This adds support for stolen memory, with the same allocator as
vram_mgr. This allows us to skip a whole lot of copy-paste,
by re-using parts of xe_ttm_vram_mgr.
The stolen memory may be bound using VM_BIND, so it performs like any
other memory region.
We should be able to map a stolen BO directly using the physical memory
location instead of through GGTT even on old platforms, but I don't know
what the effects are on coherency.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When a job is inflight we may access memory to read the hardware seqno.
All user jobs have VM open which has a ref but kernel jobs do not
require VM so it is possible to not have memory ref. To avoid this, take
a memory ref on kernel job creation.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Expand xe_mmio_wait32 to accept atomic and then use
that directly when possible, and create own routine to
wait for the pcode status.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
We don't need any macro for a simple check we can do explicitly
and clear.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
To make it simpler, all of the status checks also waits and
times out.
Also, no ktime precision is needed in this case, and we
can use usleep_range because we are not in atomic paths here.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Rather than a constant check on proto and wait not busy,
let's wait for the expected success and then check the
protocol afterwards.
With this, we can now use the regular xe_mmio_wait32
and kill this local need for the wait_for.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Possible now that the wait function returns the last read value.
So we can remove the users of i915's wait_for one by one...
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
This is already useful because it avoids some extra reads
where registers might have changed after the timeout decision.
But also, it will be important to end the kill of i915's wait_for.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Then, move the i915_utils.h include to its user.
The overall goal is to kill all the usages of the i915_utils
stuff.
Yes, wait_for also depends on <linux/delay.h>, so they go
together to where it is needed. It will be likely needed
anyway directly for udelay or usleep_range.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms starting with Tiger Lake (first Intel Xe Architecture).
The code is at a stage where it is already functional and has experimental
support for multiple platforms starting from Tiger Lake, with initial
support implemented in Mesa (for Iris and Anv, our OpenGL and Vulkan
drivers), as well as in NEO (for OpenCL and Level0).
The new Xe driver leverages a lot from i915.
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there. But it is not added
in this patch.
This initial work is a collaboration of many people and unfortunately
the big squashed patch won't fully honor the proper credits. But let's
get some git quick stats so we can at least try to preserve some of the
credits:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Matthew Auld <matthew.auld@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Co-developed-by: Francois Dugast <francois.dugast@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Philippe Lecluse <philippe.lecluse@intel.com>
Co-developed-by: Nirmoy Das <nirmoy.das@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: José Roberto de Souza <jose.souza@intel.com>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Co-developed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Co-developed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
drm-misc-next for 6.8:
UAPI Changes:
- Remove Userspace Mode-Setting ioctls
- v3d: New uapi to handle jobs involving the CPU
Cross-subsystem Changes:
Core Changes:
- atomic: Add support for FB-less planes which got reverted a bit
later for lack of IGT tests and userspace code, Dump private objects
state in drm_state_dump.
- dma-buf: Add fence deadline support
- encoder: Create per-encoder debugfs directory, move the bridge chain
file to that directory
Driver Changes:
- Include drm_auth.h in driver that use it but don't include it, Drop
drm_plane_helper.h from drivers that include it but don't use it
- imagination: Plenty of small fixes
- panfrost: Improve interrupt handling at poweroff
- qaic: Convert to persistent DRM devices
- tidss: Support for the AM62A7, a few probe improvements, some cleanups
- v3d: Support for jobs involving the CPU
- bridge:
- Create transparent aux-bridge for DP/USB-C
- lt8912b: Add suspend/resume support and power regulator support
- panel:
- himax-hx8394: Drop prepare, unprepare and shutdown logic, Support
panel rotation
- New panels: BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G,
Evervision VGG644804, SDC ATNA45AF01
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/yu5heqaufyeo4nlowzieu4s5unwqrqyx4jixbfjmzdon677rpk@t53vceua2dao
- Improve display debug msgs and other general clean-ups (Ville, Rahuul)
- PSR fixes and improvements around selective fetch (Jouni, Ville)
- Remove FBC restrictions for Xe2LPD displays (Vinod)
- Skip some timing checks on BXT/GLK DSI transcoders (Ville)
- DP MST Fixes (Ville)
- Correct the input parameter on _intel_dsb_commit (heminhong)
- Fix IP version of the display WAs (Bala)
- DGFX uses direct VBT pin mapping (Clint)
- Proper handling of bool on PIPE_CONF_CHECK macros (Jani)
- Skip state verification with TBT-ALT mod (Mika Kahona)
- General organization of display code for reusage with Xe
(Jouni, Luca, Jani, Maarten)
- Squelch a sparse warning (Jani)
- Don't use "proxy" headers (Andy Shevchenko)
- Use devm_gpiod_get() for all GPIOs (Hans)
- Fix ADL+ tiled plane stride (Ville)
- Use octal permissions in display debugfs (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZXIWG6bRYaUw0w6-@intel.com
The uncore code may not always be available (e.g. when we build the
display code with Xe), so we can't always rely on having the uncore's
spinlock.
To handle this, split the spin_lock/unlock_irqsave/restore() into
spin_lock/unlock() followed by a call to local_irq_save/restore() and
create wrapper functions for locking and unlocking the uncore's
spinlock. In these functions, we have a condition check and only
actually try to lock/unlock the spinlock when I915 is defined, and
thus uncore is available.
This keeps the ifdefs contained in these new functions and all such
logic inside the display code.
Cc: Tvrtko Ursulin <tvrto.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201100032.1367589-1-luciano.coelho@intel.com
It's been reported that DSI host driver's detach can be called without
the attach ever happening:
https://lore.kernel.org/all/20230412073954.20601-1-tony@atomide.com/
After reading the code, I think this is what happens:
We have a DSI host defined in the device tree and a DSI peripheral under
that host (i.e. an i2c device using the DSI as data bus doesn't exhibit
this behavior).
The host driver calls mipi_dsi_host_register(), which causes (via a few
functions) mipi_dsi_device_add() to be called for the DSI peripheral. So
now we have a DSI device under the host, but attach hasn't been called.
Normally the probing of the devices continues, and eventually the DSI
peripheral's driver will call mipi_dsi_attach(), attaching the
peripheral.
However, if the host driver's probe encounters an error after calling
mipi_dsi_host_register(), and before the peripheral has called
mipi_dsi_attach(), the host driver will do cleanups and return an error
from its probe function. The cleanups include calling
mipi_dsi_host_unregister().
mipi_dsi_host_unregister() will call two functions for all its DSI
peripheral devices: mipi_dsi_detach() and mipi_dsi_device_unregister().
The latter makes sense, as the device exists, but the former may be
wrong as attach has not necessarily been done.
To fix this, track the attached state of the peripheral, and only detach
from mipi_dsi_host_unregister() if the peripheral was attached.
Note that I have only tested this with a board with an i2c DSI
peripheral, not with a "pure" DSI peripheral.
However, slightly related, the unregister machinery still seems broken.
E.g. if the DSI host driver is unbound, it'll detach and unregister the
DSI peripherals. After that, when the DSI peripheral driver unbound
it'll call detach either directly or using the devm variant, leading to
a crash. And probably the driver will crash if it happens, for some
reason, to try to send a message via the DSI bus.
But that's another topic.
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921-dsi-detach-fix-v1-1-d0de2d1621d9@ideasonboard.com
The i2c_master_send/recv() functions return negative error codes or
they return "len" on success. So the error handling here can be written
as just normal checks for "if (ret < 0) return ret;". No need to
complicate things.
Btw, in this code the "len" parameter can never be zero, but even if
it were, then I feel like this would still be the best way to write it.
Fixes: 9144379928 ("drm/bridge: nxp-ptn3460: fix i2c_master_send() error checking")
Suggested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/04242630-42d8-4920-8c67-24ac9db6b3c9@moroto.mountain
This function is only used when debugfs is enabled, and otherwise
causes a build warning:
drivers/gpu/drm/imagination/pvr_fw_trace.c:135:1: error: 'update_logtype' defined but not used [-Werror=unused-function]
Move the #ifdef check to include this function as well.
Fixes: cb56cd6108 ("drm/imagination: Add firmware trace to debugfs")
Acked-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231204073231.1164163-1-arnd@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
DRM drivers with user-space mode setting have been removed in Linux
v6.3. [1] Now remove the ioctl entry points for these drivers. Invoking
any of the ioctl ops will unconditionally return -EINVAL to user space.
Invoking DRM_IOCTL_MODESET_CTL is different from the other legacy
ioctl ops as it returns 0 even without CONFIG_DRM_LEGACY set. From the
original commit 29935554b3 ("drm: Disallow DRM_IOCTL_MODESET_CTL for
KMS drivers") it is not apparent how or why the operation differs from
the others. It is likely just an oversight in commit 61ae227032
("drm: allow removal of legacy codepaths (v4.1)"), which allowed
disabling leagacy ioctls in the first place. Still keep this removal
separate from the other ioctls to allow an easy revert, if necessary.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/series/111602/ # [1]
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-10-tzimmermann@suse.de
