Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and Bluetooth.
We're reverting the removal of a Sundance driver, a user has appeared.
This makes the PR rather large in terms of LoC.
There's a conspicuous absence of real, user-reported 6.17 issues.
Slightly worried that the summer distracted people from testing.
Previous releases - regressions:
- ax25: properly unshare skbs in ax25_kiss_rcv()
Previous releases - always broken:
- phylink: disable autoneg for interfaces that have no inband, fix
regression on pcs-lynx (NXP LS1088)
- vxlan: fix null-deref when using nexthop objects
- batman-adv: fix OOB read/write in network-coding decode
- icmp: icmp_ndo_send: fix reversing address translation for replies
- tcp: fix socket ref leak in TCP-AO failure handling for IPv6
- mctp:
- mctp_fraq_queue should take ownership of passed skb
- usb: initialise mac header in RX path, avoid WARN
- wifi: mac80211: do not permit 40 MHz EHT operation on 5/6 GHz,
respect device limitations
- wifi: wilc1000: avoid buffer overflow in WID string configuration
- wifi: mt76:
- fix regressions from mt7996 MLO support rework
- fix offchannel handling issues on mt7996
- fix multiple wcid linked list corruption issues
- mt7921: don't disconnect when AP requests switch to a channel
which requires radar detection
- mt7925u: use connac3 tx aggr check in tx complete
- wifi: intel:
- improve validation of ACPI DSM data
- cfg: restore some 1000 series configs
- wifi: ath:
- ath11k: a fix for GTK rekeying
- ath12k: a missed WiFi7 capability (multi-link EMLSR)
- eth: intel:
- ice: fix races in "low latency" firmware interface for Tx timestamps
- idpf: set mac type when adding and removing MAC filters
- i40e: remove racy read access to some debugfs files
Misc:
- Revert "eth: remove the DLink/Sundance (ST201) driver"
- netfilter: conntrack: helper: Replace -EEXIST by -EBUSY, avoid
confusing modprobe"
* tag 'net-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
phy: mscc: Stop taking ts_lock for tx_queue and use its own lock
selftest: net: Fix weird setsockopt() in bind_bhash.c.
MAINTAINERS: add Sabrina to TLS maintainers
gve: update MAINTAINERS
ppp: fix memory leak in pad_compress_skb
net: xilinx: axienet: Add error handling for RX metadata pointer retrieval
net: atm: fix memory leak in atm_register_sysfs when device_register fail
netfilter: nf_tables: Introduce NFTA_DEVICE_PREFIX
selftests: netfilter: fix udpclash tool hang
ax25: properly unshare skbs in ax25_kiss_rcv()
mctp: return -ENOPROTOOPT for unknown getsockopt options
net/smc: Remove validation of reserved bits in CLC Decline message
ipv4: Fix NULL vs error pointer check in inet_blackhole_dev_init()
net: thunder_bgx: decrement cleanup index before use
net: thunder_bgx: add a missing of_node_put
net: phylink: move PHY interrupt request to non-fail path
net: lockless sock_i_ino()
tools: ynl-gen: fix nested array counting
wifi: wilc1000: avoid buffer overflow in WID string configuration
wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result()
...
Pull SoC fixes from Arnd Bergmann:
"These are mainly devicetree fixes for the rockchip and nxp platforms
on arm64, addressing mistakes in the board and soc specific
descriptions.
In particular the newly added Rock 5T board required multiple bugfixes
for PCIe and USB, while on the i.MX platform there are a number of
regulator related fixes. The only other platforms with devicetree
fixes are at91 with a fixup for SD/MMC and a change to enable all the
available UARTS on the Axiado reference board.
Also on the at91 platform, a Kconfig change addresses a regression
that stopped the DMA engine from working in 6.17-rc.
Three drivers each have a simple bugfix, stopping incorrect behavior
in op-tee firmware, the tee subsystem and the qualcomm mdt_loader.
Two trivial MAINTAINERS file changes are needed to make sure that
patches reach the correct maintainer, but don't change the actual
responsibilities"
* tag 'soc-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits)
ARM: dts: microchip: sama7d65: Force SDMMC Legacy mode
ARM: at91: select ARCH_MICROCHIP
arm64: dts: rockchip: fix second M.2 slot on ROCK 5T
arm64: dts: rockchip: fix USB on RADXA ROCK 5T
MAINTAINERS: exclude defconfig from ARM64 PORT
arm64: dts: axiado: Add missing UART aliases
MAINTAINERS: Update Nobuhiro Iwamatsu's email address
arm64: dts: rockchip: Add vcc-supply to SPI flash on Pinephone Pro
arm64: dts: rockchip: fix es8388 address on rk3588s-roc-pc
arm64: dts: rockchip: Fix Bluetooth interrupts flag on Neardi LBA3368
arm64: dts: rockchip: correct network description on Sige5
arm64: dts: rockchip: Minor whitespace cleanup
ARM: dts: rockchip: Minor whitespace cleanup
arm64: dts: rockchip: Add supplies for eMMC on rk3588-orangepi-5
arm64: dts: rockchip: Fix the headphone detection on the orangepi 5 plus
arm64: dts: imx95: Fix JPEG encoder node assigned clock
arm64: dts: imx95-19x19-evk: correct the phy setting for flexcan1/2
arm64: dts: imx8mp: Fix missing microSD slot vqmmc on Data Modul i.MX8M Plus eDM SBC
arm64: dts: imx8mp: Fix missing microSD slot vqmmc on DH electronics i.MX8M Plus DHCOM
arm64: dts: imx8mp-tqma8mpql: remove virtual 3.3V regulator
...
Microchip AT91 fixes for v6.17
This update includes:
- adaptation to the SDHCI capabilities on sama7d65 curiosity board DT as
SDHCI quirks are not in place yet. SD/MMC don't work without these
- addition of one Kconfig symbol that is already used in DMA tree for
6.17. XDMA cannot be selected if not present.
* tag 'at91-fixes-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama7d65: Force SDMMC Legacy mode
ARM: at91: select ARCH_MICROCHIP
Link: https://lore.kernel.org/r/20250903173403.113604-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The newly added Rock 5T board needed slightly bigger fixes to make the
PCIe and USB actually work, because the PCIe does share its lanes between
two ports and the usb needs to toggle a gpio to supply power.
The other interesting fix is the headphone detection on the Orange Pi 5+.
The rest are some added supplies to make the boot log less scary and a
number of styling fixes.
* tag 'v6.17-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: fix second M.2 slot on ROCK 5T
arm64: dts: rockchip: fix USB on RADXA ROCK 5T
arm64: dts: rockchip: Add vcc-supply to SPI flash on Pinephone Pro
arm64: dts: rockchip: fix es8388 address on rk3588s-roc-pc
arm64: dts: rockchip: Fix Bluetooth interrupts flag on Neardi LBA3368
arm64: dts: rockchip: correct network description on Sige5
arm64: dts: rockchip: Minor whitespace cleanup
ARM: dts: rockchip: Minor whitespace cleanup
arm64: dts: rockchip: Add supplies for eMMC on rk3588-orangepi-5
arm64: dts: rockchip: Fix the headphone detection on the orangepi 5 plus
arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3399-pinebook-pro
arm64: dts: rockchip: mark eeprom as read-only for Radxa E52C
Link: https://lore.kernel.org/r/5909239.Y6S9NjorxK@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This reverts commit 8401a108a6.
I got a report from an (anonymous) Sundance user:
Ethernet controller: Sundance Technology Inc / IC Plus Corp IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY (rev 31)
Revert the driver back in. Make following changes:
- update Denis's email address in MAINTAINERS
- adjust to timer API renames:
- del_timer_sync() -> timer_delete_sync()
- from_timer() -> timer_container_of()
Fixes: 8401a108a6 ("eth: remove the DLink/Sundance (ST201) driver")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250901210818.1025316-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull misc fixes from Andrew Morton:
"17 hotfixes. 13 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels. 11 of these
fixes are for MM.
This includes a three-patch series from Harry Yoo which fixes an
intermittent boot failure which can occur on x86 systems. And a
two-patch series from Alexander Gordeev which fixes a KASAN crash on
S390 systems"
* tag 'mm-hotfixes-stable-2025-09-01-17-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: fix possible deadlock in kmemleak
x86/mm/64: define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings()
mm: introduce and use {pgd,p4d}_populate_kernel()
mm: move page table sync declarations to linux/pgtable.h
proc: fix missing pde_set_flags() for net proc files
mm: fix accounting of memmap pages
mm/damon/core: prevent unnecessary overflow in damos_set_effective_quota()
kexec: add KEXEC_FILE_NO_CMA as a legal flag
kasan: fix GCC mem-intrinsic prefix with sw tags
mm/kasan: avoid lazy MMU mode hazards
mm/kasan: fix vmalloc shadow memory (de-)population races
kunit: kasan_test: disable fortify string checker on kasan_strings() test
selftests/mm: fix FORCE_READ to read input value correctly
mm/userfaultfd: fix kmap_local LIFO ordering for CONFIG_HIGHPTE
ocfs2: prevent release journal inode after journal shutdown
rust: mm: mark VmaNew as transparent
of_numa: fix uninitialized memory nodes causing kernel panic
Axiado AX3000 EVK has total of 4 UART ports. Add missing alias for uart0,
uart1, uart2.
This fixes the probe failures on the remaining UARTs.
Fixes: 1f70557790 ("arm64: dts: axiado: Add initial support for AX3000 SoC and eval board")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Harshit Shah <hshah@axiado.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull x86 fixes from Borislav Petkov:
- Convert the SSB mitigation to the attack vector controls which got
forgotten at the time
- Prevent the CPUID topology hierarchy detection on AMD from
overwriting the correct initial APIC ID
- Fix the case of a machine shipping without microcode in the BIOS, in
the AMD microcode loader
- Correct the Pentium 4 model range which has a constant TSC
* tag 'x86_urgent_for_v6.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Add attack vector controls for SSB
x86/cpu/topology: Use initial APIC ID from XTOPOLOGY leaf on AMD/HYGON
x86/microcode/AMD: Handle the case of no BIOS microcode
x86/cpu/intel: Fix the constant_tsc model check for Pentium 4
Pull hardening fixes from Kees Cook:
- ARM: stacktrace: include asm/sections.h in asm/stacktrace.h (Arnd
Bergmann)
- ubsan: Fix incorrect hand-side used in handle (Junhui Pei)
- hardening: Require clang 20.1.0 for __counted_by (Nathan Chancellor)
* tag 'hardening-v6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
hardening: Require clang 20.1.0 for __counted_by
ARM: stacktrace: include asm/sections.h in asm/stacktrace.h
ubsan: Fix incorrect hand-side used in handle
Pull arm64 fixes from Catalin Marinas:
- CFI failure due to kpti_ng_pgd_alloc() signature mismatch
- Underallocation bug in the SVE ptrace kselftest
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
kselftest/arm64: Don't open code SVE_PT_SIZE() in fp-ptrace
arm64: mm: Fix CFI failure due to kpti_ng_pgd_alloc function signature
Seen during KPTI initialization:
CFI failure at create_kpti_ng_temp_pgd+0x124/0xce8 (target: kpti_ng_pgd_alloc+0x0/0x14; expected type: 0xd61b88b6)
The call site is alloc_init_pud() at arch/arm64/mm/mmu.c:
pud_phys = pgtable_alloc(TABLE_PUD);
alloc_init_pud() has the prototype:
static void alloc_init_pud(p4d_t *p4dp, unsigned long addr, unsigned long end,
phys_addr_t phys, pgprot_t prot,
phys_addr_t (*pgtable_alloc)(enum pgtable_type),
int flags)
where the pgtable_alloc() prototype is declared.
The target (kpti_ng_pgd_alloc) is used in arch/arm64/kernel/cpufeature.c:
create_kpti_ng_temp_pgd(kpti_ng_temp_pgd, __pa(alloc), KPTI_NG_TEMP_VA,
PAGE_SIZE, PAGE_KERNEL, kpti_ng_pgd_alloc, 0);
which is an alias for __create_pgd_mapping_locked() with prototype:
extern __alias(__create_pgd_mapping_locked)
void create_kpti_ng_temp_pgd(pgd_t *pgdir, phys_addr_t phys,
unsigned long virt,
phys_addr_t size, pgprot_t prot,
phys_addr_t (*pgtable_alloc)(enum pgtable_type),
int flags);
__create_pgd_mapping_locked() passes the function pointer down:
__create_pgd_mapping_locked() -> alloc_init_p4d() -> alloc_init_pud()
But the target function (kpti_ng_pgd_alloc) has the wrong signature:
static phys_addr_t __init kpti_ng_pgd_alloc(int shift);
The "int" should be "enum pgtable_type".
To make "enum pgtable_type" available to cpufeature.c, move
enum pgtable_type definition from arch/arm64/mm/mmu.c to
arch/arm64/include/asm/mmu.h.
Adjust kpti_ng_pgd_alloc to use "enum pgtable_type" instead of "int".
The function behavior remains identical (parameter is unused).
Fixes: c64f46ee13 ("arm64: mm: use enum to identify pgtable level instead of *_SHIFT")
Cc: <stable@vger.kernel.org> # 6.16.x
Signed-off-by: Kees Cook <kees@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250829190721.it.373-kees@kernel.org
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Correctly handle 'invariant' system registers for protected VMs
- Improved handling of VNCR data aborts, including external aborts
- Fixes for handling of FEAT_RAS for NV guests, providing a sane
fault context during SEA injection and preventing the use of
RASv1p1 fault injection hardware
- Ensure that page table destruction when a VM is destroyed gives an
opportunity to reschedule
- Large fix to KVM's infrastructure for managing guest context loaded
on the CPU, addressing issues where the output of AT emulation
doesn't get reflected to the guest
- Fix AT S12 emulation to actually perform stage-2 translation when
necessary
- Avoid attempting vLPI irqbypass when GICv4 has been explicitly
disabled for a VM
- Minor KVM + selftest fixes
RISC-V:
- Fix pte settings within kvm_riscv_gstage_ioremap()
- Fix comments in kvm_riscv_check_vcpu_requests()
- Fix stack overrun when setting vlenb via ONE_REG
x86:
- Use array_index_nospec() to sanitize the target vCPU ID when
handling PV IPIs and yields as the ID is guest-controlled.
- Drop a superfluous cpumask_empty() check when reclaiming SEV
memory, as the common case, by far, is that at least one CPU will
have entered the VM, and wbnoinvd_on_cpus_mask() will naturally
handle the rare case where the set of have_run_cpus is empty.
Selftests (not KVM):
- Rename the is_signed_type() macro in kselftest_harness.h to
is_signed_var() to fix a collision with linux/overflow.h. The
collision generates compiler warnings due to the two macros having
different meaning"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (29 commits)
KVM: arm64: nv: Fix ATS12 handling of single-stage translation
KVM: arm64: Remove __vcpu_{read,write}_sys_reg_{from,to}_cpu()
KVM: arm64: Fix vcpu_{read,write}_sys_reg() accessors
KVM: arm64: Simplify sysreg access on exception delivery
KVM: arm64: Check for SYSREGS_ON_CPU before accessing the 32bit state
RISC-V: KVM: fix stack overrun when loading vlenb
RISC-V: KVM: Correct kvm_riscv_check_vcpu_requests() comment
RISC-V: KVM: Fix pte settings within kvm_riscv_gstage_ioremap()
KVM: arm64: selftests: Sync ID_AA64MMFR3_EL1 in set_id_regs
KVM: arm64: Get rid of ARM64_FEATURE_MASK()
KVM: arm64: Make ID_AA64PFR1_EL1.RAS_frac writable
KVM: arm64: Make ID_AA64PFR0_EL1.RAS writable
KVM: arm64: Ignore HCR_EL2.FIEN set by L1 guest's EL2
KVM: arm64: Handle RASv1p1 registers
arm64: Add capability denoting FEAT_RASv1p1
KVM: arm64: Reschedule as needed when destroying the stage-2 page-tables
KVM: arm64: Split kvm_pgtable_stage2_destroy()
selftests: harness: Rename is_signed_type() to avoid collision with overflow.h
KVM: SEV: don't check have_run_cpus in sev_writeback_caches()
KVM: arm64: Correctly populate FAR_EL2 on nested SEA injection
...
Cross-merge networking fixes after downstream PR (net-6.17-rc4).
No conflicts.
Adjacent changes:
drivers/net/ethernet/intel/idpf/idpf_txrx.c
02614eee26 ("idpf: do not linearize big TSO packets")
6c4e684802 ("idpf: remove obsolete stashing code")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KVM/arm64 changes for 6.17, take #2
- Correctly handle 'invariant' system registers for protected VMs
- Improved handling of VNCR data aborts, including external aborts
- Fixes for handling of FEAT_RAS for NV guests, providing a sane
fault context during SEA injection and preventing the use of
RASv1p1 fault injection hardware
- Ensure that page table destruction when a VM is destroyed gives an
opportunity to reschedule
- Large fix to KVM's infrastructure for managing guest context loaded
on the CPU, addressing issues where the output of AT emulation
doesn't get reflected to the guest
- Fix AT S12 emulation to actually perform stage-2 translation when
necessary
- Avoid attempting vLPI irqbypass when GICv4 has been explicitly
disabled for a VM
- Minor KVM + selftest fixes
KVM/riscv fixes for 6.17, take #1
- Fix pte settings within kvm_riscv_gstage_ioremap()
- Fix comments in kvm_riscv_check_vcpu_requests()
- Fix stack overrun when setting vlenb via ONE_REG
Pull powerpc fixes from Madhavan Srinivasan:
- Merge two CONFIG_POWERPC64_CPU entries in Kconfig.cputype
- Replace extra-y to always-y in Makefile
- Cleanup to use dev_fwnode helper
- Fix misleading comment in kvmppc_prepare_to_enter()
- misc cleanup and fixes
Thanks to Amit Machhiwal, Andrew Donnellan, Christophe Leroy, Gautam
Menghani, Jiri Slaby (SUSE), Masahiro Yamada, Shrikanth Hegde, Stephen
Rothwell, Venkat Rao Bagalkote, and Xichao Zhao
* tag 'powerpc-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/boot/install.sh: Fix shellcheck warnings
powerpc/prom_init: Fix shellcheck warnings
powerpc/kvm: Fix ifdef to remove build warning
powerpc: unify two CONFIG_POWERPC64_CPU entries in the same choice block
powerpc: use always-y instead of extra-y in Makefiles
powerpc/64: Drop unnecessary 'rc' variable
powerpc: Use dev_fwnode()
KVM: PPC: Fix misleading interrupts comment in kvmppc_prepare_to_enter()
Volodymyr reports that using a Xen DomU as a nested guest (where
HCR_EL2.E2H == 0), ATS12 results in a translation that stops at
the L2's S1, which isn't something you'd normally expects.
Comparing the code against the spec proves to be illuminating,
and suggests that the author of such code must have been tired,
cross-eyed, drunk, or maybe all of the above.
The gist of it is that, apart from HCR_EL2.VM or HCR_EL2.DC being
0, only the use of the EL2&0 translation regime limits the walk
to S1 only, and that we must finish the S2 walk in any other case.
Which solves the above issue, as E2H==0 indicates that ATS12 walks
the EL1&0 translation regime.
Explicitly checking for EL2&0 fixes this.
Reported-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: be04cebf3e ("KVM: arm64: nv: Add emulation of AT S12E{0,1}{R,W}")
Link: https://lore.kernel.org/r/20250806141707.3479194-2-volodymyr_babchuk@epam.com
Link: https://lore.kernel.org/r/20250809144811.2314038-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Volodymyr reports (again!) that under some circumstances (E2H==0,
walking S1 PTs), PAR_EL1 doesn't report the value of the latest
walk in the CPU register, but that instead the value is written to
the backing store.
Further investigation indicates that the root cause of this is
that a group of registers (PAR_EL1, TPIDR*_EL{0,1}, the *32_EL2 dregs)
should always be considered as "on CPU", as they are not remapped
between EL1 and EL2.
We fail to treat them accordingly, and end-up considering that
the register (PAR_EL1 in this example) should be written to memory
instead of in the register.
While it would be possible to quickly work around it, it is obvious
that the way we track these things at the moment is pretty horrible,
and could do with some improvement.
Revamp the whole thing by:
- defining a location for a register (memory, cpu), potentially
depending on the state of the vcpu
- define a transformation for this register (mapped register, potential
translation, special register needing some particular attention)
- convey this information in a structure that can be easily passed
around
As a result, the accessors themselves become much simpler, as the
state is explicit instead of being driven by hard-to-understand
conventions.
We get rid of the "pure EL2 register" notion, which wasn't very
useful, and add sanitisation of the values by applying the RESx
masks as required, something that was missing so far.
And of course, we add the missing registers to the list, with the
indication that they are always loaded.
Reported-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: fedc612314 ("KVM: arm64: nv: Handle virtual EL2 registers in vcpu_read/write_sys_reg()")
Link: https://lore.kernel.org/r/20250806141707.3479194-3-volodymyr_babchuk@epam.com
Link: https://lore.kernel.org/r/20250817121926.217900-4-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Distinguishing between NV and VHE is slightly pointless, and only
serves as an extra complication, or a way to introduce bugs, such
as the way SPSR_EL1 gets written without checking for the state
being resident.
Get rid if this silly distinction, and fix the bug in one go.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250817121926.217900-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Attack vector controls for SSB were missed in the initial attack vector series.
The default mitigation for SSB requires user-space opt-in so it is only
relevant for user->user attacks. Check with attack vector controls when
the command is auto - i.e., no explicit user selection has been done.
Fixes: 2d31d28746 ("x86/bugs: Define attack vectors relevant for each bug")
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250819192200.2003074-5-david.kaplan@amd.com
Prior to the topology parsing rewrite and the switchover to the new parsing
logic for AMD processors in
c749ce393b ("x86/cpu: Use common topology code for AMD"),
the initial_apicid on these platforms was:
- First initialized to the LocalApicId from CPUID leaf 0x1 EBX[31:24].
- Then overwritten by the ExtendedLocalApicId in CPUID leaf 0xb
EDX[31:0] on processors that supported topoext.
With the new parsing flow introduced in
f7fb3b2dd9 ("x86/cpu: Provide an AMD/HYGON specific topology parser"),
parse_8000_001e() now unconditionally overwrites the initial_apicid already
parsed during cpu_parse_topology_ext().
Although this has not been a problem on baremetal platforms, on virtualized AMD
guests that feature more than 255 cores, QEMU zeros out the CPUID leaf
0x8000001e on CPUs with CoreID > 255 to prevent collision of these IDs in
EBX[7:0] which can only represent a maximum of 255 cores [1].
This results in the following FW_BUG being logged when booting a guest
with more than 255 cores:
[Firmware Bug]: CPU 512: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0200
AMD64 Architecture Programmer's Manual Volume 2: System Programming Pub.
24593 Rev. 3.42 [2] Section 16.12 "x2APIC_ID" mentions the Extended
Enumeration leaf 0xb (Fn0000_000B_EDX[31:0])(which was later superseded by the
extended leaf 0x80000026) provides the full x2APIC ID under all circumstances
unlike the one reported by CPUID leaf 0x8000001e EAX which depends on the mode
in which APIC is configured.
Rely on the APIC ID parsed during cpu_parse_topology_ext() from CPUID leaf
0x80000026 or 0xb and only use the APIC ID from leaf 0x8000001e if
cpu_parse_topology_ext() failed (has_topoext is false).
On platforms that support the 0xb leaf (Zen2 or later, AMD guests on
QEMU) or the extended leaf 0x80000026 (Zen4 or later), the
initial_apicid is now set to the value parsed from EDX[31:0].
On older AMD/Hygon platforms that do not support the 0xb leaf but support the
TOPOEXT extension (families 0x15, 0x16, 0x17[Zen1], and Hygon), retain current
behavior where the initial_apicid is set using the 0x8000001e leaf.
Issue debugged by Naveen N Rao (AMD) <naveen@kernel.org> and Sairaj Kodilkar
<sarunkod@amd.com>.
[ bp: Massage commit message. ]
Fixes: c749ce393b ("x86/cpu: Use common topology code for AMD")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Naveen N Rao (AMD) <naveen@kernel.org>
Cc: stable@vger.kernel.org
Link: https://github.com/qemu/qemu/commit/35ac5dfbcaa4b [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 [2]
Link: https://lore.kernel.org/20250825075732.10694-2-kprateek.nayak@amd.com
Machines can be shipped without any microcode in the BIOS. Which means,
the microcode patch revision is 0.
Handle that gracefully.
Fixes: 94838d230a ("x86/microcode/AMD: Use the family,model,stepping encoded in the patch ID")
Reported-by: Vítek Vávra <vit.vavra.kh@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
KVM x86 fixes and a selftest fix for 6.17-rcN
- Use array_index_nospec() to sanitize the target vCPU ID when handling PV
IPIs and yields as the ID is guest-controlled.
- Drop a superfluous cpumask_empty() check when reclaiming SEV memory, as
the common case, by far, is that at least one CPU will have entered the
VM, and wbnoinvd_on_cpus_mask() will naturally handle the rare case where
the set of have_run_cpus is empty.
- Rename the is_signed_type() macro in kselftest_harness.h to is_signed_var()
to fix a collision with linux/overflow.h. The collision generates compiler
warnings due to the two macros having different implementations.
We have only two users of fixed_phy_add(), both use address 0 and
ignore the return value. So simplify fixed_phy_add() accordingly.
Whilst at it, constify the fixed_phy_status configs.
Note:
fixed_phy_add() is a legacy function which shouldn't be used in new
code, as it's use may be problematic:
- No check whether a fixed phy exists already at the given address
- If fixed_phy_register() is called afterwards by any other driver,
then it will also use phy_addr 0, because fixed_phy_add() ignores
the ida which manages address assignment
Drivers using a fixed phy created by fixed_phy_add() in platform code,
should dynamically create a fixed phy with fixed_phy_register()
instead.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/762700e5-a0b1-41af-aa03-929822a39475@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pentium 4's which are INTEL_P4_PRESCOTT (model 0x03) and later have
a constant TSC. This was correctly captured until commit fadb6f569b
("x86/cpu/intel: Limit the non-architectural constant_tsc model checks").
In that commit, an error was introduced while selecting the last P4
model (0x06) as the upper bound. Model 0x06 was transposed to
INTEL_P4_WILLAMETTE, which is just plain wrong. That was presumably a
simple typo, probably just copying and pasting the wrong P4 model.
Fix the constant TSC logic to cover all later P4 models. End at
INTEL_P4_CEDARMILL which accurately corresponds to the last P4 model.
Fixes: fadb6f569b ("x86/cpu/intel: Limit the non-architectural constant_tsc model checks")
Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250816065126.5000-1-suchitkarunakaran%40gmail.com
The recent kstack erase changes appear to have uncovered an existing
issue with a missing header inclusion:
In file included from drivers/misc/lkdtm/kstack_erase.c:12:
In file included from include/linux/kstack_erase.h:16:
arch/arm/include/asm/stacktrace.h:48:21: error: call to undeclared function 'in_entry_text'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
48 | frame->ex_frame = in_entry_text(frame->pc);
| ^
Include asm/sections.h here so the compiler can see the in_entry_text()
declaration.
Fixes: 752ec621ef ("ARM: 9234/1: stacktrace: Avoid duplicate saving of exception PC value")
Cc: Kees Cook <kees@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250807071902.4077714-1-arnd@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Currently, kvm_riscv_gstage_ioremap() is used to map IMSIC gpa to the
spa of IMSIC guest interrupt file.
The PAGE_KERNEL_IO property includes global setting whereas it does not
include user mode settings, so when accessing the IMSIC address in the
virtual machine, a guest page fault will occur, this is not expected.
According to the RISC-V Privileged Architecture Spec, for G-stage address
translation, all memory accesses are considered to be user-level accesses
as though executed in U-mode.
Fixes: 659ad6d82c ("RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap()")
Signed-off-by: Fangyu Yu <fangyu.yu@linux.alibaba.com>
Reviewed-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Link: https://lore.kernel.org/r/20250807070729.89701-1-fangyu.yu@linux.alibaba.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Pull x86 fixes from Borislav Petkov:
- Fix the GDS mitigation detection on some machines after the recent
attack vectors conversion
- Filter out the invalid machine reset reason value -1 when running as
a guest as in such cases the reason why the machine was rebooted does
not make a whole lot of sense
- Init the resource control machinery on Hygon hw in order to avoid a
division by zero and to actually enable the feature on hw which
supports it
* tag 'x86_urgent_for_v6.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Fix GDS mitigation selecting when mitigation is off
x86/CPU/AMD: Ignore invalid reset reason value
x86/cpu/hygon: Add missing resctrl_cpu_detect() in bsp_init helper
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE.
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
Fixes: 7b4a8097e5 ("arm64: dts: rockchip: Add Neardi LBA3368 board")
Cc: stable+noautosel@kernel.org # Needs testing, because actual level is just a guess
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-By: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20250818090445.28112-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Bindig requires a node name matching ‘^ethernet@[0-9a-f]+$’. This patch
changes the clock name from “etop” to “ethernet”.
This fixes the following warning:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): $nodename:0: 'etop@e180000' does not match '^ethernet@[0-9a-f]+$'
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
Fixes: dac0bad937 ("dt-bindings: net: lantiq,etop-xway: Document Lantiq Xway ETOP bindings")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Jakub Kicinski <kuba@kernel.org>
The upstream dts lacks the lantiq,{rx/tx}-burst-length property. Other
issues were also fixed:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'interrupt-names' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'lantiq,tx-burst-length' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'lantiq,rx-burst-length' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
Fixes: 14d4e308e0 ("net: lantiq: configure the burst length in ethernet drivers")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Jakub Kicinski <kuba@kernel.org>
