There is no reason to set type_base here: the chip doesn't set
num_type_regs and none of the IRQs have type information so it's
not possible for regmap-irq to configure IRQ types.
Type registers are also deprecated in regmap-irq, so any IRQ type
support in the future should be implemented using config registers
instead.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220721102558.25457-3-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Type registers in regmap-irq have been deprecated in favor of config
registers, which are more general. Chips using type_base can switch
over to a single config base register and a standard ->set_irq_type()
callback provided by regmap-irq, which uses the type info associated
with each 'struct regmap_irq' to update type registers in the same
way as the old code did.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220721102558.25457-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit b7898396f4 ("ASoC: soc-pcm: Fix and cleanup DPCM locking")
added __soc_pcm_close() for non-lock version of soc_pcm_close().
But soc_pcm_close() is not using it. It is no problem, but confusable.
static int __soc_pcm_close(...)
{
=> return soc_pcm_clean(rtd, substream, 0);
}
static int soc_pcm_close(...)
{
...
snd_soc_dpcm_mutex_lock(rtd);
=> soc_pcm_clean(rtd, substream, 0);
snd_soc_dpcm_mutex_unlock(rtd);
return 0;
}
This patch use it.
Fixes: b7898396f4 ("ASoC: soc-pcm: Fix and cleanup DPCM locking")
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87czctgg3w.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Martin Povišer <povik+lin@cutebit.org>:
sending what should be the final touches on Apple MCA driver. It most
likely goes without saying but please do not merge the DT additions
into the ASoC tree.
In DAI ops, accesses to the native cluster (of the DAI), and to data of
clusters related to it by a DPCM frontend-backend link, should have
been synchronized by the 'pcm_mutex' lock at ASoC level.
What is not covered are the 'port_driver' accesses on foreign clusters
to which the current cluster has no a priori relation, so fill in
locking for that. (This should only matter in bizarre configurations of
sharing one MCA peripheral between ASoC cards.)
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220824160715.95779-5-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Chunxu Li <chunxu.li@mediatek.com>:
Add SOF related field.
1. Add a property "mediatek,adsp", Only when adsp phandle could be retrieved,
from DTS, the SOF related part of machine driver is executed.
2. Add a property "mediatek,dai-link" to support dai-links could be specified
from DTS
Clang warns:
sound/soc/codecs/src4xxx.c:280:3: error: variable 'd' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized]
default:
^~~~~~~
sound/soc/codecs/src4xxx.c:298:59: note: uninitialized use occurs here
ret = regmap_write(src4xxx->regmap, SRC4XXX_RCV_PLL_11, d);
^
sound/soc/codecs/src4xxx.c:223:20: note: initialize the variable 'd' to silence this warning
int val, pj, jd, d;
^
= 0
sound/soc/codecs/src4xxx.c:280:3: error: variable 'jd' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized]
default:
^~~~~~~
sound/soc/codecs/src4xxx.c:293:59: note: uninitialized use occurs here
ret = regmap_write(src4xxx->regmap, SRC4XXX_RCV_PLL_10, jd);
^~
sound/soc/codecs/src4xxx.c:223:17: note: initialize the variable 'jd' to silence this warning
int val, pj, jd, d;
^
= 0
sound/soc/codecs/src4xxx.c:280:3: error: variable 'pj' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized]
default:
^~~~~~~
sound/soc/codecs/src4xxx.c:288:59: note: uninitialized use occurs here
ret = regmap_write(src4xxx->regmap, SRC4XXX_RCV_PLL_0F, pj);
^~
sound/soc/codecs/src4xxx.c:223:13: note: initialize the variable 'pj' to silence this warning
int val, pj, jd, d;
^
= 0
3 errors generated.
The datasheet does not have any default values for these regmap values
so pick some arbitrary values and print to the user that this is the
case to silence the warnings.
Link: https://github.com/ClangBuiltLinux/linux/issues/1691
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: "Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com>
Suggested-by: Matt Flax <flatmax@flatmax.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Matt Flax <flatmax@flatmax.com>
Link: https://lore.kernel.org/r/20220823151939.2493697-1-nathan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Hi,
The FSR (Firmware State Register) holds the ROM state information, it does not
contain error information.
The FSR itself is a bit more complicated as well as the state depends on the
module currently in use.
The error code from ROM or the status code from the firmware is located at the
next register.
Fix the handling of the FSR in order to provide usable and human readable (in
most cases) report on the status and error.
Regards,
Peter
---
Peter Ujfalusi (3):
ASoC: SOF: Intel: hda: Correct the ROM/FW state reporting code
ASoC: SOF: Intel: hda-loader: Use the FSR state definitions during
bootup
ASoC: SOF: Intel: hda: Drop no longer used ROM state definitions
sound/soc/sof/intel/hda-loader.c | 10 +--
sound/soc/sof/intel/hda.c | 147 ++++++++++++++++++++++++++-----
sound/soc/sof/intel/hda.h | 69 +++++++++++++--
3 files changed, 194 insertions(+), 32 deletions(-)
--
2.37.0
From current design in sof_machine_check and snd_sof_new_platform_drv,
the SOF can only support ACPI type machine.
1. In sof_machine_check if there is no ACPI machine exist, the function
will return -ENODEV directly, that's we don't expected if we do not
base on ACPI machine.
2. In snd_sof_new_platform_drv the component driver need a driver name
to do ignore_machine, currently the driver name is obtained from
machine->drv_name, and the type of machine is snd_soc_acpi_mach.
So we add a new function named sof_of_machine_select that we can pass
sof_machine_check and obtain info required by snd_sof_new_platform_drv.
Signed-off-by: Chunxu Li <chunxu.li@mediatek.com>
Link: https://lore.kernel.org/r/20220805070449.6611-2-chunxu.li@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With disabling combine mode, the multiple successive
FIFO registers or non successive FIFO registers of SAI module
can work with the sdma multi fifo script.
This patch is to configure the necessary information to
the SDMA engine driver for support multi fifo script.
'words_per_fifo' is the channels for each dataline
'n_fifos_src' and 'n_fifos_dst' are the fifo number
'stride_fifos_src' and 'stride_fifos_dst' are the stride
between enable FIFOs
'maxburst' is the multiply of datalines
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1661218573-2154-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If a 'set_bclk_ratio' call is attempted on a DAI not implementing the
method, make it an -ENOSUPP error instead of -EINVAL. Assume the DAI can
still be okay with the ratio, just does not care to register a handler.
No current in-tree users of snd_soc_dai_set_bclk_ratio seem to inspect
the return value, but -ENOSUPP disables an error print from within the
common soc_dai_ret return filter. With the new behavior a machine
driver can do a blanket 'set_bclk_ratio' on all DAIs on a bus, some of
which may care about the ratio, some of which may not.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220818165336.76403-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
1. Add widgets, routes and dai-links required by SOF
2. Only when adsp phandle could be retrieved from DTS, the SOF related part
of machine driver is executed.
3. Support dai-links could be specified from DTS, so that
we can disable AP side hardware controls when DSP SOF controls the same
audio FE.
Signed-off-by: Chunxu Li <chunxu.li@mediatek.com>
Link: https://lore.kernel.org/r/20220818025113.17144-4-chunxu.li@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
1. Add widgets, routes and dai-links required by SOF
2. Only when adsp phandle could be retrieved from DTS, the SOF related part
of machine driver is executed.
3. Support dai-links could be specified from DTS, so that
we can disable AP side hardware controls when DSP SOF controls the same
audio FE.
Signed-off-by: Chunxu Li <chunxu.li@mediatek.com>
Link: https://lore.kernel.org/r/20220818025113.17144-3-chunxu.li@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
