igt_check_plane_state test crashes in drm_atomic_helper_check_plane_state
when trying to de-reference drm_plane_state->plane->dev
due to the lack of a struct drm_plane in the mock struct drm_plane_state.
Since drm_plane_state always should contain a plane, the mock also
needs a plane to be the test more robust and realistic. Add it.
Signed-off-by: Claudio Suarez <cssk@net-c.es>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YaiWvQESctDMipjh@gineta.localdomain
eDP 1.4 adds a table of link rates supported by the sink to DPCD, as
well as a LINK_RATE_SET register to select between the entries in it.
If present, we will use this data to generate our internal link rate
table rather than using the standard list based on MAX_LINK_RATE.
Some recent laptops report MAX_LINK_RATE=0, and require this support.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/17
vmw_user_bo_lookup can fail to lookup user buffers, especially because
the buffer handles come from the userspace. The return value has
to be checked before the buffers are put back.
This was spotted by Dan's Smatch statick checker:
drivers/gpu/drm/vmwgfx/vmwgfx_bo.c:574 vmw_user_bo_synccpu_release()
error: uninitialized symbol 'vmw_bo'.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 8afa13a058 ("drm/vmwgfx: Implement DRIVER_GEM")
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215200224.3693345-1-zack@kde.org
Before the driver had screen targets support we had to disable explicit
bringup of its infrastructure because it was breaking screen objects
support.
Since the implementation of screen targets landed there hasn't been a
reason to explicitly disable it and the options were never used.
Remove of all that unused code.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: d80efd5cb3 ("drm/vmwgfx: Initial DX support")
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215184147.3688785-3-zack@kde.org
Old versions of the svga device used to export virtual vram, handling of
which was optimized on top of transparent hugepages support. Only very
old devices (OpenGL 2.1 support and earlier) used this code and at this
point performance differences are negligible.
Because the code requires very old hardware versions to run it has
been largely untested and unused for a long time.
Furthermore removal of the ttm hugepages support in:
commit 0d97950953 ("drm/ttm: remove ttm_bo_vm_insert_huge()")
broke the coherency mode in vmwgfx when running with hugepages.
Fixes: 0d97950953 ("drm/ttm: remove ttm_bo_vm_insert_huge()")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215184147.3688785-2-zack@kde.org
On i386 size_t is of course 32bits and using long int throws warnings,
trivially fix it by using the dedicated size_t format.
This is enough to fix the following warning found by the kernel test
robot:
drivers/gpu/drm/vmwgfx/vmwgfx_gem.c: In function 'vmw_bo_print_info':
>> drivers/gpu/drm/vmwgfx/vmwgfx_gem.c:230:33: warning: format '%ld'
expects argument of type 'long int', but argument 4 has type 'size_t'
{aka 'unsigned int'} [-Wformat=]
230 | seq_printf(m, "\t\t0x%08x: %12ld bytes %s, type = %s",
| ~~~~^
| |
| long int
| %12d
231 | id, bo->base.base.size, placement, type);
| ~~~~~~~~~~~~~~~~~~
| |
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 8afa13a058 ("drm/vmwgfx: Implement DRIVER_GEM")
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215184147.3688785-1-zack@kde.org
Backmerging for v5.16-rc5. Resolves a conflict between drm-misc-next
and drm-misc-fixes in the vc4 driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
I2C initialization is allowed to fail. In this case, create a connector
without DDC adapter. The current code would dereference a NULL pointer.
Reading the modes from the connector is supposed to work without I2C
adapter. Add the respective test.
v2:
* init edid to NULL to avoid uninitialized read (Dan)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211206091125.29501-2-tzimmermann@suse.de
Several DRM/KMS atomic commits can run in parallel if they affect
different CRTC. These commits share the global HVS state, so we have
some code to make sure we run commits in sequence. This synchronization
code is one of the first thing that runs in vc4_atomic_commit_tail().
Another constraints we have is that we need to make sure the HVS clock
gets a boost during the commit. That code relies on clk_set_min_rate and
will remove the old minimum and set a new one. We also need another,
temporary, minimum for the duration of the commit.
The algorithm is thus to set a temporary minimum, drop the previous
one, do the commit, and finally set the minimum for the current mode.
However, the part that sets the temporary minimum and drops the older
one runs before the commit synchronization code.
Thus, under the proper conditions, we can end up mixing up the minimums
and ending up with the wrong one for our current step.
To avoid it, let's move the clock setup in the protected section.
Fixes: d7d96c00e5 ("drm/vc4: hvs: Boost the core clock during modeset")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Tested-by: Jian-Hong Pan <jhp@endlessos.org>
[danvet: re-apply this from 0c980a006d ("drm/vc4: kms: Wait for the
commit before increasing our clock rate") because I lost that part in
my merge resolution in 99b03ca651 ("Merge v5.16-rc5 into drm-next")]
Fixes: 99b03ca651 ("Merge v5.16-rc5 into drm-next")
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://lore.kernel.org/r/20211117094527.146275-2-maxime@cerno.tech
There are a few details specific to the GETFB2 IOCTL.
It's not immediately clear how user-space should check for the
number of planes. Suggest using the handles field or the pitches
field.
The modifier array is filled with zeroes, ie. DRM_FORMAT_MOD_LINEAR.
So explicitly tell user-space to not look at it unless the flag is
set.
Changes in v2 (Daniel):
- Mention that handles should be used to compute the number of planes,
and only refer to pitches as a fallback.
- Reword bit about undefined modifier.
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211123112400.22245-1-contact@emersion.fr
Thomas Zimmermann requested a fixes backmerge, specifically also for
96c5f82ef0 ("drm/vc4: fix error code in vc4_create_object()")
Just a bunch of adjacent changes conflicts, even the big pile of them
in vc4.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.16-rc5. They include:
- gadget driver fixes for reported issues
- xhci fixes for reported problems.
- config endpoint parsing fixes for where we got bitfields wrong
Most of these have been in linux-next, the remaining few were not, but
got lots of local testing in my systems and in some cloud testing
infrastructures"
* tag 'usb-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: core: config: using bit mask instead of individual bits
usb: core: config: fix validation of wMaxPacketValue entries
USB: gadget: zero allocate endpoint 0 buffers
USB: gadget: detect too-big endpoint 0 requests
xhci: avoid race between disable slot command and host runtime suspend
xhci: Remove CONFIG_USB_DEFAULT_PERSIST to prevent xHCI from runtime suspending
Revert "usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default"
Pull char/misc driver fixes from Greg KH:
"Here are a bunch of small char/misc and other driver subsystem fixes.
Included in here are:
- iio driver fixes for reported problems
- phy driver fixes for a number of reported problems
- mhi resume bugfix for broken hardware
- nvmem driver fix
- rtsx driver fix for irq issues
- fastrpc packet parsing fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits)
bus: mhi: core: Add support for forced PM resume
iio: trigger: stm32-timer: fix MODULE_ALIAS
misc: rtsx: Avoid mangling IRQ during runtime PM
nvmem: eeprom: at25: fix FRAM byte_len
misc: fastrpc: fix improper packet size calculation
MAINTAINERS: add maintainer for Qualcomm FastRPC driver
bus: mhi: pci_generic: Fix device recovery failed issue
iio: adc: stm32: fix null pointer on defer_probe error
phy: HiSilicon: Fix copy and paste bug in error handling
dt-bindings: phy: zynqmp-psgtr: fix USB phy name
phy: ti: omap-usb2: Fix the kernel-doc style
phy: qualcomm: ipq806x-usb: Fix kernel-doc style
iio: at91-sama5d2: Fix incorrect sign extension
iio: adc: axp20x_adc: fix charging current reporting on AXP22x
iio: gyro: adxrs290: fix data signedness
phy: ti: tusb1210: Fix the kernel-doc warn
phy: qualcomm: usb-hsic: Fix the kernel-doc warn
phy: qualcomm: qmp: Add missing struct documentation
phy: mvebu-cp110-utmi: Fix kernel-doc warns
iio: ad7768-1: Call iio_trigger_notify_done() on error
...
Pull timer fixes from Thomas Gleixner:
"Two fixes for clock chip drivers:
- A regression fix for the Designware APB timer. A recent change to
the error checking code transformed the error condition wrongly so
it turned into a fail if good condition.
- Fix a clang build fail of the ARM architected timer driver"
* tag 'timers-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/arm_arch_timer: Force inlining of erratum_set_next_event_generic()
clocksource/drivers/dw_apb_timer_of: Fix probe failure
