SCMI v3.2 added support to set/get clock custom OEM types; such support is
conditionally present, though, depending on an extended config attribute
bit possibly advertised by the platform server on a per-domain base.
Add a check to verify if OEM types are supported before allowing any kind
of OEM-specific get/set operation. Also add a check around all the new
v3.2 clock features.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240214183006.3403207-4-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Freshly introduced NEGOTIATE_PROTOCOL_VERSION allows the agent to ascertain
upfront if a specific protocol(usually older) version is supported by the
platform.
It is used by the agent in case the platform has advertised the support of
a newer protocol version than the latest version supported by the agent,
since backward compatibility cannot be automatically assumed.
Emit a warning about possible incompatibility when negotiation was not
possible or just print the successfully negotiated protocol.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240214183006.3403207-3-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Extend the perf notification report to include pre-calculated frequencies
corresponding to the reported limits/levels event; such frequencies are
properly computed based on the stored known OPPs information taking into
consideration if the current operating mode is level indexed or not.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240212123233.1230090-12-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a preliminary check to verify if the powercap protocol related notify
enable commands are supported at all by the SCMI platform, and then
provide the callback needed to allow the core SCMI notification
subsytem to do a fine-grain check if a specific resource domain
supports notifications.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240212123233.1230090-10-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a preliminary check to verify if the reset protocol related notify
enable commands are supported at all by the SCMI platform, and then
provide the callback needed to allow the core SCMI notification
subsytem to do a fine-grain check if a specific resource domain
supports notifications.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240212123233.1230090-9-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a preliminary check to verify if the sensor protocol related notify
enable commands are supported at all by the SCMI platform, and then
provide the callback needed to allow the core SCMI notification
subsytem to do a fine-grain check if a specific resource domain
supports notifications.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240212123233.1230090-8-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a preliminary check to verify if the clock protocol related notify
enable commands are supported at all by the SCMI platform, and then
provide the callback needed to allow the core SCMI notification
subsytem to do a fine-grain check if a specific resource domain
supports notifications.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240212123233.1230090-7-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a preliminary check to verify if the system power protocol related
notify enable commands are supported at all by the SCMI platform, and
then provide the callback needed to allow the core SCMI notification
subsytem to do a fine-grain check if a specific resource domain supports
notifications.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240212123233.1230090-6-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a preliminary check to verify if the performance related notify
enable commands are supported at all by the SCMI platform, and then
provide the callback needed to allow the core SCMI notification
subsytem to do a fine-grain check if a specific resource domain
supports notifications.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240212123233.1230090-4-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When registering protocol events, use the optional .is_notify_supported
callback provided by the protocol to check if that specific notification
type is available for that particular resource on the running system,
marking it as unsupported otherwise.
Then, when a notification enable request is received, return an error if
it was previously marked as unsuppported, so avoiding to send a needless
notification enable command and check the returned value for failure.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240212123233.1230090-2-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When the generic SCMI code tears down a channel, it calls the chan_free
callback function, defined by each transport. Since multiple protocols
might share the same transport_info member, chan_free() might want to
clean up the same member multiple times within the given SCMI transport
implementation. In this case, it is SMC transport. This will lead to a NULL
pointer dereference at the second time:
| scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16
| arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
| arm-scmi firmware:scmi: unable to communicate with SCMI
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
| Mem abort info:
| ESR = 0x0000000096000004
| EC = 0x25: DABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| FSC = 0x04: level 0 translation fault
| Data abort info:
| ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
| CM = 0, WnR = 0, TnD = 0, TagAccess = 0
| GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
| user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881ef8000
| [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
| Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 4 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc2-00124-g455ef3d016c9-dirty #793
| Hardware name: FVP Base RevC (DT)
| pstate: 61400009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
| pc : smc_chan_free+0x3c/0x6c
| lr : smc_chan_free+0x3c/0x6c
| Call trace:
| smc_chan_free+0x3c/0x6c
| idr_for_each+0x68/0xf8
| scmi_cleanup_channels.isra.0+0x2c/0x58
| scmi_probe+0x434/0x734
| platform_probe+0x68/0xd8
| really_probe+0x110/0x27c
| __driver_probe_device+0x78/0x12c
| driver_probe_device+0x3c/0x118
| __driver_attach+0x74/0x128
| bus_for_each_dev+0x78/0xe0
| driver_attach+0x24/0x30
| bus_add_driver+0xe4/0x1e8
| driver_register+0x60/0x128
| __platform_driver_register+0x28/0x34
| scmi_driver_init+0x84/0xc0
| do_one_initcall+0x78/0x33c
| kernel_init_freeable+0x2b8/0x51c
| kernel_init+0x24/0x130
| ret_from_fork+0x10/0x20
| Code: f0004701 910a0021 aa1403e5 97b91c70 (b9400280)
| ---[ end trace 0000000000000000 ]---
Simply check for the struct pointer being NULL before trying to access
its members, to avoid this situation.
This was found when a transport doesn't really work (for instance no SMC
service), the probe routines then tries to clean up, and triggers a crash.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Fixes: 1dc6558062 ("firmware: arm_scmi: Add smc/hvc transport")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240126122325.2039669-1-andre.przywara@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
ARM SCMI v3.2 introduces clock get permission command. To implement the
same let us stash the values of those permissions in the scmi_clock_info.
They indicate if the operation is forbidden or not.
If the CLOCK_GET_PERMISSIONS command is not supported, the default
permissions are set to allow the operations, otherwise they will be set
according to the response of CLOCK_GET_PERMISSIONS from the SCMI
platform firmware.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240121110901.1414856-1-peng.fan@oss.nxp.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add the capability for a SCMI driver to register to the core SCMI stack
with multiple SCMI protocols. In such a case the SCMI driver probe
function will end up being called once for each registered protocol
which have been also found as implemented on the platform.
This is especially useful in testing scenarios.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20231221151129.325749-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When (sustained_freq_khz * 1000) is less than sustained_perf_level, the
multiplier will be less than 1 and hence rounded down as 0. Similarly if
it is not multiple of sustained_perf_level the dom_info->mult_factor will
contain rounded down value and will end up impacting all the frequency
calculations done using it.
Add warning if and when the domain frequency multiplier is 0 or rounded
down so that it gives a clue to get the firmware tables fixed.
Suggested-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240119152338.3047620-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The clock protocol version as per the SCMI v3.2 specification is 0x30000.
Enable the v3.0 clock protocol features only when clock protocol version
equals 0x30000.
The previous beta version of the spec had this value set to 0x20001 and
th same value trickled down from the initial development. The version
update were missed in the driver.
Fixes: e49e314a2c ("firmware: arm_scmi: Add clock v3.2 CONFIG_SET support")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240109150106.2066739-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
On reception of a completion interrupt the shared memory area is accessed
to retrieve the message header at first and then, if the message sequence
number identifies a transaction which is still pending, the related
payload is fetched too.
When an SCMI command times out the channel ownership remains with the
platform until eventually a late reply is received and, as a consequence,
any further transmission attempt remains pending, waiting for the channel
to be relinquished by the platform.
Once that late reply is received the channel ownership is given back
to the agent and any pending request is then allowed to proceed and
overwrite the SMT area of the just delivered late reply; then the wait
for the reply to the new request starts.
It has been observed that the spurious IRQ related to the late reply can
be wrongly associated with the freshly enqueued request: when that happens
the SCMI stack in-flight lookup procedure is fooled by the fact that the
message header now present in the SMT area is related to the new pending
transaction, even though the real reply has still to arrive.
This race-condition on the A2P channel can be detected by looking at the
channel status bits: a genuine reply from the platform will have set the
channel free bit before triggering the completion IRQ.
Add a consistency check to validate such condition in the A2P ISR.
Reported-by: Xinglong Yang <xinglong.yang@cixtech.com>
Closes: https://lore.kernel.org/all/PUZPR06MB54981E6FA00D82BFDBB864FBF08DA@PUZPR06MB5498.apcprd06.prod.outlook.com/
Fixes: 5c8a47a5a9 ("firmware: arm_scmi: Make scmi core independent of the transport type")
Cc: stable@vger.kernel.org # 5.15+
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Xinglong Yang <xinglong.yang@cixtech.com>
Link: https://lore.kernel.org/r/20231220172112.763539-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Pull more bcachefs updates from Kent Overstreet:
"Some fixes, Some refactoring, some minor features:
- Assorted prep work for disk space accounting rewrite
- BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
makes our trigger context more explicit
- A few fixes to avoid excessive transaction restarts on
multithreaded workloads: fstests (in addition to ktest tests) are
now checking slowpath counters, and that's shaking out a few bugs
- Assorted tracepoint improvements
- Starting to break up bcachefs_format.h and move on disk types so
they're with the code they belong to; this will make room to start
documenting the on disk format better.
- A few minor fixes"
* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
bcachefs: Improve inode_to_text()
bcachefs: logged_ops_format.h
bcachefs: reflink_format.h
bcachefs; extents_format.h
bcachefs: ec_format.h
bcachefs: subvolume_format.h
bcachefs: snapshot_format.h
bcachefs: alloc_background_format.h
bcachefs: xattr_format.h
bcachefs: dirent_format.h
bcachefs: inode_format.h
bcachefs; quota_format.h
bcachefs: sb-counters_format.h
bcachefs: counters.c -> sb-counters.c
bcachefs: comment bch_subvolume
bcachefs: bch_snapshot::btime
bcachefs: add missing __GFP_NOWARN
bcachefs: opts->compression can now also be applied in the background
bcachefs: Prep work for variable size btree node buffers
bcachefs: grab s_umount only if snapshotting
...
Pull timer updates from Thomas Gleixner:
"Updates for time and clocksources:
- A fix for the idle and iowait time accounting vs CPU hotplug.
The time is reset on CPU hotplug which makes the accumulated
systemwide time jump backwards.
- Assorted fixes and improvements for clocksource/event drivers"
* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
clocksource/drivers/ep93xx: Fix error handling during probe
clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
clocksource/timer-riscv: Add riscv_clock_shutdown callback
dt-bindings: timer: Add StarFive JH8100 clint
dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs
Pull powerpc fixes from Aneesh Kumar:
- Increase default stack size to 32KB for Book3S
Thanks to Michael Ellerman.
* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Increase default stack size to 32KB
Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
