There are 2 ways to create IPoIB PKEY child interfaces:
1) Writing a PKEY to /sys/class/net/<ib parent interface>/create_child.
2) Using netlink with iproute.
While with sysfs the child interface has the same number of tx and
rx queues as the parent, with netlink there will always be 1 tx
and 1 rx queue for the child interface. That's because the
get_num_tx/rx_queues() netlink ops are missing and the default value
of 1 is taken for the number of queues (in rtnl_create_link()).
This change adds the get_num_tx/rx_queues() ops which allows for
interfaces with multiple queues to be created over netlink. This
constant only represents the max number of tx and rx queues on that
net device.
Fixes: 9baa0b0364 ("IB/ipoib: Add rtnl_link_ops support")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://lore.kernel.org/r/f4a42c8aa43c02d5ae5559a60c3e5e0f18c82531.1670485816.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Similar to RDMA and Atomic qp attributes enabled by default in CM, enable
FLUSH attribute for supported device. That makes applications that are
built with rdma_create_ep, rdma_accept APIs have FLUSH qp attribute
natively so that user is able to request FLUSH operation simpler.
Note that, a FLUSH operation requires FLUSH are supported by both
device(HCA) and memory region(MR) and QP at the same time, so it's safe
to enable FLUSH qp attribute by default here.
FLUSH attribute can be disable by modify_qp() interface.
Link: https://lore.kernel.org/r/20221206130201.30986-10-lizhijian@fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Only the requested placement types that also registered in the destination
memory region are acceptable.
Otherwise, responder will also reply NAK "Remote Access Error" if it
found a placement type violation.
We will persist data via arch_wb_cache_pmem(), which could be
architecture specific.
This commit also adds 2 helpers to update qp.resp from the incoming packet.
Link: https://lore.kernel.org/r/20221206130201.30986-8-lizhijian@fujitsu.com
Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Memory region could support at most 2 flush access flags:
IB_ACCESS_FLUSH_PERSISTENT and IB_ACCESS_FLUSH_GLOBAL
But we only allow user to register persistent flush flags to the pmem MR
where it has the ability of persisting data across power cycles.
So registering a persistent access flag to a non-pmem MR will be rejected.
Link: https://lore.kernel.org/r/20221206130201.30986-5-lizhijian@fujitsu.com
CC: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This commit extends the RDMA kernel verbs ABI to support the flush
operation defined in IBA A19.4.1. These changes are
backward compatible with the existing RDMA kernel verbs ABI.
It makes device/HCA support new FLUSH attributes/capabilities, and it
also makes memory region support new FLUSH access flags.
Users can use ibv_reg_mr(3) to register flush access flags. Only the
access flags also supported by device's capabilities can be registered
successfully.
Once registered successfully, it means the MR is flushable. Similarly,
A flushable MR should also have one or both of GLOBAL_VISIBILITY and
PERSISTENT attributes/capabilities like device/HCA.
Link: https://lore.kernel.org/r/20221206130201.30986-3-lizhijian@fujitsu.com
Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The code in rxe_resp.c at check_length() is incorrect as it compares
pkt->opcode an 8 bit value against various mask bits which are all higher
than 256 so nothing is ever reported.
This patch rewrites this to compare against pkt->mask which is
correct. However this now exposes another error. For UD send packets the
value of the pmtu cannot be determined from qp->mtu. All that is required
here is to later check if the payload fits into the posted receive buffer
in that case.
Fixes: 837a55847e ("RDMA/rxe: Implement packet length validation on responder")
Link: https://lore.kernel.org/r/20221208210945.28607-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The queried AH attr is invalid. This patch fix it.
This problem is found by rdma-core test test_mr_rereg_pd
ERROR: test_mr_rereg_pd (tests.test_mr.MRTest)
Test that cover rereg MR's PD with this flow:
----------------------------------------------------------------------
Traceback (most recent call last):
File "./tests/test_mr.py", line 157, in test_mr_rereg_pd
self.restate_qps()
File "./tests/test_mr.py", line 113, in restate_qps
self.server.qp.to_rts(self.server_qp_attr)
File "qp.pyx", line 1137, in pyverbs.qp.QP.to_rts
File "qp.pyx", line 1123, in pyverbs.qp.QP.to_rtr
pyverbs.pyverbs_error.PyverbsRDMAError: Failed to modify QP state to RTR.
Errno: 22, Invalid argument
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/20221126102911.2921820-3-xuhaoyue1@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
After the hns roce driver is loaded, if you modify the mac address of the
network port, the following error will appear:
__ib_cache_gid_add: unable to add gid fe80:0000:0000:0000:4600:4dff:fe22:abb5 error=-28
hns3 0000:7d:00.0 hns_0: attr path_mtu(1) invalid while modify qp
The reason for the error is that the gid being occupied will cause the
failure to modify the gid. The gid is occupied by the loopback QP used by
free mr. When the mac address is modified, the gid will change. If there
is a busy QP at this time, the gid will not be released and the
modification will fail. The QP of free mr is created using the ib
interface. The ib interface will add a reference count to the gid,
resulting in this error scenario.
Considering that free mr is solving a bug in HIP08, not an actual
business, it is not necessary to use ib interfaces.
Fixes: 70f9252158 ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Link: https://lore.kernel.org/r/20221126102911.2921820-2-xuhaoyue1@hisilicon.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The ack timeout retransmission time is affected by the following two
factors: one is packet life time, another is the HCA processing time.
Now the default packet lifetime(CMA_IBOE_PACKET_LIFETIME) is 18.
That means the minimum ack timeout is 2
seconds (2^(18+1)*4us=2.097seconds). The packet lifetime means the
maximum transmission time of packets on the network, 2 seconds is too
long.
Assume the network is a clos topology with three layers, every packet will
pass through five hops of switches. Assume the buffer of every switch is
128MB and the port transmission rate is 25 Gbit/s, the maximum
transmission time of the packet is 200ms(128MB*5/25Gbit/s). Add double
redundancy, it is less than 500ms.
So change the CMA_IBOE_PACKET_LIFETIME to 16, the maximum transmission
time of the packet will be about 500+ms, it is long enough.
Link: https://lore.kernel.org/r/20221125010026.755-1-lengchao@huawei.com
Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently tpm transactions are executed unconditionally in
tpm_pm_suspend() function, which may lead to races with other tpm
accessors in the system.
Specifically, the hw_random tpm driver makes use of tpm_get_random(),
and this function is called in a loop from a kthread, which means it's
not frozen alongside userspace, and so can race with the work done
during system suspend:
tpm tpm0: tpm_transmit: tpm_recv: error -52
tpm tpm0: invalid TPM_STS.x 0xff, dumping stack for forensics
CPU: 0 PID: 1 Comm: init Not tainted 6.1.0-rc5+ #135
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
Call Trace:
tpm_tis_status.cold+0x19/0x20
tpm_transmit+0x13b/0x390
tpm_transmit_cmd+0x20/0x80
tpm1_pm_suspend+0xa6/0x110
tpm_pm_suspend+0x53/0x80
__pnp_bus_suspend+0x35/0xe0
__device_suspend+0x10f/0x350
Fix this by calling tpm_try_get_ops(), which itself is a wrapper around
tpm_chip_start(), but takes the appropriate mutex.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/all/c5ba47ef-393f-1fba-30bd-1230d1b4b592@suse.cz/
Cc: stable@vger.kernel.org
Fixes: e891db1a18 ("tpm: turn on TPM on suspend for TPM 1.x")
[Jason: reworked commit message, added metadata]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull perf fix from Borislav Petkov:
- Fix a use-after-free case where the perf pending task callback would
see an already freed event
* tag 'perf_urgent_for_v6.1_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix perf_pending_task() UaF
Pull timer fix from Borislav Petkov:
- Revert a fix to RISC-V timers supposed to address an uncertainty
whether clock events are received during S3 or not which locks up
other RISC-V platforms. The issue will be fixed differently later.
* tag 'timers_urgent_for_v6.1_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "clocksource/drivers/riscv: Events are stopped during CPU suspend"
Pull powerpc fixes from Michael Ellerman:
- Fix oops in 32-bit BPF tail call tests
- Add missing declaration for machine_check_early_boot()
Thanks to Christophe Leroy and Naveen N. Rao.
* tag 'powerpc-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Add missing declaration for machine_check_early_boot()
powerpc/bpf/32: Fix Oops on tail call tests
Pull input fix from Dmitry Torokhov:
- a fix for Raydium touchscreen driver to stop leaking memory when
sending commands to the chip
* tag 'input-for-v6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: raydium_ts_i2c - fix memory leak in raydium_i2c_send()
In the previous iteration of the while loop, the "ret" may have been
assigned a value of 0, so the error return code -EINVAL may have been
incorrectly set to 0. To fix set valid return code before calling to
goto. Also investigate each case separately as Andy suggessted.
Fixes: e711f968c4 ("IB/srp: replace custom implementation of hex2bin()")
Fixes: 2a174df0c6 ("IB/srp: Use kstrtoull() instead of simple_strtoull()")
Fixes: 19f313438c ("IB/srp: Add RDMA/CM support")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1669953638-11747-2-git-send-email-wangyufen@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Pull i2c fixes from Wolfram Sang:
"A power state fix in the core for ACPI devices, a regression fix
regarding bus recovery for the cadence driver, a DMA handling fix for
the imx driver, and two error path fixes (npcm7xx and qcom-geni)"
* tag 'i2c-for-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx: Only DMA messages with I2C_M_DMA_SAFE flag set
i2c: qcom-geni: fix error return code in geni_i2c_gpi_xfer
i2c: cadence: Fix regression with bus recovery
i2c: Restore initial power state if probe fails
i2c: npcm7xx: Fix error handling in npcm_i2c_init()
Pull dax fixes from Dan Williams:
"A few bug fixes around the handling of "Soft Reserved" memory and
memory tiering information.
Linux is starting to enounter more real world systems that deploy an
ACPI HMAT to describe different performance classes of memory, as well
the "special purpose" (Linux "Soft Reserved") designation from EFI.
These fixes result from that testing.
It has all appeared in -next for a while with no known issues.
- Fix duplicate overlapping device-dax instances for HMAT described
"Soft Reserved" Memory
- Fix missing node targets in the sysfs representation of memory
tiers
- Remove a confusing variable initialization"
* tag 'dax-fixes-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
device-dax: Fix duplicate 'hmem' device registration
ACPI: HMAT: Fix initiator registration for single-initiator systems
ACPI: HMAT: remove unnecessary variable initialization
Pull block fixes from Jens Axboe:
"Just a small NVMe merge for this week, fixing protection of the name
space list, and a missing clear of a reserved field when unused"
* tag 'block-6.1-2022-12-02' of git://git.kernel.dk/linux:
nvme: fix SRCU protection of nvme_ns_head list
nvme-pci: clear the prp2 field when not used
Pull pin control fixes from Linus Walleij:
"Three driver fixes. The Intel fix looks like the most important.
- Fix a potential divide by zero in pinctrl-singe (OMAP and
HiSilicon)
- Disable IRQs on startup in the Mediatek driver. This is a classic,
we should be looking out for this more.
- Save and restore pins in 'direct IRQ' mode in the Intel driver,
this works around firmware bugs"
* tag 'pinctrl-v6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: intel: Save and restore pins in "direct IRQ" mode
pinctrl: meditatek: Startup with the IRQs disabled
pinctrl: single: Fix potential division by zero
Pull RISC-V fixes from Palmer Dabbelt:
- build fix for the NR_CPUS Kconfig SBI version dependency
- fixes to early memory initialization, to fix page permissions in EFI
and post-initmem-free
- build fix for the VDSO, to avoid trying to profile the VDSO functions
- fixes for kexec crash handling, to fix multi-core and interrupt
related initialization inside the crash kernel
- fix for a race condition when handling multiple concurrect kernel
stack overflows
* tag 'riscv-for-linus-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: kexec: Fixup crash_smp_send_stop without multi cores
riscv: kexec: Fixup irq controller broken in kexec crash path
riscv: mm: Proper page permissions after initmem free
riscv: vdso: fix section overlapping under some conditions
riscv: fix race when vmap stack overflow
riscv: Sync efi page table's kernel mappings before switching
riscv: Fix NR_CPUS range conditions
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix ambiguous TRIM and DISCARD args
- Fix removal of debugfs file for mmc_test
MMC host:
- mtk-sd: Add missing clk_disable_unprepare() in an error path
- sdhci: Fix I/O voltage switch delay for UHS-I SD cards
- sdhci-esdhc-imx: Fix CQHCI exit halt state check
- sdhci-sprd: Fix voltage switch"
* tag 'mmc-v6.1-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-sprd: Fix no reset data and command after voltage switch
mmc: sdhci: Fix voltage switch delay
mmc: mtk-sd: Fix missing clk_disable_unprepare in msdc_of_clock_parse()
mmc: mmc_test: Fix removal of debugfs file
mmc: sdhci-esdhc-imx: correct CQHCI exit halt state check
mmc: core: Fix ambiguous TRIM and DISCARD arg
The "force" argument to write_spec_ctrl_current() is currently ambiguous
as it does not guarantee the MSR write. This is due to the optimization
that writes to the MSR happen only when the new value differs from the
cached value.
This is fine in most cases, but breaks for S3 resume when the cached MSR
value gets out of sync with the hardware MSR value due to S3 resetting
it.
When x86_spec_ctrl_current is same as x86_spec_ctrl_base, the MSR write
is skipped. Which results in SPEC_CTRL mitigations not getting restored.
Move the MSR write from write_spec_ctrl_current() to a new function that
unconditionally writes to the MSR. Update the callers accordingly and
rename functions.
[ bp: Rework a bit. ]
Fixes: caa0ff24d5 ("x86/bugs: Keep a per-CPU IA32_SPEC_CTRL value")
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/806d39b0bfec2fe8f50dc5446dff20f5bb24a959.1669821572.git.pawan.kumar.gupta@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull sound fixes from Takashi Iwai:
"Likely the last piece for 6.1; the only significant fixes are ASoC
core ops fixes, while others are device-specific (rather minor) fixes
in ASoC and FireWire drivers.
All appear safe enough to take as a late stage material"
* tag 'sound-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: dice: fix regression for Lexicon I-ONIX FW810S
ASoC: cs42l51: Correct PGA Volume minimum value
ASoC: ops: Correct bounds check for second channel on SX controls
ASoC: tlv320adc3xxx: Fix build error for implicit function declaration
ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx()
ASoC: ops: Fix bounds check for _sx controls
ASoC: fsl_micfil: explicitly clear CHnF flags
ASoC: fsl_micfil: explicitly clear software reset bit
Pull drm fixes from Dave Airlie:
"Things do seem to have finally settled down, just four i915 and one
amdgpu this week. Probably won't have much for next week if you do
push rc8 out.
i915:
- Fix dram info readout
- Remove non-existent pipes from bigjoiner pipe mask
- Fix negative value passed as remaining time
- Never return 0 if not all requests retired
amdgpu:
- VCN fix for vangogh"
* tag 'drm-fixes-2022-12-02' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: enable Vangogh VCN indirect sram mode
drm/i915: Never return 0 if not all requests retired
drm/i915: Fix negative value passed as remaining time
drm/i915: Remove non-existent pipes from bigjoiner pipe mask
drm/i915/mtl: Fix dram info readout
Pull misc hotfixes from Andrew Morton:
"15 hotfixes, 11 marked cc:stable.
Only three or four of the latter address post-6.0 issues, which is
hopefully a sign that things are converging"
* tag 'mm-hotfixes-stable-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
revert "kbuild: fix -Wimplicit-function-declaration in license_is_gpl_compatible"
Kconfig.debug: provide a little extra FRAME_WARN leeway when KASAN is enabled
drm/amdgpu: temporarily disable broken Clang builds due to blown stack-frame
mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths
mm/khugepaged: fix GUP-fast interaction by sending IPI
mm/khugepaged: take the right locks for page table retraction
mm: migrate: fix THP's mapcount on isolation
mm: introduce arch_has_hw_nonleaf_pmd_young()
mm: add dummy pmd_young() for architectures not having it
mm/damon/sysfs: fix wrong empty schemes assumption under online tuning in damon_sysfs_set_schemes()
tools/vm/slabinfo-gnuplot: use "grep -E" instead of "egrep"
nilfs2: fix NULL pointer dereference in nilfs_palloc_commit_free_entry()
hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing
madvise: use zap_page_range_single for madvise dontneed
mm: replace VM_WARN_ON to pr_warn if the node is offline with __GFP_THISNODE
The V4L2_MEMORY_USERPTR interface is long deprecated and shouldn't be
used (and is discouraged for any modern v4l drivers). And Seth Jenkins
points out that the fallback to VM_PFNMAP/VM_IO is fundamentally racy
and dangerous.
Note that it's not even a case that should trigger, since any normal
user pointer logic ends up just using the pin_user_pages_fast() call
that does the proper page reference counting. That's not the problem
case, only if you try to use special device mappings do you have any
issues.
Normally I'd just remove this during the merge window, but since Seth
pointed out the problem cases, we really want to know as soon as
possible if there are actually any users of this odd special case of a
legacy interface. Neither Hans nor Mauro seem to think that such
mis-uses of the old legacy interface should exist. As Mauro says:
"See, V4L2 has actually 4 streaming APIs:
- Kernel-allocated mmap (usually referred simply as just mmap);
- USERPTR mmap;
- read();
- dmabuf;
The USERPTR is one of the oldest way to use it, coming from V4L
version 1 times, and by far the least used one"
And Hans chimed in on the USERPTR interface:
"To be honest, I wouldn't mind if it goes away completely, but that's a
bit of a pipe dream right now"
but while removing this legacy interface entirely may be a pipe dream we
can at least try to remove the unlikely (and actively broken) case of
using special device mappings for USERPTR accesses.
This replaces it with a WARN_ONCE() that we can remove once we've
hopefully confirmed that no actual users exist.
NOTE! Longer term, this means that a 'struct frame_vector' only ever
contains proper page pointers, and all the games we have with converting
them to pages can go away (grep for 'frame_vector_to_pages()' and the
uses of 'vec->is_pfns'). But this is just the first step, to verify
that this code really is all dead, and do so as quickly as possible.
Reported-by: Seth Jenkins <sethjenkins@google.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.1
- fix SRCU protection of nvme_ns_head list (Caleb Sander)
- clear the prp2 field when not used (Lei Rao)"
* tag 'nvme-6.1-2022-01-02' of git://git.infradead.org/nvme:
nvme: fix SRCU protection of nvme_ns_head list
nvme-pci: clear the prp2 field when not used
