When virtio-rng device was dropped by the hwrng core we were forced
to wait the buffer to come back from the device to not have
remaining ongoing operation that could spoil the buffer.
But now, as the buffer is internal to the virtio-rng we can release
the waiting loop immediately, the buffer will be retrieve and use
when the virtio-rng driver will be selected again.
This avoids to hang on an rng_current write command if the virtio-rng
device is blocked by a lack of entropy. This allows to select
another entropy source if the current one is empty.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://lore.kernel.org/r/20211028101111.128049-3-lvivier@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
hwrng core uses two buffers that can be mixed in the
virtio-rng queue.
If the buffer is provided with wait=0 it is enqueued in the
virtio-rng queue but unused by the caller.
On the next call, core provides another buffer but the
first one is filled instead and the new one queued.
And the caller reads the data from the new one that is not
updated, and the data in the first one are lost.
To avoid this mix, virtio-rng needs to use its own unique
internal buffer at a cost of a data copy to the caller buffer.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://lore.kernel.org/r/20211028101111.128049-2-lvivier@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add code to register to hardware asynchronous events. Use this
mechanism to track link status events coming from the device and update
the config struct.
After doing link status change, call the vdpa callback to notify of the
link status change.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210909123635.30884-4-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
No need to save the mtu int the net device struct. We can save it in the
config struct which cannot be modified.
Moreover, move the initialization to. mlx5_vdpa_set_features() callback
is not the right place to put it.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210909123635.30884-2-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
No need to pre-allocate a big buffer for the IO SGL anymore. If a device
has lots of deep queues, preallocation for the sg list can consume
substantial amounts of memory. For HW virtio-blk device, nr_hw_queues
can be 64 or 128 and each queue's depth might be 128. This means the
resulting preallocation for the data SGLs is big.
Switch to runtime allocation for SGL for lists longer than 2 entries.
This is the approach used by NVMe drivers so it should be reasonable for
virtio block as well. Runtime SGL allocation has always been the case
for the legacy I/O path so this is nothing new.
The preallocated small SGL depends on SG_CHAIN so if the ARCH doesn't
support SG_CHAIN, use only runtime allocation for the SGL.
Re-organize the setup of the IO request to fit the new sg chain
mechanism.
No performance degradation was seen (fio libaio engine with 16 jobs and
128 iodepth):
IO size IOPs Rand Read (before/after) IOPs Rand Write (before/after)
-------- --------------------------------- ----------------------------------
512B 318K/316K 329K/325K
4KB 323K/321K 353K/349K
16KB 199K/208K 250K/275K
128KB 36K/36.1K 39.2K/41.7K
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Link: https://lore.kernel.org/r/20210901131434.31158-1-mgurtovoy@nvidia.com
Reviewed-by: Feng Li <lifeng1519@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de> # kconfig fixups
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make tailroom math follow same logic as everything else, subtracing
values in the order in which things are laid out in the buffer.
Tested-by: Corentin Noël <corentin.noel@collabora.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix compilation of callchain related code on powerpc with gcc11+
- Fix PERF_SAMPLE_WEIGHT_STRUCT support in 'perf script'
- Check session->header.env.arch before using it, fixing a segmentation
fault
- Suppress 'rm dlfilter' build messages
* tag 'perf-tools-fixes-for-v5.15-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf script: Fix PERF_SAMPLE_WEIGHT_STRUCT support
perf callchain: Fix compilation on powerpc with gcc11+
perf script: Check session->header.env.arch before using it
perf build: Suppress 'rm dlfilter' build message
Pull kvm fixes from Paolo Bonzini:
- Fixes for s390 interrupt delivery
- Fixes for Xen emulator bugs showing up as debug kernel WARNs
- Fix another issue with SEV/ES string I/O VMGEXITs
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Take srcu lock in post_kvm_run_save()
KVM: SEV-ES: fix another issue with string I/O VMGEXITs
KVM: x86/xen: Fix kvm_xen_has_interrupt() sleeping in kvm_vcpu_block()
KVM: x86: switch pvclock_gtod_sync_lock to a raw spinlock
KVM: s390: preserve deliverable_mask in __airqs_kick_single_vcpu
KVM: s390: clear kicked_mask before sleeping again
-F weight in perf script is broken.
# ./perf mem record
# ./perf script -F weight
Samples for 'dummy:HG' event do not have WEIGHT attribute set. Cannot
print 'weight' field.
The sample type, PERF_SAMPLE_WEIGHT_STRUCT, is an alternative of the
PERF_SAMPLE_WEIGHT sample type. They share the same space, weight. The
lower 32 bits are exactly the same for both sample type. The higher 32
bits may be different for different architecture. For a new kernel on
x86, the PERF_SAMPLE_WEIGHT_STRUCT is used. For an old kernel or other
ARCHs, the PERF_SAMPLE_WEIGHT is used.
With -F weight, current perf script will only check the input string
"weight" with the PERF_SAMPLE_WEIGHT sample type. Because the commit
ea8d0ed6ea ("perf tools: Support PERF_SAMPLE_WEIGHT_STRUCT") didn't
update the PERF_SAMPLE_WEIGHT_STRUCT sample type for perf script. For a
new kernel on x86, the check fails.
Use PERF_SAMPLE_WEIGHT_TYPE, which supports both sample types, to
replace PERF_SAMPLE_WEIGHT
Fixes: ea8d0ed6ea ("perf tools: Support PERF_SAMPLE_WEIGHT_STRUCT")
Reported-by: Joe Mario <jmario@redhat.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Joe Mario <jmario@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Joe Mario <jmario@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: https://lore.kernel.org/r/1632929894-102778-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Got following build fail on powerpc:
CC arch/powerpc/util/skip-callchain-idx.o
In function ‘check_return_reg’,
inlined from ‘check_return_addr’ at arch/powerpc/util/skip-callchain-idx.c:213:7,
inlined from ‘arch_skip_callchain_idx’ at arch/powerpc/util/skip-callchain-idx.c:265:7:
arch/powerpc/util/skip-callchain-idx.c:54:18: error: ‘dwarf_frame_register’ accessing 96 bytes \
in a region of size 64 [-Werror=stringop-overflow=]
54 | result = dwarf_frame_register(frame, ra_regno, ops_mem, &ops, &nops);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/util/skip-callchain-idx.c: In function ‘arch_skip_callchain_idx’:
arch/powerpc/util/skip-callchain-idx.c:54:18: note: referencing argument 3 of type ‘Dwarf_Op *’
In file included from /usr/include/elfutils/libdwfl.h:32,
from arch/powerpc/util/skip-callchain-idx.c:10:
/usr/include/elfutils/libdw.h:1069:12: note: in a call to function ‘dwarf_frame_register’
1069 | extern int dwarf_frame_register (Dwarf_Frame *frame, int regno,
| ^~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
The dwarf_frame_register args changed with [1],
Updating ops_mem accordingly.
[1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=5621fe5443da23112170235dd5cac161e5c75e65
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Mark Wieelard <mjw@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20210928195253.1267023-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf.data is not written cleanly, we would like to process existing
data as much as possible (please see f_header.data.size == 0 condition
in perf_session__read_header). However, perf.data with partial data may
crash perf. Specifically, we see crash in 'perf script' for NULL
session->header.env.arch.
Fix this by checking session->header.env.arch before using it to determine
native_arch. Also split the if condition so it is easier to read.
Committer notes:
If it is a pipe, we already assume is a native arch, so no need to check
session->header.env.arch.
Signed-off-by: Song Liu <songliubraving@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211004053238.514936-1-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull SCSI fixes from James Bottomley:
"Three small fixes, all in drivers, and one sizeable update to the UFS
driver to remove the HPB 2.0 feature that has been objected to by Jens
and Christoph.
Although the UFS patch is large and last minute, it's essentially the
least intrusive way of resolving the objections in time for the 5.15
release"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: ufshpb: Remove HPB2.0 flows
scsi: mpt3sas: Fix reference tag handling for WRITE_INSERT
scsi: ufs: ufs-exynos: Correct timeout value setting registers
scsi: ibmvfc: Fix up duplicate response detection
Pull clk fix from Stephen Boyd:
"One fix for the composite clk that broke when we changed this clk type
to use the determine_rate instead of round_rate clk op by default.
This caused lots of problems on Rockchip SoCs because they heavily use
the composite clk code to model the clk tree"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: composite: Also consider .determine_rate for rate + mux composites
Pull RISC-V fixes from Palmer Dabbelt:
"These are pretty late, but they do fix concrete issues.
- ensure the trap vector's address is aligned.
- avoid re-populating the KASAN shadow memory.
- allow kasan to build without warnings, which have recently become
errors"
* tag 'riscv-for-linus-5.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix asan-stack clang build
riscv: Do not re-populate shadow memory with kasan_populate_early_shadow
riscv: fix misalgned trap vector base address
The Host Performance Buffer feature allows UFS read commands to carry the
physical media addresses along with the LBAs, thus allowing less internal
L2P-table switches in the device. HPB1.0 allowed a single LBA, while
HPB2.0 increases this capacity up to 255 blocks.
Carrying more than a single record, the read operation is no longer purely
of type "read" but a "hybrid" command: Writing the physical address to the
device in one operation and reading back the required payload in another.
The JEDEC HPB spec defines two commands for this operation:
HPB-WRITE-BUFFER (0x2) to write the physical addresses to device, and
HPB-READ to read the payload.
With the current HPB design the UFS driver has no alternative but to divide
the READ request into 2 separate commands: HPB-WRITE-BUFFER and HPB-READ.
This causes a great deal of aggravation to the block layer guys who
demanded that we completely revert the entire HPB driver regardless of the
huge amount of corporate effort already invested in it.
As a compromise, remove only the pieces that implement the 2.0
specification. This is done as a matter of urgency for the final 5.15
release.
Link: https://lore.kernel.org/r/20211030062301.248-1-avri.altman@wdc.com
Tested-by: Avri Altman <avri.altman@wdc.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Co-developed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull powerpc fixes from Michael Ellerman:
"Three commits fixing some issues introduced with the recent IOMMU
changes we merged.
Thanks to Alexey Kardashevskiy"
* tag 'powerpc-5.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/iommu: Create huge DMA window if no MMIO32 is present
powerpc/pseries/iommu: Check if the default window in use before removing it
powerpc/pseries/iommu: Use correct vfree for it_map
Pull gpio fixes from Bartosz Golaszewski:
- fix the return value check when parsing the ngpios property in
gpio-xgs-iproc
- check the return value of bgpio_init() in gpio-mlxbf2
* tag 'gpio-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mlxbf2.c: Add check for bgpio_init failure
gpio: xgs-iproc: fix parsing of ngpios property
Testing revealed a problem with how the reference tag was handled for
a WRITE_INSERT operation. The SCSI_PROT_REF_CHECK flag is not set when
the controller is asked to generate the protection information
(i.e. not DIX). And as a result the initial reference tag would not be
set in the WRITE_INSERT case.
Separate handling of the REF_CHECK and REF_INCREMENT flags to align
with both the DIX spec and the MPI implementation.
Link: https://lore.kernel.org/r/20211028034202.24225-1-martin.petersen@oracle.com
Fixes: b3e2c72af1 ("scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI")
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull MMC fixes from Ulf Hansson:
- tmio: Re-enable card irqs after a reset
- mtk-sd: Fixup probing of cqhci for crypto
- cqhci: Fix support for suspend/resume
- vub300: Fix control-message timeouts
- dw_mmc-exynos: Fix support for tuning
- winbond: Silences build errors on M68K
- sdhci-esdhc-imx: Fix support for tuning
- sdhci-pci: Read card detect from ACPI for Intel Merrifield
- sdhci: Fix eMMC support for Thundercomm TurboX CM2290
* tag 'mmc-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: tmio: reenable card irqs after the reset callback
mmc: mediatek: Move cqhci init behind ungate clock
mmc: cqhci: clear HALT state after CQE enable
mmc: vub300: fix control-message timeouts
mmc: dw_mmc: exynos: fix the finding clock sample value
mmc: winbond: don't build on M68K
mmc: sdhci-esdhc-imx: clear the buffer_read_ready to reset standard tuning circuit
mmc: sdhci-pci: Read card detect from ACPI for Intel Merrifield
mmc: sdhci: Map more voltage level to SDHCI_POWER_330
Pull btrfs fixes from David Sterba:
"Last minute fixes for crash on 32bit architectures when compression is
in use. It's a regression introduced in 5.15-rc and I'd really like
not let this into the final release, fixes via stable trees would add
unnecessary delay.
The problem is on 32bit architectures with highmem enabled, the pages
for compression may need to be kmapped, while the patches removed that
as we don't use GFP_HIGHMEM allocations anymore. The pages that don't
come from local allocation still may be from highmem. Despite being on
32bit there's enough such ARM machines in use so it's not a marginal
issue.
I did full reverts of the patches one by one instead of a huge one.
There's one exception for the "lzo" revert as there was an
intermediate patch touching the same code to make it compatible with
subpage. I can't revert that one too, so the revert in lzo.c is
manual. Qu Wenruo has worked on that with me and verified the changes"
* tag 'for-5.15-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Revert "btrfs: compression: drop kmap/kunmap from lzo"
Revert "btrfs: compression: drop kmap/kunmap from zlib"
Revert "btrfs: compression: drop kmap/kunmap from zstd"
Revert "btrfs: compression: drop kmap/kunmap from generic helpers"
Pull tracing comment fixes from Steven Rostedt:
- Some bots have informed me that some of the ftrace functions
kernel-doc has formatting issues.
- Also, fix my snake instinct.
* tag 'trace-v5.15-rc6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix misspelling of "missing"
ftrace: Fix kernel-doc formatting issues
Pull crypto fix from Herbert Xu:
"Fix a build-time warning in x86/sm4"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: x86/sm4 - Fix invalid section entry size
Merge misc fixes from Andrew Morton:
"11 patches.
Subsystems affected by this patch series: mm (memcg, memory-failure,
oom-kill, secretmem, vmalloc, hugetlb, damon, and tools), and ocfs2"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
tools/testing/selftests/vm/split_huge_page_test.c: fix application of sizeof to pointer
mm/damon/core-test: fix wrong expectations for 'damon_split_regions_of()'
mm: khugepaged: skip huge page collapse for special files
mm, thp: bail out early in collapse_file for writeback page
mm/vmalloc: fix numa spreading for large hash tables
mm/secretmem: avoid letting secretmem_users drop to zero
ocfs2: fix race between searching chunks and release journal_head from buffer_head
mm/oom_kill.c: prevent a race between process_mrelease and exit_mmap
mm: filemap: check if THP has hwpoisoned subpage for PMD page fault
mm: hwpoison: remove the unnecessary THP check
memcg: page_alloc: skip bulk allocator for __GFP_ACCOUNT
Nathan reported that because KASAN_SHADOW_OFFSET was not defined in
Kconfig, it prevents asan-stack from getting disabled with clang even
when CONFIG_KASAN_STACK is disabled: fix this by defining the
corresponding config.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Fixes: 8ad8b72721 ("riscv: Add KASAN support")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
When calling this function, all the shadow memory is already populated
with kasan_early_shadow_pte which has PAGE_KERNEL protection.
kasan_populate_early_shadow write-protects the mapping of the range
of addresses passed in argument in zero_pte_populate, which actually
write-protects all the shadow memory mapping since kasan_early_shadow_pte
is used for all the shadow memory at this point. And then when using
memblock API to populate the shadow memory, the first write access to the
kernel stack triggers a trap. This becomes visible with the next commit
that contains a fix for asan-stack.
We already manually populate all the shadow memory in kasan_early_init
and we write-protect kasan_early_shadow_pte at the end of kasan_init
which makes the calls to kasan_populate_early_shadow superfluous so
we can remove them.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Fixes: e178d670f2 ("riscv/kasan: add KASAN_VMALLOC support")
Fixes: 8ad8b72721 ("riscv: Add KASAN support")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Some functions had kernel-doc that used a comma instead of a hash to
separate the function name from the one line description.
Also, the "ftrace_is_dead()" had an incomplete description.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
