To reduce the boilerplate code, refactor futex_wait test to use
kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_wait_private_mapped_file
test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_wait_unitialized_heap
test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_wait_wouldblock test to
use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_wait_timeout test to use
kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_requeue_pi_signal_restart
test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_requeue_pi_mismatched_ops
test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_requeue_pi test to use
kselftest_harness header instead of futex's logging header.
Use kselftest fixture feature to make it easy to repeat the same test
with different parameters. With that, drop all repetitive test calls
from run.sh.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Create ksft_print_dbg_msg() so testers can enable extra debug messages
when running a test with the flag -d.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* kvm-arm64/el2-feature-control: (23 commits)
: .
: General rework of EL2 features that can be disabled to satisfy
: the requirement of migration between heterogeneous hosts:
:
: - Handle effective RES0 behaviour of undefined registers, making sure
: that disabling a feature affects full registeres, and not just
: individual control bits. (20250918151402.1665315-1-maz@kernel.org)
:
: - Allow ID_AA64MMFR1_EL1.{TWED,HCX} to be disabled from userspace.
: (20250911114621.3724469-1-yangjinqian1@huawei.com)
:
: - Turn the NV feature management into a deny-list, and expose
: missing features to EL2 guests.
: (20250912212258.407350-1-oliver.upton@linux.dev)
: .
KVM: arm64: nv: Expose up to FEAT_Debugv8p8 to NV-enabled VMs
KVM: arm64: nv: Advertise FEAT_TIDCP1 to NV-enabled VMs
KVM: arm64: nv: Advertise FEAT_SpecSEI to NV-enabled VMs
KVM: arm64: nv: Expose FEAT_TWED to NV-enabled VMs
KVM: arm64: nv: Exclude guest's TWED configuration when TWE isn't set
KVM: arm64: nv: Expose FEAT_AFP to NV-enabled VMs
KVM: arm64: nv: Expose FEAT_ECBHB to NV-enabled VMs
KVM: arm64: nv: Expose FEAT_RASv1p1 via RAS_frac
KVM: arm64: nv: Expose FEAT_DF2 to NV-enabled VMs
KVM: arm64: nv: Don't erroneously claim FEAT_DoubleLock for NV VMs
KVM: arm64: nv: Convert masks to denylists in limit_nv_id_reg()
KVM: arm64: selftests: Test writes to ID_AA64MMFR1_EL1.{HCX, TWED}
KVM: arm64: Make ID_AA64MMFR1_EL1.{HCX, TWED} writable from userspace
KVM: arm64: Convert MDCR_EL2 RES0 handling to compute_reg_res0_bits()
KVM: arm64: Convert SCTLR_EL1 RES0 handling to compute_reg_res0_bits()
KVM: arm64: Enforce absence of FEAT_TCR2 on TCR2_EL2
KVM: arm64: Enforce absence of FEAT_SCTLR2 on SCTLR2_EL{1,2}
KVM: arm64: Convert HCR_EL2 RES0 handling to compute_reg_res0_bits()
KVM: arm64: Enforce absence of FEAT_HCX on HCRX_EL2
KVM: arm64: Enforce absence of FEAT_FGT2 on FGT2 registers
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add a basic test corrupting a level-2 table entry to check that
the resulting abort is a SEA on a PTW at level-3.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
ASoC: Updates for v6.18
A relatively quiet release for ASoC, we've had a lot of maintainance
work going on and several new drivers but really the most remarkable
thing is that we removed a driver, the WL1273 driver used in some old
Nokia systems that have had the underlying system support removed from
the kernel.
- Morimoto-san continues his work on cleanups of the core APIs and
enforcement of abstraction layers.
- Lots of cleanups and conversions of DT bindings.
- Substantial maintainance work on the Intel AVS drivers.
- Support for Qualcomm Glymur and PM4125, Realtek RT1321, Shanghai
FourSemi FS2104/5S, Texas Instruments PCM1754.
- Remove support for TI WL1273.
When UBLK_F_BUF_REG_OFF_DAEMON was added, we missed updating kublk's
feat_map, which results in the feature being reported as "unknown." Add
UBLK_F_BUF_REG_OFF_DAEMON to feat_map to fix this.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Simplify the definition of feat_map by introducing a helper macro
FEAT_NAME to avoid having to type the feature name twice. As a side
effect, this changes the names in the feature list to be the full macro
name instead of the abbreviated names that were used before, but this is
a good change for clarity.
Using the full feature macro names ruins the alignment of the output, so
change the output format to put each feature's hex value before its
name, as this is easier to align nicely. The output now looks as
follows:
root# ./kublk features
ublk_drv features: 0x7fff
0x1 : UBLK_F_SUPPORT_ZERO_COPY
0x2 : UBLK_F_URING_CMD_COMP_IN_TASK
0x4 : UBLK_F_NEED_GET_DATA
0x8 : UBLK_F_USER_RECOVERY
0x10 : UBLK_F_USER_RECOVERY_REISSUE
0x20 : UBLK_F_UNPRIVILEGED_DEV
0x40 : UBLK_F_CMD_IOCTL_ENCODE
0x80 : UBLK_F_USER_COPY
0x100 : UBLK_F_ZONED
0x200 : UBLK_F_USER_RECOVERY_FAIL_IO
0x400 : UBLK_F_UPDATE_SIZE
0x800 : UBLK_F_AUTO_BUF_REG
0x1000 : UBLK_F_QUIESCE
0x2000 : UBLK_F_PER_IO_DAEMON
0x4000 : unknown
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- simple propagation of read/write marks;
- joining read/write marks from conditional branches;
- avoid must_write marks in when same instruction accesses different
stack offsets on different execution paths;
- avoid must_write marks in case same instruction accesses stack
and non-stack pointers on different execution paths;
- read/write marks propagation to outer stack frame;
- independent read marks for different callchains ending with the same
function;
- bpf_calls_callback() dependent logic in
liveness.c:bpf_stack_slot_alive().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250918-callchain-sensitive-liveness-v3-12-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds tags __not_msg(<msg>) and __not_msg_unpriv(<msg>).
Test fails if <msg> is found in verifier log.
If __msg_not() is situated between __msg() tags framework matches
__msg() tags first, and then checks that <msg> is not present in a
portion of a log between bracketing __msg() tags.
__msg_not() tags bracketed by a same __msg() group are effectively
unordered.
The idea is borrowed from LLVM's CheckFile with its CHECK-NOT syntax.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250918-callchain-sensitive-liveness-v3-11-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove register chain based liveness tracking:
- struct bpf_reg_state->{parent,live} fields are no longer needed;
- REG_LIVE_WRITTEN marks are superseded by bpf_mark_stack_write()
calls;
- mark_reg_read() calls are superseded by bpf_mark_stack_read();
- log.c:print_liveness() is superseded by logging in liveness.c;
- propagate_liveness() is superseded by bpf_update_live_stack();
- no need to establish register chains in is_state_visited() anymore;
- fix a bunch of tests expecting "_w" suffixes in verifier log
messages.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250918-callchain-sensitive-liveness-v3-9-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Assert that the EL2 features {HCX, TWED} of ID_AA64MMFR1_EL1 are writable
from userspace. They are only allowed to be downgraded in userspace.
Signed-off-by: Jinqian Yang <yangjinqian1@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add a bunch of selftests for namespace file handles.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This feature has no traps associated with it so the SIGILL is not reliable.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Currently only array maps are supported, but the implementation can be
extended for other maps and objects. The hash is memoized only for
exclusive and frozen maps as their content is stable until the exclusive
program modifies the map.
This is required for BPF signing, enabling a trusted loader program to
verify a map's integrity. The loader retrieves
the map's runtime hash from the kernel and compares it against an
expected hash computed at build time.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/r/20250914215141.15144-7-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a README file for RISC-V specific kernel selftests under
tools/testing/selftests/riscv/. This mirrors the existing README
for arm64, providing clear guidance on how the tests are architecture
specific and skipped on non-riscv systems. It also includes
standard make commands for building, running and installing the
tests, along with a reference to general kselftest documentation.
Signed-off-by: Bala-Vignesh-Reddy <reddybalavignesh9979@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20250815180724.14459-1-reddybalavignesh9979@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Currently, KF_RCU_PROTECTED only applies to iterator APIs and that too
in a convoluted fashion: the presence of this flag on the kfunc is used
to set MEM_RCU in iterator type, and the lack of RCU protection results
in an error only later, once next() or destroy() methods are invoked on
the iterator. While there is no bug, this is certainly a bit
unintuitive, and makes the enforcement of the flag iterator specific.
In the interest of making this flag useful for other upcoming kfuncs,
e.g. scx_bpf_cpu_curr() [0][1], add enforcement for invoking the kfunc
in an RCU critical section in general.
This would also mean that iterator APIs using KF_RCU_PROTECTED will
error out earlier, instead of throwing an error for lack of RCU CS
protection when next() or destroy() methods are invoked.
In addition to this, if the kfuncs tagged KF_RCU_PROTECTED return a
pointer value, ensure that this pointer value is only usable in an RCU
critical section. There might be edge cases where the return value is
special and doesn't need to imply MEM_RCU semantics, but in general, the
assumption should hold for the majority of kfuncs, and we can revisit
things if necessary later.
[0]: https://lore.kernel.org/all/20250903212311.369697-3-christian.loehle@arm.com
[1]: https://lore.kernel.org/all/20250909195709.92669-1-arighi@nvidia.com
Tested-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250917032755.4068726-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add changes to delay the allocation and setup of dports until when the
endpoint device is being probed. At this point, the CXL link is
established from endpoint to host bridge. Addresses issues seen on
some platforms when dports are probed earlier.
Link: https://lore.kernel.org/linux-cxl/20250829180928.842707-1-dave.jiang@intel.com/
Cross-merge networking fixes after downstream PR (net-6.17-rc7).
No conflicts.
Adjacent changes:
drivers/net/ethernet/mellanox/mlx5/core/en/fs.h
9536fbe10c ("net/mlx5e: Add PSP steering in local NIC RX")
7601a0a462 ("net/mlx5e: Add a miss level for ipsec crypto offload")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cxl_test uses mock functions for decoder enumaration. Add initialization
of the cxld->target_map[] for cxl_test based decoders in the mock
functions.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
With devm_cxl_switch_port_decoders_setup() being called within cxl_core
instead of by the port driver probe, adjustments are needed to deal with
circular symbol dependency when this function is being mock'd. Add the
appropriate changes to get around the circular dependency.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
devm_cxl_add_dport_by_dev() outside of cxl_test is done through PCI
hierarchy. However with cxl_test, it needs to be done through the
platform device hierarchy. Add the mock function for
devm_cxl_add_dport_by_dev().
When cxl_core calls a cxl_core exported function and that function is
mocked by cxl_test, the call chain causes a circular dependency issue. Dan
provided a workaround to avoid this issue. Apply the method to changes from
the late dport allocation changes in order to enable cxl-test.
In cxl_core they are defined with "__" added in front of the function. A
macro is used to define the original function names for when non-test
version of the kernel is built. A bit of macros and typedefs are used to
allow mocking of those functions in cxl_test.
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Group the decoder setup code in switch and endpoint port probe into a
single function for each to reduce the number of functions to be mocked
in cxl_test. Introduce devm_cxl_switch_port_decoders_setup() and
devm_cxl_endpoint_decoders_setup(). These two functions will be mocked
instead with some functions optimized out since the mock version does
not do anything. Remove devm_cxl_setup_hdm(),
devm_cxl_add_passthrough_decoder(), and devm_cxl_enumerate_decoders() in
cxl_test mock code. In turn, mock_cxl_add_passthrough_decoder() can be
removed since cxl_test does not setup passthrough decoders.
__wrap_cxl_hdm_decode_init() and __wrap_cxl_dvsec_rr_decode() can be
removed as well since they only return 0 when called.
[dj: drop 'struct cxl_port' forward declaration (Robert)]
Suggested-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add a test which verifies that NT_ARM_SVE and NT_ARM_SSVE reads and writes
are rejected as expected when the relevant architecture feature is not
supported.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
We do not currently have a test that asserts that we reject attempts to set
a vector length smaller than SVE_VL_MIN or larger than SVE_VL_MAX, add one
since that is our current behaviour.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
The test reproduces the scenario explained in the previous patch.
Without the patch, the test triggers the warning and cannot see the last
retransmitted packet.
# ./ksft_runner.sh tcp_fastopen_server_reset-after-disconnect.pkt
TAP version 13
1..2
[ 29.229250] ------------[ cut here ]------------
[ 29.231414] WARNING: CPU: 26 PID: 0 at net/ipv4/tcp_timer.c:542 tcp_retransmit_timer+0x32/0x9f0
...
tcp_fastopen_server_reset-after-disconnect.pkt:26: error handling packet: Timed out waiting for packet
not ok 1 ipv4
tcp_fastopen_server_reset-after-disconnect.pkt:26: error handling packet: Timed out waiting for packet
not ok 2 ipv6
# Totals: pass:0 fail:2 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250915175800.118793-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a test case minimized from a syzbot reproducer from [1].
The test case triggers verifier.c:maybe_exit_scc() w/o
preceding call to verifier.c:maybe_enter_scc() on a speculative
symbolic execution path.
Here is verifier log for the test case:
Live regs before insn:
0: .......... (b7) r0 = 100
1 1: 0......... (7b) *(u64 *)(r10 -512) = r0
1 2: 0......... (b5) if r0 <= 0x0 goto pc-2
3: 0......... (95) exit
0: R1=ctx() R10=fp0
0: (b7) r0 = 100 ; R0_w=100
1: (7b) *(u64 *)(r10 -512) = r0 ; R0_w=100 R10=fp0 fp-512_w=100
2: (b5) if r0 <= 0x0 goto pc-2
mark_precise: ...
2: R0_w=100
3: (95) exit
from 2 to 1 (speculative execution): R0_w=scalar() R1=ctx() R10=fp0 fp-512_w=100
1: R0_w=scalar() R1=ctx() R10=fp0 fp-512_w=100
1: (7b) *(u64 *)(r10 -512) = r0
processed 5 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
- Non-speculative execution path 0-3 does not allocate any checkpoints
(and hence does not call maybe_enter_scc()), and schedules a
speculative jump from 2 to 1.
- Speculative execution path stops immediately because of an infinite
loop detection and triggers verifier.c:update_branch_counts() ->
maybe_exit_scc() calls.
[1] https://lore.kernel.org/bpf/68c85acd.050a0220.2ff435.03a4.GAE@google.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250916212251.3490455-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After using numa_set_mempolicy_home_node() the test fails to compile on
systems with libnuma library versioned lower than 2.0.16.
In order to allow lower library version add a pkg-config related check
and exclude that part of the code. Without the proper MPOL setup it
can't be tested.
Make a total number of tests two. The first one is the first batch and
the second is the MPOL related one. The goal is to let the user know if
it has been skipped due to library limitation.
Remove test_futex_mpol(), it was unused and it is now complained by the
compiler if the part is not compiled.
Fixes: 0ecb4232fc ("selftests/futex: Set the home_node in futex_numa_mpol")
Closes: https://lore.kernel.org/oe-lkp/202507150858.bedaf012-lkp@intel.com
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Commit d8e2f91999 ("selftests/futex: Fix some futex_numa_mpol
subtests") removed the "Memory out of range" subtest due to it being
dependent on the memory layout of the test process having an invalid
memory address just after the `*futex_ptr` allocated memory.
Reintroduce this test and make it deterministic, by allocation two
memory pages and marking the second one with PROT_NONE.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Instead of just checking if the syscall failed as expected, check as
well if the returned error code matches the expected error code.
[ bigeasy: reword the commmit message ]
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Add a cached copy of the hardware port-id list that is available at init
before all @dport objects have been instantiated. Change is in preparation
of delayed dport instantiation.
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
basic-gcs has it's own make rule to handle the special compiler
invocation to build against nolibc. This rule does not respect the
$(CFLAGS) passed by the Makefile from the parent directory.
However these $(CFLAGS) set up the include path to include the UAPI
headers from the current kernel.
Due to this the asm/hwcap.h header is used from the toolchain instead of
the UAPI and the definition of HWCAP_GCS is not found.
Restructure the rule for basic-gcs to respect the $(CFLAGS).
Also drop those options which are already provided by $(CFLAGS).
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/lkml/CA+G9fYv77X+kKz2YT6xw7=9UrrotTbQ6fgNac7oohOg8BgGvtw@mail.gmail.com/
Fixes: a985fe6383 ("kselftest/arm64/gcs: Use nolibc's getauxval()")
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
We also need coverage for when the malicious user is not using the
proper ioctls definitions and tries to work around the driver.
Most of the scaffholding has been generated by claude-4-sonnet and then
carefully reviewed.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
