The bq24190 power_supply class device has a writeable "charge_type"
property, add support for the new "charge_types" property. Reading this
returns a list of supported charge-types with the currently active type
surrounded by square brackets, allowing userspace to find out which
enum power_supply_charge_type values are supported.
This has been tested on a GPD win gaming-handheld.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241211174451.355421-4-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add a new "charge_types" property, this is identical to "charge_type" but
reading returns a list of supported charge-types with the currently active
type surrounded by square brackets, e.g.:
Fast [Standard] "Long_Life"
This has the advantage over the existing "charge_type" property that this
allows userspace to find out which charge-types are supported for writable
charge_type properties.
Drivers which already support "charge_type" can easily add support for
this by setting power_supply_desc.charge_types to a bitmask representing
valid charge_type values. The existing "charge_type" get_property() and
set_property() code paths can be re-used for "charge_types".
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241211174451.355421-3-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
When gpio-poweroff fails, a WARN_ON() is triggered without
an explanation to the user about the failure.
Add some comments explaining that the attempt to poweroff the system
via gpio-poweroff failed and convert it to a WARN() message with a
bit of context to provide some hint to the user.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20241212130456.580197-1-festevam@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Some enum style power-supply properties have text-values / labels for some
of the enum values containing a space, e.g. "Long Life" for
POWER_SUPPLY_CHARGE_TYPE_LONGLIFE.
Make power_supply_show_enum_with_available() replace these spaces with
'_' when showing the available text-values. After this the output for
a battery which supports "Long Life" will be e.g.:
Fast [Standard] Long_Life
or:
Fast Standard [Long_Life]
Modify power_supply_store_property() to accept both the original text-value
with space and the alternative value with the spaces replaced by '_'.
This allows users to write the value with '_' after seeing this on reading
the property.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241209204051.8786-2-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The psy core and drivers currently use dev_get_drvdata() to go from a
'struct device' to its 'struct power_supply'.
This is not typesafe and or documented.
Introduce a new helper to make this pattern explicit.
Instead of using dev_get_drvdata(), use container_of_const() which
also preserves the constness.
Furthermore 'dev' does need to be dereferenced anymore and at some point
the drvdata could be reused for something else.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241210-power-supply-dev_to_psy-v2-7-9d8c9d24cfe4@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Some parts may not have certain control bits. These bits
however may be non-essential to the system's operation,
as the default behaviour is the one we would set anyways,
or the bits are not applicable for said part (e. g. enabling
NTC on a part without an NTC pin, or one where it cannot
be disabled via registers anyways).
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20241119180741.2237692-5-csokas.bence@prolan.hu
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
If ADC read returns an error, the return value was silently ignored,
execution continued and an uninitialized value and a return code of 0
was passed back to userspace. The only exception was
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, which bailed out correctly.
Fix returns for the other cases as well.
Fixes: 75853406fa ("power: supply: Add a driver for Injoinic power bank ICs")
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20241119180741.2237692-2-csokas.bence@prolan.hu
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Currently an uevent contains the same string representation of a
property as sysfs. However for POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR this
is specially formatted to indicate all possible values.
This doesn't make sense for uevents and complicates parsing.
Instead only include the currently active value in uevents.
As currently no in-tree driver uses POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR
this change is not a problem.
Soon the property will actually be used so fix the formatting before
that happens.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241111-power-supply-extensions-v4-1-7240144daa8e@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the device lifecycle managed work init function. This helps prevent
mistakes like canceling out of order in cleanup functions and
forgetting to canceling on error paths.
Note we move this to after the registering the power supply so that
the cancel is called before unregistering.
This was the last thing the .remove() function did, so remove that too.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20241202211519.199635-5-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Pull i2c component probing support from Wolfram Sang:
"Add OF component probing.
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular
device can be detected by some firmware provided identifier, other
times that information is not available, and the kernel has to try to
probe each device.
Instead of a delicate dance between drivers and device tree quirks,
this change introduces a simple I2C component probe function. For a
given class of devices on the same I2C bus, it will go through all of
them, doing a simple I2C read transfer and see which one of them
responds. It will then enable the device that responds"
* tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: fix typo in I2C OF COMPONENT PROBER
of: base: Document prefix argument for of_get_next_child_with_prefix()
i2c: Fix whitespace style issue
arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
platform/chrome: Introduce device tree hardware prober
i2c: of-prober: Add GPIO support to simple helpers
i2c: of-prober: Add simple helpers for regulator support
i2c: Introduce OF component probe function
of: base: Add for_each_child_of_node_with_prefix()
of: dynamic: Add of_changeset_update_prop_string
