- Ioremap() msg_res region using res->start (the CPU address), not the ATU
'cpu_addr', which will be replaced with the ATU input address (which may
not be the CPU address) (Frank Li)
- Rename struct dw_pcie_ob_atu_cfg.cpu_addr to 'parent_bus_addr' (Frank Li)
- Call devm_pci_alloc_host_bridge() early in dw_pcie_host_init() to keep
devicetree-related code together (Frank Li)
- Consolidate devicetree handling in dw_pcie_host_get_resources() (Bjorn
Helgaas)
- Add dw_pcie_parent_bus_offset() to look up the parent bus address of a
specified 'reg' property and return the offset from the CPU physical
address (Frank Li)
- Add cross-checking with .cpu_addr_fixup() and debug logging to
dw_pcie_parent_bus_offset() (Frank Li)
- Use devicetree 'reg[config]' via dw_pcie_parent_bus_offset() to derive
CPU -> ATU addr offset for host controller (Frank Li)
- Call epc_create() early in dw_pcie_ep_init() to keep devicetree-related
code together (Bjorn Helgaas)
- Consolidate devicetree handling in dw_pcie_ep_get_resources() (Bjorn
Helgaas)
- Use devicetree 'reg[addr_space]' via dw_pcie_parent_bus_offset() to
derive CPU -> ATU addr offset for endpoint controller (Frank Li)
- Update dw_pcie_find_index() to remove assumption that ATU input address
is non-zero (Frank Li)
- Apply struct dw_pcie.parent_bus_offset in ATU users to remove use of
.cpu_addr_fixup() when programming ATU (Frank Li)
- Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the ATU
input address (using parent_bus_offset) from devicetree (Frank Li)
- Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU input
address (using parent_bus_offset) from devicetree (Frank Li)
* pci/controller/dwc-cpu-addr-fixup:
PCI: intel-gw: Remove intel_pcie_cpu_addr()
PCI: imx6: Remove imx_pcie_cpu_addr_fixup()
PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup()
PCI: dwc: ep: Ensure proper iteration over outbound map windows
PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset
PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources()
PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init()
PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset
PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug
PCI: dwc: Add dw_pcie_parent_bus_offset()
PCI: dwc: Consolidate devicetree handling in dw_pcie_host_get_resources()
PCI: dwc: Call devm_pci_alloc_host_bridge() early in dw_pcie_host_init()
PCI: dwc: Rename cpu_addr to parent_bus_addr for ATU configuration
PCI: dwc: Use resource start as ioremap() input in dw_pcie_pme_turn_off()
# Conflicts:
# drivers/pci/controller/dwc/pcie-designware.c
# drivers/pci/controller/dwc/pcie-designware.h
- Free IRQ domain in probe error path to avoid leaking it (Thippeswamy
Havalige)
- Add DT .compatible "xlnx,versal-cpm5nc-host" and driver support for
Versal Net CPM5NC Root Port controller (Thippeswamy Havalige)
- Add driver support for CPM5_HOST1 (Thippeswamy Havalige)
* pci/controller/xilinx-cpm:
PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variant
PCI: xilinx-cpm: Add support for Versal Net CPM5NC Root Port controller
dt-bindings: PCI: xilinx-cpm: Add compatible string for CPM5NC Versal Net host
PCI: xilinx-cpm: Fix IRQ domain leak in error path of probe
- Convert vmd_dev.cfg_lock from spinlock_t to raw_spinlock_t so
pci_ops.read() will never sleep, even on PREEMPT_RT where spinlock_t
becomes a sleepable lock (Ryo Takakura)
* pci/controller/vmd:
PCI: vmd: Make vmd_dev::cfg_lock a raw_spinlock_t type
- Describe endpoint BAR0 and BAR2 as 64-bit only and BAR1 and BAR3 as
RESERVED (Manivannan Sadhasivam)
- Add optional dma-coherent DT property for Qualcomm SA8775P (Dmitry
Baryshkov)
- Make DT iommu property required for SA8775P and prohibited for SDX55
(Dmitry Baryshkov)
- Add DT iommu and DMA-related properties for Qualcomm SM8450 (Dmitry
Baryshkov)
- Consolidate DMA vs non-DMA cases in DT (Dmitry Baryshkov)
- Add endpoint DT properties for SAR2130P and enable endpoint mode in
driver (Dmitry Baryshkov)
* pci/controller/qcom:
PCI: qcom-ep: Enable EP mode support for SAR2130P
dt-bindings: PCI: qcom-ep: Add SAR2130P compatible
dt-bindings: PCI: qcom-ep: Consolidate DMA vs non-DMA cases
dt-bindings: PCI: qcom-ep: Enable DMA for SM8450
dt-bindings: PCI: qcom-ep: Describe optional IOMMU
dt-bindings: PCI: qcom-ep: Describe optional dma-coherent property
PCI: qcom-ep: Mark BAR0/BAR2 as 64bit BARs and BAR1/BAR3 as RESERVED
- Correct the 'link down' interrupt bit for J784S4 (Siddharth Vadapalli)
* pci/controller/j721e:
PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4
- Identify the second controller on i.MX8MQ based on devicetree
'linux,pci-domain' instead of DBI 'reg' address (Richard Zhu)
- Use devm_clk_bulk_get_all() to fetch clocks to simplify the code (Richard
Zhu)
* pci/controller/imx6:
PCI: imx6: Use devm_clk_bulk_get_all() to fetch clocks
PCI: imx6: Identify controller via 'linux,pci-domain', not address
- Correct comment to say that invalidations from a PF driver are delivered
to the VF endpoint driver, not by the VF driver (Easwar Hariharan)
* pci/controller/hyperv:
PCI: hv: Correct a comment
- Call phy_exit() to clean up if histb_pcie_probe() fails (Christophe
JAILLET)
* pci/controller/histb:
PCI: histb: Fix an error handling path in histb_pcie_probe()
- Move struct dwc_pcie_vsec_id to include/linux/pcie-dwc.h, where it can be
shared by debugfs, perf, sysfs, etc (Manivannan Sadhasivam)
- Add dw_pcie_find_vsec_capability() to locate Vendor Specific Extended
Capabilities (Shradha Todi)
- Add debugfs-based Silicon Debug, Error Injection, Statistical Counter
support for DWC (Shradha Todi)
- Add debugfs property to expose LTSSM status of DWC PCIe link (Hans Zhang)
- Add Rockchip Vendor ID and Vendor Specific ID of RAS DES Capability so
the DWC debugfs features work for Rockchip as well (Niklas Cassel)
* pci/controller/dwc:
PCI: dw-rockchip: Hide broken ATS capability for RK3588 running in EP mode
PCI: dwc: ep: Add dw_pcie_ep_hide_ext_capability()
PCI: dwc: ep: Return -ENOMEM for allocation failures
PCI: dwc: Add Rockchip to the RAS DES allowed vendor list
PCI: Add Rockchip Vendor ID
PCI: dwc: Add debugfs property to provide LTSSM status of the PCIe link
PCI: dwc: Add debugfs based Statistical Counter support for DWC
PCI: dwc: Add debugfs based Error Injection support for DWC
PCI: dwc: Add debugfs based Silicon Debug support for DWC
PCI: dwc: Add helper to find the Vendor Specific Extended Capability (VSEC)
perf/dwc_pcie: Move common DWC struct definitions to 'pcie-dwc.h'
- Correct MSG TLP generation so endpoint can generate INTx messages (Hans
Zhang)
* pci/controller/cadence:
PCI: cadence-ep: Fix the driver to send MSG TLP for INTx without data payload
- Add missing of_node refcount release after of_parse_phandle() (Stanimir
Varbanov)
- Add BCM2712 MSI-X DT binding and interrupt controller drivers (Stanimir
Varbanov)
- Add brcmstb softdep on irq_bcm2712_mip MIP MSI-X interrupt controller
driver to ensure that it is loaded first (Stanimir Varbanov)
- Add struct brcm_pcie pointer to pcie_cfg_data so we can reference the
pcie_cfg_data directly instead of copying it to brcm_pcie (Stanimir
Varbanov)
- Expand inbound window map to 64GB so it can accommodate BCM2712 (Stanimir
Varbanov)
- Add BCM2712 support and DT updates (Stanimir Varbanov)
- Apply link speed restriction before bringing link up, not after (Jim
Quinlan)
- Update Max Link Speed in Link Capabilities via the internal writable
register, not the read-only config register (Jim Quinlan)
- Handle regulator_bulk_get() error to avoid panic when we call
regulator_bulk_free() later (Jim Quinlan)
- Disable regulators only when removing the bus immediately below a Root
Port because we don't support regulators deeper in the hierarchy (Jim
Quinlan)
- Consistently use config access index/data register offsets from the
SoC-specific pcie_offsets[] table (Jim Quinlan)
- Update MDIO register fields that reduced CMD from 12 bits to 1 and
widened PORT from 4 bits to 5 and split it into two parts (Jim Quinlan)
- Make const read-only arrays static (Colin Ian King)
* pci/controller/brcmstb:
PCI: brcmstb: Make const read-only arrays static
PCI: brcmstb: Make irq_domain_set_info() parameter cast explicit
PCI: brcmstb: Make two changes in MDIO register fields
PCI: brcmstb: Use same constant table for config space access
PCI: brcmstb: Fix potential premature regulator disabling
PCI: brcmstb: Fix error path after a call to regulator_bulk_get()
PCI: brcmstb: Do not assume that register field starts at LSB
PCI: brcmstb: Use internal register to change link capability
PCI: brcmstb: Set generation limit before PCIe link up
PCI: brcmstb: Add BCM2712 support
PCI: brcmstb: Expand inbound window size up to 64GB
PCI: brcmstb: Reuse pcie_cfg_data structure
PCI: brcmstb: Add a softdep to MIP MSI-X driver
irqchip: Add Broadcom BCM2712 MSI-X interrupt controller
dt-bindings: PCI: brcmstb: Update bindings for PCIe on BCM2712
dt-bindings: interrupt-controller: Add BCM2712 MSI-X bindings
PCI: brcmstb: Fix missing of_node_put() in brcm_pcie_probe()
- Add DT binding for Agilex family (P-Tile, F-Tile, R-Tile) (Matthew
Gerlach)
- Add driver support for Agilex family (P-Tile, F-Tile, R-Tile) (D M,
Sharath Kumar)
* pci/controller/altera:
PCI: altera: Add Agilex support
dt-bindings: PCI: altera: Add binding for Agilex
- Use for_each_available_child_of_node_scoped() to simplify apple, kirin,
mediatek, mt7621, tegra drivers (Zhang Zekun)
* pci/scoped-cleanup:
PCI: tegra: Use helper function for_each_child_of_node_scoped()
PCI: apple: Use helper function for_each_child_of_node_scoped()
PCI: mt7621: Use helper function for_each_available_child_of_node_scoped()
PCI: mediatek: Use helper function for_each_available_child_of_node_scoped()
PCI: kirin: Tidy up _probe() related function with dev_err_probe()
PCI: kirin: Use helper function for_each_available_child_of_node_scoped()
- Fix endpoint BAR testing so the test can skip disabled BARs instead of
reporting them as failures (Niklas Cassel)
- Verify that pci_endpoint interrupt tests set the correct IRQ type
(Kunihiko Hayashi)
- Fix interpretation of pci_endpoint_test_bars_read_bar() error returns
(Niklas Cassel)
- Fix potential string truncation in pci_endpoint_test_probe() (Niklas
Cassel)
- Increase endpoint test BAR size variable to accommodate BARs larger than
INT_MAX (Niklas Cassel)
- Release IRQs to avoid leak in pci_endpoint interrupt tests (Kunihiko
Hayashi)
- Log the correct IRQ type when pci_endpoint IRQ request test fails
(Kunihiko Hayashi)
- Remove pci_endpoint_test irq_type and no_msi globals; instead use
test->irq_type (Kunihiko Hayashi)
- Remove unnecessary use of managed IRQ functions in pci_endpoint_test
(Kunihiko Hayashi)
- Add and use IRQ_TYPE_* defines in pci_endpoint_test (Niklas Cassel)
- Add struct pci_epc_features.intx_capable and note that RK3568 and RK3588
can't raise INTx interrupts (Niklas Cassel)
- Expose supported IRQ types in CAPS so pci_endpoint_test can set
appropriate type (Niklas Cassel)
- Add PCITEST_IRQ_TYPE_AUTO to pci_endpoint_test for cases where the IRQ
type doesn't matter (Niklas Cassel)
* pci/endpoint-test:
misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO
PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register
PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts
PCI: endpoint: Add intx_capable to epc_features struct
selftests: pci_endpoint: Use IRQ_TYPE_* defines from UAPI header
misc: pci_endpoint_test: Use IRQ_TYPE_* defines from UAPI header
PCI: endpoint: pcitest: Add IRQ_TYPE_* defines to UAPI header
misc: pci_endpoint_test: Do not use managed IRQ functions
misc: pci_endpoint_test: Remove global 'irq_type' and 'no_msi'
misc: pci_endpoint_test: Fix 'irq_type' to convey the correct type
misc: pci_endpoint_test: Fix displaying 'irq_type' after 'request_irq' error
misc: pci_endpoint_test: Avoid issue of interrupts remaining after request_irq error
misc: pci_endpoint_test: Handle BAR sizes larger than INT_MAX
misc: pci_endpoint_test: Give disabled BARs a distinct error code
misc: pci_endpoint_test: Fix potential truncation in pci_endpoint_test_probe()
misc: pci_endpoint_test: Fix pci_endpoint_test_bars_read_bar() error handling
selftests: pci_endpoint: Add GET_IRQTYPE checks to each interrupt test
selftests: pci_endpoint: Skip disabled BARs
- Convert PCI device data so pci-epf-test works correctly on big-endian
endpoint systems (Niklas Cassel)
- Add BAR_RESIZABLE type to endpoint framework (Niklas Cassel)
- Add pci_epc_bar_size_to_rebar_cap() to convert a size to the Resizable
BAR Capability so endpoint drivers can configure what the Capability
register advertises (Niklas Cassel)
- Add DWC core support for EPF drivers to set BAR_RESIZABLE type and size
via dw_pcie_ep_set_bar() (Niklas Cassel)
- Describe TI AM65x (keystone) BARs 2 and 5 as Resizable, not Fixed
(Niklas Cassel)
- Reduce TI AM65x (keystone) BAR alignment requirement from 1MB to 64KB
(Niklas Cassel)
- Describe Rockchip rk3568 and rk3588 BARs as Resizable, not Fixed (Niklas
Cassel)
- Drop unused devm_pci_epc_destroy() (Zijun Hu)
- Fix pci-epf-test double free that causes an oops if the host reboots and
PERST# deassertion restarts endpoint BAR allocation (Christian Bruel)
- Drop dw_pcie_ep_find_ext_capability() and use
dw_pcie_find_ext_capability() instead (Niklas Cassel)
* pci/endpoint:
PCI: dwc: ep: Remove superfluous function dw_pcie_ep_find_ext_capability()
PCI: endpoint: pci-epf-test: Fix double free that causes kernel to oops
PCI: endpoint: Remove unused devm_pci_epc_destroy()
PCI: dw-rockchip: Describe Resizable BARs as Resizable BARs
PCI: keystone: Specify correct alignment requirement
PCI: keystone: Describe Resizable BARs as Resizable BARs
PCI: dwc: ep: Allow EPF drivers to configure the size of Resizable BARs
PCI: dwc: ep: Move dw_pcie_ep_find_ext_capability()
PCI: endpoint: Add pci_epc_bar_size_to_rebar_cap()
PCI: endpoint: Allow EPF drivers to configure the size of Resizable BARs
PCI: endpoint: pci-epf-test: Handle endianness properly
- Add qcom,pcie-ipq5332 binding (Varadarajan Narayanan)
- Convert fsl,mpc83xx-pcie binding to YAML (J. Neuschäfer)
- Add qcom i.MX8QM and i.MX8QXP/DXP optional DMA interrupt (Alexander
Stein)
- Drop deprecated layerscape 'num-ib-windows' and 'num-ob-windows' from
example (Krzysztof Kozlowski)
- Drop unnecessary layerscape 'status' from example (Krzysztof Kozlowski)
- Add common pci-ep-bus.yaml schema for exporting several peripherals of a
single PCI function via devicetree (Andrea della Porta)
* pci/dt-bindings:
dt-bindings: PCI: Add common schema for devices accessible through PCI BARs
dt-bindings: PCI: fsl,layerscape-pcie-ep: Drop unnecessary status from example
dt-bindings: PCI: fsl,layerscape-pcie-ep: Drop deprecated windows
dt-bindings: PCI: fsl,imx6q-pcie: Add optional DMA interrupt
dt-bindings: PCI: Convert fsl,mpc83xx-pcie to YAML
dt-bindings: PCI: qcom: Document the IPQ5332 PCIe controller
- Add device_add_of_node() to set dev->of_node and dev->fwnode only if they
haven't been set already (Herve Codina)
- Allow of_pci_set_address() to set the DT address property for root bus
nodes, where there is no PCI bridge to supply the PCI bus/device/function
part of the property (Herve Codina)
- Create DT nodes for PCI host bridges to enable loading device tree
overlays to create platform devices for PCI devices that have several
features that require multiple drivers (Herve Codina)
* pci/devtree-create:
PCI: of: Create device tree PCI host bridge node
PCI: of_property: Constify parameter in of_pci_get_addr_flags()
PCI: of_property: Add support for NULL pdev in of_pci_set_address()
PCI: of: Use device_{add,remove}_of_node() to attach of_node to existing device
driver core: Introduce device_{add,remove}_of_node()
- Use pci_resource_n() to simplify BAR/window resource lookup (Ilpo
Järvinen)
- Fix typo that repeatedly distributed resources to a bridge instead of
iterating over subordinate bridges, which resulted in too little space to
assign some BARs (Kai-Heng Feng)
- Relax bridge window tail sizing for optional resources, e.g., IOV BARs,
to avoid failures when removing and re-adding devices (Ilpo Järvinen)
- Fix a double counting error for I/O resources, as we previously did for
memory resources (Ilpo Järvinen)
- Use resource_set_{range,size}() helpers in more places (Ilpo Järvinen)
- Add pci_resource_is_iov() to identify IOV resources (Ilpo Järvinen)
- Add pci_resource_num() to look up the BAR number from the resource
pointer (Ilpo Järvinen)
- Add restore_dev_resource() to simplify code that resources saved device
resources (Ilpo Järvinen)
- Allow drivers to enable devices even if we haven't assigned optional IOV
resources to them (Ilpo Järvinen)
- Improve debug output during resource reallocation (Ilpo Järvinen)
- Rework handling of optional resources (IOV BARs, ROMs) to reduce failures
if we can't allocate them (Ilpo Järvinen)
- Move declarations of pci_rescan_bus_bridge_resize(),
pci_reassign_bridge_resources(), and CardBus-related sizes from
include/linux/pci.h to drivers/pci/pci.h since they're not used outside
the PCI core (Ilpo Järvinen)
- Make pci_setup_bridge() static (Ilpo Järvinen)
- Fix a NULL dereference in the SR-IOV VF creation error path (Shay Drory)
- Fix s390 mmio_read/write syscalls, which didn't cause page faults in some
cases, which broke vfio-pci lazy mapping on first access (Niklas
Schnelle)
- Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which was
disabled only for s390 (Niklas Schnelle)
- Support mmap of PCI resources on s390 except for ISM devices (Niklas
Schnelle)
* pci/resource:
s390/pci: Support mmap() of PCI resources except for ISM devices
s390/pci: Introduce pdev->non_mappable_bars and replace VFIO_PCI_MMAP
s390/pci: Fix s390_mmio_read/write syscall page fault handling
PCI: Fix NULL dereference in SR-IOV VF creation error path
PCI: Move cardbus IO size declarations into pci/pci.h
PCI: Make pci_setup_bridge() static
PCI: Move resource reassignment func declarations into pci/pci.h
PCI: Move pci_rescan_bus_bridge_resize() declaration to pci/pci.h
PCI: Fix BAR resizing when VF BARs are assigned
PCI: Do not claim to release resource falsely
PCI: Increase Resizable BAR support from 512 GB to 128 TB
PCI: Rework optional resource handling
PCI: Perform reset_resource() and build fail list in sync
PCI: Use res->parent to check if resource is assigned
PCI: Add debug print when releasing resources before retry
PCI: Indicate optional resource assignment failures
PCI: Always have realloc_head in __assign_resources_sorted()
PCI: Extend enable to check for any optional resource
PCI: Add restore_dev_resource()
PCI: Remove incorrect comment from pci_reassign_resource()
PCI: Consolidate assignment loop next round preparation
PCI: Rename retval to ret
PCI: Use while loop and break instead of gotos
PCI: Refactor pdev_sort_resources() & __dev_sort_resources()
PCI: Converge return paths in __assign_resources_sorted()
PCI: Add dev & res local variables to resource assignment funcs
PCI: Add pci_resource_num() helper
PCI: Check resource_size() separately
PCI: Add pci_resource_is_iov() to identify IOV resources
PCI: Use resource_set_{range,size}() helpers
PCI: Use SZ_* instead of literals in setup-bus.c
PCI: Fix old_size lower bound in calculate_iosize() too
PCI: Allow relaxed bridge window tail sizing for optional resources
PCI: Simplify size1 assignment logic
PCI: Use min_align, not unrelated add_align, for size0
PCI: Remove add_align overwrite unrelated to size0
PCI: Use downstream bridges for distributing resources
PCI: Cleanup dev->resource + resno to use pci_resource_n()
- Log debug messages about reset methods being used (Bjorn Helgaas)
- Avoid reset when it has been disabled via sysfs (Nishanth Aravamudan)
* pci/reset:
PCI: Avoid reset when disabled via sysfs
PCI: Log debug messages about reset method
- Create pwrctrl devices in pci_scan_device() to make it more symmetric
with pci_pwrctrl_unregister() and make pwrctrl devices for PCI bridges
possible (Manivannan Sadhasivam)
- Unregister pwrctrl devices in pci_destroy_dev() so DOE, ASPM, etc. can
still access devices after pci_stop_dev() (Manivannan Sadhasivam)
- If there's a pwrctrl device for a PCI device, skip scanning it because
the pwrctrl core will rescan the bus after the device is powered on
(Manivannan Sadhasivam)
- Add a pwrctrl driver for PCI slots based on voltage regulators described
via devicetree (Manivannan Sadhasivam)
* pci/pwrctrl:
PCI/pwrctrl: Add pwrctrl driver for PCI slots
dt-bindings: vendor-prefixes: Document the 'pciclass' prefix
PCI/pwrctrl: Skip scanning for the device further if pwrctrl device is created
PCI/pwrctrl: Move pci_pwrctrl_unregister() to pci_destroy_dev()
PCI/pwrctrl: Move creation of pwrctrl devices to pci_scan_device()
- Drop shpchp module init/exit logging (Ilpo Järvinen)
- Replace shpchp dbg() with ctrl_dbg() and remove unused dbg(), err(),
info(), warn() wrappers (Ilpo Järvinen)
- Drop 'shpchp_debug' module parameter in favor of standard dynamic
debugging (Ilpo Järvinen)
- Drop unused .get_power(), .set_power() function pointers (Guilherme
Giacomo Simoes)
- Drop superfluous pci_hotplug_slot_list (Lukas Wunner)
- Drop superfluous try_module_get() calls (Lukas Wunner)
- Drop superfluous NULL pointer checks (Lukas Wunner)
- Pass struct hotplug_slot pointers directly to avoid backpointer
dereferencing in has_*_file() (Lukas Wunner)
- Inline pci_hp_{create,remove}_module_link() to reduce exported symbols
(Lukas Wunner)
- Disable hotplug interrupts in portdrv only when pciehp is not enabled to
prevent issuing two hotplug commands too close together (Feng Tang)
- Skip pciehp 'device replaced' check if the device has been removed to
address a common deadlock when resuming after a device was removed during
system sleep (Lukas Wunner)
- Don't enable pciehp hotplug interupt when resuming in poll mode (Ilpo
Järvinen)
* pci/hotplug:
PCI: pciehp: Don't enable HPIE when resuming in poll mode
PCI: pciehp: Avoid unnecessary device replacement check
PCI/portdrv: Only disable pciehp interrupts early when needed
PCI: hotplug: Inline pci_hp_{create,remove}_module_link()
PCI: hotplug: Avoid backpointer dereferencing in has_*_file()
PCI: hotplug: Drop superfluous NULL pointer checks in has_*_file()
PCI: hotplug: Drop superfluous try_module_get() calls
PCI: hotplug: Drop superfluous pci_hotplug_slot_list
PCI: cpcihp: Remove unused .get_power() and .set_power()
PCI: shpchp: Remove 'shpchp_debug' module parameter
PCI: shpchp: Remove unused logging wrappers
PCI: shpchp: Change dbg() -> ctrl_dbg()
PCI: shpchp: Remove logging from module init/exit functions
- Enable Configuration RRS SV early instead of during child bus scanning
(Bjorn Helgaas)
- Cache offset of Resizable BAR capability to avoid redundant searches for
it (Bjorn Helgaas)
- Fix reference leaks in pci_register_host_bridge() and
pci_alloc_child_bus() (Ma Ke)
- Drop put_device() in pci_register_host_bridge() left over from converting
device_register() to device_add() (Dan Carpenter)
* pci/enumeration:
PCI: Remove stray put_device() in pci_register_host_bridge()
PCI: Fix reference leak in pci_alloc_child_bus()
PCI: Fix reference leak in pci_register_host_bridge()
PCI: Cache offset of Resizable BAR capability
PCI: Enable Configuration RRS SV early
- Rename DOE 'protocol' to 'feature' to follow spec terminology (Alistair
Francis)
- Expose supported DOE features via sysfs (Alistair Francis)
- Allow DOE support to be enabled even if CXL isn't enabled (Alistair
Francis)
* pci/doe:
PCI/DOE: Allow enabling DOE without CXL
PCI/DOE: Expose DOE features via sysfs
PCI/DOE: Rename Discovery Response Data Object Contents to type
PCI/DOE: Rename DOE protocol to feature
- Enlarge the devres table[] to accommodate bridge windows, ROM, IOV BARs,
etc (Philipp Stanner)
- Validate BAR index in devres interfaces (Philipp Stanner)
* pci/devres:
PCI: Check BAR index for validity
PCI: Fix wrong length of devres array
- Add set_pcie_speed.sh to TEST_PROGS to fix issue when executing the
set_pcie_cooling_state.sh test case (Yi Lai)
- Fix the pcie_bwctrl_select_speed() return value in cases where a
non-compliant device doesn't advertise valid supported speeds (Ilpo
Järvinen)
- Avoid a NULL pointer dereference when we run out of bus numbers to assign
for a bridge secondary bus (Lukas Wunner)
* pci/bwctrl:
PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion
PCI/bwctrl: Fix pcie_bwctrl_select_speed() return type
selftests/pcie_bwctrl: Add 'set_pcie_speed.sh' to TEST_PROGS
- Delay pcie_link_state deallocation to avoid dangling pointers that cause
invalid references during hot-unplug (Daniel Stodden)
* pci/aspm:
PCI/ASPM: Fix link state exit during switch upstream function removal
- Implement local aer_printk() since AER is the only place that prints a
message with level depending on the error severity (Ilpo Järvinen)
* pci/aer:
PCI/ERR: Handle TLP Log in Flit mode
PCI: Track Flit Mode Status & print it with link status
PCI/AER: Descope pci_printk() to aer_printk()
The arg_count parameter to syscon_regmap_lookup_by_phandle_args()
represents the number of argument cells following the phandle. In this
case, the number of arguments should be 1 instead of 2 since the dt
property looks like this:
fsl,pcie-scfg = <&scfg 0>;
Without this fix, layerscape-pcie fails with the following message on
LS1043A:
OF: /soc/pcie@3500000: phandle scfg@1570000 needs 2, found 1
layerscape-pcie 3500000.pcie: No syscfg phandle specified
layerscape-pcie 3500000.pcie: probe with driver layerscape-pcie failed with error -22
Link: https://lore.kernel.org/r/20250327151949.2765193-1-ioana.ciornei@nxp.com
Fixes: 149fc35734 ("PCI: layerscape: Use syscon_regmap_lookup_by_phandle_args")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Roy Zang <Roy.Zang@nxp.com>
Cc: stable@vger.kernel.org
Commit e49ad66781 ("PCI: j721e: Add TI J784S4 PCIe configuration")
assigned the value of .linkdown_irq_regfield for the J784S4 SoC as the
"LINK_DOWN" macro corresponding to BIT(1), and as a result, the Link
Down interrupts on J784S4 SoC are missed.
According to the Technical Reference Manual and Register Documentation
for the J784S4 SoC[1], BIT(1) corresponds to "ENABLE_SYS_EN_PCIE_DPA_1",
which is not the correct field for the link-state interrupt. Instead, it
is BIT(10) of the "PCIE_INTD_ENABLE_REG_SYS_2" register that corresponds
to the link-state field named as "ENABLE_SYS_EN_PCIE_LINK_STATE".
Thus, set .linkdown_irq_regfield to the macro "J7200_LINK_DOWN", which
expands to BIT(10) and was first defined for the J7200 SoC. Other SoCs
already reuse this macro since it accurately represents the "link-state"
field in their respective "PCIE_INTD_ENABLE_REG_SYS_2" register.
1: https://www.ti.com/lit/zip/spruj52
Fixes: e49ad66781 ("PCI: j721e: Add TI J784S4 PCIe configuration")
Cc: stable@vger.kernel.org
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
[kwilczynski: commit log, add a missing .linkdown_irq_regfield member
set to the J7200_LINK_DOWN macro to struct j7200_pcie_ep_data]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250305132018.2260771-1-s-vadapalli@ti.com
For PCITEST_MSI we really want to set PCITEST_SET_IRQTYPE explicitly
to PCITEST_IRQ_TYPE_MSI, since we want to test if MSI works.
For PCITEST_MSIX we really want to set PCITEST_SET_IRQTYPE explicitly
to PCITEST_IRQ_TYPE_MSIX, since we want to test if MSI works.
For PCITEST_LEGACY_IRQ we really want to set PCITEST_SET_IRQTYPE
explicitly to PCITEST_IRQ_TYPE_INTX, since we want to test if INTx
works.
However, for PCITEST_WRITE, PCITEST_READ, PCITEST_COPY, we really don't
care which IRQ type that is used, we just want to use a IRQ type that is
supported by the EPC.
The old behavior was to always use MSI for PCITEST_WRITE, PCITEST_READ,
PCITEST_COPY, was to always set IRQ type to MSI before doing the actual
test, however, there are EPC drivers that do not support MSI.
Add a new PCITEST_IRQ_TYPE_AUTO, that will use the CAPS register to see
which IRQ types the endpoint supports, and use one of the supported IRQ
types.
For backwards compatibility, if the endpoint does not expose any supported
IRQ type in the CAPS register, simply fallback to using MSI, as it was
unconditionally done before.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310111016.859445-16-cassel@kernel.org
Expose the supported IRQ types in the CAPS register.
This way, the host side driver (drivers/misc/pci_endpoint_test.c) can
know which IRQ types that the endpoint supports.
The host side driver will make use of this information in a follow-up
commit.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310111016.859445-15-cassel@kernel.org
Neither RK3568 or RK3588 supports INTx interrupts.
Since epc_features is zero initialized, this is strictly not needed.
However, setting intx_capable explicitly to false makes it more clear
that neither RK3568 or RK3588 supports INTx interrupts.
No functional change.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310111016.859445-14-cassel@kernel.org
In struct pci_epc_features, an EPC driver can already specify if they
support MSI (by setting msi_capable) and MSI-X (by setting msix_capable).
Thus, for consistency, allow an EPC driver to specify if it supports
INTx interrupts as well (by setting intx_capable).
Since this struct is zero initialized, EPC drivers that want to claim
INTx support will need to set intx_capable to true.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[kwilczynski: add missing kernel-doc for "intx_capable"]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310111016.859445-13-cassel@kernel.org
We know the parent_bus_offset, either computed from a DT reg property (the
offset is the CPU physical addr - the 'config'/'addr_space' address on the
parent bus) or from a .cpu_addr_fixup() (which may have used a host bridge
window offset).
Apply that parent_bus_offset instead of calling .cpu_addr_fixup() when
programming the ATU.
This assumes all intermediate addresses are at the same offset from the CPU
physical addresses.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20250315201548.858189-13-helgaas@kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Most systems' PCIe outbound map windows have non-zero physical addresses,
but the possibility of encountering zero increased after following commit
("PCI: dwc: Use parent_bus_offset").
'ep->outbound_addr[n]', representing 'parent_bus_address', might be 0 on
some hardware, which trims high address bits through bus fabric before
sending to the PCIe controller.
Replace the iteration logic with 'for_each_set_bit()' to ensure only
allocated map windows are iterated when determining the ATU index from a
given address.
Link: https://lore.kernel.org/r/20250315201548.858189-12-helgaas@kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Endpoint
┌───────────────────────────────────────────────┐
│ pcie-ep@5f010000 │
│ ┌────────────────┐│
│ │ Endpoint ││
│ │ PCIe ││
│ │ Controller ││
│ bus@5f000000 │ ┌────────►
│ ┌──────────┐ │ │ ││dynamically
│ │ │ Outbound Transfer │ ││allocated
│┌─────┐ │ Bus ┼─────►│ ATU ───────┘ ││PCI Addr
││ │ │ Fabric │Bus │ ││
││ CPU ├───►│ │Addr │ ││
││ │CPU │ │0x8000_0000 ││
│└─────┘Addr└──────────┘ │ ││
│ 0x7000_0000 └────────────────┘│
└───────────────────────────────────────────────┘
bus@5f000000 {
compatible = "simple-bus";
ranges = <0x80000000 0x0 0x70000000 0x10000000>;
pcie-ep@5f010000 {
reg = <0x80000000 0x10000000>;
reg-names ="addr_space";
...
};
...
};
In the diagram above, CPU writes data to outbound window address
0x7000_0000, and the bus fabric maps it to 0x8000_0000. The ATU uses
bus address 0x8000_0000 as input address and maps to some PCI address
dynamically allocated by a PCI device driver on the host side.
The pcie-ep@5f010000 'reg[addr_space]' is the parent bus address, which is
the input of PCIe controller, including the ATU.
Set parent_bus_offset, the offset from the CPU address to the PCIe
controller input address using dw_pcie_init_parent_bus_offset(). The
parent_bus_offset is not used yet, so no functional change intended.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20250315201548.858189-11-helgaas@kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The 'ranges' property of a PCI controller's parent can indicate address
translation information. Most system use 1:1 map between CPU physical and
PCI controller input addresses.
But some hardware, like i.MX8QXP, doesn't use 1:1 map. See below diagram:
┌─────────┐ ┌────────────┐
┌─────┐ │ │ IA: 0x8ff8_0000 │ │
│ CPU ├───►│ ┌────►├─────────────────┐ │ PCI │
└─────┘ │ │ │ IA: 0x8ff0_0000 │ │ │
CPU Addr │ │ ┌─►├─────────────┐ │ │ Controller │
0x7ff8_0000─┼───┘ │ │ │ │ │ │
│ │ │ │ │ │ │ PCI Addr
0x7ff0_0000─┼──────┘ │ │ └──► IOSpace ─┼────────────►
│ │ │ │ │ 0
0x7000_0000─┼────────►├─────────┐ │ │ │
└─────────┘ │ └──────► CfgSpace ─┼────────────►
Bus Fabric │ │ │ 0
│ │ │
└──────────► MemSpace ─┼────────────►
IA: 0x8000_0000 │ │ 0x8000_0000
└────────────┘
bus@5f000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x80000000 0x0 0x70000000 0x10000000>;
pcie@5f010000 {
compatible = "fsl,imx8q-pcie";
reg = <0x5f010000 0x10000>, <0x8ff00000 0x80000>;
reg-names = "dbi", "config";
...
};
};
Intermediate address (IA) here means the PCIe controller input address.
The pcie@5f010000 'reg[config]' address is the parent bus (PCIe controller
input) address of CfgSpace.
The ATU in MemSpace is not explicitly described via devicetree, so we
assume the offset from CPU address to intermediate MemSpace address is the
same as that for CfgSpace.
We could use bus@5f000000 'ranges' for the same purpose.
Set parent_bus_offset using dw_pcie_init_parent_bus_offset(). The
parent_bus_offset is not used yet, so no functional change intended.
Link: https://lore.kernel.org/r/20250315201548.858189-8-helgaas@kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
dw_pcie_parent_bus_offset() looks up the parent bus address of a PCI
controller 'reg' property in devicetree. If implemented, .cpu_addr_fixup()
is a hard-coded way to get the parent bus address corresponding to a CPU
physical address.
Add debug code to compare the address from .cpu_addr_fixup() with the
address from devicetree. If they match, warn that .cpu_addr_fixup() is
redundant and should be removed; if they differ, warn that something is
wrong with the devicetree.
If .cpu_addr_fixup() is not implemented, the parent bus address should be
identical to the CPU physical address because we previously ignored the
parent bus address from devicetree. If the devicetree has a different
parent bus address, warn about it being broken.
[bhelgaas: split debug to separate patch for easier future revert, commit
log]
Link: https://lore.kernel.org/r/20250315201548.858189-7-helgaas@kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[bhelgaas: squash Ioana Ciornei <ioana.ciornei@nxp.com> fix for NULL
pointer deref when driver doesn't supply dw_pcie_ops, e.g., layerscape-pcie
https://lore.kernel.org/r/20250319134339.3114817-1-ioana.ciornei@nxp.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Return the offset from CPU physical address to the parent bus address of
the specified element of the devicetree 'reg' property.
[bhelgaas: cpu_phy_addr -> cpu_phys_addr, return offset, split
.cpu_addr_fixup() checking and debug to separate patch]
Link: https://lore.kernel.org/r/20250315201548.858189-6-helgaas@kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
