Pull ARM updates from Russell King:
- fix a race condition handling PG_dcache_clean
- further cleanups for the fault handling, allowing RT to be enabled
- fixing nzones validation in adfs filesystem driver
- fix for module unwinding
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9463/1: Allow to enable RT
ARM: 9472/1: fix race condition on PG_dcache_clean in __sync_icache_dcache()
ARM: 9471/1: module: fix unwind section relocation out of range error
fs/adfs: validate nzones in adfs_validate_bblk()
ARM: provide individual is_translation_fault() and is_permission_fault()
ARM: move FSR fault status definitions before fsr_fs()
ARM: use BIT() and GENMASK() for fault status register fields
ARM: move is_permission_fault() and is_translation_fault() to fault.h
ARM: move vmalloc() lazy-page table population
ARM: ensure interrupts are enabled in __do_user_fault()
Pull x86 fixes from Ingo Molnar:
- Prevent deadlock during shstk sigreturn (Rick Edgecombe)
- Disable FRED when PTI is forced on (Dave Hansen)
- Revert a CPA INVLPGB optimization that did not properly handle
discontiguous virtual addresses (Dave Hansen)
* tag 'x86-urgent-2026-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Revert INVLPGB optimization for set_memory code
x86/cpu: Disable FRED when PTI is forced on
x86/shstk: Prevent deadlock during shstk sigreturn
Pull RISC-V updates from Paul Walmsley:
"There is one significant change outside arch/riscv in this pull
request: the addition of a set of KUnit tests for strlen(), strnlen(),
and strrchr().
Otherwise, the most notable changes are to add some RISC-V-specific
string function implementations, to remove XIP kernel support, to add
hardware error exception handling, and to optimize our runtime
unaligned access speed testing.
A few comments on the motivation for removing XIP support. It's been
broken in the RISC-V kernel for months. The code is not easy to
maintain. Furthermore, for XIP support to truly be useful for RISC-V,
we think that compile-time feature switches would need to be added for
many of the RISC-V ISA features and microarchitectural properties that
are currently implemented with runtime patching. No one has stepped
forward to take responsibility for that work, so many of us think it's
best to remove it until clear use cases and champions emerge.
Summary:
- Add Kunit correctness testing and microbenchmarks for strlen(),
strnlen(), and strrchr()
- Add RISC-V-specific strnlen(), strchr(), strrchr() implementations
- Add hardware error exception handling
- Clean up and optimize our unaligned access probe code
- Enable HAVE_IOREMAP_PROT to be able to use generic_access_phys()
- Remove XIP kernel support
- Warn when addresses outside the vmemmap range are passed to
vmemmap_populate()
- Update the ACPI FADT revision check to warn if it's not at least
ACPI v6.6, which is when key RISC-V-specific tables were added to
the specification
- Increase COMMAND_LINE_SIZE to 2048 to match ARM64, x86, PowerPC,
etc.
- Make kaslr_offset() a static inline function, since there's no need
for it to show up in the symbol table
- Add KASLR offset and SATP to the VMCOREINFO ELF notes to improve
kdump support
- Add Makefile cleanup rule for vdso_cfi copied source files, and add
a .gitignore for the build artifacts in that directory
- Remove some redundant ifdefs that check Kconfig macros
- Add missing SPDX license tag to the CFI selftest
- Simplify UTS_MACHINE assignment in the RISC-V Makefile
- Clarify some unclear comments and remove some superfluous comments
- Fix various English typos across the RISC-V codebase"
* tag 'riscv-for-linus-7.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (31 commits)
riscv: Remove support for XIP kernel
riscv: Reuse compare_unaligned_access() in check_vector_unaligned_access()
riscv: Split out compare_unaligned_access()
riscv: Reuse measure_cycles() in check_vector_unaligned_access()
riscv: Split out measure_cycles() for reuse
riscv: Clean up & optimize unaligned scalar access probe
riscv: lib: add strrchr() implementation
riscv: lib: add strchr() implementation
riscv: lib: add strnlen() implementation
lib/string_kunit: extend benchmarks to strnlen() and chr searches
lib/string_kunit: add performance benchmark for strlen()
lib/string_kunit: add correctness test for strrchr()
lib/string_kunit: add correctness test for strnlen()
lib/string_kunit: add correctness test for strlen()
riscv: vdso_cfi: Add .gitignore for build artifacts
riscv: vdso_cfi: Add clean rule for copied sources
riscv: enable HAVE_IOREMAP_PROT
riscv: mm: WARN_ON() for bad addresses in vmemmap_populate()
riscv: acpi: update FADT revision check to 6.6
riscv: add hardware error trap handler support
...
Pull LoongArch updates from Huacai Chen:
- Adjust build infrastructure for 32BIT/64BIT
- Add HIGHMEM (PKMAP and FIX_KMAP) support
- Show and handle CPU vulnerabilites correctly
- Batch the icache maintenance for jump_label
- Add more atomic instructions support for BPF JIT
- Add more features (e.g. fsession) support for BPF trampoline
- Some bug fixes and other small changes
* tag 'loongarch-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (21 commits)
selftests/bpf: Enable CAN_USE_LOAD_ACQ_STORE_REL for LoongArch
LoongArch: BPF: Add fsession support for trampolines
LoongArch: BPF: Introduce emit_store_stack_imm64() helper
LoongArch: BPF: Support up to 12 function arguments for trampoline
LoongArch: BPF: Support small struct arguments for trampoline
LoongArch: BPF: Open code and remove invoke_bpf_mod_ret()
LoongArch: BPF: Support load-acquire and store-release instructions
LoongArch: BPF: Support 8 and 16 bit read-modify-write instructions
LoongArch: BPF: Add the default case in emit_atomic() and rename it
LoongArch: Define instruction formats for AM{SWAP/ADD}.{B/H} and DBAR
LoongArch: Batch the icache maintenance for jump_label
LoongArch: Add flush_icache_all()/local_flush_icache_all()
LoongArch: Add spectre boundry for syscall dispatch table
LoongArch: Show CPU vulnerabilites correctly
LoongArch: Make arch_irq_work_has_interrupt() true only if IPI HW exist
LoongArch: Use get_random_canary() for stack canary init
LoongArch: Improve the logging of disabling KASLR
LoongArch: Align FPU register state to 32 bytes
LoongArch: Handle CONFIG_32BIT in syscall_get_arch()
LoongArch: Add HIGHMEM (PKMAP and FIX_KMAP) support
...
Pull networking deletions from Jakub Kicinski:
"Delete some obsolete networking code
Old code like amateur radio and NFC have long been a burden to core
networking developers. syzbot loves to find bugs in BKL-era code, and
noobs try to fix them.
If we want to have a fighting chance of surviving the LLM-pocalypse
this code needs to find a dedicated owner or get deleted. We've talked
about these deletions multiple times in the past and every time
someone wanted the code to stay. It is never very clear to me how many
of those people actually use the code vs are just nostalgic to see it
go. Amateur radio did have occasional users (or so I think) but most
users switched to user space implementations since its all super slow
stuff. Nobody stepped up to maintain the kernel code.
We were lucky enough to find someone who wants to help with NFC so
we're giving that a chance. Let's try to put the rest of this code
behind us"
* tag 'net-deletions' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next:
drivers: net: 8390: wd80x3: Remove this driver
drivers: net: 8390: ultra: Remove this driver
drivers: net: 8390: AX88190: Remove this driver
drivers: net: fujitsu: fmvj18x: Remove this driver
drivers: net: smsc: smc91c92: Remove this driver
drivers: net: smsc: smc9194: Remove this driver
drivers: net: amd: nmclan: Remove this driver
drivers: net: amd: lance: Remove this driver
drivers: net: 3com: 3c589: Remove this driver
drivers: net: 3com: 3c574: Remove this driver
drivers: net: 3com: 3c515: Remove this driver
drivers: net: 3com: 3c509: Remove this driver
net: packetengines: remove obsolete yellowfin driver and vendor dir
net: packetengines: remove obsolete hamachi driver
net: remove unused ATM protocols and legacy ATM device drivers
net: remove ax25 and amateur radio (hamradio) subsystem
net: remove ISDN subsystem and Bluetooth CMTP
caif: remove CAIF NETWORK LAYER
This bug was already discovered and fixed for arm64 in
commit 588a513d34 ("arm64: Fix race condition on PG_dcache_clean in
__sync_icache_dcache()").
Verified with added instrumentation to track dcache flushes in a ring
buffer, as shown by the (distilled) output:
kernel: SIGILL at b6b80ac0 cpu 1 pid 32663 linux_pte=8eff659f
hw_pte=8eff6e7e young=1 exec=1
kernel: dcache flush START cpu0 pfn=8eff6 ts=48629557020154
kernel: dcache flush SKIPPED cpu1 pfn=8eff6 ts=48629557020154
kernel: dcache flush FINISH cpu0 pfn=8eff6 ts=48629557036154
audisp-syslog: comm="journalctl" exe="/usr/bin/journalctl" sig=4 [...]
Discussions in the mailing list mentioned that arch/arm is also affected
but the fix was never applied to it [1][2]. Apply the change now, since
the race condition can cause sporadic SIGILL's and SEGV's especially
while under high memory pressure.
Link: https://lore.kernel.org/all/adzMOdySgMIePcue@willie-the-truck [1]
Link: https://lore.kernel.org/all/20210514095001.13236-1-catalin.marinas@arm.com [2]
Signed-off-by: Brian Ruley <brian.ruley@gehealthcare.com>
Reviewed-by: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Fixes: 6012191aa9 ("ARM: 6380/1: Introduce __sync_icache_dcache() for VIPT caches")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
tl;dr: Revert an INVLPGB optimization that did not properly handle
discontiguous virtual addresses.
Full story:
I got a report from some graphics (i915) folks that bisected a
regression in their test suite to 86e6815b31 ("x86/mm: Change
cpa_flush() to call flush_kernel_range() directly"). There was a bit
of flip-flopping on the exact bisect, but the code here does seem
wrong to me. The i915 folks were calling set_pages_array_wc(), so
using the CPA_PAGES_ARRAY mode.
Basically, the 'struct cpa_data' can wrap up all kinds of page table
changes. Some of these are virtually contiguous, but some are very
much not which is one reason why there are ->vaddr and ->pages arrays.
86e6815b31 made the mistake of assuming that the virtual addresses
in the cpa_data are always contiguous. It got things right when neither
CPA_ARRAY/CPA_PAGES_ARRAY is used, but theoretically wrong when either
of those is used.
In the i915 case, it probably failed to flush some WB TLB entries and
install WC ones, leaving some data in the caches and not flushing it
out to where the device could see it. That eventually caused graphics
problems.
Revert the INVLPGB optimization. It can be reintroduced later, but it
will need to be a bit careful about the array modes.
Fixes: 86e6815b31 ("x86/mm: Change cpa_flush() to call flush_kernel_range()")
Reported-by: Cui, Ling <ling.cui@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20260421151909.6B3281C6@davehans-spike.ostc.intel.com
Pull Xtensa updates from Max Filippov:
- use register_sys_off_handler(SYS_OFF_MODE_RESTART) instead of
the deprecated register_restart_handler()
- drop custom ucontext.h and reuse asm-generic ucontext.h
* tag 'xtensa-20260422' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: uapi: Reuse asm-generic ucontext.h
xtensa: xtfpga: Use register_sys_off_handler(SYS_OFF_MODE_RESTART)
xtensa: xt2000: Use register_sys_off_handler(SYS_OFF_MODE_RESTART)
xtensa: ISS: Use register_sys_off_handler(SYS_OFF_MODE_RESTART)
Similar to the hamachi driver, the yellowfin driver supports hardware
that is over two decades old and no longer in active use.
Since yellowfin was the last remaining driver in the packetengines
vendor directory, we can now safely remove the entire directory and
drop its associated references from the parent Kconfig and Makefile.
This eliminates dead code and reduces the overall maintenance burden
on the netdev subsystem.
Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260422044820.485660-3-25181214217@stu.xidian.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull PCMCIA updates from Dominik Brodowski:
"A number of minor PCMCIA bugfixes and cleanups, and a patch removing
obsolete host controller drivers"
* tag 'pcmcia-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: remove obsolete host controller drivers
pcmcia: Convert to use less arguments in pci_bus_for_each_resource()
PCMCIA: Fix garbled log messages for KERN_CONT
Remove the amateur radio (AX.25, NET/ROM, ROSE) protocol implementation
and all associated hamradio device drivers from the kernel tree.
This set of protocols has long been a huge bug/syzbot magnet,
and since nobody stepped up to help us deal with the influx
of the AI-generated bug reports we need to move it out of tree
to protect our sanity.
The code is moved to an out-of-tree repo:
https://github.com/linux-netdev/mod-orphan
if it's cleaned up and reworked there we can accept it back.
Minimal stub headers are kept for include/net/ax25.h (AX25_P_IP,
AX25_ADDR_LEN, ax25_address) and include/net/rose.h (ROSE_ADDR_LEN)
so that the conditional integration code in arp.c and tun.c continues
to compile and work when the out-of-tree modules are loaded.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Carlos Bilbao <carlos.bilbao@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260421021824.1293976-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove CAIF (Communication CPU to Application CPU Interface), the
ST-Ericsson modem protocol. The subsystem has been orphaned since 2013.
The last meaningful changes from the maintainers were in March 2013:
a8c7687bf2 ("caif_virtio: Check that vringh_config is not null")
b2273be8d2 ("caif_virtio: Use vringh_notify_enable correctly")
0d2e1a2926 ("caif_virtio: Introduce caif over virtio")
Not-so-coincidentally, according to "the Internet" ST-Ericsson officially
shut down its modem joint venture in Aug 2013.
If anyone is using this code please yell!
In the 13 years since, the code has accumulated 200 non-merge commits,
of which 71 were cross-tree API changes, 21 carried Fixes: tags, and
the remaining ~110 were cleanups, doc conversions, treewide refactors,
and one partial removal (caif_hsi, ca75bcf0a8).
We are still getting fixes to this code, in the last 10 days there were
3 reports on security@ about CAIF that I have been CCed on.
UAPI constants (AF_CAIF, ARPHRD_CAIF, N_CAIF, VIRTIO_ID_CAIF) and the
SELinux classmap entry are intentionally kept for ABI stability.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260416182829.1440262-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull more SoC updates from Arnd Bergmann:
"These are the contents that arrived during the easter vacation and
didn't make it into the last 7.0 bugfixes or the first set of branches
for the merge window. Aside from a reset controller bugfix and an
update to the MAINTAINERS entry, this is all devicetree changes.
The Marvell devicetree updates contain the usual minor updates and
bugfixes, along with a two larger but trivial patches to drop unused
dtsi files, the single broadcom fix addresses a build time warning
introduced during the merge window.
The freescale, amlogic, and apple changes missed the last fixes branch
for 7.0"
* tag 'soc-late-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
arm64: dts: meson-gxl-p230: fix ethernet PHY interrupt number
arm64: dts: amlogic: meson-axg: Add missing cache information to cpu0
arm64: dts: amlogic: t7: khadas-vim4: fix board model name
arm64: dts: amlogic: Fix GIC register ranges for Amlogic T7
arm64: dts: amlogic: t7: khadas-vim4: fix memory layout for 8GB RAM
arm64: dts: amlogic: s6: Drop CPU masks from GICv3 PPI interrupts
Documentation/process: maintainer-soc: Document purpose of defconfigs
Documentation/process: maintainer-soc: Trim from trivial ask-DT
ARM: dts: bcm4709: fix bus range assignment
arm64: dts: apple: Fix spelling error
dt-bindings: Update Sasha Finkelstein's email address
mailmap: Update Sasha Finkelstein's email address
arm64: dts: marvell: armada-37xx: swap PHYs' order in USB3 controller node
arm64: dts: marvell: armada-37xx: use 'usb2-phy' in USB3 controller's phy-names
arm64: dts: imx8mm-tqma8mqml: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mn-tqma8mqnl: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mm-emtop-som: Correct PAD settings for PMIC_nINT
reset: amlogic: t7: Fix null reset ops
arm64: dts: imx8mp-data-modul-edm-sbc: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-dhcom-som: Correct PAD settings for PMIC_nINT
...
Amlogic DT Fixes for v7.1:
- Fix ethernet PHY interrupt number for P230 reference board
- Add missing cache information to cpu0 for Amlogic AXG
- Fix Khadas VIM4 board model name
- Fix GIC register ranges for Amlogic T7
- Fix Khadas VIM4 memory layout for 8GB RAM
- Drop CPU masks from GICv3 PPI interrupts for Amlogic S6
* tag 'amlogic-fixes-v7.1-rc' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: meson-gxl-p230: fix ethernet PHY interrupt number
arm64: dts: amlogic: meson-axg: Add missing cache information to cpu0
arm64: dts: amlogic: t7: khadas-vim4: fix board model name
arm64: dts: amlogic: Fix GIC register ranges for Amlogic T7
arm64: dts: amlogic: t7: khadas-vim4: fix memory layout for 8GB RAM
arm64: dts: amlogic: s6: Drop CPU masks from GICv3 PPI interrupts
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Implement BPF_TRACE_FSESSION support in LoongArch BPF JIT. The logic
here is almost identical to what has been done in RISC-V JIT.
The key changes are:
- Allocate stack space for function meta and session cookies
- Introduce invoke_bpf() as a wrapper around invoke_bpf_prog() that
populates session cookies before each invocation
- Implement bpf_jit_supports_fsession() callback
Tested-by: Vincent Li <vincent.mc.li@gmail.com>
Reviewed-by: Menglong Dong <menglong8.dong@gmail.com>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Introduce a helper to store 64-bit immediate on the trampoline stack.
The helper will be used in the next patch. Also refactor the existing
code to use this helper.
Tested-by: Vincent Li <vincent.mc.li@gmail.com>
Reviewed-by: Menglong Dong <menglong8.dong@gmail.com>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Pull kgdb update from Daniel Thompson:
"Only a very small update for kgdb this cycle: a single patch from
Kexin Sun that fixes some outdated comments"
* tag 'kgdb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kgdb: update outdated references to kgdb_wait()
Pull s390 updates from Vasily Gorbik:
- Add support for CONFIG_PAGE_TABLE_CHECK and enable it in
debug_defconfig. s390 can only tell user from kernel PTEs via the mm,
so mm_struct is now passed into pxx_user_accessible_page() callbacks
- Expose the PCI function UID as an arch-specific slot attribute in
sysfs so a function can be identified by its user-defined id while
still in standby. Introduces a generic ARCH_PCI_SLOT_GROUPS hook in
drivers/pci/slot.c
- Refresh s390 PCI documentation to reflect current behavior and cover
previously undocumented sysfs attributes
- zcrypt device driver cleanup series: consistent field types, clearer
variable naming, a kernel-doc warning fix, and a comment explaining
the intentional synchronize_rcu() in pkey_handler_register()
- Provide an s390 arch_raw_cpu_ptr() that avoids the detour via
get_lowcore() using alternatives, shrinking defconfig by ~27 kB
- Guard identity-base randomization with kaslr_enabled() so nokaslr
keeps the identity mapping at 0 even with RANDOMIZE_IDENTITY_BASE=y
- Build S390_MODULES_SANITY_TEST as a module only by requiring KUNIT &&
m, since built-in would not exercise module loading
- Remove the permanently commented-out HMCDRV_DEV_CLASS create_class()
code in the hmcdrv driver
- Drop stale ident_map_size extern conflicting with asm/page.h
* tag 's390-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: Fix warning about wrong kernel doc comment
PCI: s390: Expose the UID as an arch specific PCI slot attribute
docs: s390/pci: Improve and update PCI documentation
s390/pkey: Add comment about synchronize_rcu() to pkey base
s390/hmcdrv: Remove commented out code
s390/zcrypt: Slight rework on the agent_id field
s390/zcrypt: Explicitly use a card variable in _zcrypt_send_cprb
s390/zcrypt: Rework MKVP fields and handling
s390/zcrypt: Make apfs a real unsigned int field
s390/zcrypt: Rework domain processing within zcrypt device driver
s390/zcrypt: Move inline function rng_type6cprb_msgx from header to code
s390/percpu: Provide arch_raw_cpu_ptr()
s390: Enable page table check for debug_defconfig
s390/pgtable: Add s390 support for page table check
s390/pgtable: Use set_pmd_bit() to invalidate PMD entry
mm/page_table_check: Pass mm_struct to pxx_user_accessible_page()
s390/boot: Respect kaslr_enabled() for identity randomization
s390/Kconfig: Make modules sanity test a module-only option
s390/setup: Drop stale ident_map_size declaration
Pull Hyper-V updates from Wei Liu:
- Fix cross-compilation for hv tools (Aditya Garg)
- Fix vmemmap_shift exceeding MAX_FOLIO_ORDER in mshv_vtl (Naman Jain)
- Limit channel interrupt scan to relid high water mark (Michael
Kelley)
- Export hv_vmbus_exists() and use it in pci-hyperv (Dexuan Cui)
- Fix cleanup and shutdown issues for MSHV (Jork Loeser)
- Introduce more tracing support for MSHV (Stanislav Kinsburskii)
* tag 'hyperv-next-signed-20260421' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Skip LP/VP creation on kexec
x86/hyperv: move stimer cleanup to hv_machine_shutdown()
Drivers: hv: vmbus: fix hyperv_cpuhp_online variable shadowing
mshv: Add tracepoint for GPA intercept handling
mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER
tools: hv: Fix cross-compilation
Drivers: hv: vmbus: Export hv_vmbus_exists() and use it in pci-hyperv
mshv: Introduce tracing support
Drivers: hv: vmbus: Limit channel interrupt scan to relid high water mark
Currently, LoongArch bpf trampoline supports up to 8 function arguments.
According to the statistics from commit 473e3150e3 ("bpf, x86: allow
function arguments up to 12 for TRACING"), there are over 200 functions
accept 9 to 12 arguments, so add 12 arguments support for trampoline.
With this patch, the following related testcases passed:
sudo ./test_progs -a tracing_struct/struct_many_args
sudo ./test_progs -a fentry_test/fentry_many_args
sudo ./test_progs -a fexit_test/fexit_many_args
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Tested-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In the current BPF code, the struct argument size is at most 16 bytes,
enforced by the verifier. According to the Procedure Call Standard for
LoongArch, the struct argument size below 16 bytes are provided as part
of the 8 argument registers, that is to say, the struct argument may be
passed in a pair of registers if its size is more than 8 bytes and no
more than 16 bytes.
Extend the BPF trampoline JIT to support attachment to functions that
take small structures (up to 16 bytes) as argument, save and restore a
number of "argument registers" rather than a number of arguments.
With this patch, the following related testcases passed:
sudo ./test_progs -a tracing_struct/struct_args
sudo ./test_progs -a tracing_struct/union_args
Link: https://github.com/loongson/la-abi-specs/blob/release/lapcs.adoc#structures
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Tested-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
invoke_bpf_mod_ret() is a small wrapper over invoke_bpf_prog(), it
should check the return value of invoke_bpf_prog() and then return
immediately if invoke_bpf_prog() failed, just open code and remove
it due to it is called only once.
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Tested-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Use the LoongArch common memory access instructions with the barrier
'dbar' to support the BPF load-acquire and store-release instructions.
With this patch, the following testcases passed on LoongArch if the
macro CAN_USE_LOAD_ACQ_STORE_REL is usable in bpf selftests:
sudo ./test_progs -t verifier_load_acquire
sudo ./test_progs -t verifier_store_release
sudo ./test_progs -t verifier_precision/bpf_load_acquire
sudo ./test_progs -t verifier_precision/bpf_store_release
sudo ./test_progs -t compute_live_registers/atomic_load_acq_store_rel
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The 8 and 16 bit read-modify-write instructions {amadd/amswap}.{b/h}
were newly added in the latest LoongArch Reference Manual, use them to
avoid the error of unknown opcode if possible.
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Like the other archs such as x86 and riscv, add the default case
in emit_atomic() to print an error message for the invalid opcode
and return -EINVAL, then make its return type as int.
While at it, given that all of the instructions in emit_atomic()
are only read-modify-write instructions, rename emit_atomic() to
emit_atomic_rmw() to make it clear, because there will be a new
function emit_atomic_ld_st() for load-acquire and store-release
instructions in the later patch.
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The 8 and 16 bit read-modify-write atomic instructions amadd.{b/h} and
amswap.{b/h} were newly added in the latest LoongArch Reference Manual,
define the instruction format and check whether support via CPUCFG.
Furthermore, define the instruction format for DBAR which will be used
to support BPF load-acquire and store-release instructions.
This is preparation for later patches.
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Switch to the batched version of the jump label update functions so
instruction cache maintenance is deferred until the end of the update.
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
LoongArch maintains ICache/DCache coherency by hardware, so we just need
"ibar 0" to avoid instruction hazard here.
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The LoongArch syscall number is directly controlled by userspace, but
does not have a array_index_nospec() boundry to prevent access past the
syscall function pointer tables.
Cc: stable@vger.kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Most LoongArch processors are vulnerable to Spectre-V1 Proof-of-Concept
(PoC). And the generic mechanism, __user pointer sanitization, can be
used as a mitigation. This means to use array_index_nospec() to prevent
out of boundry access in syscall and other critical paths.
Implement the arch-specific cpu_show_spectre_v1() to show CPU Spectre-V1
vulnerabilites correctly.
Cc: stable@vger.kernel.org
Link: https://cc-sw.com/chinese-loongarch-architecture-evaluation-part-3-of-3/
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
After commit 7c405fb327 ("rcu: Use an intermediate irq_work to
start process_srcu()"), Loongson-2K0300/2K0500 fail to boot. Because
IRQ_WORK need IPI but Loongson-2K0300/2K0500 don't have IPI HW.
So make arch_irq_work_has_interrupt() return true only if IPI HW exist.
Cc: stable@vger.kernel.org
Reported-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Like others, replace the custom stack canary initialization with the
get_random_canary() helper, following the pattern established in commit
622754e84b ("stackprotector: actually use get_random_canary()").
Signed-off-by: Luo Qiu <luoqiu@kylinsec.com.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Whether KASLR is disabled is not handled in nokaslr() which is the early
param "nokaslr" setup function, but in kaslr_disabled(). However, the
logging was previously done in nokaslr() and lack detail. So we move the
logging to the right place and add more specific infomation about why it
is disabled.
Suggested-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Yuqian Yang <yangyuqian@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Move fpr to the beginning of struct loongarch_fpu so it is naturally
aligned to FPU_ALIGN (32 bytes), improving 256-bit SIMD (LASX) context
switch performance.
Also adjust process.c and fpu.S to work well with the new loongarch_fpu
layout.
Signed-off-by: Lisa Robinson <lisa@bytefly.space>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
If CONFIG_32BIT is set, it should return AUDIT_ARCH_LOONGARCH32 instead
of AUDIT_ARCH_LOONGARCH64 in syscall_get_arch().
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add HIGHMEM (High Memory) support for LoongArch, mostly needed by 32BIT
kernel because the size of kernel virtual memory space is only 512MB and
the size of usable physical memory is only 256MB in this case.
HIGHMEM adds permanent kernel mapping (PKMAP) and fixed kernel mapping
(FIX_KMAP), which increase usable physical memory up to 2.25GB (2304MB).
We can just use the generic copy_user_highpage(), so remove the custom
version.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Adjust build infrastructure (Kconfig, Makefile and ld scripts) to let
us enable both 32BIT/64BIT kernel build.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
