Add a new module for common handling of Admin Queue related logic.
Start by a helper for error to string conversion. This lives inside
libie/, but is a separate module what follows our logic of splitting
into topical modules, to avoid pulling in not needed stuff, and have
better organization in general.
Olek suggested how to better solve the error to string conversion.
It will be used in follow-up patches in ice, i40e and iavf.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use libie_aq_desc instead of i40e_aq_desc. Do needed changes to allow
clean build.
Get version descriptor is a little less detailed on i40e. To not mess up
with shifting or union inside libie desc use get version descriptor from
i40e.
Move additional caps for i40e to libie.
Fix RCT in declaration that is using libie_aq_desc;
Use libie_aq_raw() wherever it can be used.
The libie aq error is extended, cover it in ice driver just to clean
build. In next patches the libie code for that will be used in each
of intel driver.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The descriptor structure is the same in ice, ixgbe and i40e. Move it to
common libie header to use it across different driver.
Leave device specific adminq commands in separate folders. This lead to
a change that need to be done in filling/getting descriptor:
- previous: struct specific_desc *cmd;
cmd = &desc.params.specific_desc;
- now: struct specific_desc *cmd;
cmd = libie_aq_raw(&desc);
Do this changes across the driver to allow clean build. The casting only
have to be done in case of specific descriptors, for generic one union
can still be used.
Changes beside code moving:
- change ICE_ prefix to LIBIE_ prefix (ice_ and libie_ too)
- remove shift variables not otherwise needed (in libie_aq_flags)
- fill/get descriptor data based on desc.params.raw whenever the
descriptor isn't defined in libie
- move defines from the libie_aq_sth structure outside
- add libie_aq_raw helper and use it instead of explicit casting
Reviewed by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2025-07-23
1) Optimize to hold device only for the asynchronous decryption,
where it is really needed.
From Jianbo Liu.
2) Align our inbund SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup.
From Aakash Kumar S.
3) Skip redundant statistics update for xfrm crypto offload.
From Jianbo Liu.
Please pull or let me know if there are problems.
* tag 'ipsec-next-2025-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: Skip redundant statistics update for crypto offload
xfrm: Duplicate SPI Handling
xfrm: hold device only for the asynchronous decryption
====================
Link: https://patch.msgid.link/20250723080402.3439619-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Chia-Yu Chang says:
====================
DUALPI2 patch
This patch serise adds DualPI Improved with a Square (DualPI2) with
following features:
* Supports congestion controls that comply with the Prague requirements
in RFC9331 (e.g. TCP-Prague)
* Coupled dual-queue that separates the L4S traffic in a low latency
queue (L-queue), without harming remaining traffic that is scheduled
in classic queue (C-queue) due to congestion-coupling using PI2
as defined in RFC9332
* Configurable overload strategies
* Use of sojourn time to reliably estimate queue delay
* Supports ECN L4S-identifier (IP.ECN==0b*1) to classify traffic into
respective queues
For more details of DualPI2, please refer IETF RFC9332
(https://datatracker.ietf.org/doc/html/rfc9332).
====================
Link: https://patch.msgid.link/20250722095915.24485-1-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update configuration of tc-tests and preload DualPI2 module for self-tests,
and add following self-test cases for DualPI2:
Test a4c7: Create DualPI2 with default setting
Test 1ea4: Create DualPI2 with memlimit
Test 2130: Create DualPI2 with typical_rtt and max_rtt
Test 90c1: Create DualPI2 with max_rtt
Test 7b3c: Create DualPI2 with any_ect option
Test 49a3: Create DualPI2 with overflow option
Test d0a1: Create DualPI2 with drop_enqueue option
Test f051: Create DualPI2 with no_split_gso option
Test 456b: Create DualPI2 with packet step_thresh
Test 610c: Create DualPI2 with packet min_qlen_step
Test b4fa: Create DualPI2 with packet coupling_factor
Test 37f1: Create DualPI2 with packet classic_protection
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250722095915.24485-6-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DualPI2 provides L4S-type low latency & loss to traffic that uses a
scalable congestion controller (e.g. TCP-Prague, DCTCP) without
degrading the performance of 'classic' traffic (e.g. Reno,
Cubic etc.). It is to be the reference implementation of IETF RFC9332
DualQ Coupled AQM (https://datatracker.ietf.org/doc/html/rfc9332).
Note that creating two independent queues cannot meet the goal of
DualPI2 mentioned in RFC9332: "...to preserve fairness between
ECN-capable and non-ECN-capable traffic." Further, it could even
lead to starvation of Classic traffic, which is also inconsistent
with the requirements in RFC9332: "...although priority MUST be
bounded in order not to starve Classic traffic." DualPI2 is
designed to maintain approximate per-flow fairness on L-queue and
C-queue by forming a single qdisc using the coupling factor and
scheduler between two queues.
The qdisc provides two queues called low latency and classic. It
classifies packets based on the ECN field in the IP headers. By
default it directs non-ECN and ECT(0) into the classic queue and
ECT(1) and CE into the low latency queue, as per the IETF spec.
Each queue runs its own AQM:
* The classic AQM is called PI2, which is similar to the PIE AQM but
more responsive and simpler. Classic traffic requires a decent
target queue (default 15ms for Internet deployment) to fully
utilize the link and to avoid high drop rates.
* The low latency AQM is, by default, a very shallow ECN marking
threshold (1ms) similar to that used for DCTCP.
The DualQ isolates the low queuing delay of the Low Latency queue
from the larger delay of the 'Classic' queue. However, from a
bandwidth perspective, flows in either queue will share out the link
capacity as if there was just a single queue. This bandwidth pooling
effect is achieved by coupling together the drop and ECN-marking
probabilities of the two AQMs.
The PI2 AQM has two main parameters in addition to its target delay.
The integral gain factor alpha is used to slowly correct any persistent
standing queue error from the target delay, while the proportional gain
factor beta is used to quickly compensate for queue changes (growth or
shrinkage). Either alpha and beta are given as a parameter, or they can
be calculated by tc from alternative typical and maximum RTT parameters.
Internally, the output of a linear Proportional Integral (PI)
controller is used for both queues. This output is squared to
calculate the drop or ECN-marking probability of the classic queue.
This counterbalances the square-root rate equation of Reno/Cubic,
which is the trick that balances flow rates across the queues. For
the ECN-marking probability of the low latency queue, the output of
the base AQM is multiplied by a coupling factor. This determines the
balance between the flow rates in each queue. The default setting
makes the flow rates roughly equal, which should be generally
applicable.
If DUALPI2 AQM has detected overload (due to excessive non-responsive
traffic in either queue), it will switch to signaling congestion
solely using drop, irrespective of the ECN field. Alternatively, it
can be configured to limit the drop probability and let the queue
grow and eventually overflow (like tail-drop).
GSO splitting in DUALPI2 is configurable from userspace while the
default behavior is to split gso. When running DUALPI2 at unshaped
10gigE with 4 download streams test, splitting gso apart results in
halving the latency with no loss in throughput:
Summary of tcp_4down run 'no_split_gso':
avg median # data pts
Ping (ms) ICMP : 0.53 0.30 ms 350
TCP download avg : 2326.86 N/A Mbits/s 350
TCP download sum : 9307.42 N/A Mbits/s 350
TCP download::1 : 2672.99 2568.73 Mbits/s 350
TCP download::2 : 2586.96 2570.51 Mbits/s 350
TCP download::3 : 1786.26 1798.82 Mbits/s 350
TCP download::4 : 2261.21 2309.49 Mbits/s 350
Summart of tcp_4down run 'split_gso':
avg median # data pts
Ping (ms) ICMP : 0.22 0.23 ms 350
TCP download avg : 2335.02 N/A Mbits/s 350
TCP download sum : 9340.09 N/A Mbits/s 350
TCP download::1 : 2335.30 2334.22 Mbits/s 350
TCP download::2 : 2334.72 2334.20 Mbits/s 350
TCP download::3 : 2335.28 2334.58 Mbits/s 350
TCP download::4 : 2334.79 2334.39 Mbits/s 350
A similar result is observed when running DUALPI2 at unshaped 1gigE
with 1 download stream test:
Summary of tcp_1down run 'no_split_gso':
avg median # data pts
Ping (ms) ICMP : 1.13 1.25 ms 350
TCP download : 941.41 941.46 Mbits/s 350
Summart of tcp_1down run 'split_gso':
avg median # data pts
Ping (ms) ICMP : 0.51 0.55 ms 350
TCP download : 941.41 941.45 Mbits/s 350
Additional details can be found in the draft:
https://datatracker.ietf.org/doc/html/rfc9332
Signed-off-by: Koen De Schepper <koen.de_schepper@nokia-bell-labs.com>
Co-developed-by: Olga Albisser <olga@albisser.org>
Signed-off-by: Olga Albisser <olga@albisser.org>
Co-developed-by: Olivier Tilmans <olivier.tilmans@nokia.com>
Signed-off-by: Olivier Tilmans <olivier.tilmans@nokia.com>
Co-developed-by: Henrik Steen <henrist@henrist.net>
Signed-off-by: Henrik Steen <henrist@henrist.net>
Co-developed-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Signed-off-by: Bob Briscoe <research@bobbriscoe.net>
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Acked-by: Dave Taht <dave.taht@gmail.com>
Link: https://patch.msgid.link/20250722095915.24485-4-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The configuration and statistics dump of the DualPI2 Qdisc provides
information related to both queues, such as packet numbers and queuing
delays in the L-queue and C-queue, as well as general information such as
probability value, WRR credits, memory usage, packet marking counters, max
queue size, etc.
The following patch includes enqueue/dequeue for DualPI2.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Link: https://patch.msgid.link/20250722095915.24485-3-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DualPI2 is the reference implementation of IETF RFC9332 DualQ Coupled
AQM (https://datatracker.ietf.org/doc/html/rfc9332) providing two
queues called low latency (L-queue) and classic (C-queue). By default,
it enqueues non-ECN and ECT(0) packets into the C-queue and ECT(1) and
CE packets into the low latency queue (L-queue), as per IETF RFC9332 spec.
This patch defines the dualpi2 Qdisc structure and parsing, and the
following two patches include dumping and enqueue/dequeue for the DualPI2.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Link: https://patch.msgid.link/20250722095915.24485-2-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Byungchul Park says:
====================
Split netmem from struct page
The MM subsystem is trying to reduce struct page to a single pointer.
See the following link for your information:
https://kernelnewbies.org/MatthewWilcox/Memdescs/Path
The first step towards that is splitting struct page by its individual
users, as has already been done with folio and slab. This patchset does
that for page pool.
Matthew Wilcox tried and stopped the same work, you can see in:
https://lore.kernel.org/20230111042214.907030-1-willy@infradead.org
I focused on removing the page pool members in struct page this time,
not moving the allocation code of page pool from net to mm. It can be
done later if needed.
====================
Link: https://patch.msgid.link/20250721021835.63939-1-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make mlx4 access ->pp_ref_count through netmem_desc instead of page.
While at it, add a helper, pp_page_to_nmdesc() and __pp_page_to_nmdesc(),
that can be used to get netmem_desc from page only if it's a pp page.
For now that netmem_desc overlays on page, it can be achieved by just
casting, and use macro and _Generic to cover const casting as well.
Plus, change page_pool_page_is_pp() to check for 'const struct page *'
instead of 'struct page *' since it doesn't modify data and additionally
covers const type.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-4-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To eliminate the use of the page pool fields in struct page, the page
pool code should use netmem descriptor and APIs instead.
However, __netmem_get_pp() still accesses ->pp via struct page. So
change it to use struct netmem_desc instead, since ->pp no longer will
be available in struct page.
While at it, add a helper, __netmem_to_nmdesc(), that can be used to
unsafely get pointer to netmem_desc backing the netmem_ref, only when
the netmem_ref is always backed by system memory.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-3-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To simplify struct page, the page pool members of struct page should be
moved to other, allowing these members to be removed from struct page.
Introduce a network memory descriptor to store the members, struct
netmem_desc, and make it union'ed with the existing fields in struct
net_iov, allowing to organize the fields of struct net_iov.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20250721021835.63939-2-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
mlx5-next updates 2025-07-22
The following pull-request contains common mlx5 updates
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Expose cable_length field in PFCC register
net/mlx5: Add IFC bits and enums for buf_ownership
net/mlx5: Add IFC bits to support RSS for IPSec offload
====================
Link: https://patch.msgid.link/1753175048-330044-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The nipa CI is reporting frequent failures in the mptcp_connect
self-tests.
In the failing scenarios (TCP -> MPTCP) the involved sockets are
actually plain TCP ones, as fallback for passive socket at 2whs
time cause the MPTCP listener to actually create a TCP socket.
The transfer is stuck due to the receiver buffer being zero.
With the stronger check in place, tcp_clamp_window() can be invoked
while the TCP socket has sk_rmem_alloc == 0, and the receive buffer
will be zeroed, too.
Check for the critical condition in tcp_prune_queue() and just
drop the packet without shrinking the receiver buffer.
Fixes: 1d2fbaad7c ("tcp: stronger sk_rcvbuf checks")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20c18165d3f848e1c5c1b782d88c1a5ab38b3f70.1753118029.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Background
==========
When TCP retransmits a packet due to missing ACKs, the
retransmission may fail for various reasons (e.g., packets
stuck in driver queues, receiver zero windows, or routing issues).
The original tcp_retransmit_skb tracepoint:
'commit e086101b15 ("tcp: add a tracepoint for tcp retransmission")'
lacks visibility into these failure causes, making production
diagnostics difficult.
Solution
========
Adds the retval("err") to the tcp_retransmit_skb tracepoint.
Enables users to know why some tcp retransmission failed and
users can filter retransmission failures by retval.
Compatibility description
=========================
This patch extends the tcp_retransmit_skb tracepoint
by adding a new "err" field at the end of its
existing structure (within TP_STRUCT__entry). The
compatibility implications are detailed as follows:
1) Structural compatibility for legacy user-space tools
Legacy tools/BPF programs accessing existing fields
(by offset or name) can still work without modification
or recompilation.The new field is appended to the end,
preserving original memory layout.
2) Note: semantic changes
The original tracepoint primarily only focused on
successfully retransmitted packets. With this patch,
the tracepoint now can figure out packets that may
terminate early due to specific reasons. For accurate
statistics, users should filter using "err" to
distinguish outcomes.
Before patched:
field:const void * skbaddr; offset:8; size:8; signed:0;
field:const void * skaddr; offset:16; size:8; signed:0;
field:int state; offset:24; size:4; signed:1;
field:__u16 sport; offset:28; size:2; signed:0;
field:__u16 dport; offset:30; size:2; signed:0;
field:__u16 family; offset:32; size:2; signed:0;
field:__u8 saddr[4]; offset:34; size:4; signed:0;
field:__u8 daddr[4]; offset:38; size:4; signed:0;
field:__u8 saddr_v6[16]; offset:42; size:16; signed:0;
field:__u8 daddr_v6[16]; offset:58; size:16; signed:0;
print fmt: "skbaddr=%p skaddr=%p family=%s sport=%hu dport=%hu saddr=%pI4 daddr=%pI4 saddrv6=%pI6c daddrv6=%pI6c state=%s"
After patched:
field:const void * skbaddr; offset:8; size:8; signed:0;
field:const void * skaddr; offset:16; size:8; signed:0;
field:int state; offset:24; size:4; signed:1;
field:__u16 sport; offset:28; size:2; signed:0;
field:__u16 dport; offset:30; size:2; signed:0;
field:__u16 family; offset:32; size:2; signed:0;
field:__u8 saddr[4]; offset:34; size:4; signed:0;
field:__u8 daddr[4]; offset:38; size:4; signed:0;
field:__u8 saddr_v6[16]; offset:42; size:16; signed:0;
field:__u8 daddr_v6[16]; offset:58; size:16; signed:0;
field:int err; offset:76; size:4; signed:1;
print fmt: "skbaddr=%p skaddr=%p family=%s sport=%hu dport=%hu saddr=%pI4 daddr=%pI4 saddrv6=%pI6c daddrv6=%pI6c state=%s err=%d"
Co-developed-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Fan Yu <fan.yu9@zte.com.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250721111607626_BDnIJB0ywk6FghN63bor@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add comments on endif & endmenu blocks. This can save time
when searching & trying to understand kconfig menu dependencies.
The other endif & endmenu statements are already commented like this.
This makes it similar to drivers/net/Kconfig, which is already
commented like this.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250721020420.3555128-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mohsin Bashir says:
====================
selftests: drv-net: Test XDP native support
This patch series add tests to validate XDP native support for PASS,
DROP, ABORT, and TX actions, as well as headroom and tailroom adjustment.
For adjustment tests, validate support for both the extension and
shrinking cases across various packet sizes and offset values.
The pass criteria for head/tail adjustment tests require that at-least
one adjustment value works for at-least one packet size. This ensure
that the variability in maximum supported head/tail adjustment offset
across different drivers is being incorporated.
The results reported in this series are based on netdevsim. However,
the series is tested against multiple other drivers including fbnic.
Note: The XDP support for fbnic will be added later.
====================
Link: https://patch.msgid.link/20250719083059.3209169-1-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add test to validate the headroom adjustment support for both extension
and the shrinking cases. For the extension part, eat up space from
the start of payload data whereas, for the shrinking part, populate
the newly available space with a tag. In the user-space, validate that a
test string is manipulated accordingly.
The negative and positive offset values result in shrinking and growing of
headroom (growing and shrinking of payload) respectively.
TAP version 13
1..9
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
ok 5 xdp.test_xdp_native_tx_mb
\# Failed run: pkt_sz 512, ... offset 1. Reason: Adjustment failed
ok 6 xdp.test_xdp_native_adjst_tail_grow_data
ok 7 xdp.test_xdp_native_adjst_tail_shrnk_data
\# Failed run: pkt_sz 512, ... offset -128. Reason: Adjustment failed
ok 8 xdp.test_xdp_native_adjst_head_grow_data
\# Failed run: pkt_sz (512) > HDS threshold (0) and offset 64 > 48
ok 9 xdp.test_xdp_native_adjst_head_shrnk_data
\# Totals: pass:9 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-6-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add test to validate support for the two cases of tail adjustment: 1)
tail extension, and 2) tail shrinking across different frame sizes and
offset values. For each of the two cases, test both the single and
multi-buffer cases by choosing appropriate packet size.
The negative offset value result in growing of tailroom (shrinking of
payload) while the positive offset result in shrinking of tailroom
(growing of payload).
Since the support for tail adjustment varies across drivers, classify the
test as pass if at least one combination of packet size and offset from a
pre-selected list results in a successful run. In case of an unsuccessful
run, report the failure and highlight the packet size and offset values
that caused the test to fail, as well as the values that resulted in the
last successful run.
Note: The growing part of this test for netdevsim may appear flaky when
the offset value is larger than 1. This behavior occurs because tailroom
is not explicitly reserved for netdevsim, with 1 being the typical
tailroom value. However, in certain cases, such as payload being the last
in the page with additional available space, the truesize is expanded.
This also result increases the tailroom causing the test to pass
intermittently. In contrast, when tailrrom is explicitly reserved, such
as in the of fbnic, the test results are deterministic.
./drivers/net/xdp.py
TAP version 13
1..7
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
ok 5 xdp.test_xdp_native_tx_mb
\# Failed run: ... successful run: ... offset 1. Reason: Adjustment failed
ok 6 xdp.test_xdp_native_adjst_tail_grow_data
ok 7 xdp.test_xdp_native_adjst_tail_shrnk_data
\# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-5-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add test to verify the XDP_TX functionality by generating traffic from a
remote node on a specific UDP port and redirecting it back to the sender.
./drivers/net/xdp.py
TAP version 13
1..5
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
ok 5 xdp.test_xdp_native_tx_mb
\# Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-4-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test XDP_PASS/DROP in single buffer and multi buffer mode when
XDP native support is available.
./drivers/net/xdp.py
TAP version 13
1..4
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
\# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-3-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hariprasad Kelam says:
====================
Octeontx2-af: RPM: misc feaures
This series patches adds different features like debugfs
support for shared firmware structure and DMAC filter
related enhancements.
Patch1: Saves interface MAC address configured from DMAC filters.
Patch2: Disables the stale DMAC filters in driver initialization
Patch3: Configure dma mask for CGX/RPM drivers
Patch4: Debugfs support for shared firmware data.
====================
Link: https://patch.msgid.link/20250720163638.1560323-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Octeontx2/CN10k MAC block supports DMAC filters. DMAC filters
can be installed on the interface through ethtool.
When a user installs a DMAC filter, the interface's MAC address
is implicitly added to the filter list. To ensure consistency,
this MAC address must be kept in sync with the pfvf->mac_addr field,
which is used to install MAC-based NPC rules.
This patch updates the pfvf->mac_addr field with the programmed MAC
address and also enables VF interfaces to install DMAC filters.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250720163638.1560323-2-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
