This code has a copy and paste bug where it accidentally checks "if (err)"
instead of checking if "xsi_rsts" is NULL. Also, as a free bonus, I
changed the allocation from kzalloc() to kcalloc() which is a kernel
hardening measure to protect against integer overflows.
Fixes: 5863b4e065 ("net: airoha: Add airoha_eth_soc_data struct")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/aPtht6y5DRokn9zv@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The PTP initialization is two-step. First part are the function
vsc8584_ptp_probe_once() and vsc8584_ptp_probe() at probe time which
initialize the locks, queues, creates the PTP device. The second part is
the function vsc8584_ptp_init() at config_init() time which initialize
PTP in the HW.
For VSC8574 and VSC8572, the PTP initialization is incomplete. It is
missing the first part but it makes the second part. Meaning that the
ptp_clock_register() is never called.
There is no crash without the first part when enabling PTP but this is
unexpected because some PHys have PTP functionality exposed by the
driver and some don't even though they share the same PTP clock PTP.
Fixes: 774626fa44 ("net: phy: mscc: Add PTP support for 2 more VSC PHYs")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20251023191350.190940-3-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As the PHYs VSC8584, VSC8582, VSC8575 and VSC856X exists only as rev B,
we can use PHY_ID_MATCH_EXACT to match exactly on revision B of the PHY.
Because of this change then there is not need the check if it is a
different revision than rev B in the function vsc8584_probe() as we
already know that this will never happen.
These changes are a preparation for the next patch because in that patch
we will make the PHYs VSC8574 and VSC8572 to use vsc8584_probe() and
these PHYs have multiple revision.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20251023191350.190940-2-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In efx_mae_enumerate_mports(), memory allocated for mae_mport_desc is
passed as a argument to efx_mae_process_mport(), but when the error path
in efx_mae_process_mport() gets executed, the memory allocated for desc
gets leaked.
Fix that by freeing the memory allocation before returning error.
Fixes: a6a15aca42 ("sfc: enumerate mports in ef100")
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Link: https://patch.msgid.link/20251023141844.25847-1-nihaal@cse.iitm.ac.in
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If userspace provides a puncturing bitmap via the NL80211_ATTR_PUNCT_BITMAP
attribute, the kernel with mac80211_hwsim driver currently rejects the
command with the error: "driver doesn't support puncturing", because the
driver does not advertise support for this feature.
At present, the following hwsim test cases utilize puncturing, but the
bitmap is not sent to the kernel. Instead, the puncturing information is
conveyed only through the beacon data:
* eht_5ghz_80mhz_puncturing_override_1
* eht_5ghz_80mhz_puncturing_override_2
* eht_5ghz_80mhz_puncturing_override_3
A future change in hostapd will begin configuring the puncturing bitmap
explicitly, which will cause these test cases to fail unless the driver
advertises support.
To address this, update mac80211_hwsim driver to advertise puncturing
feature support.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20251017-hwsim_set_punct_feature_bit-v1-1-3be1bb3450c0@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
of_get_mac_address can return -EPROBE_DEFER when nvmem is not probed yet
for whatever reason. In this case, nvmem mac assignments will not work.
Based on the function path, this change only has effect for rt2800soc.c
and rt2800pci.c. The former tends to use nvmem for assignments.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20251014050833.46377-1-rosenp@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Before this patch during either switchdev or legacy mode enablement we
cleared the mac address of vports between changes. This change allows us
to preserve the vports mac address between eswitch mode changes.
Vports hold information for VFs/SFs such as the permanent mac address.
VF/SF mac can be set either by iproute vf interface or devlink function
interface. For no obvious reason we reset it to 0 on switchdev/legacy
mode changes, this patch is fixing that, to align with other vport
information that are never reset, e.g GUID,mtu,promisc mode, etc ..
Signed-off-by: Adithya Jayachandran <ajayachandra@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Acked-by: Leon Romanovsky <leon@kernel.org> # RDMA
Avoid wasting coherent DMA memory by allocating the descriptor base
address table sized for the actual number of DBAT/CDARq entries supported
by the SoC. Some platforms (for example GBETH) only provide two CDARq
entries; previously the driver always allocated space for 22 entries which
needlessly consumed memory on those systems.
Pass the per-SoC dbat_entry_num via struct ravb_hw_info and use it for
allocation and initialization in probe. This sizes the table correctly and
removes the unnecessary memory overhead on SoCs with fewer DBAT entries.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20251023112111.215198-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert stmmac to use phylink-managed Wake-on-Lan support. To achieve
this, we implement the .mac_wol_set() method, which simply configures
the driver model's struct device wakeup for stmmac, and sets the
priv->wolopts appropriately.
When STMMAC_FLAG_USE_PHY_WOL is set, in the stmmac world this means to
only use the PHY's WoL support and ignore the MAC's WoL capabilities.
To preserve this behaviour, we enable phylink's legacy mode, and avoid
telling phylink that the MAC has any WoL support. This achieves the
same functionality for this case.
When STMMAC_FLAG_USE_PHY_WOL is not set, we provide the MAC's WoL
capabilities to phylink, which then allows phylink to choose between
the PHY and MAC for WoL depending on their individual capabilities
as described in the phylink commit. This only augments the WoL
functionality with PHYs that declare to the driver model that they are
wake-up capable. Currently, very few PHY drivers support this.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vBrRC-0000000BLzg-2tA4@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some drivers, e.g. stmmac, use the speed_up()/speed_down() APIs to
gain additional power saving during Wake-on-LAN where the PHY is
managing the state.
Add support to phylink for this, which can be enabled by the MAC
driver. Only change the PHY speed if the PHY is configured for
wake-up, but without any wake-up on the MAC side, as MAC side
means changing the configuration once the negotiation has
completed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vBrR7-0000000BLza-2PjK@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add core phylink managed Wake-on-Lan support, which is enabled when the
MAC driver fills in the new .mac_wol_set() method that this commit
creates.
When this feature is disabled, phylink acts as it has in the past,
merely passing the ethtool WoL calls to phylib whenever a PHY exists.
No other new functionality provided by this commit is enabled.
When this feature is enabled, a more inteligent approach is used.
Phylink will first pass WoL options to the PHY, read them back, and
attempt to set any options that were not set at the PHY at the MAC.
Since we have PHY drivers that report they support WoL, and accept WoL
configuration even though they aren't wired up to be capable of waking
the system, we need a way to differentiate between PHYs that think
they support WoL and those which actually do. As PHY drivers do not
make use of the driver model's wake-up infrastructure, but could, we
use this to determine whether PHY drivers can participate. This gives
a path forward where, as MAC drivers are converted to this, it
encourages PHY drivers to also be converted.
Phylink will also ignore the mac_wol argument to phylink_suspend() as
it now knows the WoL state at the MAC.
MAC drivers are expected to record/configure the Wake-on-Lan state in
their .mac_set_wol() method, and deal appropriately with it in their
suspend/resume methods. The driver model provides assistance to set the
IRQ wake support which may assist driver authors in achieving the
necessary configuration.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vBrR2-0000000BLzU-1xYL@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add phy_may_wakeup() which uses the driver model's device_may_wakeup()
when the PHY driver has marked the device as wakeup capable in the
driver model, otherwise use phy_drv_wol_enabled().
Replace the sites that used to call phy_drv_wol_enabled() with this
as checking the driver model will be more efficient than checking the
WoL state.
Export phy_may_wakeup() so that phylink can use it.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vBrQx-0000000BLzO-1RLt@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ice_deinit_dev() takes care of turning off adminq processing, which is
much needed during driver teardown (remove, reset, error path). Move it
to the very end where applicable.
For example, ice_deinit_hw() called after adminq deinit slows rmmod on
my two-card setup by about 60 seconds.
ice_init_dev() and ice_deinit_dev() scopes were reduced by previous
commits of the series, with a final touch of extracting ice_init_dev_hw()
out now (there is no deinit counterpart).
Note that removed ice_service_task_stop() call from ice_remove() is placed
in the ice_deinit_dev() (and stopping twice makes no sense).
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Move udp_tunnel_nic setup and ice_req_irq_msix_misc() call into
ice_init_pf(), remove some redundancy in the former while moving.
Move ice_free_irq_msix_misc() call into ice_deinit_pf(), to mimic
the above in terms of needed cleanup. Guard it via emptiness check,
to keep the allowance of half-initialized pf being cleaned up.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Move ice_init_interrupt_scheme() prior ice_init_pf().
To enable the move ice_set_pf_caps() was moved out from ice_init_pf()
to the caller (ice_init_dev()), and placed prior to the irq scheme init.
The move makes deinit order of ice_deinit_dev() and failure-path of
ice_init_pf() match (at least in terms of not calling
ice_clear_interrupt_scheme() and ice_deinit_pf() in opposite ways).
The new order aligns with findings made by Jakub Buchocki in
the commit 24b454bc35 ("ice: Fix ice module unload").
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Move service task start out of ice_init_pf(). Do analogous with deinit.
Service task is needed up to the very end of driver removal, later commit
of the series will move it later on execution timeline.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Instead of making assumptions in comments move them into code.
Be also more precise, RTNL must be locked only when there is
NAPI, and we have VSIs w/o NAPI that call ice_vsi_clear_napi_queues()
during rmmod.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Hardware target implements an address space larger than that PCI BAR can
map. In order to be able to access the whole target address space, the
BAR space is split into 4 segments, of which the last 3, called windows,
can be dynamically mapped to the desired area. This is achieved by
updating WINDOW_REG_ADDRESS register with appropriate window value.
Currently each time when accessing a register that beyond WINDOW_START,
host calculates the window value and caches it after window update,
this way next time when accessing a register falling in the same window,
host knows that the window is already good hence no additional update
needed.
However this mechanism breaks after global reset is triggered in
ath12k_pci_soc_global_reset(), because with global reset hardware resets
WINDOW_REG_ADDRESS register hence the window is not properly mapped any
more. Current host does nothing about this, as a result a subsequent
register access may not work as expected if it falls in a window same as
before.
Although there is no obvious issue seen now, better to fix it to avoid
future problem. The fix is done by restoring the window register after
global reset.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251017-ath12k-reset-window-cache-v1-1-29e0e751deed@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Add support for handling BSS color collision events reported by firmware.
There are two scenarios where a BSS color collision may be detected:
1. The AP's MAC detects the collision directly, and firmware reports a
BSS color collision event to the host.
2. A STA associated with the AP detects the collision. The notification
frame from the peer is routed directly to the AP firmware, which handles
it and sends the BSS color collision event to the host.
Add logic to parse and handle such events, and pass the data
up to mac80211.
Unlike CSA, firmware does not provide an offload mechanism for BSS color
change. Instead, the color change process is triggered via beacon offload
TX completion events sent by firmware.
BSS color feature is enabled depending on service flag advertised by
firmware, based on which color change functionality is invoked.
This change builds upon the following ath11k patch.
commit 886433a984 ("ath11k: add support for BSS color change")
Tested-on: WCN7850 hw2.0 PCI WLAN.IOE_HMT.1.1-00011-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Signed-off-by: Wei Zhang <wei.zhang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251017060100.1751692-1-wei.zhang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
In virtio-net, we have not yet supported multi-buffer XDP packet in
zerocopy mode when there is a binding XDP program. However, in that
case, when receiving multi-buffer XDP packet, we skip the XDP program
and return XDP_PASS. As a result, the packet is passed to normal network
stack which is an incorrect behavior (e.g. a XDP program for packet
count is installed, multi-buffer XDP packet arrives and does go through
XDP program. As a result, the packet count does not increase but the
packet is still received from network stack).This commit instead returns
XDP_ABORTED in that case.
Fixes: 99c861b44e ("virtio_net: xsk: rx: support recv merge mode")
Cc: stable@vger.kernel.org
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20251022155630.49272-1-minhquangbui99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The root cause of this issue are:
1. When probing the usbnet device, executing usbnet_link_change(dev, 0, 0);
put the kevent work in global workqueue. However, the kevent has not yet
been scheduled when the usbnet device is unregistered. Therefore, executing
free_netdev() results in the "free active object (kevent)" error reported
here.
2. Another factor is that when calling usbnet_disconnect()->unregister_netdev(),
if the usbnet device is up, ndo_stop() is executed to cancel the kevent.
However, because the device is not up, ndo_stop() is not executed.
The solution to this problem is to cancel the kevent before executing
free_netdev().
Fixes: a69e617e53 ("usbnet: Fix linkwatch use-after-free on disconnect")
Reported-by: Sam Sun <samsun1006219@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=8bfd7bcc98f7300afb84
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Link: https://patch.msgid.link/20251022024007.1831898-1-lizhi.xu@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg says:
====================
First set of fixes:
- brcmfmac: long-standing crash when used w/o P2P
- iwlwifi: fix for a use-after-free bug
- mac80211: key tailroom accounting bug could leave
allocation overhead and cause a warning
- ath11k: add a missing platform,
fix key flag operations
- bcma: skip devices disabled in OF/DT
- various (potential) memory leaks
* tag 'wireless-2025-10-23' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: nl80211: call kfree without a NULL check
wifi: mac80211: fix key tailroom accounting leak
wifi: brcmfmac: fix crash while sending Action Frames in standalone AP Mode
MAINTAINERS: wcn36xx: Add linux-wireless list
bcma: don't register devices disabled in OF
wifi: mac80211: reset FILS discovery and unsol probe resp intervals
wifi: iwlwifi: fix potential use after free in iwl_mld_remove_link()
wifi: ath11k: avoid bit operation on key flags
wifi: ath12k: free skb during idr cleanup callback
wifi: ath11k: Add missing platform IDs for quirk table
wifi: ath10k: Fix memory leak on unsupported WMI command
====================
Link: https://patch.msgid.link/20251023180604.626946-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
