sockopt-fastopen-key.pkt does not have the non-experimental
version, so the Experimental version is converted, FOEXP -> FO.
The test sets net.ipv4.tcp_fastopen_key=0-0-0-0 and instead
sets another key via setsockopt(TCP_FASTOPEN_KEY).
The first listener generates a valid cookie in response to TFO
option without cookie, and the second listner creates a TFO socket
using the valid cookie.
TCP_FASTOPEN_KEY is adjusted to use the common key in default.sh
so that we can use TFO_COOKIE and support dualstack. Similarly,
TFO_COOKIE_ZERO for the 0-0-0-0 key is defined.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250927213022.1850048-13-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This imports the non-experimental version of opt34/*-trigger-rst.pkt.
| accept() | SYN data |
-----------------------------------+----------+----------+
listener-closed-trigger-rst.pkt | no | unread |
unread-data-closed-trigger-rst.pkt | yes | unread |
Both files test that close()ing a SYN_RECV socket with unread SYN data
triggers RST.
The files are renamed to have the common prefix, trigger-rst.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250927213022.1850048-11-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This imports the non-experimental version of opt34/reset-*.pkt.
| Child | RST | sk_err |
---------------------------------+---------+-------------------------------+---------+
reset-after-accept.pkt | TFO | after accept(), SYN_RECV | read() |
reset-close-with-unread-data.pkt | TFO | after accept(), SYN_RECV | write() |
reset-before-accept.pkt | TFO | before accept(), SYN_RECV | read() |
reset-non-tfo-socket.pkt | non-TFO | before accept(), ESTABLISHED | write() |
The first 3 files test scenarios where a SYN_RECV socket receives RST
before/after accept() and data in SYN must be read() without error,
but the following read() or fist write() will return ECONNRESET.
The last test is similar but with non-TFO socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250927213022.1850048-10-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This imports the non-experimental version of icmp-before-accept.pkt.
This file tests the scenario where an ICMP unreachable packet for a
not-yet-accept()ed socket changes its state to TCP_CLOSE, but the
SYN data must be read without error, and the following read() returns
EHOSTUNREACH.
Note that this test support only IPv4 as icmp is used.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250927213022.1850048-9-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only difference between non-experimental vs experimental TFO
option handling is SYN+ACK generation.
When tcp_parse_fastopen_option() parses a TFO option, it sets
tcp_fastopen_cookie.exp to false if the option number is 34,
and true if 255.
The value is carried to tcp_options_write() to generate a TFO option
with the same option number.
Other than that, all the TFO handling is the same and the kernel must
generate the same cookie regardless of the option number.
Let's add a test for the handling so that we can consolidate
fastopen/server/ tests and fastopen/server/opt34 tests.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250927213022.1850048-7-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This imports basic TFO server tests from google/packetdrill.
The repository has two versions of tests for most scenarios; one uses
the non-experimental option (34), and the other uses the experimental
option (255) with 0xF989.
This only imports the following tests of the non-experimental version
placed in [0]. I will add a specific test for the experimental option
handling later.
| TFO | Cookie | Payload |
---------------------------+-----+--------+---------+
basic-rw.pkt | yes | yes | yes |
basic-zero-payload.pkt | yes | yes | no |
basic-cookie-not-reqd.pkt | yes | no | yes |
basic-non-tfo-listener.pkt | no | yes | yes |
pure-syn-data.pkt | yes | no | yes |
The original pure-syn-data.pkt missed setsockopt(TCP_FASTOPEN) and did
not test TFO server in some scenarios unintentionally, so setsockopt()
is added where needed. In addition, non-TFO scenario is stripped as
it is covered by basic-non-tfo-listener.pkt. Also, I added basic- prefix.
Link: https://github.com/google/packetdrill/tree/bfc96251310f/gtests/net/tcp/fastopen/server/opt34 #[0]
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250927213022.1850048-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP Fast Open cookie is generated in __tcp_fastopen_cookie_gen_cipher().
The cookie value is generated from src/dst IPs and a key configured by
setsockopt(TCP_FASTOPEN_KEY) or net.ipv4.tcp_fastopen_key.
The default.sh sets net.ipv4.tcp_fastopen_key, and the original packetdrill
defines the corresponding cookie as TFO_COOKIE in run_all.py. [0]
Then, each test does not need to care about the value, and we can easily
update TFO_COOKIE in case __tcp_fastopen_cookie_gen_cipher() changes the
algorithm.
However, some tests use the bare hex value for specific IPv4 addresses
and do not support IPv6.
Let's define the same TFO_COOKIE in ksft_runner.sh.
We will replace such bare hex values with TFO_COOKIE except for a single
test for setsockopt(TCP_FASTOPEN_KEY).
Link: https://github.com/google/packetdrill/blob/7230b3990f94/gtests/net/packetdrill/run_all.py#L65 #[0]
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250927213022.1850048-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To enable TCP Fast Open on a server, net.ipv4.tcp_fastopen must
have 0x2 (TFO_SERVER_ENABLE), and we need to do either
1. Call setsockopt(TCP_FASTOPEN) for the socket
2. Set 0x400 (TFO_SERVER_WO_SOCKOPT1) additionally to net.ipv4.tcp_fastopen
The default.sh sets 0x70403 so that each test does not need setsockopt().
(0x1 is TFO_CLIENT_ENABLE, and 0x70000 is ...???)
However, some tests overwrite net.ipv4.tcp_fastopen without
TFO_SERVER_WO_SOCKOPT1 and forgot setsockopt(TCP_FASTOPEN).
For example, pure-syn-data.pkt [0] tests non-TFO servers unintentionally,
except in the first scenario.
To prevent such an accident, let's require explicit setsockopt().
TFO_CLIENT_ENABLE is necessary for
tcp_syscall_bad_arg_fastopen-invalid-buf-ptr.pkt.
Link: https://github.com/google/packetdrill/blob/bfc96251310f/gtests/net/tcp/fastopen/server/opt34/pure-syn-data.pkt #[0]
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250927213022.1850048-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cited commit forgot to update the ktap_set_plan call.
ktap_set_plan sets the number of tests (KSFT_NUM_TESTS), which must
match the number of executed tests (KTAP_CNT_PASS + KTAP_CNT_SKIP +
KTAP_CNT_XFAIL) in ktap_finished.
Otherwise, the selftest exit()s with 1.
Let's adjust KSFT_NUM_TESTS based on supported protocols.
While at it, misalignment is fixed up.
Fixes: a5c10aa3d1 ("selftests/net: packetdrill: Support single protocol test.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250927213022.1850048-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here are a few sub-tests for mptcp_join.sh, validating the new 'laminar'
endpoint type.
In a setup where subflows created using the routing rules would be
rejected by the listener, and where the latter announces one IP address,
some cases are verified:
- Without any 'laminar' endpoints: no new subflows are created.
- With one 'laminar' endpoint: a second subflow is created.
- With multiple 'laminar' endpoints: 2 IPv4 subflows are created.
- With one 'laminar' endpoint, but the server announcing a second IP
address, only one subflow is created.
- With one 'laminar' + 'subflow' endpoint, the same endpoint is only
used once.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250927-net-next-mptcp-rcv-path-imp-v1-8-5da266aa9c1a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull hardening updates from Kees Cook:
"One notable addition is the creation of the 'transitional' keyword for
kconfig so CONFIG renaming can go more smoothly.
This has been a long-standing deficiency, and with the renaming of
CONFIG_CFI_CLANG to CONFIG_CFI (since GCC will soon have KCFI
support), this came up again.
The breadth of the diffstat is mainly this renaming.
- Clean up usage of TRAILING_OVERLAP() (Gustavo A. R. Silva)
- lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
(Junjie Cao)
- Add str_assert_deassert() helper (Lad Prabhakar)
- gcc-plugins: Remove TODO_verify_il for GCC >= 16
- kconfig: Fix BrokenPipeError warnings in selftests
- kconfig: Add transitional symbol attribute for migration support
- kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI"
* tag 'hardening-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib/string_choices: Add str_assert_deassert() helper
kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI
kconfig: Add transitional symbol attribute for migration support
kconfig: Fix BrokenPipeError warnings in selftests
gcc-plugins: Remove TODO_verify_il for GCC >= 16
stddef: Introduce __TRAILING_OVERLAP()
stddef: Remove token-pasting in TRAILING_OVERLAP()
lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
Pull seccomp update from Kees Cook:
- Fix race with WAIT_KILLABLE_RECV (Johannes Nixdorf)
* tag 'seccomp-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: Add a test for the WAIT_KILLABLE_RECV fast reply race
seccomp: Fix a race with WAIT_KILLABLE_RECV if the tracer replies too fast
Pull namespace updates from Christian Brauner:
"This contains a larger set of changes around the generic namespace
infrastructure of the kernel.
Each specific namespace type (net, cgroup, mnt, ...) embedds a struct
ns_common which carries the reference count of the namespace and so
on.
We open-coded and cargo-culted so many quirks for each namespace type
that it just wasn't scalable anymore. So given there's a bunch of new
changes coming in that area I've started cleaning all of this up.
The core change is to make it possible to correctly initialize every
namespace uniformly and derive the correct initialization settings
from the type of the namespace such as namespace operations, namespace
type and so on. This leaves the new ns_common_init() function with a
single parameter which is the specific namespace type which derives
the correct parameters statically. This also means the compiler will
yell as soon as someone does something remotely fishy.
The ns_common_init() addition also allows us to remove ns_alloc_inum()
and drops any special-casing of the initial network namespace in the
network namespace initialization code that Linus complained about.
Another part is reworking the reference counting. The reference
counting was open-coded and copy-pasted for each namespace type even
though they all followed the same rules. This also removes all open
accesses to the reference count and makes it private and only uses a
very small set of dedicated helpers to manipulate them just like we do
for e.g., files.
In addition this generalizes the mount namespace iteration
infrastructure introduced a few cycles ago. As reminder, the vfs makes
it possible to iterate sequentially and bidirectionally through all
mount namespaces on the system or all mount namespaces that the caller
holds privilege over. This allow userspace to iterate over all mounts
in all mount namespaces using the listmount() and statmount() system
call.
Each mount namespace has a unique identifier for the lifetime of the
systems that is exposed to userspace. The network namespace also has a
unique identifier working exactly the same way. This extends the
concept to all other namespace types.
The new nstree type makes it possible to lookup namespaces purely by
their identifier and to walk the namespace list sequentially and
bidirectionally for all namespace types, allowing userspace to iterate
through all namespaces. Looking up namespaces in the namespace tree
works completely locklessly.
This also means we can move the mount namespace onto the generic
infrastructure and remove a bunch of code and members from struct
mnt_namespace itself.
There's a bunch of stuff coming on top of this in the future but for
now this uses the generic namespace tree to extend a concept
introduced first for pidfs a few cycles ago. For a while now we have
supported pidfs file handles for pidfds. This has proven to be very
useful.
This extends the concept to cover namespaces as well. It is possible
to encode and decode namespace file handles using the common
name_to_handle_at() and open_by_handle_at() apis.
As with pidfs file handles, namespace file handles are exhaustive,
meaning it is not required to actually hold a reference to nsfs in
able to decode aka open_by_handle_at() a namespace file handle.
Instead the FD_NSFS_ROOT constant can be passed which will let the
kernel grab a reference to the root of nsfs internally and thus decode
the file handle.
Namespaces file descriptors can already be derived from pidfds which
means they aren't subject to overmount protection bugs. IOW, it's
irrelevant if the caller would not have access to an appropriate
/proc/<pid>/ns/ directory as they could always just derive the
namespace based on a pidfd already.
It has the same advantage as pidfds. It's possible to reliably and for
the lifetime of the system refer to a namespace without pinning any
resources and to compare them trivially.
Permission checking is kept simple. If the caller is located in the
namespace the file handle refers to they are able to open it otherwise
they must hold privilege over the owning namespace of the relevant
namespace.
The namespace file handle layout is exposed as uapi and has a stable
and extensible format. For now it simply contains the namespace
identifier, the namespace type, and the inode number. The stable
format means that userspace may construct its own namespace file
handles without going through name_to_handle_at() as they are already
allowed for pidfs and cgroup file handles"
* tag 'namespace-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (65 commits)
ns: drop assert
ns: move ns type into struct ns_common
nstree: make struct ns_tree private
ns: add ns_debug()
ns: simplify ns_common_init() further
cgroup: add missing ns_common include
ns: use inode initializer for initial namespaces
selftests/namespaces: verify initial namespace inode numbers
ns: rename to __ns_ref
nsfs: port to ns_ref_*() helpers
net: port to ns_ref_*() helpers
uts: port to ns_ref_*() helpers
ipv4: use check_net()
net: use check_net()
net-sysfs: use check_net()
user: port to ns_ref_*() helpers
time: port to ns_ref_*() helpers
pid: port to ns_ref_*() helpers
ipc: port to ns_ref_*() helpers
cgroup: port to ns_ref_*() helpers
...
Pull vfs mount updates from Christian Brauner:
"This contains some work around mount api handling:
- Output the warning message for mnt_too_revealing() triggered during
fsmount() to the fscontext log. This makes it possible for the
mount tool to output appropriate warnings on the command line.
For example, with the newest fsopen()-based mount(8) from
util-linux, the error messages now look like:
# mount -t proc proc /tmp
mount: /tmp: fsmount() failed: VFS: Mount too revealing.
dmesg(1) may have more information after failed mount system call.
- Do not consume fscontext log entries when returning -EMSGSIZE
Userspace generally expects APIs that return -EMSGSIZE to allow for
them to adjust their buffer size and retry the operation.
However, the fscontext log would previously clear the message even
in the -EMSGSIZE case.
Given that it is very cheap for us to check whether the buffer is
too small before we remove the message from the ring buffer, let's
just do that instead.
- Drop an unused argument from do_remount()"
* tag 'vfs-6.18-rc1.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: fs/namespace.c: remove ms_flags argument from do_remount
selftests/filesystems: add basic fscontext log tests
fscontext: do not consume log entries when returning -EMSGSIZE
vfs: output mount_too_revealing() errors to fscontext
docs/vfs: Remove mentions to the old mount API helpers
fscontext: add custom-prefix log helpers
fs: Remove mount_bdev
fs: Remove mount_nodev
Pull misc vfs updates from Christian Brauner:
"This contains the usual selections of misc updates for this cycle.
Features:
- Add "initramfs_options" parameter to set initramfs mount options.
This allows to add specific mount options to the rootfs to e.g.,
limit the memory size
- Add RWF_NOSIGNAL flag for pwritev2()
Add RWF_NOSIGNAL flag for pwritev2. This flag prevents the SIGPIPE
signal from being raised when writing on disconnected pipes or
sockets. The flag is handled directly by the pipe filesystem and
converted to the existing MSG_NOSIGNAL flag for sockets
- Allow to pass pid namespace as procfs mount option
Ever since the introduction of pid namespaces, procfs has had very
implicit behaviour surrounding them (the pidns used by a procfs
mount is auto-selected based on the mounting process's active
pidns, and the pidns itself is basically hidden once the mount has
been constructed)
This implicit behaviour has historically meant that userspace was
required to do some special dances in order to configure the pidns
of a procfs mount as desired. Examples include:
* In order to bypass the mnt_too_revealing() check, Kubernetes
creates a procfs mount from an empty pidns so that user
namespaced containers can be nested (without this, the nested
containers would fail to mount procfs)
But this requires forking off a helper process because you cannot
just one-shot this using mount(2)
* Container runtimes in general need to fork into a container
before configuring its mounts, which can lead to security issues
in the case of shared-pidns containers (a privileged process in
the pidns can interact with your container runtime process)
While SUID_DUMP_DISABLE and user namespaces make this less of an
issue, the strict need for this due to a minor uAPI wart is kind
of unfortunate
Things would be much easier if there was a way for userspace to
just specify the pidns they want. So this pull request contains
changes to implement a new "pidns" argument which can be set
using fsconfig(2):
fsconfig(procfd, FSCONFIG_SET_FD, "pidns", NULL, nsfd);
fsconfig(procfd, FSCONFIG_SET_STRING, "pidns", "/proc/self/ns/pid", 0);
or classic mount(2) / mount(8):
// mount -t proc -o pidns=/proc/self/ns/pid proc /tmp/proc
mount("proc", "/tmp/proc", "proc", MS_..., "pidns=/proc/self/ns/pid");
Cleanups:
- Remove the last references to EXPORT_OP_ASYNC_LOCK
- Make file_remove_privs_flags() static
- Remove redundant __GFP_NOWARN when GFP_NOWAIT is used
- Use try_cmpxchg() in start_dir_add()
- Use try_cmpxchg() in sb_init_done_wq()
- Replace offsetof() with struct_size() in ioctl_file_dedupe_range()
- Remove vfs_ioctl() export
- Replace rwlock() with spinlock in epoll code as rwlock causes
priority inversion on preempt rt kernels
- Make ns_entries in fs/proc/namespaces const
- Use a switch() statement() in init_special_inode() just like we do
in may_open()
- Use struct_size() in dir_add() in the initramfs code
- Use str_plural() in rd_load_image()
- Replace strcpy() with strscpy() in find_link()
- Rename generic_delete_inode() to inode_just_drop() and
generic_drop_inode() to inode_generic_drop()
- Remove unused arguments from fcntl_{g,s}et_rw_hint()
Fixes:
- Document @name parameter for name_contains_dotdot() helper
- Fix spelling mistake
- Always return zero from replace_fd() instead of the file descriptor
number
- Limit the size for copy_file_range() in compat mode to prevent a
signed overflow
- Fix debugfs mount options not being applied
- Verify the inode mode when loading it from disk in minixfs
- Verify the inode mode when loading it from disk in cramfs
- Don't trigger automounts with RESOLVE_NO_XDEV
If openat2() was called with RESOLVE_NO_XDEV it didn't traverse
through automounts, but could still trigger them
- Add FL_RECLAIM flag to show_fl_flags() macro so it appears in
tracepoints
- Fix unused variable warning in rd_load_image() on s390
- Make INITRAMFS_PRESERVE_MTIME depend on BLK_DEV_INITRD
- Use ns_capable_noaudit() when determining net sysctl permissions
- Don't call path_put() under namespace semaphore in listmount() and
statmount()"
* tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (38 commits)
fcntl: trim arguments
listmount: don't call path_put() under namespace semaphore
statmount: don't call path_put() under namespace semaphore
pid: use ns_capable_noaudit() when determining net sysctl permissions
fs: rename generic_delete_inode() and generic_drop_inode()
init: INITRAMFS_PRESERVE_MTIME should depend on BLK_DEV_INITRD
initramfs: Replace strcpy() with strscpy() in find_link()
initrd: Use str_plural() in rd_load_image()
initramfs: Use struct_size() helper to improve dir_add()
initrd: Fix unused variable warning in rd_load_image() on s390
fs: use the switch statement in init_special_inode()
fs/proc/namespaces: make ns_entries const
filelock: add FL_RECLAIM to show_fl_flags() macro
eventpoll: Replace rwlock with spinlock
selftests/proc: add tests for new pidns APIs
procfs: add "pidns" mount option
pidns: move is-ancestor logic to helper
openat2: don't trigger automounts with RESOLVE_NO_XDEV
namei: move cross-device check to __traverse_mounts
namei: remove LOOKUP_NO_XDEV check from handle_mounts
...
Merge ACPICA updates (20250807 release material with a few fixes on top)
for 6.18-rc1:
- Add SoundWire File Table (SWFT) signature to ACPICA (Maciej Strozek)
- Rearrange local variable definition involving #ifdef in ACPICA to
avoid using uninitialized variables (Zhe Qiao)
- Allow ACPICA to skip Global Lock initialization (Huacai Chen)
- Apply ACPI_NONSTRING in more places in ACPICA and fix two regressions
related to incorrect ACPI_NONSTRING usage (Ahmed Salem)
- Fix printing CDAT table header when dissasebling CDAT AML (Ahmed
Salem)
- Use acpi_ds_clear_operands() in acpi_ds_call_control_method() in
ACPICA (Hans de Goede)
- Update dsmethod.c in ACPICA to address unused variable warning (Saket
Dumbre)
- Print error messages in ACPICA for too few or too many control method
arguments (Saket Dumbre)
- Update ACPICA version to 20250807 (Saket Dumbre)
- Fix largest possible resource descriptor index in ACPICA (Dmitry
Antipov)
- Add Back-Invalidate restriction to CXL Window for CEDT in ACPICA
(Davidlohr Bueso).
- Add the package type to acceptable Arg3 types for _DSM in ACPICA
because ACPI_TYPE_ANY does not cover it (Saket Dumbre)
- Fix return values in ap_is_valid_checksum() in the acpidump utility
in ACPICA (Kaushlendra Kumar)
* acpica:
ACPICA: acpidump: fix return values in ap_is_valid_checksum()
ACPICA: ACPI_TYPE_ANY does not include the package type
ACPICA: CEDT: Add Back-Invalidate restriction to CXL Window
ACPICA: Fix largest possible resource descriptor index
ACPICA: Update version to 20250807
ACPICA: Print error messages for too few or too many arguments
ACPICA: Update dsmethod.c to get rid of unused variable warning
ACPICA: dispatcher: Use acpi_ds_clear_operands() in acpi_ds_call_control_method()
ACPICA: Debugger: drop ACPI_NONSTRING attribute from name_seg
ACPICA: acpidump: drop ACPI_NONSTRING attribute from file_name
ACPICA: iASL: Fix printing CDAT table header
ACPICA: Apply ACPI_NONSTRING
ACPICA: Allow to skip Global Lock initialization
ACPICA: Change the compilation conditions
ACPICA: Remove redundant "#ifdef" definitions
ACPICA: Modify variable definition position
ACPICA: Add SoundWire File Table (SWFT) signature
Merge power management utilities updates for 6.18-rc1:
- Fix and clean up the x86_energy_perf_policy utility and update its
documentation (Len Brown, Kaushlendra Kumar)
- Fix incorrect sorting of PMT telemetry in turbostat (Kaushlendra
Kumar)
- Fix incorrect size in cpuidle_state_disable() and the error return
value of cpupower_write_sysfs() in cpupower (Kaushlendra Kumar)
* pm-tools:
tools/power x86_energy_perf_policy.8: Emphasize preference for SW interfaces
tools/power x86_energy_perf_policy: Add make snapshot target
tools/power x86_energy_perf_policy: Prefer driver HWP limits
tools/power x86_energy_perf_policy: EPB access is only via sysfs
tools/power x86_energy_perf_policy: Prepare for MSR/sysfs refactoring
tools/power x86_energy_perf_policy: Enhance HWP enable
tools/power x86_energy_perf_policy: Enhance HWP enabled check
tools/power x86_energy_perf_policy: Fix incorrect fopen mode usage
tools/power turbostat: Fix incorrect sorting of PMT telemetry
tools/cpupower: Fix incorrect size in cpuidle_state_disable()
tools/cpupower: fix error return value in cpupower_write_sysfs()
Merge cpupower utility updates for 6.18-rc1 from Shuah Khan:
"Fixes incorrect return vale in cpupower_write_sysfs() error path
and passing incorrect size to cpuidle_state_write_file() while
writing status to disable file in cpuidle_state_disable()."
* tag 'linux-cpupower-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux: (1125 commits)
tools/cpupower: Fix incorrect size in cpuidle_state_disable()
tools/cpupower: fix error return value in cpupower_write_sysfs()
Linux 6.17-rc6
MAINTAINERS: Input: Drop melfas-mip4 section
USB: core: remove the move buf action
MAINTAINERS: Update the DMA Rust entry
erofs: fix long xattr name prefix placement
Revert "net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups"
hsr: hold rcu and dev lock for hsr_get_port_ndev
hsr: use hsr_for_each_port_rtnl in hsr_port_get_hsr
hsr: use rtnl lock when iterating over ports
wifi: nl80211: completely disable per-link stats for now
net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups
net: ethtool: fix wrong type used in struct kernel_ethtool_ts_info
selftests/bpf: Skip timer cases when bpf_timer is not supported
bpf: Reject bpf_timer for PREEMPT_RT
libceph: fix invalid accesses to ceph_connection_v1_info
PM: hibernate: Restrict GFP mask in hibernation_snapshot()
MAINTAINERS: add Phil as netfilter reviewer
netfilter: nf_tables: restart set lookup on base_seq change
...
The fast path through a write will require replacing a single node in
the tree. Using a sheaf (32 nodes) is too heavy for the fast path, so
special case the node store operation by just allocating one node in the
maple state.
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Use prefilled sheaves instead of bulk allocations. This should speed up
the allocations and the return path of unused allocations.
Remove the push and pop of nodes from the maple state as this is now
handled by the slab layer with sheaves.
Testing has been removed as necessary since the features of the tree
have been reduced.
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Add the prefilled sheaf structs to the slab header and the associated
functions to the testing/shared/linux.c file.
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
There's some duplicated code and we are about to add more functionality
in maple-shared.h that we will need in the userspace maple test to be
available, so include it via maple-shim.c
Co-developed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The slab changes for sheaves requires more effort in the testing code.
Unite all the kmem_cache work into the tools/include slab header for
both the vma and maple tree testing.
The vma test code also requires importing more #defines to allow for
seamless use of the shared kmem_cache code.
This adds the pthread header to the slab header in the tools directory
to allow for the pthread_mutex in linux.c.
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Add the reset of the ref count in vma_lock_init(). This is needed if
the vma memory is not zeroed on allocation.
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Bulk insert mode was added to facilitate forking faster, but forking now
uses __mt_dup() to duplicate the tree.
The addition of sheaves has made the bulk allocations difficult to
maintain - since the expected entries would preallocate into the maple
state. A big part of the maple state node allocation was the ability to
push nodes back onto the state for later use, which was essential to the
bulk insert algorithm.
Remove mas_expected_entries() and mas_destroy_rebalance() functions as
well as the MA_STATE_BULK and MA_STATE_REBALANCE maple state flags since
there are no users anymore. Drop the associated testing as well.
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
ASoC: Updates for v6.18 round 2
Some more updates for v6.18, mostly fixes for the earlier pull request
with some cleanups and more minor fixes for older code. We do have one
new driver, the TI TAS2783A, and some quirks for new platforms.
Reimplement libbpf_sha256() using some basic SHA-256 C code. This
eliminates the newly-added dependency on AF_ALG, which is a problematic
UAPI that is not supported by all kernels.
Make libbpf_sha256() return void, since it can no longer fail. This
simplifies some callers. Also drop the unnecessary 'sha_out_sz'
parameter. Finally, also fix the typo in "compute_sha_udpate_offsets".
Fixes: c297fe3e9f ("libbpf: Implement SHA256 internal helper")
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/r/20250928003833.138407-1-ebiggers@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce a kernel module that will exercise lock acquisition in the NMI
path, and bias toward creating contention such that NMI waiters end up
being non-head waiters. Prior to the rqspinlock fix made in the commit
0d80e7f951 ("rqspinlock: Choose trylock fallback for NMI waiters"), it
was possible for the queueing path of non-head waiters to get stuck in
NMI, which this stress test reproduces fairly easily with just 3 CPUs.
Both AA and ABBA flavors are supported, and it will serve as a test case
for future fixes that address this corner case. More information about
the problem in question is available in the commit cited above. When the
fix is reverted, this stress test will lock up the system.
To enable this test automatically through the test_progs infrastructure,
add a load_module_params API to exercise both AA and ABBA cases when
running the test.
Note that the test runs for at most 5 seconds, and becomes a noop after
that, in order to allow the system to make forward progress. In
addition, CPU 0 is always kept untouched by the created threads and
NMIs. The test will automatically scale to the number of available
online CPUs.
Note that at least 3 CPUs are necessary to run this test, hence skip the
selftest in case the environment has less than 3 CPUs available.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250927205304.199760-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull rtla tool fixes from Steven Rostedt:
- Fix a buffer overflow in actions_parse()
The "trigger_c" variable did not account for the nul byte when
determining its size
- Fix a compare that had the values reversed
actions_destroy() is supposed to reallocate when len is greater than
the current size, but the compare was testing if size is greater than
the new length
* tag 'trace-tools-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla/actions: Fix condition for buffer reallocation
rtla: Fix buffer overflow in actions_parse
Add a small test case which adds two programs - one calling the other
through a tailcall - and check that BPF rejects them in case of different
expected_attach_type values:
# ./vmtest.sh -- ./test_progs -t xdp_devmap
[...]
#641/1 xdp_devmap_attach/DEVMAP with programs in entries:OK
#641/2 xdp_devmap_attach/DEVMAP with frags programs in entries:OK
#641/3 xdp_devmap_attach/Verifier check of DEVMAP programs:OK
#641/4 xdp_devmap_attach/DEVMAP with programs in entries on veth:OK
#641 xdp_devmap_attach:OK
Summary: 2/4 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250926171201.188490-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a check() parameter to indicate which text must not appear in the
output.
Simplify the code so that we can print failures as they happen rather
than trying to figure out what went wrong after printing "not ok". This
also means that "not ok" gets printed after the info rather than before,
which seems more intuitive anyway.
Cc: John Kacur <jkacur@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Link: https://lore.kernel.org/20250907022325.243930-7-crwood@redhat.com
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Crystal Wood <crwood@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently a lot of code is duplicated between the different rtla tools,
making maintenance more difficult, and encouraging divergence such as
features that are only implemented for certain tools even though they
could be more broadly applicable.
Merge the various main() functions into a common run_tool() with an ops
struct for tool-specific details.
Implement enough support for actions on osnoise to not need to keep the
old params->trace_output path.
Cc: John Kacur <jkacur@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Link: https://lore.kernel.org/20250907022325.243930-5-crwood@redhat.com
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Crystal Wood <crwood@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
