Pull tracing fixes from Steven Rostedt:
- Fix crash from bad histogram entry
An error path in the histogram creation could leave an entry in a
link list that gets freed. Then when a new entry is added it can
cause a u-a-f bug. This is fixed by restructuring the code so that
the histogram is consistent on failure and everything is cleaned up
appropriately.
- Fix fprobe self test
The fprobe self test relies on no function being attached by ftrace.
BPF programs can attach to functions via ftrace and systemd now does
so. This causes those functions to appear in the enabled_functions
list which holds all functions attached by ftrace. The selftest also
uses that file to see if functions are being connected correctly. It
counts the functions in the file, but if there's already functions in
the file, it fails. Instead, add the number of functions in the file
at the start of the test to all the calculations during the test.
- Fix potential division by zero of the function profiler stddev
The calculated divisor that calculates the standard deviation of the
function times can overflow. If the overflow happens to land on zero,
that can cause a division by zero. Check for zero from the
calculation before doing the division.
TODO: Catch when it ever overflows and report it accordingly. For
now, just prevent the system from crashing.
* tag 'trace-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Avoid potential division by zero in function_stat_show()
selftests/ftrace: Let fprobe test consider already enabled functions
tracing: Fix bad hist from corrupting named_triggers list
Pull block fixes from Jens Axboe:
- Fix plugging for native zone writes
- Fix segment limit settings for != 4K page size archs
- Fix for slab names overflowing
* tag 'block-6.14-20250228' of git://git.kernel.dk/linux:
block: fix 'kmem_cache of name 'bio-108' already exists'
block: Remove zone write plugs when handling native zone append writes
block: make segment size limit workable for > 4K PAGE_SIZE
Pull io_uring fix from Jens Axboe:
"Just a single fix headed for stable, ensuring that msg_control is
properly saved in compat mode as well"
* tag 'io_uring-6.14-20250228' of git://git.kernel.dk/linux:
io_uring/net: save msg_control for compat
Pull EFI fixes from Ard Biesheuvel:
"Another couple of EFI fixes for v6.14.
Only James's patch stands out, as it implements a workaround for odd
behavior in fwupd in user space, which creates EFI variables by
touching a file in efivarfs, clearing the immutable bit (which gets
set automatically for $reasons) and then opening it again for writing,
none of which is really necessary.
The fwupd author and LVFS maintainer is already rolling out a fix for
this on the fwupd side, and suggested that the workaround in this PR
could be backed out again during the next cycle.
(There is a semantic mismatch in efivarfs where some essential
variable attributes are stored in the first 4 bytes of the file, and
so zero length files cannot exist, as they cannot be written back to
the underlying variable store. So now, they are dropped once the last
reference is released.)
Summary:
- Fix CPER error record parsing bugs
- Fix a couple of efivarfs issues that were introduced in the merge
window
- Fix an issue in the early remapping code of the MOKvar table"
* tag 'efi-fixes-for-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/mokvar-table: Avoid repeated map/unmap of the same page
efi: Don't map the entire mokvar table to determine its size
efivarfs: allow creation of zero length files
efivarfs: Defer PM notifier registration until .fill_super
efi/cper: Fix cper_arm_ctx_info alignment
efi/cper: Fix cper_ia_proc_ctx alignment
Device mapper bioset often has big bio_slab size, which can be more than
1000, then 8byte can't hold the slab name any more, cause the kmem_cache
allocation warning of 'kmem_cache of name 'bio-108' already exists'.
Fix the warning by extending bio_slab->name to 12 bytes, but fix output
of /proc/slabinfo
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250228132656.2838008-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit <d74169ceb0d2> ("iommu/vt-d: Allocate DMAR fault interrupts
locally") moved the call to enable_drhd_fault_handling() to a code
path that does not hold any lock while traversing the drhd list. Fix
it by ensuring the dmar_global_lock lock is held when traversing the
drhd list.
Without this fix, the following warning is triggered:
=============================
WARNING: suspicious RCU usage
6.14.0-rc3 #55 Not tainted
-----------------------------
drivers/iommu/intel/dmar.c:2046 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 1
2 locks held by cpuhp/1/23:
#0: ffffffff84a67c50 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
#1: ffffffff84a6a380 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
stack backtrace:
CPU: 1 UID: 0 PID: 23 Comm: cpuhp/1 Not tainted 6.14.0-rc3 #55
Call Trace:
<TASK>
dump_stack_lvl+0xb7/0xd0
lockdep_rcu_suspicious+0x159/0x1f0
? __pfx_enable_drhd_fault_handling+0x10/0x10
enable_drhd_fault_handling+0x151/0x180
cpuhp_invoke_callback+0x1df/0x990
cpuhp_thread_fun+0x1ea/0x2c0
smpboot_thread_fn+0x1f5/0x2e0
? __pfx_smpboot_thread_fn+0x10/0x10
kthread+0x12a/0x2d0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x4a/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Holding the lock in enable_drhd_fault_handling() triggers a lockdep splat
about a possible deadlock between dmar_global_lock and cpu_hotplug_lock.
This is avoided by not holding dmar_global_lock when calling
iommu_device_register(), which initiates the device probe process.
Fixes: d74169ceb0 ("iommu/vt-d: Allocate DMAR fault interrupts locally")
Reported-and-tested-by: Ido Schimmel <idosch@nvidia.com>
Closes: https://lore.kernel.org/linux-iommu/Zx9OwdLIc_VoQ0-a@shredder.mtl.com/
Tested-by: Breno Leitao <leitao@debian.org>
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250218022422.2315082-1-baolu.lu@linux.intel.com
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When updating the page table root field on the DTE, avoid overwriting any
bits that are already set. The earlier call to make_clear_dte() writes
default values that all DTEs must have set (currently DTE[V]), and those
must be preserved.
Currently this doesn't cause problems since the page table root update is
the first field that is set after make_clear_dte() is called, and
DTE_FLAG_V is set again later along with the permission bits (IR/IW).
Remove this redundant assignment too.
Fixes: fd5dff9de4 ("iommu/amd: Modify set_dte_entry() to use 256-bit DTE helpers")
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250106191413.3107140-1-alejandro.j.jimenez@oracle.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pull drm fixes from Dave Airlie:
"This week's fixes pull, amdgpu mostly, with some xe and a few misc
others, the fb defio fix is bit of a change, but it avoids some nasty
NULL pointer crashes due to defio assuming page backing in places it
didn't have pages.
amdgpu:
- Legacy dpm suspend/resume fix
- Runtime PM fix for DELL G5 SE
- MAINTAINERS updates
- Enforce Isolation fixes
- mailmap update
- EDID reading i2c fix
- PSR fix
- eDP fix
- HPD interrupt handling fix
- Clear memory fix
amdkfd:
- MQD handling fix
vkms:
- fix rounding error
imagination:
- header fix
nouveau:
- connector status fix
fb/defio:
- NULL ptr fix for defio drivers
i915:
- Fix encoder HW state readout for DP UHBR MST
xe:
- OA uapi fix (Umesh)
- Userptr related fixes
- Remove a duplicated register entry
- Scheduler related fix to prevent exec races when freeing it"
* tag 'drm-fixes-2025-02-28' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
drm/fbdev-dma: Add shadow buffering for deferred I/O
drm/nouveau: Do not override forced connector status
drm/i915/dp_mst: Fix encoder HW state readout for UHBR MST
drm/xe: cancel pending job timer before freeing scheduler
drm/xe/regs: remove a duplicate definition for RING_CTL_SIZE(size)
drm/imagination: remove unnecessary header include path
drm/amdgpu: init return value in amdgpu_ttm_clear_buffer
drm/amd/display: Fix HPD after gpu reset
drm/amd/display: add a quirk to enable eDP0 on DP1
drm/amd/display: Disable PSR-SU on eDP panels
MAINTAINERS: Update AMDGPU DML maintainers info
drm/amd/display: restore edid reading from a given i2c adapter
mailmap: Add entry for Rodrigo Siqueira
MAINTAINERS: Change my role from Maintainer to Reviewer
drm/amdgpu/mes: keep enforce isolation up to date
drm/amdgpu/gfx: only call mes for enforce isolation if supported
MAINTAINERS: update amdgpu maintainers list
drm/amdgpu: disable BAR resize on Dell G5 SE
drm/amdkfd: Preserve cp_hqd_pq_control on update_mqd
amdgpu/pm/legacy: fix suspend/resume issues
...
The fprobe test fails on Fedora 41 since the fprobe test assumption that
the number of enabled_functions is zero before the test starts is not
necessarily true. Some user space tools, like systemd, add BPF programs
that attach to functions. Those will show up in the enabled_functions table
and must be taken into account by the fprobe test.
Therefore count the number of lines of enabled_functions before tests
start, and use that as base when comparing expected results.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250226142703.910860-1-hca@linux.ibm.com
Fixes: e85c5e9792 ("selftests/ftrace: Update fprobe test to check enabled_functions file")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The following commands causes a crash:
~# cd /sys/kernel/tracing/events/rcu/rcu_callback
~# echo 'hist:name=bad:keys=common_pid:onmax(bogus).save(common_pid)' > trigger
bash: echo: write error: Invalid argument
~# echo 'hist:name=bad:keys=common_pid' > trigger
Because the following occurs:
event_trigger_write() {
trigger_process_regex() {
event_hist_trigger_parse() {
data = event_trigger_alloc(..);
event_trigger_register(.., data) {
cmd_ops->reg(.., data, ..) [hist_register_trigger()] {
data->ops->init() [event_hist_trigger_init()] {
save_named_trigger(name, data) {
list_add(&data->named_list, &named_triggers);
}
}
}
}
ret = create_actions(); (return -EINVAL)
if (ret)
goto out_unreg;
[..]
ret = hist_trigger_enable(data, ...) {
list_add_tail_rcu(&data->list, &file->triggers); <<<---- SKIPPED!!! (this is important!)
[..]
out_unreg:
event_hist_unregister(.., data) {
cmd_ops->unreg(.., data, ..) [hist_unregister_trigger()] {
list_for_each_entry(iter, &file->triggers, list) {
if (!hist_trigger_match(data, iter, named_data, false)) <- never matches
continue;
[..]
test = iter;
}
if (test && test->ops->free) <<<-- test is NULL
test->ops->free(test) [event_hist_trigger_free()] {
[..]
if (data->name)
del_named_trigger(data) {
list_del(&data->named_list); <<<<-- NEVER gets removed!
}
}
}
}
[..]
kfree(data); <<<-- frees item but it is still on list
The next time a hist with name is registered, it causes an u-a-f bug and
the kernel can crash.
Move the code around such that if event_trigger_register() succeeds, the
next thing called is hist_trigger_enable() which adds it to the list.
A bunch of actions is called if get_named_trigger_data() returns false.
But that doesn't need to be called after event_trigger_register(), so it
can be moved up, allowing event_trigger_register() to be called just
before hist_trigger_enable() keeping them together and allowing the
file->triggers to be properly populated.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250227163944.1c37f85f@gandalf.local.home
Fixes: 067fe038e7 ("tracing: Add variable reference handling to hist triggers")
Reported-by: Tomas Glozar <tglozar@redhat.com>
Tested-by: Tomas Glozar <tglozar@redhat.com>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Closes: https://lore.kernel.org/all/CAP4=nvTsxjckSBTz=Oe_UYh8keD9_sZC4i++4h72mJLic4_W4A@mail.gmail.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
We didn't get netfilter or wireless PRs this week, so next week's PR
is probably going to be bigger. A healthy dose of fixes for bugs
introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in
register_netdevice_notifier_dev_net() RDMA driver register notifier
after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue with
LED support"
* tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: ti: icss-iep: Reject perout generation request
idpf: fix checksums set in idpf_rx_rsc()
selftests: drv-net: Check if combined-count exists
net: ipv6: fix dst ref loop on input in rpl lwt
net: ipv6: fix dst ref loop on input in seg6 lwt
usbnet: gl620a: fix endpoint checking in genelink_bind()
net/mlx5: IRQ, Fix null string in debug print
net/mlx5: Restore missing trace event when enabling vport QoS
net/mlx5: Fix vport QoS cleanup on error
net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination.
af_unix: Fix memory leak in unix_dgram_sendmsg()
net: Handle napi_schedule() calls from non-interrupt
net: Clear old fragment checksum value in napi_reuse_skb
gve: unlink old napi when stopping a queue using queue API
net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
tcp: Defer ts_recent changes until req is owned
net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs()
net: enetc: remove the mm_lock from the ENETC v4 driver
net: enetc: add missing enetc4_link_deinit()
net: enetc: update UDP checksum when updating originTimestamp field
...
Currently, when validating the mokvar table, we (re)map the entire table
on each iteration of the loop, adding space as we discover new entries.
If the table grows over a certain size, this fails due to limitations of
early_memmap(), and we get a failure and traceback:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:139 __early_ioremap+0xef/0x220
...
Call Trace:
<TASK>
? __early_ioremap+0xef/0x220
? __warn.cold+0x93/0xfa
? __early_ioremap+0xef/0x220
? report_bug+0xff/0x140
? early_fixup_exception+0x5d/0xb0
? early_idt_handler_common+0x2f/0x3a
? __early_ioremap+0xef/0x220
? efi_mokvar_table_init+0xce/0x1d0
? setup_arch+0x864/0xc10
? start_kernel+0x6b/0xa10
? x86_64_start_reservations+0x24/0x30
? x86_64_start_kernel+0xed/0xf0
? common_startup_64+0x13e/0x141
</TASK>
---[ end trace 0000000000000000 ]---
mokvar: Failed to map EFI MOKvar config table pa=0x7c4c3000, size=265187.
Mapping the entire structure isn't actually necessary, as we don't ever
need more than one entry header mapped at once.
Changes efi_mokvar_table_init() to only map each entry header, not the
entire table, when determining the table size. Since we're not mapping
any data past the variable name, it also changes the code to enforce
that each variable name is NUL terminated, rather than attempting to
verify it in place.
Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Pull sound fixes from Takashi Iwai:
"A collection of fixes. The only slightly large change is for ASoC
Cirrus codec, but that's still in a normal range. All the rest are
small device-specific fixes and should be fairly safe to take"
* tag 'sound-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix microphone regression on ASUS N705UD
ALSA: hda/realtek: Fix wrong mic setup for ASUS VivoBook 15
ASoC: cs35l56: Prevent races when soft-resetting using SPI control
firmware: cs_dsp: Remove async regmap writes
ASoC: Intel: sof_sdw: warn both sdw and pch dmic are used
ASoC: SOF: Intel: don't check number of sdw links when set dmic_fixup
ASoC: dapm-graph: set fill colour of turned on nodes
ASoC: fsl: Rename stream name of SAI DAI driver
ASoC: es8328: fix route from DAC to output
ALSA: usb-audio: Re-add sample rate quirk for Pioneer DJM-900NXS2
ASoC: tas2764: Set the SDOUT polarity correctly
ASoC: tas2764: Fix power control mask
ALSA: usb-audio: Avoid dropping MIDI events at closing multiple ports
ASoC: tas2770: Fix volume scale
IEP driver supports both perout and pps signal generation
but perout feature is faulty with half-cooked support
due to some missing configuration. Remove perout
support from the driver and reject perout requests with
"not supported" error code.
Fixes: c1e0230eea ("net: ti: icss-iep: Add IEP driver")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250227092441.1848419-1-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some drivers, like tg3, do not set combined-count:
$ ethtool -l enp4s0f1
Channel parameters for enp4s0f1:
Pre-set maximums:
RX: 4
TX: 4
Other: n/a
Combined: n/a
Current hardware settings:
RX: 4
TX: 1
Other: n/a
Combined: n/a
In the case where combined-count is not set, the ethtool netlink code
in the kernel elides the value and the code in the test:
netnl.channels_get(...)
With a tg3 device, the returned dictionary looks like:
{'header': {'dev-index': 3, 'dev-name': 'enp4s0f1'},
'rx-max': 4,
'rx-count': 4,
'tx-max': 4,
'tx-count': 1}
Note that the key 'combined-count' is missing. As a result of this
missing key the test raises an exception:
# Exception| if channels['combined-count'] == 0:
# Exception| ~~~~~~~~^^^^^^^^^^^^^^^^^^
# Exception| KeyError: 'combined-count'
Change the test to check if 'combined-count' is a key in the dictionary
first and if not assume that this means the driver has separate RX and
TX queues.
With this change, the test now passes successfully on tg3 and mlx5
(which does have a 'combined-count').
Fixes: 1cf2704242 ("net: selftest: add test for netdev netlink queue-get API")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250226181957.212189-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Temporarily allow the creation of zero length files in efivarfs so the
'fwupd' user space firmware update tool can continue to operate. This
hack should be reverted as soon as the fwupd mechanisms for updating
firmware have been fixed.
fwupd has been coded to open a firmware file, close it, remove the
immutable bit and write to it. Since commit 908af31f48 ("efivarfs:
fix error on write to new variable leaving remnants") this behaviour
results in the first close removing the file which causes the second
write to fail. To allow fwupd to keep working code up an indicator of
size 1 if a write fails and only remove the file on that condition (so
create at zero size is allowed).
Tested-by: Richard Hughes <richard@hughsie.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
[ardb: replace LVFS with fwupd, as suggested by Richard]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
DMA areas are not necessarily backed by struct page, so we cannot
rely on it for deferred I/O. Allocate a shadow buffer for drivers
that require deferred I/O and use it as framebuffer memory.
Fixes driver errors about being "Unable to handle kernel NULL pointer
dereference at virtual address" or "Unable to handle kernel paging
request at virtual address".
The patch splits drm_fbdev_dma_driver_fbdev_probe() in an initial
allocation, which creates the DMA-backed buffer object, and a tail
that sets up the fbdev data structures. There is a tail function for
direct memory mappings and a tail function for deferred I/O with
the shadow buffer.
It is no longer possible to use deferred I/O without shadow buffer.
It can be re-added if there exists a reliably test for usable struct
page in the allocated DMA-backed buffer object.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Nuno Gonçalves <nunojpg@gmail.com>
CLoses: https://lore.kernel.org/dri-devel/CAEXMXLR55DziAMbv_+2hmLeH-jP96pmit6nhs6siB22cpQFr9w@mail.gmail.com/
Tested-by: Nuno Gonçalves <nunojpg@gmail.com>
Fixes: 5ab91447aa ("drm/tiny/ili9225: Use fbdev-dma")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v6.11+
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211090643.74250-1-tzimmermann@suse.de
After running the 'sendmsg02' program of Linux Test Project (LTP),
kmemleak reports the following memory leak:
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff888243866800 (size 2048):
comm "sendmsg02", pid 67, jiffies 4294903166
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 5e 00 00 00 00 00 00 00 ........^.......
01 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace (crc 7e96a3f2):
kmemleak_alloc+0x56/0x90
kmem_cache_alloc_noprof+0x209/0x450
sk_prot_alloc.constprop.0+0x60/0x160
sk_alloc+0x32/0xc0
unix_create1+0x67/0x2b0
unix_create+0x47/0xa0
__sock_create+0x12e/0x200
__sys_socket+0x6d/0x100
__x64_sys_socket+0x1b/0x30
x64_sys_call+0x7e1/0x2140
do_syscall_64+0x54/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Commit 689c398885 ("af_unix: Defer sock_put() to clean up path in
unix_dgram_sendmsg().") defers sock_put() in the error handling path.
However, it fails to account for the condition 'msg->msg_namelen != 0',
resulting in a memory leak when the code jumps to the 'lookup' label.
Fix issue by calling sock_put() if 'msg->msg_namelen != 0' is met.
Fixes: 689c398885 ("af_unix: Defer sock_put() to clean up path in unix_dgram_sendmsg().")
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Acked-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250225021457.1824-1-ahuang12@lenovo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
napi_schedule() is expected to be called either:
* From an interrupt, where raised softirqs are handled on IRQ exit
* From a softirq disabled section, where raised softirqs are handled on
the next call to local_bh_enable().
* From a softirq handler, where raised softirqs are handled on the next
round in do_softirq(), or further deferred to a dedicated kthread.
Other bare tasks context may end up ignoring the raised NET_RX vector
until the next random softirq handling opportunity, which may not
happen before a while if the CPU goes idle afterwards with the tick
stopped.
Such "misuses" have been detected on several places thanks to messages
of the kind:
"NOHZ tick-stop error: local softirq work is pending, handler #08!!!"
For example:
__raise_softirq_irqoff
__napi_schedule
rtl8152_runtime_resume.isra.0
rtl8152_resume
usb_resume_interface.isra.0
usb_resume_both
__rpm_callback
rpm_callback
rpm_resume
__pm_runtime_resume
usb_autoresume_device
usb_remote_wakeup
hub_event
process_one_work
worker_thread
kthread
ret_from_fork
ret_from_fork_asm
And also:
* drivers/net/usb/r8152.c::rtl_work_func_t
* drivers/net/netdevsim/netdev.c::nsim_start_xmit
There is a long history of issues of this kind:
019edd01d1 ("ath10k: sdio: Add missing BH locking around napi_schdule()")
3300685893 ("idpf: disable local BH when scheduling napi for marker packets")
e3d5d70cb4 ("net: lan78xx: fix "softirq work is pending" error")
e55c27ed9c ("mt76: mt7615: add missing bh-disable around rx napi schedule")
c0182aa985 ("mt76: mt7915: add missing bh-disable around tx napi enable/schedule")
970be1dff2 ("mt76: disable BH around napi_schedule() calls")
019edd01d1 ("ath10k: sdio: Add missing BH locking around napi_schdule()")
30bfec4fec ("can: rx-offload: can_rx_offload_threaded_irq_finish(): add new function to be called from threaded interrupt")
e63052a5dd ("mlx5e: add add missing BH locking around napi_schdule()")
83a0c6e589 ("i40e: Invoke softirqs after napi_reschedule")
bd4ce941c8 ("mlx4: Invoke softirqs after napi_reschedule")
8cf699ec84 ("mlx4: do not call napi_schedule() without care")
ec13ee8014 ("virtio_net: invoke softirqs after __napi_schedule")
This shows that relying on the caller to arrange a proper context for
the softirqs to be handled while calling napi_schedule() is very fragile
and error prone. Also fixing them can also prove challenging if the
caller may be called from different kinds of contexts.
Therefore fix this from napi_schedule() itself with waking up ksoftirqd
when softirqs are raised from task contexts.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: Francois Romieu <romieu@fr.zoreil.com>
Closes: https://lore.kernel.org/lkml/354a2690-9bbf-4ccb-8769-fa94707a9340@molgen.mpg.de/
Cc: Breno Leitao <leitao@debian.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250223221708.27130-1-frederic@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In certain cases, napi_get_frags() returns an skb that points to an old
received fragment, This skb may have its skb->ip_summed, csum, and other
fields set from previous fragment handling.
Some network drivers set skb->ip_summed to either CHECKSUM_COMPLETE or
CHECKSUM_UNNECESSARY when getting skb from napi_get_frags(), while
others only set skb->ip_summed when RX checksum offload is enabled on
the device, and do not set any value for skb->ip_summed when hardware
checksum offload is disabled, assuming that the skb->ip_summed
initiated to zero by napi_reuse_skb, ionic driver for example will
ignore/unset any value for the ip_summed filed if HW checksum offload is
disabled, and if we have a situation where the user disables the
checksum offload during a traffic that could lead to the following
errors shown in the kernel logs:
<IRQ>
dump_stack_lvl+0x34/0x48
__skb_gro_checksum_complete+0x7e/0x90
tcp6_gro_receive+0xc6/0x190
ipv6_gro_receive+0x1ec/0x430
dev_gro_receive+0x188/0x360
? ionic_rx_clean+0x25a/0x460 [ionic]
napi_gro_frags+0x13c/0x300
? __pfx_ionic_rx_service+0x10/0x10 [ionic]
ionic_rx_service+0x67/0x80 [ionic]
ionic_cq_service+0x58/0x90 [ionic]
ionic_txrx_napi+0x64/0x1b0 [ionic]
__napi_poll+0x27/0x170
net_rx_action+0x29c/0x370
handle_softirqs+0xce/0x270
__irq_exit_rcu+0xa3/0xc0
common_interrupt+0x80/0xa0
</IRQ>
This inconsistency sometimes leads to checksum validation issues in the
upper layers of the network stack.
To resolve this, this patch clears the skb->ip_summed value for each
reused skb in by napi_reuse_skb(), ensuring that the caller is responsible
for setting the correct checksum status. This eliminates potential
checksum validation issues caused by improper handling of
skb->ip_summed.
Fixes: 76620aafd6 ("gro: New frags interface to avoid copying shinfo")
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250225112852.2507709-1-mheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull bcachefs fixes from Kent Overstreet:
"A couple small ones, the main user visible changes/fixes are:
- Fix a bug where truncate would rarely fail and return 1
- Revert the directory i_size code: this turned out to have a number
of issues that weren't noticed because the fsck code wasn't
correctly reporting errors (ouch), and we're late enough in the
cycle that it can just wait until 6.15"
* tag 'bcachefs-2025-02-26' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix truncate sometimes failing and returning 1
bcachefs: Fix deadlock
bcachefs: Check for -BCH_ERR_open_buckets_empty in journal resize
bcachefs: Revert directory i_size
bcachefs: fix bch2_extent_ptr_eq()
bcachefs: Fix memmove when move keys down
bcachefs: print op->nonce on data update inconsistency
__bch_truncate_folio() may return 1 to indicate dirtyness of the folio
being truncated, needed for fpunch to get the i_size writes correct.
But truncate was forgetting to clear ret, and sometimes returning it as
an error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This turned out to have several bugs, which were missed because the fsck
code wasn't properly reporting errors - whoops.
Kicking it out for now, hopefully it can make 6.15.
Cc: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull SCSI fixes from James Bottomley:
"Small ufs fixes and a core change to clear the command private area on
every retry (which fixes a reported bug in virtio_scsi)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: bsg: Fix crash when arpmb command fails
scsi: ufs: core: Set default runtime/system PM levels before ufshcd_hba_init()
scsi: core: Clear driver private data when retrying request
scsi: ufs: core: Fix ufshcd_is_ufs_dev_busy() and ufshcd_eh_timed_out()
Pull workqueue update from Tejun Heo:
"This contains a patch improve debug visibility.
While it isn't a fix, the change carries virtually no risk and makes
it substantially easier to chase down a class of problems"
* tag 'wq-for-6.14-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Log additional details when rejecting work
Pull sched_ext fix from Tejun Heo:
"pick_task_scx() has a workaround to avoid stalling when the fair
class's balance() says yes but pick_task() says no.
The workaround was incorrectly deciding to keep the prev taks running
if the task is on SCX even when the task is in a sleeping state, which
can lead to several confusing failure modes.
Fix it by testing the prev task is currently queued on SCX instead"
* tag 'sched_ext-for-6.14-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix pick_task_scx() picking non-queued tasks when it's called without balance()
Pull NFS client fixes from Anna Schumaker:
"Stable Fixes:
- O_DIRECT writes should adjust file length
Other Bugfixes:
- Adjust delegated timestamps for O_DIRECT reads and writes
- Prevent looping due to rpc_signal_task() races
- Fix a deadlock when recovering state on a sillyrenamed file
- Properly handle -ETIMEDOUT errors from tlshd
- Suppress build warnings for unused procfs functions
- Fix memory leak of lsm_contexts"
* tag 'nfs-for-6.14-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
lsm,nfs: fix memory leak of lsm_context
sunrpc: suppress warnings for unused procfs functions
SUNRPC: Handle -ETIMEDOUT return from tlshd
NFSv4: Fix a deadlock when recovering state on a sillyrenamed file
SUNRPC: Prevent looping due to rpc_signal_task() races
NFS: Adjust delegated timestamps for O_DIRECT reads and writes
NFS: O_DIRECT writes must check and adjust the file length
Pull landlock fixes from Mickaël Salaün:
"Fixes to TCP socket identification, documentation, and tests"
* tag 'landlock-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add binaries to .gitignore
selftests/landlock: Test that MPTCP actions are not restricted
selftests/landlock: Test TCP accesses with protocol=IPPROTO_TCP
landlock: Fix non-TCP sockets restriction
landlock: Minor typo and grammar fixes in IPC scoping documentation
landlock: Fix grammar error
selftests/landlock: Enable the new CONFIG_AF_UNIX_OOB
