In commit 7e71b85473 ("arm64: dts: ls1028a: fix node name for the
sysclk") the sysclk node name was renamed and broke the erratum
workaround because it tries to fetch a device tree node by its name,
which is very fragile in general. We don't even need the sysclk node
because the only possible sysclk frequency input is 100MHz. In fact, the
erratum says it applies if SYS_PLL_RAT is 3, not that the platform clock
is 300 MHz. Make the workaround more reliable and just drop the unneeded
sysclk lookup.
For reference, the error during the bootup is the following:
[ 4.898400] nxp-fspi 20c0000.spi: Errata cannot be executed. Read via IP bus may not work
Fixes: 82ce7d0e74 ("spi: spi-nxp-fspi: Implement errata workaround for LS1028A")
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20211001212726.159437-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to read the data from the flash using external DMA.
Cadence Octal SPI Flash Controller has optional DMA peripheral interface
to communicate indirect mode of operations with external DMA.
Xilinx Versal OSPI has external DMA enabled, this will automatically
request the external DMA to fetch the data from SRAM. It supports only
reading the data from SRAM (DMA read) and doesn't support writing the
data to SRAM (DMA write).
Xilinx Versal OSPI read the data from the flash device using external DMA
and write the data to the flash device using software triggered
indirect mode.
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Link: https://lore.kernel.org/r/1632478031-12242-5-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the function 'mtk_spi_set_hw_cs_timing'
the 'setup', 'hold' and 'inactive' delays are configured.
In case those values are 0 it causes errors on mt8173:
cros-ec-i2c-tunnel 1100a000.spi:ec@0:i2c-tunnel0:
Error transferring EC i2c message -71
cros-ec-spi spi0.0: EC failed to respond in time.
This patch fixes that issues by setting only the values
that are not 0.
Fixes: 04e6bb0d6b ("spi: modify set_cs_timing parameter")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Link: https://lore.kernel.org/r/20211001152153.4604-1-dafna.hirschfeld@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch series adds support for Cadence's XSPI controller.
It supports 3 work modes.
1. ACMD (auto command) work mode
ACMD name is because it uses auto command engine in the controller.
It further has 2 modes PIO and CDMA (command DMA).
The CDMA work mode is dedicated for high-performance application
where very low software overhead is required. In this mode the
Command Engine is programmed by the series of linked descriptors
stored in system memory. These descriptors provide commands to execute
and store status information for finished commands.
The PIO mode work mode is dedicated for single operation where
constructing a linked list of descriptors would require too
much effort.
2. STIG (Software Triggered Instruction Generator) work mode
In STIG mode, controller sends low-level instructions to memory.
Each instruction is 128-bit width. There is special instruction
DataSequence which carries information about data phase.
Driver uses Slave DMA interface to transfer data as only this
interface can be used in STIG work mode.
3. Direct work mode
This work mode allows sending data without invoking any command through
the slave interface.
Currently only STIG work mode is enabled, remaining work modes will
be added later.
Changes since v5:
1. Added adjust_op_size to adjust op size according to sdma size.
Changes since v4:
1. Changed reg region names and lengths as suggested by Rob.
Changes since v3:
1. Removed ACMD PIO mode.
2. Return IRQ_HANDLED only for handled interrupts.
3. DT binding changes.
Changes since v2:
1. Removed extra lock around exec_op.
2. Removed PHY parameters setting from the driver, those will be
handled by bootstrap pins available in the controller.
Changes since v1:
1. Use ACMD PIO work mode for NOR read, program and erase operations,
for everything else use STIG(Software Triggered Instruction
Generator) work mode.
2. Changes suggested by Lukas.
Parshuram Thombare (2):
spi: cadence: add dt-bindings documentation for Cadence XSPI
controller
spi: cadence: add support for Cadence XSPI controller
.../devicetree/bindings/spi/cdns,xspi.yaml | 77 +++
drivers/spi/Kconfig | 12 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-cadence-xspi.c | 640 +++++++++++++++++++++
4 files changed, 730 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/cdns,xspi.yaml
create mode 100644 drivers/spi/spi-cadence-xspi.c
--
2.7.4
This patch adds driver for Cadence's XSPI controller.
It supports 3 work modes.
1. ACMD (auto command) work mode
ACMD name is because it uses auto command engine in the controller.
It further has 2 modes PIO and CDMA (command DMA).
The CDMA work mode is dedicated for high-performance application
where very low software overhead is required. In this mode the
Command Engine is programmed by the series of linked descriptors
stored in system memory. These descriptors provide commands to execute
and store status information for finished commands.
The PIO mode work mode is dedicated for single operation where
constructing a linked list of descriptors would require too
much effort.
2. STIG (Software Triggered Instruction Generator) work mode
In STIG mode, controller sends low-level instructions to memory.
Each instruction is 128-bit width. There is special instruction
DataSequence which carries information about data phase.
Driver uses Slave DMA interface to transfer data as only this
interface can be used in STIG work mode.
3. Direct work mode
This work mode allows sending data without invoking any command through
the slave interface.
Currently only STIG work mode is enabled, remaining work modes will
be added later.
Signed-off-by: Konrad Kociolek <konrad@cadence.com>
Signed-off-by: Jayshri Pawar <jpawar@cadence.com>
Signed-off-by: Parshuram Thombare <pthombar@cadence.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/1632038734-23999-1-git-send-email-pthombar@cadence.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.
Fixes: 96c8395e21 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210923170023.1683-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull ksmbd fixes from Steve French:
"Five fixes for the ksmbd kernel server, including three security
fixes:
- remove follow symlinks support
- use LOOKUP_BENEATH to prevent out of share access
- SMB3 compounding security fix
- fix for returning the default streams correctly, fixing a bug when
writing ppt or doc files from some clients
- logging more clearly that ksmbd is experimental (at module load
time)"
* tag '5.15-rc2-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: use LOOKUP_BENEATH to prevent the out of share access
ksmbd: remove follow symlinks support
ksmbd: check protocol id in ksmbd_verify_smb_message()
ksmbd: add default data stream name in FILE_STREAM_INFORMATION
ksmbd: log that server is experimental at module load
Pull EDAC fixes from Borislav Petkov:
"Fix two EDAC drivers using the wrong value type for the DIMM mode"
* tag 'edac_urgent_for_v5.15_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/dmc520: Assign the proper type to dimm->edac_mode
EDAC/synopsys: Fix wrong value type assignment for edac_mode
Pull thermal fixes from Daniel Lezcano:
- Fix thermal shutdown after a suspend/resume due to a wrong TCC value
restored on Intel platform (Antoine Tenart)
- Fix potential buffer overflow when building the list of policies. The
buffer size is not updated after writing to it (Dan Carpenter)
- Fix wrong check against IS_ERR instead of NULL (Ansuel Smith)
* tag 'thermal-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/tsens: Fix wrong check for tzd in irq handlers
thermal/core: Potential buffer overflow in thermal_build_list_of_policies()
thermal/drivers/int340x: Do not set a wrong tcc offset on resume
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for X86:
- Prevent sending the wrong signal when protection keys are enabled
and the kernel handles a fault in the vsyscall emulation.
- Invoke early_reserve_memory() before invoking e820_memory_setup()
which is required to make the Xen dom0 e820 hooks work correctly.
- Use the correct data type for the SETZ operand in the EMQCMDS
instruction wrapper.
- Prevent undefined behaviour to the potential unaligned accesss in
the instruction decoder library"
* tag 'x86-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/insn, tools/x86: Fix undefined behavior due to potential unaligned accesses
x86/asm: Fix SETZ size enqcmds() build failure
x86/setup: Call early_reserve_memory() earlier
x86/fault: Fix wrong signal when vsyscall fails with pkey
Pull timer fix from Thomas Gleixner:
"A single fix for the recently introduced regression in posix CPU
timers which failed to stop the timer when requested. That caused
unexpected signals to be sent to the process/thread causing
malfunction"
* tag 'timers-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Prevent spuriously armed 0-value itimer
Pull irq fixes from Thomas Gleixner:
"A set of fixes for interrupt chip drivers:
- Work around a bad GIC integration on a Renesas platform which can't
handle byte-sized MMIO access
- Plug a potential memory leak in the GICv4 driver
- Fix a regression in the Armada 370-XP IPI code which was caused by
issuing EOI instack of ACK.
- A couple of small fixes here and there"
* tag 'irq-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic: Work around broken Renesas integration
irqchip/renesas-rza1: Use semicolons instead of commas
irqchip/gic-v3-its: Fix potential VPE leak on error
irqchip/goldfish-pic: Select GENERIC_IRQ_CHIP to fix build
irqchip/mbigen: Repair non-kernel-doc notation
irqdomain: Change the type of 'size' in __irq_domain_add() to be consistent
irqchip/armada-370-xp: Fix ack/eoi breakage
Documentation: Fix irq-domain.rst build warning
Merge misc fixes from Andrew Morton:
"16 patches.
Subsystems affected by this patch series: xtensa, sh, ocfs2, scripts,
lib, and mm (memory-failure, kasan, damon, shmem, tools, pagecache,
debug, and pagemap)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: fix uninitialized use in overcommit_policy_handler
mm/memory_failure: fix the missing pte_unmap() call
kasan: always respect CONFIG_KASAN_STACK
sh: pgtable-3level: fix cast to pointer from integer of different size
mm/debug: sync up latest migrate_reason to migrate_reason_names
mm/debug: sync up MR_CONTIG_RANGE and MR_LONGTERM_PIN
mm: fs: invalidate bh_lrus for only cold path
lib/zlib_inflate/inffast: check config in C to avoid unused function warning
tools/vm/page-types: remove dependency on opt_file for idle page tracking
scripts/sorttable: riscv: fix undeclared identifier 'EM_RISCV' error
ocfs2: drop acl cache for directories too
mm/shmem.c: fix judgment error in shmem_is_huge()
xtensa: increase size of gcc stack frame check
mm/damon: don't use strnlen() with known-bogus source length
kasan: fix Kconfig check of CC_HAS_WORKING_NOSANITIZE_ADDRESS
mm, hwpoison: add is_free_buddy_page() in HWPoisonHandlable()
Pull SCSI fixes from James Bottomley:
"Thirty-three fixes, I'm afraid.
Essentially the build up from the last couple of weeks while I've been
dealling with Linux Plumbers conference infrastructure issues. It's
mostly the usual assortment of spelling fixes and minor corrections.
The only core relevant changes are to the sd driver to reduce the spin
up message spew and fix a small memory leak on the freeing path"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (33 commits)
scsi: ses: Retry failed Send/Receive Diagnostic commands
scsi: target: Fix spelling mistake "CONFLIFT" -> "CONFLICT"
scsi: lpfc: Fix gcc -Wstringop-overread warning, again
scsi: lpfc: Use correct scnprintf() limit
scsi: lpfc: Fix sprintf() overflow in lpfc_display_fpin_wwpn()
scsi: core: Remove 'current_tag'
scsi: acornscsi: Remove tagged queuing vestiges
scsi: fas216: Kill scmd->tag
scsi: qla2xxx: Restore initiator in dual mode
scsi: ufs: core: Unbreak the reset handler
scsi: sd_zbc: Support disks with more than 2**32 logical blocks
scsi: ufs: core: Revert "scsi: ufs: Synchronize SCSI and UFS error handling"
scsi: bsg: Fix device unregistration
scsi: sd: Make sd_spinup_disk() less noisy
scsi: ufs: ufs-pci: Fix Intel LKF link stability
scsi: mpt3sas: Clean up some inconsistent indenting
scsi: megaraid: Clean up some inconsistent indenting
scsi: sr: Fix spelling mistake "does'nt" -> "doesn't"
scsi: Remove SCSI CDROM MAINTAINERS entry
scsi: megaraid: Fix Coccinelle warning
...
Pull io_uring fixes from Jens Axboe:
"This one looks a bit bigger than it is, but that's mainly because 2/3
of it is enabling IORING_OP_CLOSE to close direct file descriptors.
We've had a few folks using them and finding it confusing that the way
to close them is through using -1 for file update, this just brings
API symmetry for direct descriptors. Hence I think we should just do
this now and have a better API for 5.15 release. There's some room for
de-duplicating the close code, but we're leaving that for the next
merge window.
Outside of that, just small fixes:
- Poll race fixes (Hao)
- io-wq core dump exit fix (me)
- Reschedule around potentially intensive tctx and buffer iterators
on teardown (me)
- Fix for always ending up punting files update to io-wq (me)
- Put the provided buffer meta data under memcg accounting (me)
- Tweak for io_write(), removing dead code that was added with the
iterator changes in this release (Pavel)"
* tag 'io_uring-5.15-2021-09-25' of git://git.kernel.dk/linux-block:
io_uring: make OP_CLOSE consistent with direct open
io_uring: kill extra checks in io_write()
io_uring: don't punt files update to io-wq unconditionally
io_uring: put provided buffer meta data under memcg accounting
io_uring: allow conditional reschedule for intensive iterators
io_uring: fix potential req refcount underflow
io_uring: fix missing set of EPOLLONESHOT for CQ ring overflow
io_uring: fix race between poll completion and cancel_hash insertion
io-wq: ensure we exit if thread group is exiting
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- keep ctrl->namespaces ordered (Christoph Hellwig)
- fix incorrect h2cdata pdu offset accounting in nvme-tcp (Sagi
Grimberg)
- handled updated hw_queues in nvme-fc more carefully (Daniel
Wagner, James Smart)
- md lock order fix (Christoph)
- fallocate locking fix (Ming)
- blktrace UAF fix (Zhihao)
- rq-qos bio tracking fix (Ming)
* tag 'block-5.15-2021-09-25' of git://git.kernel.dk/linux-block:
block: hold ->invalidate_lock in blkdev_fallocate
blktrace: Fix uaf in blk_trace access after removing by sysfs
block: don't call rq_qos_ops->done_bio if the bio isn't tracked
md: fix a lock order reversal in md_alloc
nvme: keep ctrl->namespaces ordered
nvme-tcp: fix incorrect h2cdata pdu offset accounting
nvme-fc: remove freeze/unfreeze around update_nr_hw_queues
nvme-fc: avoid race between time out and tear down
nvme-fc: update hardware queues before using them
Pull xen fixes from Juergen Gross:
"Some minor cleanups and fixes of some theoretical bugs, as well as a
fix of a bug introduced in 5.15-rc1"
* tag 'for-linus-5.15b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/x86: fix PV trap handling on secondary processors
xen/balloon: fix balloon kthread freezing
swiotlb-xen: this is PV-only on x86
xen/pci-swiotlb: reduce visibility of symbols
PCI: only build xen-pcifront in PV-enabled environments
swiotlb-xen: ensure to issue well-formed XENMEM_exchange requests
Xen/gntdev: don't ignore kernel unmapping error
xen/x86: drop redundant zeroing from cpu_initialize_context()
Pull Kselftest fixes from Shuah Khan:
- fix to Kselftest common framework header install to run before other
targets for it work correctly in parallel build case.
- fixes to kvm test to not ignore fscanf() returns which could result
in inconsistent test behavior and failures.
* tag 'linux-kselftest-fixes-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: kvm: fix get_run_delay() ignoring fscanf() return warn
selftests: kvm: move get_run_delay() into lib/test_util
selftests:kvm: fix get_trans_hugepagesz() ignoring fscanf() return warn
selftests:kvm: fix get_warnings_count() ignoring fscanf() return warn
selftests: be sure to make khdr before other targets
Pull erofs fixes from Gao Xiang:
"Two bugfixes to fix the 4KiB blockmap chunk format availability and a
dangling pointer usage. There is also a trivial cleanup to clarify
compacted_2b if compacted_4b_initial > totalidx.
Summary:
- fix the dangling pointer use in erofs_lookup tracepoint
- fix unsupported chunk format check
- zero out compacted_2b if compacted_4b_initial > totalidx"
* tag 'erofs-for-5.15-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: clear compacted_2b if compacted_4b_initial > totalidx
erofs: fix misbehavior of unsupported chunk format check
erofs: fix up erofs_lookup tracepoint
Pull cifs fixes from Steve French:
"Six small cifs/smb3 fixes, two for stable:
- important fix for deferred close (found by a git functional test)
related to attribute caching on close.
- four (two cosmetic, two more serious) small fixes for problems
pointed out by smatch via Dan Carpenter
- fix for comment formatting problems pointed out by W=1"
* tag '5.15-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix incorrect check for null pointer in header_assemble
smb3: correct server pointer dereferencing check to be more consistent
smb3: correct smb3 ACL security descriptor
cifs: Clear modified attribute bit from inode flags
cifs: Deal with some warnings from W=1
cifs: fix a sign extension bug
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.15-rc3.
Nothing huge in here, just fixes for a number of small issues that
have been reported. These include:
- habanalabs race conditions and other bugs fixed
- binder driver fixes
- fpga driver fixes
- coresight build warning fix
- nvmem driver fix
- comedi memory leak fix
- bcm-vk tty race fix
- other tiny driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
comedi: Fix memory leak in compat_insnlist()
nvmem: NVMEM_NINTENDO_OTP should depend on WII
misc: bcm-vk: fix tty registration race
fpga: dfl: Avoid reads to AFU CSRs during enumeration
fpga: machxo2-spi: Fix missing error code in machxo2_write_complete()
fpga: machxo2-spi: Return an error on failure
habanalabs: expose a single cs seq in staged submissions
habanalabs: fix wait offset handling
habanalabs: rate limit multi CS completion errors
habanalabs/gaudi: fix LBW RR configuration
habanalabs: Fix spelling mistake "FEADBACK" -> "FEEDBACK"
habanalabs: fail collective wait when not supported
habanalabs/gaudi: use direct MSI in single mode
habanalabs: fix kernel OOPs related to staged cs
habanalabs: fix potential race in interrupt wait ioctl
mcb: fix error handling in mcb_alloc_bus()
misc: genwqe: Fixes DMA mask setting
coresight: syscfg: Fix compiler warning
nvmem: core: Add stubs for nvmem_cell_read_variable_le_u32/64 if !CONFIG_NVMEM
binder: make sure fd closes complete
...
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for 5.15-rc3:
- greybus tty use-after-free bugfix
- r8188eu ioctl overlap build warning fix
Note, the r8188eu ioctl has been entirely removed for 5.16-rc1, but
it's good to get this fixed now for people using this in 5.15.
Both of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: fix -Wrestrict warnings
staging: greybus: uart: fix tty use after free
Pull tty/serial fixes from Greg KH:
"Here are four small tty/serial driver fixes for 5.15-rc3. They
include:
- remove an export now that no one is using it anymore
- mvebu-uart tx_empty callback fix
- 8250_omap bugfix
- synclink_gt build fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: unexport tty_ldisc_release
tty: synclink_gt: rename a conflicting function name
serial: mvebu-uart: fix driver's tx_empty callback
serial: 8250: 8250_omap: Fix RX_LVL register offset
Pull USB driver fixes from Greg KH:
"Here are some USB driver fixes and new device ids for 5.15-rc3.
They include:
- usb-storage quirk additions
- usb-serial new device ids
- usb-serial driver fixes
- USB roothub registration bugfix to resolve a long-reported issue
- usb gadget driver fixes for a large number of small things
- dwc2 driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
USB: serial: option: add device id for Foxconn T99W265
USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter
USB: serial: cp210x: add part-number debug printk
USB: serial: cp210x: fix dropped characters with CP2102
MAINTAINERS: usb, update Peter Korsgaard's entries
usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned()
usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c
Re-enable UAS for LaCie Rugged USB3-FW with fk quirk
USB: serial: option: remove duplicate USB device ID
USB: serial: mos7840: remove duplicated 0xac24 device ID
arm64: dts: qcom: ipq8074: remove USB tx-fifo-resize property
usb: gadget: f_uac2: Populate SS descriptors' wBytesPerInterval
usb: gadget: f_uac2: Add missing companion descriptor for feedback EP
usb: dwc2: gadget: Fix ISOC transfer complete handling for DDMA
usb: core: hcd: Modularize HCD stop configuration in usb_stop_hcd()
xhci: Set HCD flag to defer primary roothub registration
usb: core: hcd: Add support for deferring roothub registration
usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave
usb: dwc3: core: balance phy init and exit
Revert "USB: bcma: Add a check for devm_gpiod_get"
...
instead of removing '..' in a given path, call
kern_path with LOOKUP_BENEATH flag to prevent
the out of share access.
ran various test on this:
smb2-cat-async smb://127.0.0.1/homes/../out_of_share
smb2-cat-async smb://127.0.0.1/homes/foo/../../out_of_share
smbclient //127.0.0.1/homes -c "mkdir ../foo2"
smbclient //127.0.0.1/homes -c "rename bar ../bar"
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Boehme <slow@samba.org>
Tested-by: Steve French <smfrench@gmail.com>
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We get an unexpected value of /proc/sys/vm/overcommit_memory after
running the following program:
int main()
{
int fd = open("/proc/sys/vm/overcommit_memory", O_RDWR);
write(fd, "1", 1);
write(fd, "2", 1);
close(fd);
}
write(fd, "2", 1) will pass *ppos = 1 to proc_dointvec_minmax.
proc_dointvec_minmax will return 0 without setting new_policy.
t.data = &new_policy;
ret = proc_dointvec_minmax(&t, write, buffer, lenp, ppos)
-->do_proc_dointvec
-->__do_proc_dointvec
if (write) {
if (proc_first_pos_non_zero_ignore(ppos, table))
goto out;
sysctl_overcommit_memory = new_policy;
so sysctl_overcommit_memory will be set to an uninitialized value.
Check whether new_policy has been changed by proc_dointvec_minmax.
Link: https://lkml.kernel.org/r/20210923020524.13289-1-chenjun102@huawei.com
Fixes: 56f3547bfa ("mm: adjust vm_committed_as_batch according to vm overcommit policy")
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Rui Xiang <rui.xiang@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, the asan-stack parameter is only passed along if
CFLAGS_KASAN_SHADOW is not empty, which requires KASAN_SHADOW_OFFSET to
be defined in Kconfig so that the value can be checked. In RISC-V's
case, KASAN_SHADOW_OFFSET is not defined in Kconfig, which means that
asan-stack does not get disabled with clang even when CONFIG_KASAN_STACK
is disabled, resulting in large stack warnings with allmodconfig:
drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c:117:12: error: stack frame size (14400) exceeds limit (2048) in function 'lb035q02_connect' [-Werror,-Wframe-larger-than]
static int lb035q02_connect(struct omap_dss_device *dssdev)
^
1 error generated.
Ensure that the value of CONFIG_KASAN_STACK is always passed along to
the compiler so that these warnings do not happen when
CONFIG_KASAN_STACK is disabled.
Link: https://github.com/ClangBuiltLinux/linux/issues/1453
References: 6baec880d7 ("kasan: turn off asan-stack for clang-8 and earlier")
Link: https://lkml.kernel.org/r/20210922205525.570068-1-nathan@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If X2TLB=y (CPU_SHX2=y or CPU_SHX3=y, e.g. migor_defconfig), pgd_t.pgd
is "unsigned long long", causing:
In file included from arch/sh/include/asm/pgtable.h:13,
from include/linux/pgtable.h:6,
from include/linux/mm.h:33,
from arch/sh/kernel/asm-offsets.c:14:
arch/sh/include/asm/pgtable-3level.h: In function `pud_pgtable':
arch/sh/include/asm/pgtable-3level.h:37:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
37 | return (pmd_t *)pud_val(pud);
| ^
Fix this by adding an intermediate cast to "unsigned long", which is
basically what the old code did before.
Link: https://lkml.kernel.org/r/2c2eef3c9a2f57e5609100a4864715ccf253d30f.1631713483.git.geert+renesas@glider.be
Fixes: 9cf6fa2458 ("mm: rename pud_page_vaddr to pud_pgtable and make it return pmd_t *")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Daniel Palmer <daniel@thingy.jp>
Acked-by: Rob Landley <rob@landley.net>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Cc: Rich Felker <dalias@libc.org>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Idle page tracking can also be used for process address space, not only
file mappings.
Without this change, using with '-i' option for process address space
encounters below errors reported.
$ sudo ./page-types -p $(pidof bash) -i
mark page idle: Bad file descriptor
mark page idle: Bad file descriptor
mark page idle: Bad file descriptor
mark page idle: Bad file descriptor
...
Link: https://lkml.kernel.org/r/20210917032826.10669-1-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
