by net_shaper_ops, switch to
_locked variants of NAPI APIs when netdevops_lock is held during
VF setup and teardown.
Also, Add support for ethtool get_link_ksettings to report the maximum
link speed supported by the SKU in mbps.
These APIs when invoked on hardware that are older or that do
not support these APIs, the speed would be reported as UNKNOWN and
the net-shaper calls to set speed would fail.
====================
Link: https://patch.msgid.link/1750144656-2021-1-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Allow mana ethtool get_link_ksettings operation to report
the maximum speed supported by the SKU in mbps.
The driver retrieves this information by issuing a
HWC command to the hardware via mana_query_link_cfg(),
which retrieves the SKU's maximum supported speed.
These APIs when invoked on hardware that are older/do
not support these APIs, the speed would be reported as UNKNOWN.
Before:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes
After:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 16000Mb/s
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-4-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce support for net_shaper_ops in the MANA driver,
enabling configuration of rate limiting on the MANA NIC.
To apply rate limiting, the driver issues a HWC command via
mana_set_bw_clamp() and updates the corresponding shaper object
in the net_shaper cache. If an error occurs during this process,
the driver restores the previous speed by querying the current link
configuration using mana_query_link_cfg().
The minimum supported bandwidth is 100 Mbps, and only values that are
exact multiples of 100 Mbps are allowed. Any other values are rejected.
To remove a shaper, the driver resets the bandwidth to the maximum
supported by the SKU using mana_set_bw_clamp() and clears the
associated cache entry. If an error occurs during this process,
the shaper details are retained.
On the hardware that does not support these APIs, the net-shaper
calls to set speed would fail.
Set the speed:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do set --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev", "id":'$ID' },
"bw-max": 200000000 }'
Get the shaper details:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do get --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev", "id":'$ID' }}'
> {'bw-max': 200000000,
> 'handle': {'scope': 'netdev'},
> 'ifindex': $IFINDEX,
> 'metric': 'bps'}
Delete the shaper object:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do delete --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev","id":'$ID' }}'
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-3-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When net_shaper_ops are enabled for MANA, netdev_ops_lock
becomes active.
MANA VF setup/teardown by netvsc follows this call chain:
netvsc_vf_setup()
dev_change_flags()
...
__dev_open() OR __dev_close()
dev_change_flags() holds the netdev mutex via netdev_lock_ops.
Meanwhile, mana_create_txq() and mana_create_rxq() in mana_open()
path call NAPI APIs (netif_napi_add_tx(), netif_napi_add_weight(),
napi_enable()), which also try to acquire the same lock, risking
deadlock.
Similarly in the teardown path (mana_close()), netif_napi_disable()
and netif_napi_del(), contend for the same lock.
Switch to the _locked variants of these APIs to avoid deadlocks
when the netdev_ops_lock is held.
Fixes: d4c22ec680 ("net: hold netdev instance lock during ndo_open/ndo_stop")
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-2-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since commit 3e6a0243ff ("gre: Fix again IPv6 link-local address
generation."), addrconf_gre_config() has stopped handling IP6GRE
devices specially and just calls the regular addrconf_addr_gen()
function to create their link-local IPv6 addresses.
We can thus avoid using addrconf_gre_config() for IP6GRE devices and
use the normal IPv6 initialisation path instead (that is, jump directly
to addrconf_dev_config() in addrconf_init_auto_addrs()).
See commit 3e6a0243ff ("gre: Fix again IPv6 link-local address
generation.") for a deeper explanation on how and why GRE devices
started handling their IPv6 link-local address generation specially,
why it was a problem, and why this is not even necessary in most cases
(especially for GRE over IPv6).
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/a9144be9c7ec3cf09f25becae5e8fdf141fde9f6.1750075076.git.gnault@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kory Maincent says:
====================
Add support for PSE budget evaluation strategy
This series brings support for budget evaluation strategy in the PSE
subsystem. PSE controllers can set priorities to decide which ports should
be turned off in case of special events like over-current.
This patch series adds support for two budget evaluation strategy.
1. Static Method:
This method involves distributing power based on PD classification.
It’s straightforward and stable, the PSE core keeping track of the
budget and subtracting the power requested by each PD’s class.
Advantages: Every PD gets its promised power at any time, which
guarantees reliability.
Disadvantages: PD classification steps are large, meaning devices
request much more power than they actually need. As a result, the power
supply may only operate at, say, 50% capacity, which is inefficient and
wastes money.
2. Dynamic Method:
To address the inefficiencies of the static method, vendors like
Microchip have introduced dynamic power budgeting, as seen in the
PD692x0 firmware. This method monitors the current consumption per port
and subtracts it from the available power budget. When the budget is
exceeded, lower-priority ports are shut down.
Advantages: This method optimizes resource utilization, saving costs.
Disadvantages: Low-priority devices may experience instability.
The UAPI allows adding support for software port priority mode managed from
userspace later if needed.
Patches 1-2: Add support for interrupt event report in PSE core, ethtool
and ethtool specs.
Patch 3: Adds support for interrupt and event report in TPS23881 driver.
Patches 4,5: Add support for PSE power domain in PSE core and ethtool.
Patches 6-8: Add support for budget evaluation strategy in PSE core,
ethtool and ethtool specs.
Patches 9-11: Add support for port priority and power supplies in PD692x0
drivers.
Patches 12,13: Add support for port priority in TPS23881 drivers.
====================
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-0-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an interrupt property to the device tree bindings for the TI TPS23881
PSE controller. The interrupt is primarily used to detect classification
and disconnection events, which are essential for managing the PSE
controller in compliance with the PoE standard.
Interrupt support is essential for the proper functioning of the TPS23881
controller. Without it, after a power-on (PWON), the controller will
no longer perform detection and classification. This could lead to
potential hazards, such as connecting a non-PoE device after a PoE device,
which might result in magic smoke.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-13-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch enhances PSE callbacks by introducing support for the static
port priority feature. It extends interrupt management to handle and report
detection, classification, and disconnection events. Additionally, it
introduces the pi_get_pw_req() callback, which provides information about
the power requested by the Powered Devices.
Interrupt support is essential for the proper functioning of the TPS23881
controller. Without it, after a power-on (PWON), the controller will
no longer perform detection and classification. This could lead to
potential hazards, such as connecting a non-PoE device after a PoE device,
which might result in magic smoke.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-12-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch introduces the ability to configure the PSE PI budget evaluation
strategies. Budget evaluation strategies is utilized by PSE controllers to
determine which ports to turn off first in scenarios such as power budget
exceedance.
The pis_prio_max value is used to define the maximum priority level
supported by the controller. Both the current priority and the maximum
priority are exposed to the user through the pse_ethtool_get_status call.
This patch add support for two mode of budget evaluation strategies.
1. Static Method:
This method involves distributing power based on PD classification.
It’s straightforward and stable, the PSE core keeping track of the
budget and subtracting the power requested by each PD’s class.
Advantages: Every PD gets its promised power at any time, which
guarantees reliability.
Disadvantages: PD classification steps are large, meaning devices
request much more power than they actually need. As a result, the power
supply may only operate at, say, 50% capacity, which is inefficient and
wastes money.
Priority max value is matching the number of PSE PIs within the PSE.
2. Dynamic Method:
To address the inefficiencies of the static method, vendors like
Microchip have introduced dynamic power budgeting, as seen in the
PD692x0 firmware. This method monitors the current consumption per port
and subtracts it from the available power budget. When the budget is
exceeded, lower-priority ports are shut down.
Advantages: This method optimizes resource utilization, saving costs.
Disadvantages: Low-priority devices may experience instability.
Priority max value is set by the PSE controller driver.
For now, budget evaluation methods are not configurable and cannot be
mixed. They are hardcoded in the PSE driver itself, as no current PSE
controller supports both methods.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-7-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce PSE power domain support as groundwork for upcoming port
priority features. Multiple PSE PIs can now be grouped under a single
PSE power domain, enabling future enhancements like defining available
power budgets, port priority modes, and disconnection policies. This
setup will allow the system to assess whether activating a port would
exceed the available power budget, preventing over-budget states
proactively.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-4-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for reporting PSE events via ethtool notifications,
introduce an attached_phydev field in the pse_control structure.
This field stores the phy_device associated with the PSE PI,
ensuring that notifications are sent to the correct network
interface.
The attached_phydev pointer is directly tied to the PHY lifecycle. It
is set when the PHY is registered and cleared when the PHY is removed.
There is no need to use a refcount, as doing so could interfere with
the PHY removal process.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-1-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
