This patch simplifying the handling of modeset locks and atomic state
for an atomic commit is based on
https://lore.kernel.org/all/20210715184954.7794-2-ville.syrjala@linux.intel.com/
adding the helper to i915. I find this approach preferrable than
open-coding the corresponding steps (fixed for me an atomic
state reset during a DEADLK retry, which I missed in the open-coded
version) and also better than the existing
DRM_MODESET_LOCK_ALL_BEGIN/END macros for the reasons described in the
above original patchset.
This change takes the helper into use only for atomic commits during DDI
hotplug handling, as a preparation for a follow-up patch adding a
similar commit started from the same spot. Other places doing a
driver-internal atomic commit is to be converted by a follow-up
patchset.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230510103131.1618266-13-imre.deak@intel.com
During HW readout/sanitization CRTCs can be disabled only if they don't
have an attached encoder (and so the encoder disable hooks don't need to
be called). An upcoming patch will need to disable CRTCs also with an
attached encoder, so add support for this.
For bigjoiner configs the encoder disabling hooks require the slave CRTC
states, so add these too to the atomic state. Since the connector atomic
state is already up-to-date when the CRTC is disabled the connector
state needs to be updated (reset) after the CRTC is disabled, make this
so. Follow the proper order of disabling first all bigjoiner slaves,
then any port synced CRTC slaves followed by the CRTC originally
requested to be disabled.
v2:
- Fix calculating the bigjoiner_masters mask in a port sync config,
(Ville)
- Keep _noatomic suffix in intel_crtc_disable_noatomic(). (Ville)
- Rebase on full CRTC state reset in this patchset, not requiring
resetting the bigjoiner state separately and (instead) resetting
the full atomic CRTC and related global state after all linked
pipes got disabled.
- Disable portsync slaves before a portsync master.
- Disable a portsync master if a linked portsync slave is disabled.
v3: (Ville)
- Use s/u32/u8 for transcoder and pipe masks.
- Use is_power_of_2() instead of hweight()==1.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230510103131.1618266-8-imre.deak@intel.com
During HW state readout/sanitization an up-to-date connector atomic
state will be required by a follow-up patch, which can disable CRTCs
with an encoder (and calling the correct encoder hooks happens via the
connector atomic state encoder pointer). So update the connector state
already before the CRTC sanitize/disable step. For now this doesn't make
a difference, since intel_modeset_update_connector_atomic_state() will
update/enable the atomic state only for connectors that have an enabled
encoder/CRTC. Such CRTCs/encoders will not be affected by
intel_sanitize_crtc().
v2: Add comment about why the connector state needs to be up-to-date.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230510103131.1618266-5-imre.deak@intel.com
Make sure that the CRTC state is reset correctly, as expected after
disabling the CRTC.
In particular this change will:
- Zero all the CSC blob pointers after intel_crtc_free_hw_state()
has freed them.
- Zero the shared DPLL and port PLL pointers and clear the
corresponding CRTC reference flag in the PLL state.
- Reset all the transcoder and pipe fields.
v2:
- Reset fully the CRTC state. (Ville)
- Clear pipe active flags in the DPLL state.
v3:
- Clear only the CRTC reference flag and add a helper for this.
(Ville)
v4:
- Rebased on previous patch, adding
intel_unreference_shared_dpll_crtc() separately. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230510103131.1618266-4-imre.deak@intel.com
For a bigjoiner configuration display->crtc_disable() will be called
first for the slave CRTCs and then for the master CRTC. However slave
CRTCs will be actually disabled only after the master CRTC is disabled
(from the encoder disable hooks called with the master CRTC state).
Hence the slave PIPEDMCs can be disabled only after the master CRTC is
disabled, make this so.
intel_encoders_post_pll_disable() must be called only for the master
CRTC, as for the other two encoder disable hooks. While at it fix this
up as well. This didn't cause a problem, since
intel_encoders_post_pll_disable() will call the corresponding hook only
for an encoder/connector connected to the given CRTC, however slave
CRTCs will have no associated encoder/connector.
Fixes: 3af2ff0840 ("drm/i915: Enable a PIPEDMC whenever its corresponding pipe is enabled")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230510103131.1618266-2-imre.deak@intel.com
Since topology state is being added to drm_atomic_state now all
drm_modeset_lock required are being taken from core. This raises
an issue when we try to loop over connector and assign vcpi id to
our streams as we did not have atomic state to derive acquire_ctx
from. We fill in stream info if dpmst encoder is found before
enabling hdcp. intel_hdcp_required_stream will be broken which
will only set the content type.
--v2
-move prepare streams to beginning of intel_hdcp_enable to avoid
checking of mst encoder twice [Ankit]
--v3
-break intel_required_content_stream to two part and set the stream_id
at the beginning [Ankit]
--v4
-change return types for intel_hdcp_prepare_stream and
intel_hdcp_required content_stream [Ankit]
-rename intel_hdcp_set_content_stream to
intel_hdcp_set_stream [Ankit]
-place intel_hdcp_set_streams above caller [Ankit]
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515103225.688830-4-suraj.kandpal@intel.com
The big switch+if statement mess in map_aux_ch() is
illegible. Split up into cleaner per-platform arrays
like we already have for the gmbus pins.
We use enum aux_ch as the index and the VBT thing as
the value. Slightly non-intuitive perhaps but if we
did it the other way around we'd have problems with
AUX_CH_A being zero, and thus any non-populated
element would look like AUX_CH_A.
v2: flip the index vs. value around
TODO: Didn't bother with the platform variants beyond the
ones that really need remapping, which means if the
VBT is bogus we end up with a nonexistent aux ch.
Might be nice to check this a bit better.
Yet another bitmask in device info?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230509160206.25971-1-ville.syrjala@linux.intel.com
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
On g4x the hardware has only one audio/video DIP block. Thus
only one HDMI port can transmit audio/infoframes at a time.
Currently we pretend that multiple ports can do it at the same
time, but that doesn't actually work for two reasons:
- the state of the single hw block will get clobbered by
the multiple ports, leading to state checker failures
- the hardware will automagically disable audio/infoframe
transmission when enabled on multiple ports
To fix this let's allow only one of the ports to transmit
audio/infoframes at a time. We'll just go over all the HDMI
ports and pick the first one that is otherwise capable of
audio/infoframes. Further HDMI ports will be treated as if
they had a DVI sink connected.
In order to compute this consistently we'll also need to
always add all HDMI ports to the atomic state.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107194604.15227-6-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
The decision to use DFP output format conversion capabilities should be
during compute_config phase.
This patch uses the members of intel_dp->dfp to only store the
format conversion capabilities of the DP device and uses the crtc_state
sink_format member, to program the protocol-converter for
colorspace/format conversion.
v2: Use sink_format to determine the color conversion config for the
pcon (Ville).
v3: Fix typo: missing 'break' in switch case (lkp kernel test robot).
v4: Add helper to check if DP supports YCBCR420.
v5: Simplify logic for computing output_format, based on the given
sink_format. (Ville).
Added scaler constraint for YCbCr420 output.
v6: Split the patch for Scaler constraint for Ycbcr420.
v7: Simplify the policy for selecting output_format:
Always try for RGB first, followed by YCBCR444, and finally by YCBCR420.
v8: Removed redundant comments, minor refactoring. (Ville)
v9: Added member for ycbcr420 passthrough cap, fixed minor issues. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427125605.487769-3-ankit.k.nautiyal@intel.com
The decision to use DFP output format conversion capabilities should be
during compute_config phase.
This patch adds new member to crtc_state to represent the final
output_format to the sink. In case of a DFP this can be different than
the output_format, as per the format conversion done via the PCON.
This will help to store only the format conversion capabilities of the
DP device in intel_dp->dfp, and use crtc_state to compute and store the
configuration for color/format conversion for a given mode.
v2: modified the new member to crtc_state to represent the final
output_format that eaches the sink, after possible conversion by
PCON kind of devices. (Ville)
v3: Addressed comments from Ville:
-Added comments to clarify difference between sink_format and
output_format.
-Corrected the order of setting sink_format and output_format.
-Added readout for sink_format in get_pipe_config hooks.
v4: Set sink_format for intel_sdvo too. (Ville)
v5: Rebased.
v6: Fixed condition to go for YCbCr420 format for dp and hdmi. (Ville)
v7: Fix the condition to set sink_format for HDMI.
Set hdmi output_format simply as sink_format. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v3)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427125605.487769-2-ankit.k.nautiyal@intel.com
drm_dp_dsc_sink_max_slice_count() may return 0 if something goes
wrong on the part of the DSC sink and its DPCD register. This null
value may be later used as a divisor in intel_dsc_compute_params(),
which will lead to an error.
In the unlikely event that this issue occurs, fix it by testing the
return value of drm_dp_dsc_sink_max_slice_count() against zero.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: a4a157777c ("drm/i915/dp: Compute DSC pipe config in atomic check")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418140430.69902-1-n.zhandarovich@fintech.ru
intel_atomic_get_new_crtc_state can return NULL, unless crtc state wasn't
obtained previously with intel_atomic_get_crtc_state, so we must check it
for NULLness here, just as in many other places, where we can't guarantee
that intel_atomic_get_crtc_state was called.
We are currently getting NULL ptr deref because of that, so this fix was
confirmed to help.
Fixes: 74a75dc908 ("drm/i915/display: move plane prepare/cleanup to intel_atomic_plane.c")
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230505082212.27089-1-stanislav.lisovskiy@intel.com
Display to communicate display pipe count/CDCLK/voltage configuration
to Pcode for more accurate power accounting for DG2.
Existing sequence is only sending the voltage value to the Pcode.
Adding new sequence with current cdclk associate with voltage value masking.
Adding pcode request when any pipe power well will disable or enable.
v2: - Make intel_cdclk_need_serialize static to make CI compiler happy.
v3: - Removed redundant return(Jani Nikula)
- Changed intel_cdclk_power_usage_to_pcode_(pre|post)_notification to be
static and also naming to intel_cdclk_pcode_(pre|post)_notify(Jani Nikula)
- Changed u8 to be u16 for cdclk parameter in intel_pcode_notify function,
as according to BSpec it requires 10 bits(Jani Nikula)
- Replaced dev_priv's with i915's(Jani Nikula)
- Simplified expression in intel_cdclk_need_serialize(Jani Nikula)
- Removed redundant kernel-doc and indentation(Jani Nikula)
v4: - Fixed some checkpatch warnings
v5: - According to HW team comments that change should affect only DG2,
fix correspodent platform check to account this.
v6: - Added one more missing IS_DG2 check(Vinod Govindapillai)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504093959.12085-1-stanislav.lisovskiy@intel.com
Define and use the bitmasks for the x/y components
of the skl+ scaler window pos/size registers.
We stick to the full 16 bits mask here even though the
hardware limits are actually lower. The current (ADL)
hardware maximums are in fact: 14 bits for X size, 13 bits
for X pos, 13 bits for Y size/pos. Yes, that is correct,
X pos has less bits than the X size for some reason. But
that doesn't actually matter for now as we don't currently
even support such wide displays without the use of bigjoiner
(due to max plane width limit).
v2: Switch back to full 16bit masks since that's what
we use transcoder timign regs and PIPESRC as well
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230426135019.7603-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
