The hyp virtual timer registers only exist when VHE is present,
Similarly, VNCR_EL2 only exists when NV2 is present.
Make these dependencies explicit.
Signed-off-by: Marc Zyngier <maz@kernel.org>
vgic_lpi_stress rather hilariously leaves IRQs disabled for the duration
of the test. While the ITS translation of MSIs happens regardless of
this, for completeness the guest should actually handle the LPIs.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Zenghui Yu <zenghui.yu@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
vcpus array contains pointers to struct kvm_vcpu {}. It is way overkill
to allocate the array with (nr_cpus * sizeof(struct kvm_vcpu)). Fix the
allocation by using the correct size.
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
We forgot to sync several registers (ID_AA64PFR1, MPIDR, CLIDR) in guest to
make sure that the guest had seen the written value.
Add them to the list.
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Reviewed-By: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The KVM_IRQFD ioctl fails if no irqchip is present in-kernel, which
isn't too surprising as there's not much KVM can do for an IRQ if it
cannot resolve a destination.
As written the irqfd_test assumes that a 'default' VM created in
selftests has an in-kernel irqchip created implicitly. That may be the
case on x86 but it isn't necessarily true on other architectures.
Add an arch predicate indicating if 'default' VMs get an irqchip and
make the irqfd_test depend on it. Work around arm64 VGIC initialization
requirements by using vm_create_with_one_vcpu(), ignoring the created
vCPU as it isn't used for the test.
Reported-by: Sebastian Ott <sebott@redhat.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Fixes: 7e9b231c40 ("KVM: selftests: Add a KVM_IRQFD test to verify uniqueness requirements")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Store the width of arm64's timer counter as an "int", not a "uint64_t".
ilog2() returns an "int", and more importantly using what is an "unsigned
long" under the hood makes clang unhappy due to a type mismatch when
clamping the width to a sane value.
arm64/arch_timer_edge_cases.c:1032:10: error: comparison of distinct pointer types
('typeof (width) *' (aka 'unsigned long *') and 'typeof (56) *' (aka 'int *'))
[-Werror,-Wcompare-distinct-pointer-types]
1032 | width = clamp(width, 56, 64);
| ^~~~~~~~~~~~~~~~~~~~
tools/include/linux/kernel.h:47:45: note: expanded from macro 'clamp'
47 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~~~~~~~~~~
tools/include/linux/kernel.h:33:17: note: expanded from macro 'max'
33 | (void) (&_max1 == &_max2); \
| ~~~~~~ ^ ~~~~~~
tools/include/linux/kernel.h:39:9: note: expanded from macro 'min'
39 | typeof(x) _min1 = (x); \
| ^
Fixes: fad4cf9448 ("KVM: arm64: selftests: Determine effective counter width in arch_timer_edge_cases")
Cc: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
A defect against the architecture now allows an implementation to treat
AMO as 1 when HCR_EL2.{E2H, TGE} = {1, 0}. KVM now takes advantage of
this interpretation to address a quality of emulation issue w.r.t.
SError injection.
Add a corresponding test case and expect a pending SError to be taken.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Convert remaining __init__ files similar to what we did in
commit b615879dbf ("selftests: drv-net: make linters happy with our imports")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull more x86 updates from Borislav Petkov:
- Remove a bunch of asm implementing condition flags testing in KVM's
emulator in favor of int3_emulate_jcc() which is written in C
- Replace KVM fastops with C-based stubs which avoids problems with the
fastop infra related to latter not adhering to the C ABI due to their
special calling convention and, more importantly, bypassing compiler
control-flow integrity checking because they're written in asm
- Remove wrongly used static branches and other ugliness accumulated
over time in hyperv's hypercall implementation with a proper static
function call to the correct hypervisor call variant
- Add some fixes and modifications to allow running FRED-enabled
kernels in KVM even on non-FRED hardware
- Add kCFI improvements like validating indirect calls and prepare for
enabling kCFI with GCC. Add cmdline params documentation and other
code cleanups
- Use the single-byte 0xd6 insn as the official #UD single-byte
undefined opcode instruction as agreed upon by both x86 vendors
- Other smaller cleanups and touchups all over the place
* tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86,retpoline: Optimize patch_retpoline()
x86,ibt: Use UDB instead of 0xEA
x86/cfi: Remove __noinitretpoline and __noretpoline
x86/cfi: Add "debug" option to "cfi=" bootparam
x86/cfi: Standardize on common "CFI:" prefix for CFI reports
x86/cfi: Document the "cfi=" bootparam options
x86/traps: Clarify KCFI instruction layout
compiler_types.h: Move __nocfi out of compiler-specific header
objtool: Validate kCFI calls
x86/fred: KVM: VMX: Always use FRED for IRQs when CONFIG_X86_FRED=y
x86/fred: Play nice with invoking asm_fred_entry_from_kvm() on non-FRED hardware
x86/fred: Install system vector handlers even if FRED isn't fully enabled
x86/hyperv: Use direct call to hypercall-page
x86/hyperv: Clean up hv_do_hypercall()
KVM: x86: Remove fastops
KVM: x86: Convert em_salc() to C
KVM: x86: Introduce EM_ASM_3WCL
KVM: x86: Introduce EM_ASM_1SRC2
KVM: x86: Introduce EM_ASM_2CL
KVM: x86: Introduce EM_ASM_2W
...
Pull x86 cleanups from Borislav Petkov:
- Simplify inline asm flag output operands now that the minimum
compiler version supports the =@ccCOND syntax
- Remove a bunch of AS_* Kconfig symbols which detect assembler support
for various instruction mnemonics now that the minimum assembler
version supports them all
- The usual cleanups all over the place
* tag 'x86_cleanups_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Remove code depending on __GCC_ASM_FLAG_OUTPUTS__
x86/sgx: Use ENCLS mnemonic in <kernel/cpu/sgx/encls.h>
x86/mtrr: Remove license boilerplate text with bad FSF address
x86/asm: Use RDPKRU and WRPKRU mnemonics in <asm/special_insns.h>
x86/idle: Use MONITORX and MWAITX mnemonics in <asm/mwait.h>
x86/entry/fred: Push __KERNEL_CS directly
x86/kconfig: Remove CONFIG_AS_AVX512
crypto: x86 - Remove CONFIG_AS_VPCLMULQDQ
crypto: X86 - Remove CONFIG_AS_VAES
crypto: x86 - Remove CONFIG_AS_GFNI
x86/kconfig: Drop unused and needless config X86_64_SMP
Extract the guest_memfd test's SIGBUS handling functionality into a common
TEST_EXPECT_SIGBUS() macro in anticipation of adding more SIGBUS testcases.
Eating a SIGBUS isn't terrible difficult, but it requires a non-trivial
amount of boilerplate code, and using a macro allows selftests to print
out the exact action that failed to generate a SIGBUS without the developer
needing to remember to add a useful error message.
Explicitly mark the SIGBUS handler as "used", as gcc-14 at least likes to
discard the function before linking.
Opportunistically use TEST_FAIL(...) instead of TEST_ASSERT(false, ...),
and fix the write path of the guest_memfd test to use the local "val"
instead of hardcoding the literal value a second time.
Suggested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Lisa Wang <wyihan@google.com>
Tested-by: Lisa Wang <wyihan@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
If a VM type supports KVM_CAP_GUEST_MEMFD_MMAP, the guest_memfd test will
run all test cases with GUEST_MEMFD_FLAG_MMAP set. This leaves the code
path for creating a non-mmap()-able guest_memfd on a VM that supports
mappable guest memfds untested.
Refactor the test to run the main test suite with a given set of flags.
Then, for VM types that support the mappable capability, invoke the test
suite twice: once with no flags, and once with GUEST_MEMFD_FLAG_MMAP
set.
This ensures both creation paths are properly exercised on capable VMs.
Run test_guest_memfd_flags() only once per VM type since it depends only
on the set of valid/supported flags, i.e. iterating over an arbitrary set
of flags is both unnecessary and wrong.
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
[sean: use double-underscores for the inner helper]
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use a global variable to track the host page size in the guest_memfd test
so that the information doesn't need to be constantly passed around. The
state is purely a reflection of the underlying system, i.e. can't be set
by the test and is constant for a given invocation of the test, and thus
explicitly passing the host page size to individual testcases adds no
value, e.g. doesn't allow testing different combinations.
Making page_size a global will simplify an upcoming change to create a new
guest_memfd instance per testcase.
No functional change intended.
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a guest_memfd flag to allow userspace to state that the underlying
memory should be configured to be initialized as shared, and reject user
page faults if the guest_memfd instance's memory isn't shared. Because
KVM doesn't yet support in-place private<=>shared conversions, all
guest_memfd memory effectively follows the initial state.
Alternatively, KVM could deduce the initial state based on MMAP, which for
all intents and purposes is what KVM currently does. However, implicitly
deriving the default state based on MMAP will result in a messy ABI when
support for in-place conversions is added.
For x86 CoCo VMs, which don't yet support MMAP, memory is currently private
by default (otherwise the memory would be unusable). If MMAP implies
memory is shared by default, then the default state for CoCo VMs will vary
based on MMAP, and from userspace's perspective, will change when in-place
conversion support is added. I.e. to maintain guest<=>host ABI, userspace
would need to immediately convert all memory from shared=>private, which
is both ugly and inefficient. The inefficiency could be avoided by adding
a flag to state that memory is _private_ by default, irrespective of MMAP,
but that would lead to an equally messy and hard to document ABI.
Bite the bullet and immediately add a flag to control the default state so
that the effective behavior is explicit and straightforward.
Fixes: 3d3a04fad2 ("KVM: Allow and advertise support for host mmap() on guest_memfd files")
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rework the not-yet-released KVM_CAP_GUEST_MEMFD_MMAP into a more generic
KVM_CAP_GUEST_MEMFD_FLAGS capability so that adding new flags doesn't
require a new capability, and so that developers aren't tempted to bundle
multiple flags into a single capability.
Note, kvm_vm_ioctl_check_extension_generic() can only return a 32-bit
value, but that limitation can be easily circumvented by adding e.g.
KVM_CAP_GUEST_MEMFD_FLAGS2 in the unlikely event guest_memfd supports more
than 32 flags.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add test to verify that unpinning hash tables containing internal timer
structures does not trigger context warnings.
Each subtest (timer_prealloc and timer_no_prealloc) can trigger the
context warning when unpinning, but the warning cannot be triggered
twice within a short time interval (a HZ), which is expected behavior.
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20251008102628.808045-3-kafai.wan@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- mlx5: fix pre-2.40 binutils assembler error
Current release - new code bugs:
- net: psp: don't assume reply skbs will have a socket
- eth: fbnic: fix missing programming of the default descriptor
Previous releases - regressions:
- page_pool: fix PP_MAGIC_MASK to avoid crashing on some 32-bit arches
- tcp:
- take care of zero tp->window_clamp in tcp_set_rcvlowat()
- don't call reqsk_fastopen_remove() in tcp_conn_request()
- eth:
- ice: release xa entry on adapter allocation failure
- usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock
Previous releases - always broken:
- netfilter: validate objref and objrefmap expressions
- sctp: fix a null dereference in sctp_disposition sctp_sf_do_5_1D_ce()
- eth:
- mlx4: prevent potential use after free in mlx4_en_do_uc_filter()
- mlx5: prevent tunnel mode conflicts between FDB and NIC IPsec tables
- ocelot: fix use-after-free caused by cyclic delayed work
Misc:
- add support for MediaTek PCIe 5G HP DRMR-H01"
* tag 'net-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
net: airoha: Fix loopback mode configuration for GDM2 port
selftests: drv-net: pp_alloc_fail: add necessary optoins to config
selftests: drv-net: pp_alloc_fail: lower traffic expectations
selftests: drv-net: fix linter warnings in pp_alloc_fail
eth: fbnic: fix reporting of alloc_failed qstats
selftests: drv-net: xdp: add test for interface level qstats
selftests: drv-net: xdp: rename netnl to ethnl
eth: fbnic: fix saving stats from XDP_TX rings on close
eth: fbnic: fix accounting of XDP packets
eth: fbnic: fix missing programming of the default descriptor
selftests: netfilter: query conntrack state to check for port clash resolution
selftests: netfilter: nft_fib.sh: fix spurious test failures
bridge: br_vlan_fill_forward_path_pvid: use br_vlan_group_rcu()
netfilter: nft_objref: validate objref and objrefmap expressions
net: pse-pd: tps23881: Fix current measurement scaling
net/mlx5: fix pre-2.40 binutils assembler error
net/mlx5e: Do not fail PSP init on missing caps
net/mlx5e: Prevent tunnel reformat when tunnel mode not allowed
net/mlx5: Prevent tunnel mode conflicts between FDB and NIC IPsec tables
net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock
...
Lower the expected level of traffic in the pp_alloc_fail test
and calculate failure counter thresholds based on the traffic
rather than using a fixed constant.
We only have "QEMU HW" in NIPA right now, and the test (due to
debug dependencies) only works on debug kernels in the first place.
We need some place for it to pass otherwise it seems to be bit
rotting. So lower the traffic threshold so that it passes on QEMU
and with a debug kernel...
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-9-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix linter warnings, it's a bit hard to check for new ones otherwise.
W0311: Bad indentation. Found 16 spaces, expected 12 (bad-indentation)
C0114: Missing module docstring (missing-module-docstring)
W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
C0116: Missing function or method docstring (missing-function-docstring)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-8-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Extended 'perf annotate' with DWARF type information
(--code-with-type) integration in the TUI, including a 'T'
hotkey to toggle it
- Enhanced 'perf bench mem' with new mmap() workloads and control
over page/chunk sizes
- Fix 'perf stat' error handling to correctly display unsupported
events
- Improved support for Clang cross-compilation
- Refactored LLVM and Capstone disasm for modularity
- Introduced the :X modifier to exclude an event from automatic
regrouping
- Adjusted KVM sampling defaults to use the "cycles" event to prevent
failures
- Added comprehensive support for decoding PowerPC Dispatch Trace Log
(DTL)
- Updated Arm SPE tracing logic for better analysis of memory and snoop
details
- Synchronized Intel PMU events and metrics with TMA 5.1 across
multiple processor generations
- Converted dependencies like libperl and libtracefs to be opt-in
- Handle more Rust symbols in kallsyms ('N', debugging)
- Improve the python binding to allow for python based tools to use
more of the libraries, add a 'ilist' utility to test those new
bindings
- Various 'perf test' fixes
- Kan Liang no longer a perf tools reviewer
* tag 'perf-tools-for-v6.18-1-2025-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (192 commits)
perf tools: Fix arm64 libjvmti build by generating unistd_64.h
perf tests: Don't retest sections in "Object code reading"
perf docs: Document building with Clang
perf build: Support build with clang
perf test coresight: Dismiss clang warning for unroll loop thread
perf test coresight: Dismiss clang warning for thread loop
perf test coresight: Dismiss clang warning for memcpy thread
perf build: Disable thread safety analysis for perl header
perf build: Correct CROSS_ARCH for clang
perf python: split Clang options when invoking Popen
tools build: Align warning options with perf
perf disasm: Remove unused evsel from 'struct annotate_args'
perf srcline: Fallback between addr2line implementations
perf disasm: Make ins__scnprintf() and ins__is_nop() static
perf dso: Clean up read_symbol() error handling
perf dso: Support BPF programs in dso__read_symbol()
perf dso: Move read_symbol() from llvm/capstone to dso
perf llvm: Reduce LLVM initialization
perf check: Add libLLVM feature
perf parse-events: Fix parsing of >30kb event strings
...
Jakub reported this self test flaking occasionally (fails, but passes on
re-run) on debug kernels.
This is because the test checks for elapsed time to determine if both
connections were established in parallel.
Rework this to no longer depend on timing.
Use busywait helper to check that both sockets have moved to established
state and then query the conntrack engine for the two entries.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netfilter-devel/20250926163318.40d1a502@kernel.org/
Fixes: 117e149e26 ("selftests: netfilter: test nat source port clash resolution interaction with tcp early demux")
Signed-off-by: Florian Westphal <fw@strlen.de>
Jakub reports spurious failure of nft_fib.sh test.
This is caused by a subtle bug inherited when i moved faulty ping
from one test case to another.
nft_fib.sh not only checks that the fib expression matched, it also
records the number of matches and then validates we have the expected
count. When I did this it was under the assumption that we would
have 0 to n matching packets. In case of the failure, the entry has
n+1 matching packets.
This happens because ping_unreachable helper uses "ping -c 1 -w 1",
instead of the intended "-W". -w alters the meaning of -c (count),
namely, its then treated as number of wanted *replies* instead of
"number of packets to send".
So, in some cases, ping -c 1 -w 1 ends up sending two packets which then
makes the test fail due to the higher-than-expected packet count.
Fix the actual bug (s/-w/-W) and also change the error handling:
1. Show the number of expected packets in the error message
2. Always try to delete the key from the set.
Else, later test that makes sure we don't have unexpected keys
in there will always fail as well.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netfilter-devel/20250927090709.0b3cd783@kernel.org/
Fixes: 98287045c9 ("selftests: netfilter: move fib vrf test to nft_fib.sh")
Signed-off-by: Florian Westphal <fw@strlen.de>
Pull more thermal control updates from Rafael Wysocki:
"Fix RZ/G3E driver introduction fall-out (Geert Uytterhoeven) and
improve the compilation and installation of the thermal library for
user space (Emil Dahl Juhl and Sascha Hauer)"
* tag 'thermal-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools: lib: thermal: expose thermal_exit symbols
tools: lib: thermal: don't preserve owner in install
tools: lib: thermal: use pkg-config to locate libnl3
thermal: renesas: Fix RZ/G3E fall-out
Expand the prefault memory selftest to add a regression test for a KVM bug
where KVM's retry logic would result in (breakable) deadlock due to the
memslot deletion waiting on prefaulting to release SRCU, and prefaulting
waiting on the memslot to fully disappear (KVM uses a two-step process to
delete memslots, and KVM x86 retries page faults if a to-be-deleted, a.k.a.
INVALID, memslot is encountered).
To exercise concurrent memslot remove, spawn a second thread to initiate
memslot removal at roughly the same time as prefaulting. Test memslot
removal for all testcases, i.e. don't limit concurrent removal to only the
success case. There are essentially three prefault scenarios (so far)
that are of interest:
1. Success
2. ENOENT due to no memslot
3. EAGAIN due to INVALID memslot
For all intents and purposes, #1 and #2 are mutually exclusive, or rather,
easier to test via separate testcases since writing to non-existent memory
is trivial. But for #3, making it mutually exclusive with #1 _or_ #2 is
actually more complex than testing memslot removal for all scenarios. The
only requirement to let memslot removal coexist with other scenarios is a
way to guarantee a stable result, e.g. that the "no memslot" test observes
ENOENT, not EAGAIN, for the final checks.
So, rather than make memslot removal mutually exclusive with the ENOENT
scenario, simply restore the memslot and retry prefaulting. For the "no
memslot" case, KVM_PRE_FAULT_MEMORY should be idempotent, i.e. should
always fail with ENOENT regardless of how many times userspace attempts
prefaulting.
Pass in both the base GPA and the offset (instead of the "full" GPA) so
that the worker can recreate the memslot.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20250924174255.2141847-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Commit 23ef9d4397 ("kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI")
missed one instance of CONFIG_CFI_CLANG. Rename it to match the original
kernel header. This addresses the following build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/linux/cfi_types.h include/linux/cfi_types.h
Cc: Kees Cook <kees@kernel.org>
Fixes: a5ba183bde ("Merge tag 'hardening-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20251006225148.1636486-1-cmllamas@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
Linters are still not very happy with our __init__ files,
which was pointed out in recent review (see Link).
We have previously started importing things one by one to
make linters happy with the test files (which import from __init__).
But __init__ file itself still makes linters unhappy.
To clean it up I believe we must completely remove the wildcard
imports, and assign the imported modules to __all__.
hds.py needs to be fixed because it seems to be importing
the Python standard random from lib.net.
We can't use ksft_pr() / ktap_result() in case importing
from net.lib fails. Linters complain that those helpers
themselves may not have been imported.
Link: https://lore.kernel.org/9d215979-6c6d-4e9b-9cdd-39cff595866e@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20251003164748.860042-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull nfsd updates from Chuck Lever:
"Mike Snitzer has prototyped a mechanism for disabling I/O caching in
NFSD. This is introduced in v6.18 as an experimental feature. This
enables scaling NFSD in /both/ directions:
- NFS service can be supported on systems with small memory
footprints, such as low-cost cloud instances
- Large NFS workloads will be less likely to force the eviction of
server-local activity, helping it avoid thrashing
Jeff Layton contributed a number of fixes to the new attribute
delegation implementation (based on a pending Internet RFC) that we
hope will make attribute delegation reliable enough to enable by
default, as it is on the Linux NFS client.
The remaining patches in this pull request are clean-ups and minor
optimizations. Many thanks to the contributors, reviewers, testers,
and bug reporters who participated during the v6.18 NFSD development
cycle"
* tag 'nfsd-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (42 commits)
nfsd: discard nfserr_dropit
SUNRPC: Make RPCSEC_GSS_KRB5 select CRYPTO instead of depending on it
NFSD: Add io_cache_{read,write} controls to debugfs
NFSD: Do the grace period check in ->proc_layoutget
nfsd: delete unnecessary NULL check in __fh_verify()
NFSD: Allow layoutcommit during grace period
NFSD: Disallow layoutget during grace period
sunrpc: fix "occurence"->"occurrence"
nfsd: Don't force CRYPTO_LIB_SHA256 to be built-in
nfsd: nfserr_jukebox in nlm_fopen should lead to a retry
NFSD: Reduce DRC bucket size
NFSD: Delay adding new entries to LRU
SUNRPC: Move the svc_rpcb_cleanup() call sites
NFS: Remove rpcbind cleanup for NFSv4.0 callback
nfsd: unregister with rpcbind when deleting a transport
NFSD: Drop redundant conversion to bool
sunrpc: eliminate return pointer in svc_tcp_sendmsg()
sunrpc: fix pr_notice in svc_tcp_sendto() to show correct length
nfsd: decouple the xprtsec policy check from check_nfsd_access()
NFSD: Fix destination buffer size in nfsd4_ssc_setup_dul()
...
Since commit 22f72088ff ("tools headers: Update the syscall table with
the kernel sources") the arm64 syscall header is generated at build
time. Later, commit bfb713ea53 ("perf tools: Fix arm64 build by
generating unistd_64.h") added a dependency to libperf to guarantee that
this header was created before building libperf or perf itself.
However, libjvmti also requires this header but does not depend on
libperf, leading to build failures such as:
In file included from /usr/include/sys/syscall.h:24,
from /usr/include/syscall.h:1,
from jvmti/jvmti_agent.c:36:
tools/arch/arm64/include/uapi/asm/unistd.h:2:10: fatal error: asm/unistd_64.h: No such file or directory
2 | #include <asm/unistd_64.h>
Fix this by ensuring that libperf is built before libjvmti, so that
unistd_64.h is always available.
Fixes: 22f72088ff ("tools headers: Update the syscall table with the kernel sources")
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vincent Minet <v.minet@criteo.com>
Link: https://lore.kernel.org/r/20250922053702.2688374-1-v.minet@criteo.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We get a significant number of conflicts between net and net-next
because of selftests Makefile changes. People tend to append new
test cases at the end of the Makefile when there's no clear sort
order. Sort all networking selftests Makefiles, use the following
format:
VAR_NAME := \
entry1 \
entry2 \
entry3 \
# end of VAR_NAME
Some Makefiles are already pretty close to this.
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20251003210127.1021918-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We already only test each kcore map once, but on slow systems
(particularly with network filesystems) even the non-kcore maps are
slow.
The test can test the same objdump output over and over which only wastes
time. Generalize the skipping mechanism to track all DSOs and addresses
so that each section is only tested once.
On a fully loaded ARM Juno (simulating a parallel 'perf test' run) with
a network filesystem, the original runtime is:
real 1m51.126s
user 0m19.445s
sys 1m15.431s
And the new runtime is:
real 0m48.873s
user 0m8.031s
sys 0m32.353s
Committer testing:
# perf test "code read"
22: Object code reading : Ok
#
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
clang-18.1.3 on Ubuntu 24.04.2 reports warning:
thread_loop.c:41:23: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
41 | : /* in */ [i] "r" (i), [len] "r" (len)
| ^
thread_loop.c:37:8: note: use constraint modifier "w"
37 | "add %[i], %[i], #1\n"
| ^~~~
| %w[i]
thread_loop.c:41:23: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
41 | : /* in */ [i] "r" (i), [len] "r" (len)
| ^
thread_loop.c:37:14: note: use constraint modifier "w"
37 | "add %[i], %[i], #1\n"
| ^~~~
| %w[i]
thread_loop.c:41:23: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
41 | : /* in */ [i] "r" (i), [len] "r" (len)
| ^
thread_loop.c:38:8: note: use constraint modifier "w"
38 | "cmp %[i], %[len]\n"
| ^~~~
| %w[i]
thread_loop.c:41:38: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
41 | : /* in */ [i] "r" (i), [len] "r" (len)
| ^
thread_loop.c:38:14: note: use constraint modifier "w"
38 | "cmp %[i], %[len]\n"
| ^~~~~~
| %w[len]
Use the modifier "w" for 32-bit register access.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-6-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
