Since GITS_TYPER.PTA == 0, the ITS MAPC command demands a CPU ID,
rather than a physical redistributor address, for its RDbase
command argument.
As such, when MAPC-ing guest ITS collections, vgic_lpi_stress iterates
over CPU IDs in the range [0, nr_cpus), passing them as the RDbase
vcpu_id argument to its_send_mapc_cmd().
However, its_encode_target() in the its_send_mapc_cmd() selftest
handler expects RDbase arguments to be formatted with a 16 bit
offset, as shown by the 16-bit target_addr right shift its implementation:
its_mask_encode(&cmd->raw_cmd[2], target_addr >> 16, 51, 16)
At the moment, all CPU IDs passed into its_send_mapc_cmd() have no
offset, therefore becoming 0x0 after the bit shift. Thus, when
vgic_its_cmd_handle_mapc() receives the ITS command in vgic-its.c,
it always interprets the RDbase target CPU as CPU 0. All interrupts
sent to collections will be processed by vCPU 0, which defeats the
purpose of this multi-vCPU test.
Fix by creating procnum_to_rdbase() helper function, which left-shifts
the vCPU parameter received by its_send_mapc_cmd 16 bits before passing
it to its_encode_target for encoding.
Signed-off-by: Maximilian Dittgen <mdittgen@amazon.de>
Link: https://patch.msgid.link/20251020145946.48288-1-mdittgen@amazon.de
Signed-off-by: Marc Zyngier <maz@kernel.org>
Test that ICMP extensions are reported correctly when enabled and not
reported when disabled. Test both IPv4 and IPv6 and using different
packet sizes, to make sure trimming / padding works correctly.
Disable ICMP rate limiting (defaults to 1 per-second per-target) so that
the kernel will always generate ICMP errors when needed.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251027082232.232571-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In bareudp.sh, this script uses /bin/sh and it will load another lib.sh
BASH script at the very beginning.
But on some operating systems like Ubuntu, /bin/sh is actually pointed to
DASH, thus it will try to run BASH commands with DASH and consequently
leads to syntax issues:
# ./bareudp.sh: 4: ./lib.sh: Bad substitution
# ./bareudp.sh: 5: ./lib.sh: source: not found
# ./bareudp.sh: 24: ./lib.sh: Syntax error: "(" unexpected
Fix this by explicitly using BASH for bareudp.sh. This fixes test
execution failures on systems where /bin/sh is not BASH.
Reported-by: Edoardo Canepa <edoardo.canepa@canonical.com>
Link: https://bugs.launchpad.net/bugs/2129812
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20251027095710.2036108-2-po-hsu.lin@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Socket APIs like recvfrom(), accept(), and getsockname() expect socklen_t*
arg, but tests were using int variables. This causes -Wpointer-sign
warnings on platforms where socklen_t is unsigned.
Change the variable type from int to socklen_t to resolve the warning and
ensure type safety across platforms.
warning fixed:
sctp_collision.c:62:70: warning: passing 'int *' to parameter of
type 'socklen_t *' (aka 'unsigned int *') converts between pointers to
integer types with different sign [-Wpointer-sign]
62 | ret = recvfrom(sd, buf, sizeof(buf),
0, (struct sockaddr *)&daddr, &len);
| ^~~~
/usr/include/sys/socket.h:165:27: note: passing argument to
parameter '__addr_len' here
165 | socklen_t *__restrict __addr_len);
| ^
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Ankit Khushwaha <ankitkhushwaha.linux@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251028172947.53153-1-ankitkhushwaha.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In early days of YNL development dumping the NlMsg on errors
was quite useful, as the library itself could have been buggy.
These days increasingly the NlMsg is just taking up screen space
and means nothing to a typical user. Try to format the errors
more in line with how YNL C formats its errors strings.
Before:
$ ynl --family ethtool --do channels-set --json '{}'
Netlink error: Invalid argument
nl_len = 44 (28) nl_flags = 0x300 nl_type = 2
error: -22
extack: {'miss-type': 'header'}
$ ynl --family ethtool --do channels-set --json '{..., "tx-count": 999}'
Netlink error: Invalid argument
nl_len = 88 (72) nl_flags = 0x300 nl_type = 2
error: -22
extack: {'msg': 'requested channel count exceeds maximum', 'bad-attr': '.tx-count'}
After:
$ ynl --family ethtool --do channels-set --json '{}'
Netlink error: Invalid argument {'miss-type': 'header'}
$ ynl --family ethtool --do channels-set --json '{..., "tx-count": 999}'
Netlink error: requested channel count exceeds maximum: Invalid argument {'bad-attr': '.tx-count'}
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20251027192958.2058340-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add __vfio_pci_dma_*() helpers which return -errno from the underlying
ioctls.
Add __vfio_pci_dma_unmap_all() to test more unmapping code paths. Add an
out unmapped arg to report the unmapped byte size.
The existing vfio_pci_dma_*() functions, which are intended for
happy-path usage (assert on failure) are now thin wrappers on top of the
double-underscore helpers.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Alex Mastro <amastro@fb.com>
Link: https://lore.kernel.org/r/20251028-fix-unmap-v6-4-2542b96bcc8e@fb.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
When request a none support device operation, there will be no reply.
In this case, the len(desc) check will always be true, causing print_field
to enter an infinite loop and crash the program. Example reproducer:
# ethtool.py -c veth0
To fix this, return immediately if there is no reply.
Fixes: f3d07b02b2 ("tools: ynl: ethtool testing tool")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251024125853.102916-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ynl_attr_put_str() function was not including the null terminator
in the attribute length calculation. This caused kernel to reject
CTRL_CMD_GETFAMILY requests with EINVAL:
"Attribute failed policy validation".
For a 4-character family name like "dpll":
- Sent: nla_len=8 (4 byte header + 4 byte string without null)
- Expected: nla_len=9 (4 byte header + 5 byte string with null)
The bug was introduced in commit 15d2540e0d ("tools: ynl: check for
overflow of constructed messages") when refactoring from stpcpy() to
strlen(). The original code correctly included the null terminator:
end = stpcpy(ynl_attr_data(attr), str);
attr->nla_len = NLA_HDRLEN + NLA_ALIGN(end -
(char *)ynl_attr_data(attr));
Since stpcpy() returns a pointer past the null terminator, the length
included it. The refactored version using strlen() omitted the +1.
The fix also removes NLA_ALIGN() from nla_len calculation, since
nla_len should contain actual attribute length, not aligned length.
Alignment is only for calculating next attribute position. This makes
the code consistent with ynl_attr_put().
CTRL_ATTR_FAMILY_NAME uses NLA_NUL_STRING policy which requires
null terminator. Kernel validates with memchr() and rejects if not
found.
Fixes: 15d2540e0d ("tools: ynl: check for overflow of constructed messages")
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Link: https://lore.kernel.org/20251018151737.365485-3-zahari.doychev@linux.com
Link: https://patch.msgid.link/20251024132438.351290-1-poros@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that outgoing plaintext records respect the tls TLS_TX_MAX_PAYLOAD_LEN
set using setsockopt(). The limit is set to be 128, thus, in all received
records, the plaintext must not exceed this amount.
Also test that setting a new record size limit whilst a pending open
record exists is handled correctly by discarding the request.
Suggested-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20251022001937.20155-2-wilfred.opensource@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull objtool fixes from Borislav Petkov:
- Fix x32 build due to wrong format specifier on that sub-arch
- Add one more Rust noreturn function to objtool's list
* tag 'objtool_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix failure when being compiled on x32 system
objtool/rust: add one more `noreturn` Rust function
Fix to avoid the usage of the `ret` variable uninitialized in the
following macro expansions.
It solves the following warning:
In file included from netlink-dumps.c:21:
netlink-dumps.c: In function ‘dump_extack’:
../kselftest_harness.h:788:35: warning: ‘ret’ may be used uninitialized [-Wmaybe-uninitialized]
788 | intmax_t __exp_print = (intmax_t)__exp; \
| ^~~~~~~~~~~
../kselftest_harness.h:631:9: note: in expansion of macro ‘__EXPECT’
631 | __EXPECT(expected, #expected, seen, #seen, ==, 0)
| ^~~~~~~~
netlink-dumps.c:169:9: note: in expansion of macro ‘EXPECT_EQ’
169 | EXPECT_EQ(ret, FOUND_EXTACK);
| ^~~~~~~~~
The issue can be reproduced, building the tests, with the command:
make -C tools/testing/selftests TARGETS=net
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Link: https://patch.msgid.link/20251023205354.28249-1-alessandro.zanni87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from can. Slim pickings, I'm guessing people haven't
really started testing.
Current release - new code bugs:
- eth: mlx5e:
- psp: avoid 'accel' NULL pointer dereference
- skip PPHCR register query for FEC histogram if not supported
Previous releases - regressions:
- bonding: update the slave array for broadcast mode
- rtnetlink: re-allow deleting FDB entries in user namespace
- eth: dpaa2: fix the pointer passed to PTR_ALIGN on Tx path
Previous releases - always broken:
- can: drop skb on xmit if device is in listen-only mode
- gro: clear skb_shinfo(skb)->hwtstamps in napi_reuse_skb()
- eth: mlx5e
- RX, fix generating skb from non-linear xdp_buff if program
trims frags
- make devcom init failures non-fatal, fix races with IPSec
Misc:
- some documentation formatting 'fixes'"
* tag 'net-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5: Fix IPsec cleanup over MPV device
net/mlx5: Refactor devcom to return NULL on failure
net/mlx5e: Skip PPHCR register query if not supported by the device
net/mlx5: Add PPHCR to PCAM supported registers mask
virtio-net: zero unused hash fields
net: phy: micrel: always set shared->phydev for LAN8814
vsock: fix lock inversion in vsock_assign_transport()
ovpn: use datagram_poll_queue for socket readiness in TCP
espintcp: use datagram_poll_queue for socket readiness
net: datagram: introduce datagram_poll_queue for custom receive queues
net: bonding: fix possible peer notify event loss or dup issue
net: hsr: prevent creation of HSR device with slaves from another netns
sctp: avoid NULL dereference when chunk data buffer is missing
ptp: ocp: Fix typo using index 1 instead of i in SMA initialization loop
net: ravb: Ensure memory write completes before ringing TX doorbell
net: ravb: Enforce descriptor type ordering
net: hibmcge: select FIXED_PHY
net: dlink: use dev_kfree_skb_any instead of dev_kfree_skb
Documentation: networking: ax25: update the mailing list info.
net: gro_cells: fix lock imbalance in gro_cells_receive()
...
Fix compilation failure when compiling the kernel with the x32 toolchain.
In file included from check.c:16:
check.c: In function ¡check_abs_references¢:
/usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:47:17: error: format ¡%lx¢ expects argument of type ¡long unsigned int¢, but argument 7 has type ¡u64¢ {aka ¡long
long unsigned int¢} [-Werror=format=]
47 | "%s%s%s: objtool" extra ": " format "\n", \
| ^~~~~~~~~~~~~~~~~
/usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:54:9: note: in expansion of macro ¡___WARN¢
54 | ___WARN(severity, "", format, ##__VA_ARGS__)
| ^~~~~~~
/usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:74:27: note: in expansion of macro ¡__WARN¢
74 | #define WARN(format, ...) __WARN(WARN_STR, format, ##__VA_ARGS__)
| ^~~~~~
check.c:4713:33: note: in expansion of macro ¡WARN¢
4713 | WARN("section %s has absolute relocation at offset 0x%lx",
| ^~~~
Fixes: 0d6e4563fc ("objtool: Add action to check for absence of absolute relocations")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/1ac32fff-2e67-5155-f570-69aad5bf5412@redhat.com
Between Rust 1.79 and 1.86, under `CONFIG_RUST_KERNEL_DOCTESTS=y`,
`objtool` may report:
rust/doctests_kernel_generated.o: warning: objtool:
rust_doctest_kernel_alloc_kbox_rs_13() falls through to next
function rust_doctest_kernel_alloc_kvec_rs_0()
(as well as in rust_doctest_kernel_alloc_kvec_rs_0) due to calls to the
`noreturn` symbol:
core::option::expect_failed
from code added in commits 779db37373 ("rust: alloc: kvec: implement
AsPageIter for VVec") and 671618432f ("rust: alloc: kbox: implement
AsPageIter for VBox").
Thus add the mangled one to the list so that `objtool` knows it is
actually `noreturn`.
This can be reproduced as well in other versions by tweaking the code,
such as the latest stable Rust (1.90.0).
Stable does not have code that triggers this, but it could have it in
the future. Downstream forks could too. Thus tag it for backport.
See commit 56d680dd23 ("objtool/rust: list `noreturn` Rust functions")
for more details.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Cc: stable@vger.kernel.org # Needed in 6.12.y and later.
Link: https://patch.msgid.link/20251020020714.2511718-1-ojeda@kernel.org
sctp_vrf.sh could fail:
TEST 12: bind vrf-2 & 1 in server, connect from client 1 & 2, N [FAIL]
not ok 1 selftests: net: sctp_vrf.sh # exit=3
The failure happens when the server bind in a new run conflicts with an
existing association from the previous run:
[1] ip netns exec $SERVER_NS ./sctp_hello server ...
[2] ip netns exec $CLIENT_NS ./sctp_hello client ...
[3] ip netns exec $SERVER_NS pkill sctp_hello ...
[4] ip netns exec $SERVER_NS ./sctp_hello server ...
It occurs if the client in [2] sends a message and closes immediately.
With the message unacked, no SHUTDOWN is sent. Killing the server in [3]
triggers a SHUTDOWN the client also ignores due to the unacked message,
leaving the old association alive. This causes the bind at [4] to fail
until the message is acked and the client responds to a second SHUTDOWN
after the server’s T2 timer expires (3s).
This patch fixes the issue by preventing the client from sending data.
Instead, the client blocks on recv() and waits for the server to close.
It also waits until both the server and the client sockets are fully
released in stop_server and wait_client before restarting.
Additionally, replace 2>&1 >/dev/null with -q in sysctl and grep, and
drop other redundant 2>&1 >/dev/null redirections, and fix a typo from
N to Y (connect successfully) in the description of the last test.
Fixes: a61bd7b9fe ("selftests: add a selftest for sctp vrf")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/be2dacf52d0917c4ba5e2e8c5a9cb640740ad2b6.1760731574.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull bpf fixes from Alexei Starovoitov:
- Replace bpf_map_kmalloc_node() with kmalloc_nolock() to fix kmemleak
imbalance in tracking of bpf_async_cb structures (Alexei Starovoitov)
- Make selftests/bpf arg_parsing.c more robust to errors (Andrii
Nakryiko)
- Fix redefinition of 'off' as different kind of symbol when I40E
driver is builtin (Brahmajit Das)
- Do not disable preemption in bpf_test_run (Sahil Chandna)
- Fix memory leak in __lookup_instance error path (Shardul Bankar)
- Ensure test data is flushed to disk before reading it (Xing Guo)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Fix redefinition of 'off' as different kind of symbol
bpf: Do not disable preemption in bpf_test_run().
bpf: Fix memory leak in __lookup_instance error path
selftests: arg_parsing: Ensure data is flushed to disk before reading.
bpf: Replace bpf_map_kmalloc_node() with kmalloc_nolock() to allocate bpf_async_cb structures.
selftests/bpf: make arg_parsing.c more robust to crashes
bpf: test_run: Fix ctx leak in bpf_prog_test_run_xdp error path
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the handling of ZCR_EL2 in NV VMs
- Pick the correct translation regime when doing a PTW on the back of
a SEA
- Prevent userspace from injecting an event into a vcpu that isn't
initialised yet
- Move timer save/restore to the sysreg handling code, fixing EL2
timer access in the process
- Add FGT-based trapping of MDSCR_EL1 to reduce the overhead of debug
- Fix trapping configuration when the host isn't GICv3
- Improve the detection of HCR_EL2.E2H being RES1
- Drop a spurious 'break' statement in the S1 PTW
- Don't try to access SPE when owned by EL3
Documentation updates:
- Document the failure modes of event injection
- Document that a GICv3 guest can be created on a GICv5 host with
FEAT_GCIE_LEGACY
Selftest improvements:
- Add a selftest for the effective value of HCR_EL2.AMO
- Address build warning in the timer selftest when building with
clang
- Teach irqfd selftests about non-x86 architectures
- Add missing sysregs to the set_id_regs selftest
- Fix vcpu allocation in the vgic_lpi_stress selftest
- Correctly enable interrupts in the vgic_lpi_stress selftest
x86:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test
for the bug fixed by commit 3ccbf6f470 ("KVM: x86/mmu: Return
-EAGAIN if userspace deletes/moves memslot during prefault")
- Don't try to get PMU capabilities from perf when running a CPU with
hybrid CPUs/PMUs, as perf will rightly WARN.
guest_memfd:
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a
more generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to
explicitly set said flag to initialize memory as SHARED,
irrespective of MMAP.
The behavior merged in 6.18 is that enabling mmap() implicitly
initializes memory as SHARED, which would result in an ABI
collision for x86 CoCo VMs as their memory is currently always
initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with
private memory, to enable testing such setups, i.e. to hopefully
flush out any other lurking ABI issues before 6.18 is officially
released.
- Add testcases to the guest_memfd selftest to cover guest_memfd
without MMAP, and host userspace accesses to mmap()'d private
memory"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
arm64: Revamp HCR_EL2.E2H RES1 detection
KVM: arm64: nv: Use FGT write trap of MDSCR_EL1 when available
KVM: arm64: Compute per-vCPU FGTs at vcpu_load()
KVM: arm64: selftests: Fix misleading comment about virtual timer encoding
KVM: arm64: selftests: Add an E2H=0-specific configuration to get_reg_list
KVM: arm64: selftests: Make dependencies on VHE-specific registers explicit
KVM: arm64: Kill leftovers of ad-hoc timer userspace access
KVM: arm64: Fix WFxT handling of nested virt
KVM: arm64: Move CNT*CT_EL0 userspace accessors to generic infrastructure
KVM: arm64: Move CNT*_CVAL_EL0 userspace accessors to generic infrastructure
KVM: arm64: Move CNT*_CTL_EL0 userspace accessors to generic infrastructure
KVM: arm64: Add timer UAPI workaround to sysreg infrastructure
KVM: arm64: Make timer_set_offset() generally accessible
KVM: arm64: Replace timer context vcpu pointer with timer_id
KVM: arm64: Introduce timer_context_to_vcpu() helper
KVM: arm64: Hide CNTHV_*_EL2 from userspace for nVHE guests
Documentation: KVM: Update GICv3 docs for GICv5 hosts
KVM: arm64: gic-v3: Only set ICH_HCR traps for v2-on-v3 or v3 guests
KVM: arm64: selftests: Actually enable IRQs in vgic_lpi_stress
KVM: arm64: selftests: Allocate vcpus with correct size
...
KVM x86 fixes for 6.18:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test for the
bug fixed by commit 3ccbf6f470 ("KVM: x86/mmu: Return -EAGAIN if userspace
deletes/moves memslot during prefault")
- Don't try to get PMU capabbilities from perf when running a CPU with hybrid
CPUs/PMUs, as perf will rightly WARN.
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a more
generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to explicitly set
said flag to initialize memory as SHARED, irrespective of MMAP. The
behavior merged in 6.18 is that enabling mmap() implicitly initializes
memory as SHARED, which would result in an ABI collision for x86 CoCo VMs
as their memory is currently always initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with private
memory, to enable testing such setups, i.e. to hopefully flush out any
other lurking ABI issues before 6.18 is officially released.
- Add testcases to the guest_memfd selftest to cover guest_memfd without MMAP,
and host userspace accesses to mmap()'d private memory.
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-10-16
We've added 6 non-merge commits during the last 1 day(s) which contain
a total of 18 files changed, 577 insertions(+), 38 deletions(-).
The main changes are:
1) Bypass the global per-protocol memory accounting either by setting
a netns sysctl or using bpf_setsockopt in a bpf program,
from Kuniyuki Iwashima.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Add test for sk->sk_bypass_prot_mem.
bpf: Introduce SK_BPF_BYPASS_PROT_MEM.
bpf: Support bpf_setsockopt() for BPF_CGROUP_INET_SOCK_CREATE.
net: Introduce net.core.bypass_prot_mem sysctl.
net: Allow opt-out from global protocol memory accounting.
tcp: Save lock_sock() for memcg in inet_csk_accept().
====================
Link: https://patch.msgid.link/20251016204539.773707-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This fixes the following build error
CLNG-BPF [test_progs] verifier_global_ptr_args.bpf.o
progs/verifier_global_ptr_args.c:228:5: error: redefinition of 'off' as
different kind of symbol
228 | u32 off;
| ^
The symbol 'off' was previously defined in
tools/testing/selftests/bpf/tools/include/vmlinux.h, which includes an
enum i40e_ptp_gpio_pin_state from
drivers/net/ethernet/intel/i40e/i40e_ptp.c:
enum i40e_ptp_gpio_pin_state {
end = -2,
invalid = -1,
off = 0,
in_A = 1,
in_B = 2,
out_A = 3,
out_B = 4,
};
This enum is included when CONFIG_I40E is enabled. As of commit
032676ff82 ("LoongArch: Update Loongson-3 default config file"),
CONFIG_I40E is set in the defconfig, which leads to the conflict.
Renaming the local variable avoids the redefinition and allows the
build to succeed.
Suggested-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20251017171551.53142-1-listout@listout.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test does the following for IPv4/IPv6 x TCP/UDP sockets
with/without sk->sk_bypass_prot_mem, which can be turned on by
net.core.bypass_prot_mem or bpf_setsockopt(SK_BPF_BYPASS_PROT_MEM).
1. Create socket pairs
2. Send NR_PAGES (32) of data (TCP consumes around 35 pages,
and UDP consuems 66 pages due to skb overhead)
3. Read memory_allocated from sk->sk_prot->memory_allocated and
sk->sk_prot->memory_per_cpu_fw_alloc
4. Check if unread data is charged to memory_allocated
If sk->sk_bypass_prot_mem is set, memory_allocated should not be
changed, but we allow a small error (up to 10 pages) in case
other processes on the host use some amounts of TCP/UDP memory.
The amount of allocated pages are buffered to per-cpu variable
{tcp,udp}_memory_per_cpu_fw_alloc up to +/- net.core.mem_pcpu_rsv
before reported to {tcp,udp}_memory_allocated.
At 3., memory_allocated is calculated from the 2 variables at
fentry of socket create function.
We drain the receive queue only for UDP before close() because UDP
recv queue is destroyed after RCU grace period. When I printed
memory_allocated, UDP bypass cases sometimes saw the no-bypass
case's leftover, but it's still in the small error range (<10 pages).
bpf_trace_printk: memory_allocated: 0 <-- TCP no-bypass
bpf_trace_printk: memory_allocated: 35
bpf_trace_printk: memory_allocated: 0 <-- TCP w/ sysctl
bpf_trace_printk: memory_allocated: 0
bpf_trace_printk: memory_allocated: 0 <-- TCP w/ bpf
bpf_trace_printk: memory_allocated: 0
bpf_trace_printk: memory_allocated: 0 <-- UDP no-bypass
bpf_trace_printk: memory_allocated: 66
bpf_trace_printk: memory_allocated: 2 <-- UDP w/ sysctl (2 pages leftover)
bpf_trace_printk: memory_allocated: 2
bpf_trace_printk: memory_allocated: 2 <-- UDP w/ bpf (2 pages leftover)
bpf_trace_printk: memory_allocated: 2
We prefer finishing tests faster than oversleeping for call_rcu()
+ sk_destruct().
The test completes within 2s on QEMU (64 CPUs) w/ KVM.
# time ./test_progs -t sk_bypass
#371/1 sk_bypass_prot_mem/TCP :OK
#371/2 sk_bypass_prot_mem/UDP :OK
#371/3 sk_bypass_prot_mem/TCPv6:OK
#371/4 sk_bypass_prot_mem/UDPv6:OK
#371 sk_bypass_prot_mem:OK
Summary: 1/4 PASSED, 0 SKIPPED, 0 FAILED
real 0m1.481s
user 0m0.181s
sys 0m0.441s
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://patch.msgid.link/20251014235604.3057003-7-kuniyu@google.com
If a socket has sk->sk_bypass_prot_mem flagged, the socket opts out
of the global protocol memory accounting.
This is easily controlled by net.core.bypass_prot_mem sysctl, but it
lacks flexibility.
Let's support flagging (and clearing) sk->sk_bypass_prot_mem via
bpf_setsockopt() at the BPF_CGROUP_INET_SOCK_CREATE hook.
int val = 1;
bpf_setsockopt(ctx, SOL_SOCKET, SK_BPF_BYPASS_PROT_MEM,
&val, sizeof(val));
As with net.core.bypass_prot_mem, this is inherited to child sockets,
and BPF always takes precedence over sysctl at socket(2) and accept(2).
SK_BPF_BYPASS_PROT_MEM is only supported at BPF_CGROUP_INET_SOCK_CREATE
and not supported on other hooks for some reasons:
1. UDP charges memory under sk->sk_receive_queue.lock instead
of lock_sock()
2. Modifying the flag after skb is charged to sk requires such
adjustment during bpf_setsockopt() and complicates the logic
unnecessarily
We can support other hooks later if a real use case justifies that.
Most changes are inline and hard to trace, but a microbenchmark on
__sk_mem_raise_allocated() during neper/tcp_stream showed that more
samples completed faster with sk->sk_bypass_prot_mem == 1. This will
be more visible under tcp_mem pressure (but it's not a fair comparison).
# bpftrace -e 'kprobe:__sk_mem_raise_allocated { @start[tid] = nsecs; }
kretprobe:__sk_mem_raise_allocated /@start[tid]/
{ @end[tid] = nsecs - @start[tid]; @times = hist(@end[tid]); delete(@start[tid]); }'
# tcp_stream -6 -F 1000 -N -T 256
Without bpf prog:
[128, 256) 3846 | |
[256, 512) 1505326 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[512, 1K) 1371006 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[1K, 2K) 198207 |@@@@@@ |
[2K, 4K) 31199 |@ |
With bpf prog in the next patch:
(must be attached before tcp_stream)
# bpftool prog load sk_bypass_prot_mem.bpf.o /sys/fs/bpf/test type cgroup/sock_create
# bpftool cgroup attach /sys/fs/cgroup/test cgroup_inet_sock_create pinned /sys/fs/bpf/test
[128, 256) 6413 | |
[256, 512) 1868425 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[512, 1K) 1101697 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[1K, 2K) 117031 |@@@@ |
[2K, 4K) 11773 | |
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://patch.msgid.link/20251014235604.3057003-6-kuniyu@google.com
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN
Current release - regressions:
- udp: do not use skb_release_head_state() before
skb_attempt_defer_free()
- gro_cells: use nested-BH locking for gro_cell
- dpll: zl3073x: increase maximum size of flash utility
Previous releases - regressions:
- core: fix lockdep splat on device unregister
- tcp: fix tcp_tso_should_defer() vs large RTT
- tls:
- don't rely on tx_work during send()
- wait for pending async decryptions if tls_strp_msg_hold fails
- can: j1939: add missing calls in NETDEV_UNREGISTER notification
handler
- eth: lan78xx: fix lost EEPROM write timeout in
lan78xx_write_raw_eeprom
Previous releases - always broken:
- ip6_tunnel: prevent perpetual tunnel growth
- dpll: zl3073x: handle missing or corrupted flash configuration
- can: m_can: fix pm_runtime and CAN state handling
- eth:
- ixgbe: fix too early devlink_free() in ixgbe_remove()
- ixgbevf: fix mailbox API compatibility
- gve: Check valid ts bit on RX descriptor before hw timestamping
- idpf: cleanup remaining SKBs in PTP flows
- r8169: fix packet truncation after S4 resume on RTL8168H/RTL8111H"
* tag 'net-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
udp: do not use skb_release_head_state() before skb_attempt_defer_free()
net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset
netdevsim: set the carrier when the device goes up
selftests: tls: add test for short splice due to full skmsg
selftests: net: tls: add tests for cmsg vs MSG_MORE
tls: don't rely on tx_work during send()
tls: wait for pending async decryptions if tls_strp_msg_hold fails
tls: always set record_type in tls_process_cmsg
tls: wait for async encrypt in case of error during latter iterations of sendmsg
tls: trim encrypted message to match the plaintext on short splice
tg3: prevent use of uninitialized remote_adv and local_adv variables
MAINTAINERS: new entry for IPv6 IOAM
gve: Check valid ts bit on RX descriptor before hw timestamping
net: core: fix lockdep splat on device unregister
MAINTAINERS: add myself as maintainer for b53
selftests: net: check jq command is supported
net: airoha: Take into account out-of-order tx completions in airoha_dev_xmit()
tcp: fix tcp_tso_should_defer() vs large RTT
r8152: add error handling in rtl8152_driver_init
usbnet: Fix using smp_processor_id() in preemptible code warnings
...
test_parse_test_list_file writes some data to
/tmp/bpf_arg_parsing_test.XXXXXX and parse_test_list_file() will read
the data back. However, after writing data to that file, we forget to
call fsync() and it's causing testing failure in my laptop. This patch
helps fix it by adding the missing fsync() call.
Fixes: 64276f01dc ("selftests/bpf: Test_progs can read test lists from file")
Signed-off-by: Xing Guo <higuoxing@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251016035330.3217145-1-higuoxing@gmail.com
Add a simple test for the corner case not currently covered by the
sticky fingers quirk. Because it's a corner case test, we only test this
on a couple of devices, not on all of them because the value of adding
the same test over and over is rather moot.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Convert test_cpu to use the newly added values_close_report() helper
to print detailed diagnostics when a tolerance check fails. This
provides clearer insight into deviations while run in the CI.
Signed-off-by: Sebastian Chlad <sebastian.chlad@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Some cgroup selftests, such as test_cpu, occasionally fail by a very
small margin and if run in the CI context, it is useful to have detailed
diagnostic output to understand the deviation.
Introduce a values_close_report() helper which performs the same
comparison as values_close(), but prints detailed information when the
values differ beyond the allowed tolerance.
Signed-off-by: Sebastian Chlad <sebastian.chlad@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We started getting a crash in BPF CI, which seems to originate from
test_parse_test_list_file() test and is happening at this line:
ASSERT_OK(strcmp("test_with_spaces", set.tests[0].name), "test 0 name");
One way we can crash there is if set.cnt zero, which is checked for with
ASSERT_EQ() above, but we proceed after this regardless of the outcome.
Instead of crashing, we should bail out with test failure early.
Similarly, if parse_test_list_file() fails, we shouldn't be even looking
at set, so bail even earlier if ASSERT_OK() fails.
Fixes: 64276f01dc ("selftests/bpf: Test_progs can read test lists from file")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20251014202037.72922-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The jq command is used in vlan_bridge_binding.sh, if it is not supported,
the test will spam the following log.
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# TEST: Test bridge_binding on->off when lower down [FAIL]
# Got operstate of , expected 0
The rtnetlink.sh has the same problem. It makes sense to check if jq is
installed before running these tests. After this patch, the
vlan_bridge_binding.sh skipped if jq is not supported:
# timeout set to 3600
# selftests: net: vlan_bridge_binding.sh
# TEST: jq not installed [SKIP]
Fixes: dca12e9ab7 ("selftests: net: Add a VLAN bridge binding selftest")
Fixes: 6a414fd77f ("selftests: rtnetlink: Add an address proto test")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251013080039.3035898-1-wangliang74@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The userspace-visible encoding for CNTV_CVAL_EL0 and CNTVCNT_EL0
have been swapped for as long as usersapce has had access to the
registers. This is documented in arch/arm64/include/uapi/asm/kvm.h.
Despite that, the get_reg_list test has unhelpful comments indicating
the wrong register for the encoding.
Replace this with definitions exposed in the include file, and
a comment explaining again the brokenness.
Signed-off-by: Marc Zyngier <maz@kernel.org>
