Rather than trying to identify exactly which engines are available on
each platform in the IP descriptor, just include the list of all media
engines that the IP could theoretically support (i.e., 8 VCS + 4 VECS).
We still rely on the media fuse registers to tell us which specific
engine instances are actually present on a given platform, so there
shouldn't be any functional change. This will help prevent mistakes
with engine numbering (for example ambiguity about whether the 2nd VCS
engine on a platform with exactly two engines is numbered "VCS1" or
"VCS2") and will also future-proof the code a bit more in case new SKUs
or platform refreshes extend the engine list in the future.
Note that the media fuse register technically has an 8-bit field for
VECS engine presence starting on Xe2. However there's still no MMIO
register range reserved for VE engines above VECS3, so VE0-VE3 is still
consider the "maximum" VE engine mask that the driver can support for
now.
Bspec: 52614, 52615, 62567
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417152621.3357990-2-matthew.d.roper@intel.com
In the past, the noresume function was used by the GEM code to ensure
wakelocks were held and bump its usage. This is no longer the case
and this function was totally unused until it started to be used again
by display with commit 77e619a82f ("drm/i915/display: convert inner
wakeref get towards get_if_in_use")
However, on the display code, most of the callers are using the
raw wakeref, rather then the wakelock version. What caused a
major regression caught by CI.
Another option to this patch is to go with the original plan and
use the get_if_in_use variant in the display code, what is enough
to fulfil our needs. Then, an extra patch to delete the unused
_noresume variant.
v2: Keep grabbing wakelock but only assert for wakeref. (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 77e619a82f ("drm/i915/display: convert inner wakeref get towards get_if_in_use")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10875
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240418223756.68427-1-rodrigo.vivi@intel.com
When both hwmon and hwmon drvdata (on which hwmon depends) are device
managed resources, the expectation, on device unbind, is that hwmon will be
released before drvdata. However, in i915 there are two separate code
paths, which both release either drvdata or hwmon and either can be
released before the other. These code paths (for device unbind) are as
follows (see also the bug referenced below):
Call Trace:
release_nodes+0x11/0x70
devres_release_group+0xb2/0x110
component_unbind_all+0x8d/0xa0
component_del+0xa5/0x140
intel_pxp_tee_component_fini+0x29/0x40 [i915]
intel_pxp_fini+0x33/0x80 [i915]
i915_driver_remove+0x4c/0x120 [i915]
i915_pci_remove+0x19/0x30 [i915]
pci_device_remove+0x32/0xa0
device_release_driver_internal+0x19c/0x200
unbind_store+0x9c/0xb0
and
Call Trace:
release_nodes+0x11/0x70
devres_release_all+0x8a/0xc0
device_unbind_cleanup+0x9/0x70
device_release_driver_internal+0x1c1/0x200
unbind_store+0x9c/0xb0
This means that in i915, if use devm, we cannot gurantee that hwmon will
always be released before drvdata. Which means that we have a uaf if hwmon
sysfs is accessed when drvdata has been released but hwmon hasn't.
The only way out of this seems to be do get rid of devm_ and release/free
everything explicitly during device unbind.
v2: Change commit message and other minor code changes
v3: Cleanup from i915_hwmon_register on error (Armin Wolf)
v4: Eliminate potential static analyzer warning (Rodrigo)
Eliminate fetch_and_zero (Jani)
v5: Restore previous logic for ddat_gt->hwmon_dev error return (Andi)
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10366
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417145646.793223-1-ashutosh.dixit@intel.com
Any kunit doing any memory access should get their own runtime_pm
outer references since they don't use the standard driver API
entries. In special this dma_buf from the same driver.
Found by pre-merge CI on adding WARN calls for unprotected
inner callers:
<6> [318.639739] # xe_dma_buf_kunit: running xe_test_dmabuf_import_same_driver
<4> [318.639957] ------------[ cut here ]------------
<4> [318.639967] xe 0000:4d:00.0: Missing outer runtime PM protection
<4> [318.640049] WARNING: CPU: 117 PID: 3832 at drivers/gpu/drm/xe/xe_pm.c:533 xe_pm_runtime_get_noresume+0x48/0x60 [xe]
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-10-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
xe_pm_init is the very last thing during the xe_pci_probe(),
hence these protections are useless from the point of view
of ensuring that the device is awake.
Let's remove it so we continue towards the goal of killing
xe_device_mem_access.
v2: Adding more cases
v3: Provide a separate fix for xe_tile_init_noalloc return (Matt)
Adding a new case where display HDCP init calls which
are also called at display probe time.
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-5-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The mem_access itself is not holding any lock, but attempting
to train lockdep with possible scarring locks happening during
runtime pm. We are going soon to kill the mem_access get and put
helpers in favor of direct xe_pm_runtime calls, so let's just
move this lock around to where it now belongs.
v2: s/lockdep_training/lockdep_prime (Matt Auld)
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-4-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This patch brings no functional change. Since at this point of
the code we are already asserting a wakeref was held, it means
that we are with runtime_pm 'in_use' and in practical terms we
are only bumping the pm_runtime usage counter and moving on.
However, xe driver has a lockdep annotation that warned us that
if a sync resume was actually called at this point, we could have
a deadlock because we are inside the power_domains->lock locked
area and the resume would call the irq_reset, which would also
try to get the power_domains->lock.
For this reason, let's convert this call to a safer option and
calm lockdep on.
v2: use _noresume variant instead of get_in_use (Ville, Imre)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-3-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Let's ensure that we have an option for inner callers that will
raise WARN if device is not active and not protected by outer callers.
Make this also a void function forcing every caller to unconditionally
put the reference back afterwards.
This will be very important for cases where we want to hold the
reference before scheduling a work in a queue. Then the work job
will be responsible for putting it back.
While at this, already convert a case from mem_access_get_ongoing where
it is not checking for the reference and put it back, what would
cause the underflow.
v2: Fix identation.
v3: Convert equivalent missing put from mem_access towards pm_runtime.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
ACPI_WMI is a subitem of X86_PLATFORM_DEVICES. And X86_PLATFORM_DEVICES
is not selected in the current Kconfig, and may cause Kconfig warnings:
WARNING: unmet direct dependencies detected for ACPI_WMI
Depends on [n]: X86_PLATFORM_DEVICES [=n] && ACPI [=y]
Selected by [m]:
- DRM_XE [=m] && HAS_IOMEM [=y] && DRM [=m] && PCI [=y] && MMU [=y] &&
(m && MODULES [=y] || y && KUNIT [=y]=y) && X86 [=y] && ACPI [=y]
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415025215.15811-1-yaolu@kylinos.cn
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
To run correctly, each Virtual Function must be provisioned with
some chunk of shared hardware or firmware resources (like GGTT,
device memory, GuC doorbell IDs, GuC context IDs) and scheduling
parameters (execution quantum or preemption timeout).
All resources assigned to VFs must be excluded from the PF driver
use and may require some additional preparation steps (like setup
of the LMTT or update of the GGTT PTE). Those provisioning details
must be then sent to the GuC firmware as most of those details
will be shared later with the VF drivers during their boot.
Add basic functions to provision VFs with all hardware resources
or scheduling parameters. We will use them shortly in upcoming
patches either in manual provisioning over debugfs, exposed to the
advanced users, or automatic provisioning done by PF driver during
VFs enabling.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415173937.1287-7-michal.wajdeczko@intel.com
The PF driver must maintain additional GT level data per each VF.
This additional per-VF data will be added in upcoming patches and
will include: provisioning configuration (like GGTT space or LMEM
allocation sizes or scheduling parameters), monitoring thresholds
and counters, and more.
As number of supported VFs varies across platforms use flexible
array where first entry will contain metadata for the PF itself
(if such configuration parameter is applicable for the PF) and
all remaining entries will contain data for potential VFs.
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415173937.1287-6-michal.wajdeczko@intel.com
VF's drivers can't modify GGTT PTEs except the range explicitly
assigned by the PF driver. To allow hardware enforcement of this
requirement, each GGTT PTE has a field with the VF number that
identifies which VF can modify that particular GGTT PTE entry.
Only PF driver can modify this field and PF driver shall do that
before VF drivers will be loaded. Add function to prepare PTEs.
Since it will be used only by the PF driver, make it available
only for CONFIG_PCI_IOV=y.
Bspec: 45015, 52395
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415173937.1287-3-michal.wajdeczko@intel.com
Generate the mask of enabled L3 banks for the GT. It is stored with the
rest of the GT topology in a consistent representation across platforms.
For now the L3 bank mask is just printed in the log for developers to
easily figure out the fusing characteristics of machines that they are
trying to debug issues on. Later it can be used to replace existing code
in the driver that requires the L3 bank count (not mask). Also the mask
can easily be exposed to user space in a new query if needed.
v2: Better naming of variable and function (Matt Roper)
Bspec: 52545, 52546, 62482
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410123723.7-2-francois.dugast@intel.com
This is an effort to unify hmmptr (aka system allocator)
and userptr code. hmm_range_fault is used to populate
a virtual address range for both hmmptr and userptr,
instead of hmmptr using hmm_range_fault and userptr
using get_user_pages_fast.
This also aligns with AMD gpu driver's behavior. In
long term, we plan to put some common helpers in this
area to drm layer so it can be re-used by different
vendors.
-v1
use the function with parameter to confirm whether lock is
acquired by the caller or needs to be acquired in hmm_range_fault.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Oak Zeng <oak.zeng@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412095237.1048599-3-himal.prasad.ghimiray@intel.com
Introduce a helper function xe_userptr_populate_range to populate
a userptr range. This functions calls hmm_range_fault to read
CPU page tables and populate all pfns/pages of this virtual address
range. For system memory page, dma-mapping is performed
to get a dma-address which can be used later for GPU to access pages.
v1: Address review comments:
separate a npage_in_range function (Matt)
reparameterize function xe_userptr_populate_range function (Matt)
move mmu_interval_read_begin() call into while loop (Thomas)
s/mark_range_accessed/xe_mark_range_accessed (Thomas)
use set_page_dirty_lock (vs set_page_dirty) (Thomas)
move a few checking in xe_vma_userptr_pin_pages to hmm.c (Matt)
v2: Remove device private page support. Only support system
pages for now. use dma-map-sg rather than dma-map-page (Matt/Thomas)
v3: Address review comments:
Squash patch "drm/xe: Introduce a helper to free sg table" to current
patch (Matt)
start and end addresses are already page aligned (Matt)
Do mmap_read_lock and mmap_read_unlock for hmm_range_fault incase of
non system allocator call. (Matt)
Drop kthread_use_mm and kthread_unuse_mm. (Matt)
No need of kernel-doc for static functions.(Matt)
Modify function names. (Matt)
Free sgtable incase of dma_map_sgtable failure.(Matt)
Modify loop for hmm_range_fault.(Matt)
v4: Remove the dummy function for xe_hmm_userptr_populate_range
since CONFIG_HMM_MIRROR is needed. (Matt)
Change variable names start/end to userptr_start/userptr_end.(Matt)
v5: Remove device private page support info from commit message. Since
the patch doesn't support device page handling. (Thomas)
Signed-off-by: Oak Zeng <oak.zeng@intel.com>
Co-developed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Cc: Brian Welty <brian.welty@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412095237.1048599-2-himal.prasad.ghimiray@intel.com
A recent change added a use of xe_wa_oob.h without adding the file that
uses it to uses_generated_oob, which means xe_wa_oob.h does not get
properly generated before attempting to build the object file:
LINK resolve_btfids
CC [M] drivers/gpu/drm/xe/xe_guc_ads.o
drivers/gpu/drm/xe/xe_guc_ads.c:10:10: fatal error: generated/xe_wa_oob.h: No such file or directory
10 | #include <generated/xe_wa_oob.h>
| ^~~~~~~~~~~~~~~~~~~~~~~
After adding '$(obj)/xe_guc_ads.o' to uses_generated_oob, xe_wa_oob.h is
always generated before building the file, resulting in no errors:
LINK resolve_btfids
HOSTCC drivers/gpu/drm/xe/xe_gen_wa_oob
GEN xe_wa_oob.c xe_wa_oob.h
CC [M] drivers/gpu/drm/xe/xe_guc_ads.o
Fixes: c151ff5c90 ("drm/xe/lnl: Enable GuC Wa_14019882105")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410-drm-xe-fix-xe_guc_ads-using-xe_wa_oob-v1-1-441f2d8e5d83@kernel.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
