The test will set the global system THP setting to never, madvise or
always depending on the fixture variant and the 2M setting to inherit
before it starts (and reset to original at teardown). The fixture setup
will also test if PR_SET_THP_DISABLE prctl call can be made with
PR_THP_DISABLE_EXCEPT_ADVISED and skip if it fails.
This tests if the process can:
- successfully get the policy to disable THPs expect for madvise.
- get hugepages only on MADV_HUGE and MADV_COLLAPSE if the global policy
is madvise/always and only with MADV_COLLAPSE if the global policy is
never.
- successfully reset the policy of the process.
- after reset, only get hugepages with:
- MADV_COLLAPSE when policy is set to never.
- MADV_HUGE and MADV_COLLAPSE when policy is set to madvise.
- always when policy is set to "always".
- never get a THP with MADV_NOHUGEPAGE.
- repeat the above tests in a forked process to make sure the policy is
carried across forks.
Test results:
./prctl_thp_disable
TAP version 13
1..12
ok 1 prctl_thp_disable_completely.never.nofork
ok 2 prctl_thp_disable_completely.never.fork
ok 3 prctl_thp_disable_completely.madvise.nofork
ok 4 prctl_thp_disable_completely.madvise.fork
ok 5 prctl_thp_disable_completely.always.nofork
ok 6 prctl_thp_disable_completely.always.fork
ok 7 prctl_thp_disable_except_madvise.never.nofork
ok 8 prctl_thp_disable_except_madvise.never.fork
ok 9 prctl_thp_disable_except_madvise.madvise.nofork
ok 10 prctl_thp_disable_except_madvise.madvise.fork
ok 11 prctl_thp_disable_except_madvise.always.nofork
ok 12 prctl_thp_disable_except_madvise.always.fork
[usamaarif642@gmail.com: return after executing test in child process]
Link: https://lkml.kernel.org/r/3dca2de4-9a6a-4efe-a86c-83f9509831fc@gmail.com
Link: https://lkml.kernel.org/r/20250815135549.130506-8-usamaarif642@gmail.com
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yafang <laoar.shao@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In ksm_functional_tests, test_child_ksm() returned negative values to
indicate errors. However, when passed to exit(), these were interpreted
as large unsigned values (e.g, -2 became 254), leading to incorrect
handling in the parent process. As a result, some tests appeared to be
skipped or silently failed.
This patch changes test_child_ksm() to return positive error codes (1, 2,
3) and updates test_child_ksm_err() to interpret them correctly.
Additionally, test_prctl_fork_exec() now uses exit(4) after a failed
execv() to clearly signal exec failures. This ensures the parent
accurately detects and reports child process failures.
--------------
Before patch:
--------------
- [RUN] test_unmerge
ok 1 Pages were unmerged
...
- [RUN] test_prctl_fork
- No pages got merged
- [RUN] test_prctl_fork_exec
ok 7 PR_SET_MEMORY_MERGE value is inherited
...
Bail out! 1 out of 8 tests failed
- Planned tests != run tests (9 != 8)
- Totals: pass:7 fail:1 xfail:0 xpass:0 skip:0 error:0
--------------
After patch:
--------------
- [RUN] test_unmerge
ok 1 Pages were unmerged
...
- [RUN] test_prctl_fork
- No pages got merged
not ok 7 Merge in child failed
- [RUN] test_prctl_fork_exec
ok 8 PR_SET_MEMORY_MERGE value is inherited
...
Bail out! 2 out of 9 tests failed
- Totals: pass:7 fail:2 xfail:0 xpass:0 skip:0 error:0
Link: https://lkml.kernel.org/r/20250816040113.760010-6-aboorvad@linux.ibm.com
Fixes: 6c47de3be3 ("selftest/mm: ksm_functional_tests: extend test case for ksm fork/exec")
Co-developed-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch fixes 2 issues.
1) After fork() in test_prctl_fork, the child process uses the file
descriptors from the parent process to read ksm_stat and
ksm_merging_pages. This results in incorrect values being read (parent
process ksm_stat and ksm_merging_pages will be read in child), causing
the test to fail.
This patch calls init_global_file_handles() in the child process to
ensure that the current process's file descriptors are used to read
ksm_stat and ksm_merging_pages.
2) All tests currently call ksm_merge to trigger page merging. To
ensure the system remains in a consistent state for subsequent tests,
it is better to call ksm_unmerge during the test cleanup phase
In the test_prctl_fork test, after a fork(), reading
ksm_merging_pages in the child process returns a non-zero value because
a previous test performed a merge, and the child's memory state is
inherited from the parent.
Although the child process calls ksm_unmerge, the ksm_merging_pages
counter in the parent is reset to zero, while the child's counter
remains unchanged. This discrepancy causes the test to fail.
To avoid this issue, each test should call ksm_unmerge during
cleanup to ensure the counter is reset and the system is in a clean
state for subsequent tests.
execv argument is an array of pointers to null-terminated strings. In
this patch we also added NULL in the execv argument.
Link: https://lkml.kernel.org/r/20250816040113.760010-4-aboorvad@linux.ibm.com
Fixes: 6c47de3be3 ("selftest/mm: ksm_functional_tests: extend test case for ksm fork/exec")
Co-developed-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Enable these tests to be run on other pfnmap'ed memory like NVIDIA's EGM.
Add '--' as a separator to pass in file path. This allows passing of cmd
line arguments to kselftest_harness. Use '/dev/mem' as default filename.
Existing test passes:
pfnmap
TAP version 13
1..6
# Starting 6 tests from 1 test cases.
# PASSED: 6 / 6 tests passed.
# Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0
Pass params to kselftest_harness:
pfnmap -r pfnmap:mremap_fixed
TAP version 13
1..1
# Starting 1 tests from 1 test cases.
# RUN pfnmap.mremap_fixed ...
# OK pfnmap.mremap_fixed
ok 1 pfnmap.mremap_fixed
# PASSED: 1 / 1 tests passed.
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
Pass non-existent file name as input:
pfnmap -- /dev/blah
TAP version 13
1..6
# Starting 6 tests from 1 test cases.
# RUN pfnmap.madvise_disallowed ...
# SKIP Cannot open '/dev/blah'
Pass non pfnmap'ed file as input:
pfnmap -r pfnmap.madvise_disallowed -- randfile.txt
TAP version 13
1..1
# Starting 1 tests from 1 test cases.
# RUN pfnmap.madvise_disallowed ...
# SKIP Invalid file: 'randfile.txt'. Not pfnmap'ed
Link: https://lkml.kernel.org/r/20250805013629.47629-1-sudarsanm@google.com
Signed-off-by: Sudarsan Mahendran <sudarsanm@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add "extern" to the glibc-defined weak rseq symbols to convert the rseq
selftest's usage from weak symbol definitions to weak symbol _references_.
Effectively re-defining the glibc symbols wreaks havoc when building with
-fno-common, e.g. generates segfaults when running multi-threaded programs,
as dynamically linked applications end up with multiple versions of the
symbols.
Building with -fcommon, which until recently has the been the default for
GCC and clang, papers over the bug by allowing the linker to resolve the
weak/tentative definition to glibc's "real" definition.
Note, the symbol itself (or rather its address), not the value of the
symbol, is set to 0/NULL for unresolved weak symbol references, as the
symbol doesn't exist and thus can't have a value. Check for a NULL rseq
size pointer to handle the scenario where the test is statically linked
against a libc that doesn't support rseq in any capacity.
Fixes: 3bcbc20942 ("selftests/rseq: Play nice with binaries statically linked against glibc 2.35+")
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/87frdoybk4.ffs@tglx
Florian Westphal says:
====================
netfilter: updates for net-next
1) Don't respond to ICMP_UNREACH errors with another ICMP_UNREACH
error.
2) Support fetching the current bridge ethernet address.
This allows a more flexible approach to packet redirection
on bridges without need to use hardcoded addresses. From
Fernando Fernandez Mancera.
3) Zap a few no-longer needed conditionals from ipvs packet path
and convert to READ/WRITE_ONCE to avoid KCSAN warnings.
From Zhang Tengfei.
4) Remove a no-longer-used macro argument in ipset, from Zhen Ni.
* tag 'nf-next-25-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_reject: don't reply to icmp error messages
ipvs: Use READ_ONCE/WRITE_ONCE for ipvs->enable
netfilter: nft_meta_bridge: introduce NFT_META_BRI_IIFHWADDR support
netfilter: ipset: Remove unused htable_bits in macro ahash_region
selftest:net: fixed spelling mistakes
====================
Link: https://patch.msgid.link/20250911143819.14753-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Usually the autodefer helpers in lib.sh are expected to be run in context
where success is the expected outcome. However when using them for feature
detection, failure can legitimately occur. But the failed command still
schedules a cleanup, which will likely fail again.
Instead, only schedule deferred cleanup when the positive command succeeds.
This way of organizing the cleanup has the added benefit that now the
return code from these functions reflects whether the command passed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/af10a5bb82ea11ead978cf903550089e006d7e70.1757004393.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The fact that all cleanup (ideally) goes through the defer framework makes
debugging of these commands a bit tricky. However, this also gives us a
nice point to place a hook along the lines of PAUSE_ON_FAIL. When the
environment variable DEFER_PAUSE_ON_FAIL is set, and a cleanup command
results in non-zero exit status, show a bit of debuginfo and give the user
an opportunity to interrupt the execution altogether.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/2a07d24568ede6c42e4701657fa0b738e490fe59.1757004393.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.17-rc6).
Conflicts:
net/netfilter/nft_set_pipapo.c
net/netfilter/nft_set_pipapo_avx2.c
c4eaca2e10 ("netfilter: nft_set_pipapo: don't check genbit from packetpath lookups")
84c1da7b38 ("netfilter: nft_set_pipapo: use avx2 algorithm for insertions too")
Only trivial adjacent changes (in a doc and a Makefile).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add selftests for testing the reporting of arena page faults through BPF
streams. Two new bpf programs are added that read and write to an
unmapped arena address and the fault reporting is verified in the
userspace through streams.
The added bpf programs need to access the user_vm_start in struct
bpf_arena, this is done by casting &arena to struct bpf_arena *, but
barrier_var() is used on this ptr before accessing ptr->user_vm_start;
to stop GCC from issuing an out-of-bound access due to the cast from
smaller map struct to larger "struct bpf_arena"
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250911145808.58042-7-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extend the fastops test coverage to DIV and IDIV, specifically to provide
coverage for #DE (divide error) exceptions, as #DE is the only exception
that can occur in KVM's fastops path, i.e. that requires exception fixup.
Link: https://lore.kernel.org/r/20250909202835.333554-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend the fastops test to cover instructions that operate on 8-bit data.
Support for 8-bit instructions was omitted from the original commit purely
due to complications with BT not having a r/m8 variant. To keep the
RFLAGS.CF behavior deterministic and not heavily biased to '0' or '1',
continue using BT, but cast and load the to-be-tested value into a
dedicated 32-bit constraint.
Supporting 8-bit operations will allow using guest_test_fastops() as-is to
provide full coverage for DIV and IDIV. For divide operations, covering
all operand sizes _is_ interesting, because KVM needs provide exception
fixup for each size (failure to handle a #DE could panic the host).
Link: https://lore.kernel.org/all/aIF7ZhWZxlkcpm4y@google.com
Link: https://lore.kernel.org/r/20250909202835.333554-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add support for handling #DE (divide error) exceptions in KVM selftests
so that the fastops test can verify KVM correctly handles #DE when
emulating DIV or IDIV on behalf of the guest. Morph #DE to 0xff (i.e.
to -1) as a mostly-arbitrary vector to indicate #DE, so that '0' (the
real #DE vector) can still be used to indicate "no exception".
Link: https://lore.kernel.org/r/20250909202835.333554-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN, netfilter and wireless.
We have an IPv6 routing regression with the relevant fix still a WiP.
This includes a last-minute revert to avoid more problems.
Current release - new code bugs:
- wifi: nl80211: completely disable per-link stats for now
Previous releases - regressions:
- dev_ioctl: take ops lock in hwtstamp lower paths
- netfilter:
- fix spurious set lookup failures
- fix lockdep splat due to missing annotation
- genetlink: fix genl_bind() invoking bind() after -EPERM
- phy: transfer phy_config_inband() locking responsibility to phylink
- can: xilinx_can: fix use-after-free of transmitted SKB
- hsr: fix lock warnings
- eth:
- igb: fix NULL pointer dereference in ethtool loopback test
- i40e: fix Jumbo Frame support after iPXE boot
- macsec: sync features on RTM_NEWLINK
Previous releases - always broken:
- tunnels: reset the GSO metadata before reusing the skb
- mptcp: make sync_socket_options propagate SOCK_KEEPOPEN
- can: j1939: implement NETDEV_UNREGISTER notification hanidler
- wifi: ath12k: fix WMI TLV header misalignment"
* tag 'net-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
Revert "net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups"
hsr: hold rcu and dev lock for hsr_get_port_ndev
hsr: use hsr_for_each_port_rtnl in hsr_port_get_hsr
hsr: use rtnl lock when iterating over ports
wifi: nl80211: completely disable per-link stats for now
net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups
net: ethtool: fix wrong type used in struct kernel_ethtool_ts_info
MAINTAINERS: add Phil as netfilter reviewer
netfilter: nf_tables: restart set lookup on base_seq change
netfilter: nf_tables: make nft_set_do_lookup available unconditionally
netfilter: nf_tables: place base_seq in struct net
netfilter: nft_set_rbtree: continue traversal if element is inactive
netfilter: nft_set_pipapo: don't check genbit from packetpath lookups
netfilter: nft_set_bitmap: fix lockdep splat due to missing annotation
can: rcar_can: rcar_can_resume(): fix s2ram with PSCI
can: xilinx_can: xcan_write_frame(): fix use-after-free of transmitted SKB
can: j1939: j1939_local_ecu_get(): undo increment when j1939_local_ecu_get() fails
can: j1939: j1939_sk_bind(): call j1939_priv_put() immediately when j1939_local_ecu_get() failed
can: j1939: implement NETDEV_UNREGISTER notification handler
selftests: can: enable CONFIG_CAN_VCAN as a module
...
Pull bpf fixes from Alexei Starovoitov:
"A number of fixes accumulated due to summer vacations
- Fix out-of-bounds dynptr write in bpf_crypto_crypt() kfunc which
was misidentified as a security issue (Daniel Borkmann)
- Update the list of BPF selftests maintainers (Eduard Zingerman)
- Fix selftests warnings with icecc compiler (Ilya Leoshkevich)
- Disable XDP/cpumap direct return optimization (Jesper Dangaard
Brouer)
- Fix unexpected get_helper_proto() result in unusual configuration
BPF_SYSCALL=y and BPF_EVENTS=n (Jiri Olsa)
- Allow fallback to interpreter when JIT support is limited (KaFai
Wan)
- Fix rqspinlock and choose trylock fallback for NMI waiters. Pick
the simplest fix. More involved fix is targeted bpf-next (Kumar
Kartikeya Dwivedi)
- Fix cleanup when tcp_bpf_send_verdict() fails to allocate
psock->cork (Kuniyuki Iwashima)
- Disallow bpf_timer in PREEMPT_RT for now. Proper solution is being
discussed for bpf-next. (Leon Hwang)
- Fix XSK cq descriptor production (Maciej Fijalkowski)
- Tell memcg to use allow_spinning=false path in bpf_timer_init() to
avoid lockup in cgroup_file_notify() (Peilin Ye)
- Fix bpf_strnstr() to handle suffix match cases (Rong Tao)"
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Skip timer cases when bpf_timer is not supported
bpf: Reject bpf_timer for PREEMPT_RT
tcp_bpf: Call sk_msg_free() when tcp_bpf_send_verdict() fails to allocate psock->cork.
bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init()
bpf: Allow fall back to interpreter for programs with stack size <= 512
rqspinlock: Choose trylock fallback for NMI waiters
xsk: Fix immature cq descriptor production
bpf: Update the list of BPF selftests maintainers
selftests/bpf: Add tests for bpf_strnstr
selftests/bpf: Fix "expression result unused" warnings with icecc
bpf: Fix bpf_strnstr() to handle suffix match cases better
selftests/bpf: Extend crypto_sanity selftest with invalid dst buffer
bpf: Fix out-of-bounds dynptr write in bpf_crypto_crypt
bpf: Check the helper function is valid in get_helper_proto
bpf, cpumap: Disable page_pool direct xdp_return need larger scope
Create versions of the existing test cases where the routers generating
the ICMP error messages are using VRFs. Check that the source IPs of
these messages do not change in the presence of VRFs.
IPv6 always behaved correctly, but IPv4 fails when reverting "ipv4:
icmp: Fix source IP derivation in presence of VRFs".
Without IPv4 change:
# ./traceroute.sh
TEST: IPv6 traceroute [ OK ]
TEST: IPv6 traceroute with VRF [ OK ]
TEST: IPv4 traceroute [ OK ]
TEST: IPv4 traceroute with VRF [FAIL]
traceroute did not return 1.0.3.1
$ echo $?
1
The test fails because the ICMP error message is sent with the VRF
device's IP (1.0.4.1):
# traceroute -n -s 1.0.1.3 1.0.2.4
traceroute to 1.0.2.4 (1.0.2.4), 30 hops max, 60 byte packets
1 1.0.4.1 0.165 ms 0.110 ms 0.103 ms
2 1.0.2.4 0.098 ms 0.085 ms 0.078 ms
# traceroute -n -s 1.0.3.3 1.0.2.4
traceroute to 1.0.2.4 (1.0.2.4), 30 hops max, 60 byte packets
1 1.0.4.1 0.201 ms 0.138 ms 0.129 ms
2 1.0.2.4 0.123 ms 0.105 ms 0.098 ms
With IPv4 change:
# ./traceroute.sh
TEST: IPv6 traceroute [ OK ]
TEST: IPv6 traceroute with VRF [ OK ]
TEST: IPv4 traceroute [ OK ]
TEST: IPv4 traceroute with VRF [ OK ]
$ echo $?
0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-9-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When generating ICMP error messages, the kernel will prefer a source IP
that is on the same subnet as the destination IP (see
inet_select_addr()). Test this behavior by invoking traceroute with
different source IPs and checking that the ICMP error message is
generated with a source IP in the same subnet.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-8-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Both of the addresses are configured as primary addresses, but the
kernel is expected to choose 10.0.1.1/24 as the source IP of the ICMP
error message since it is on the same subnet as the destination IP of
the message (10.0.1.3/24). Reword the comment to reflect that.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-7-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use require_command() so that the test will return SKIP (4) when a
required command is not present.
Before:
# ./traceroute.sh
SKIP: Could not run IPV6 test without traceroute6
SKIP: Could not run IPV4 test without traceroute
$ echo $?
0
After:
# ./traceroute.sh
TEST: traceroute6 not installed [SKIP]
$ echo $?
4
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-6-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The test always returns success even if some tests were modified to
fail. Fix by converting the test to use the appropriate library
functions instead of using its own functions.
Before:
# ./traceroute.sh
TEST: IPV6 traceroute [FAIL]
TEST: IPV4 traceroute [ OK ]
Tests passed: 1
Tests failed: 1
$ echo $?
0
After:
# ./traceroute.sh
TEST: IPv6 traceroute [FAIL]
traceroute6 did not return 2000:102::2
TEST: IPv4 traceroute [ OK ]
$ echo $?
1
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-5-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are currently no kernel tests that verify setting and getting
options of the team driver.
In the future, options may be added that implicitly change other
options, which will make it useful to have tests like these that show
nothing breaks. There will be a follow up patch to this that adds new
"rx_enabled" and "tx_enabled" options, which will implicitly affect the
"enabled" option value and vice versa.
The tests use teamnl to first set options to specific values and then
gets them to compare to the set values.
Signed-off-by: Marc Harvey <marcharvey@google.com>
Link: https://patch.msgid.link/20250905040441.2679296-1-marcharvey@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
