Add support for hardware PPS (Pulse Per Second) output to the
AMD XGBE driver. The implementation enables flexible periodic
output mode, exposing it via the PTP per_out interface.
The driver supports configuring PPS output using the standard
PTP subsystem, allowing precise periodic signal generation for
time synchronization applications.
The feature has been verified using the testptp tool and
oscilloscope.
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20250909113143.1364477-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Certain i.MX SoCs, such as i.MX8QM and i.MX8QXP, feature enhanced
FEC hardware that supports Ethernet Jumbo frames with packet sizes
up to 16K bytes.
When Jumbo frames are supported, the TX FIFO may not be large enough
to hold an entire frame. To handle this, the FIFO is configured to
operate in cut-through mode when the frame size exceeds
(PKT_MAXBUF_SIZE - ETH_HLEN - ETH_FCS_LEN), which allows transmission
to begin once the FIFO reaches a certain threshold.
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://patch.msgid.link/20250910185211.721341-7-shenwei.wang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new rx_frame_size member in the fec_enet_private structure to
track the RX buffer size. On the Jumbo frame enabled system, the value
will be recalculated whenever the MTU is updated, allowing the driver
to allocate RX buffer efficiently.
Configure the TRUNC_FL (Frame Truncation Length) based on the smaller
value between max_buf_size and the rx_frame_size to maintain consistent
RX error behavior, regardless of whether Jumbo frames are enabled.
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://patch.msgid.link/20250910185211.721341-5-shenwei.wang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor code to support Jumbo frame functionality by adding a member
variable in the fec_enet_private structure to store PKT_MAXBUF_SIZE.
Remove the OPT_FRAME_SIZE and define a new macro OPT_ARCH_HAS_MAX_FL to
indicate architectures that support configurable maximum frame length.
And update the MAX_FL register value to max_buf_size when
OPT_ARCH_HAS_MAX_FL is defined as 1.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://patch.msgid.link/20250910185211.721341-2-shenwei.wang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The variable 'err' is declared as u32, but it is used to store
negative error codes such as -EINVAL.
Changing the type of 'err' to int ensures proper representation of
negative error codes and aligns with standard kernel error handling
conventions.
Also, there is no need to initialize 'err' since it is always set
before being used.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Shannon Nelson <sln@onemain.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20250912141426.3922545-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Fwlog support in ixgbe
Michal Swiatkowski says:
Firmware logging is a feature that allow user to dump firmware log using
debugfs interface. It is supported on device that can handle specific
firmware ops. It is true for ice and ixgbe driver.
Prepare code from ice driver to be moved to the library code and reuse
it in ixgbe driver.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ixgbe: fwlog support for e610
ice, libie: move fwlog code to libie
ice: reregister fwlog after driver reinit
ice: prepare for moving file to libie
ice: move debugfs code to fwlog
libie, ice: move fwlog admin queue to libie
ice: drop driver specific structure from fwlog code
ice: check for PF number outside the fwlog code
ice: move out debugfs init from fwlog
ice: allow calling custom send function in fwlog
ice: add pdev into fwlog structure and use it for logging
ice: introduce ice_fwlog structure
ice: drop ice_pf_fwlog_update_module()
ice: move get_fwlog_data() to fwlog file
ice: make fwlog functions static
====================
Link: https://patch.msgid.link/20250911210525.345110-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Parvathi Pudi says:
====================
PRU-ICSSM Ethernet Driver
The Programmable Real-Time Unit Industrial Communication Sub-system (PRU-ICSS)
is available on the TI SOCs in two flavors: Gigabit ICSS (ICSSG) and the older
Megabit ICSS (ICSSM).
Support for ICSSG Dual-EMAC mode has already been mainlined [1] and the
fundamental components/drivers such as PRUSS driver, Remoteproc driver,
PRU-ICSS INTC, and PRU-ICSS IEP drivers are already available in the mainline
Linux kernel. The current set of patch series builds on top of these components
and introduces changes to support the Dual-EMAC using ICSSM on the TI AM57xx,
AM437x and AM335x devices.
AM335x, AM437x and AM57xx devices may have either one or two PRU-ICSS instances
with two 32-bit RISC PRU cores. Each PRU core has (a) dedicated Ethernet interface
(MII, MDIO), timers, capture modules, and serial communication interfaces, and
(b) dedicated data and instruction RAM as well as shared RAM for inter PRU
communication within the PRU-ICSS.
These patches add support for basic RX and TX functionality over PRU Ethernet
ports in Dual-EMAC mode.
Further, note that these are the initial set of patches for a single instance of
PRU-ICSS Ethernet. Additional features such as Ethtool support, VLAN Filtering,
Multicast Filtering, Promiscuous mode, Storm prevention, Interrupt coalescing,
Linux PTP (ptp4l) Ordinary clock and Switch mode support for AM335x, AM437x
and AM57x along with support for a second instance of PRU-ICSS on AM57x
will be posted subsequently.
The patches presented in this series have gone through the patch verification
tools and no warnings or errors are reported. Sample test logs obtained from AM33x,
AM43x and AM57x verifying the functionality on Linux next kernel are available here:
[Interface up Testing](https://gist.github.com/ParvathiPudi/59ca0087dc7bed0f83a3b0e6db27d39c)
[Ping Testing](https://gist.github.com/ParvathiPudi/bcd39aa7006f6176d8c5b71a23d0928b)
[Iperf Testing](https://gist.github.com/ParvathiPudi/9bb4fa42410fbc757a93f65ecb45e4f3)
[1] https://lore.kernel.org/all/20230106121046.886863-1-danishanwar@ti.com/
[2] https://lore.kernel.org/all/20250108125937.10604-1-basharath@couthit.com/
====================
Link: https://patch.msgid.link/20250912104741.528721-1-parvathi@couthit.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Changes corresponding to link configuration such as speed and duplexity.
IRQ and handler initializations are performed for packet reception.Firmware
receives the packet from the wire and stores it into OCMC queue. Next, it
notifies the CPU via interrupt. Upon receiving the interrupt CPU will
service the IRQ and packet will be processed by pushing the newly allocated
SKB to upper layers.
When the user application want to transmit a packet, it will invoke
sys_send() which will in turn invoke the PRUETH driver, then it will write
the packet into OCMC queues. PRU firmware will pick up the packet and
transmit it on to the wire.
Reviewed-by: Mohan Reddy Putluru <pmohan@couthit.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Basharath Hussain Khaja <basharath@couthit.com>
Signed-off-by: Parvathi Pudi <parvathi@couthit.com>
Link: https://patch.msgid.link/20250912115443.529856-5-parvathi@couthit.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Updates for MII_RT hardware peripheral configuration such as RX and TX
configuration for PRU0 and PRU1, frame sizes, and MUX config.
Updates for PRU-ICSS firmware register configuration and DRAM, SRAM and
OCMC memory initialization, which will be used in the runtime for packet
reception and transmission.
DUAL-EMAC memory allocation for software queues and its supporting
components such as the buffer descriptors and queue descriptors. These
software queues are placed in OCMC memory and are shared with CPU by
PRU-ICSS for packet receive and transmit.
All declarations and macros are being used from common header file
for various protocols.
Reviewed-by: Mohan Reddy Putluru <pmohan@couthit.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Basharath Hussain Khaja <basharath@couthit.com>
Signed-off-by: Parvathi Pudi <parvathi@couthit.com>
Link: https://patch.msgid.link/20250912115443.529856-4-parvathi@couthit.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Updates Kernel configuration to enable PRUETH driver and its dependencies
along with makefile changes to add the new PRUETH driver.
Changes includes init and deinit of ICSSM PRU Ethernet driver including
net dev registration and firmware loading for DUAL-MAC mode running on
PRU-ICSS2 instance.
Changes also includes link handling, PRU booting, default firmware loading
and PRU stopping using existing remoteproc driver APIs.
Reviewed-by: Mohan Reddy Putluru <pmohan@couthit.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Basharath Hussain Khaja <basharath@couthit.com>
Signed-off-by: Parvathi Pudi <parvathi@couthit.com>
Link: https://patch.msgid.link/20250912104741.528721-3-parvathi@couthit.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: timestamping/ptp cleanups
This series cleans up the hardware timestamping / PTP initialisation
and cleanup code in the stmmac driver. Several key points in no
particular order:
1. Golden rule: unregister first, then release resources.
stmmac_release_ptp didn't do this.
2. Avoid leaking resources - __stmmac_open() failure leaves the
timestamping support initialised, but stops its clock. Also
violates (1).
3. Avoid double-release of resources - stmmac_open() followed by
stmmac_xdp_open() failing results in the PTP clock prepare and
enable counts being released, and if the interface is then
brought down, they are incorrectly released again. As XDP
doesn't gain any additional prepare/enables on the PTP clock,
remove this incorrect cleanup.
4. Changing the MTU of the interface is disruptive to PTP, and
remains so as long as. This is not fixed by this series (too
invasive at the moment.)
5. Avoid exporting functions that aren't used...
6. Avoid unnecessary runtime PM state manipulations (no point
manipulating this when MTU changes).
7. Make the PTP/timestamping initialisation more readable - no
point calling functions in the same file from one callsite
that return error codes from one location in the called function,
to only have the sole callee print messages depending on that
return code. Also simplifying the mess in stmmac_hw_setup().
Also placing support checks in a better location. Also getting
rid of the "ptp_register" boolean through this restructuring.
v1 was tested by Gatien CHEVALLIER - thanks.
====================
Link: https://patch.msgid.link/aMKtV6O0WqlmJFN4@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the call to stmmac_init_timestamping() or stmmac_setup_ptp() out
of stmmac_hw_setup() to its caller after stmmac_hw_setup() has
successfully completed. This slightly changes the ordering during
setup, but should be safe to do.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the PTP support check from stmmac_init_tstamp_counter() into
stmmac_init_timestamping() as it makes more sense to be there.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a function to setup PTP, which will enable the clock, initialise
the timestamping, and register with the PTP clock subsystem. Call this
when we want to register the PTP clock in stmmac_hw_setup(), otherwise
just call the
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Changes to the stmmac driver to fix various issues with PTP have made
stmmac_init_ptp() less about initialising the entire PTP block, and
now primarily deals with the packet timestamping support. The exception
to this is ptp_clk_freq_config(), which is an odditiy. It remains
as stmmac_init_ptp() is used both at .ndo_open() time and in the
resume paths.
However, restructuring this code to make it more easily readable makes
the continued use of "init_ptp" confusing.
In preparation to cleaning up the (re-)initialisation of timestamping,
rename the existing stmmac_init_ptp() to stmmac_init_timestamping()
which better reflects its functionality.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the stmmac_init_ptp() messages from stmmac_hw_setup() to
stmmac_init_ptp(), which will allow further cleanups.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename stmmac_release() to __stmmac_release(), providing a new
stmmac_release() method. Update stmmac_change_mtu() to use
__stmmac_release(). Move the runtime PM handling into stmmac_open()
and stmmac_release().
This avoids stmmac_change_mtu() needlessly fiddling with the runtime
PM state, and will allow future changes to remove code from
__stmmac_open() and __stmmac_release() that should only happen when
the net device is administratively brought up or down.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nothing outside of stmmac_main.c makes use of
stmmac_init_tstamp_counter(), so there's no point exporting it for
modules, or even having it non-static. Remove the export and make
it static.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Neither stmmac_xdp_release() nor the normal paths of stmmac_xdp_open()
touch clk_ptp_ref, so stmmac_xdp_open() should not be doing anything
with this clock. However, in its error path, it calls
stmmac_hw_teardown() which disables and unprepares this clock, which
can lead to the clock state becoming unbalanced when the netdev is
taken administratively down.
Remove this call to stmmac_hw_teardown(), and as this is the last user
of this function, remove the function as well.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cleanup function for stmmac_setup_ptp() is stmmac_release_ptp()
which entirely undoes the effects of stmmac_setup_ptp() by
unregistering the PTP device and then stopping the PTP clock,
whereas stmmac_hw_teardown() will only stop the PTP clock while
leaving the PTP device registered.
This can lead to a kernel oops - if __stmmac_open() fails after
registering the PTP clock, the PTP device will remain registered,
and if the module is removed, subsequent PTP device accesses will
lead to a kernel oops.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Follow the principle of unpublish from userspace and then teardown
resources.
Disable the PTP clock only after unregistering with the PTP subsystem,
which ensures that we only stop the clock that ticks the timesource
after we have removed the PTP device.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The aux_ts_lock mutex is only required while the PTP clock has been
successfully registered.
stmmac_ptp_register() does not return any errors (as we don't wish to
prevent the netdev being opened if PTP fails), stmmac_ptp_unregister()
was coded to allow it to be called irrespective of whether PTP was
successfully registered or not.
Arrange for the aux_ts_lock mutex to be destroyed if the PTP clock
is not functional during stmmac_ptp_register(), and only destroy it
in stmmac_ptp_unregister() if we had a PTP clock registered.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: dsa: mv88e6xxx: remove redundant ptp/timestamping code
mv88e6xxx as accumulated some unused data structures and code over the
years. This series removes it and simplifies the code. See the patches
for each change.
====================
Link: https://patch.msgid.link/aMKoYyN18FHFCa1q@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During recent testing with the netem qdisc to inject delays into TCP
traffic, we observed that our CLS BPF program failed to function correctly
due to incorrect classid retrieval from task_get_classid(). The issue
manifests in the following call stack:
bpf_get_cgroup_classid+5
cls_bpf_classify+507
__tcf_classify+90
tcf_classify+217
__dev_queue_xmit+798
bond_dev_queue_xmit+43
__bond_start_xmit+211
bond_start_xmit+70
dev_hard_start_xmit+142
sch_direct_xmit+161
__qdisc_run+102 <<<<< Issue location
__dev_xmit_skb+1015
__dev_queue_xmit+637
neigh_hh_output+159
ip_finish_output2+461
__ip_finish_output+183
ip_finish_output+41
ip_output+120
ip_local_out+94
__ip_queue_xmit+394
ip_queue_xmit+21
__tcp_transmit_skb+2169
tcp_write_xmit+959
__tcp_push_pending_frames+55
tcp_push+264
tcp_sendmsg_locked+661
tcp_sendmsg+45
inet_sendmsg+67
sock_sendmsg+98
sock_write_iter+147
vfs_write+786
ksys_write+181
__x64_sys_write+25
do_syscall_64+56
entry_SYSCALL_64_after_hwframe+100
The problem occurs when multiple tasks share a single qdisc. In such cases,
__qdisc_run() may transmit skbs created by different tasks. Consequently,
task_get_classid() retrieves an incorrect classid since it references the
current task's context rather than the skb's originating task.
Given that dev_queue_xmit() always executes with bh disabled, we can use
softirq_count() instead to obtain the correct classid.
The simple steps to reproduce this issue:
1. Add network delay to the network interface:
such as: tc qdisc add dev bond0 root netem delay 1.5ms
2. Build two distinct net_cls cgroups, each with a network-intensive task
3. Initiate parallel TCP streams from both tasks to external servers.
Under this specific condition, the issue reliably occurs. The kernel
eventually dequeues an SKB that originated from Task-A while executing in
the context of Task-B.
It is worth noting that it will change the established behavior for a
slightly different scenario:
<sock S is created by task A>
<class ID for task A is changed>
<skb is created by sock S xmit and classified>
prior to this patch the skb will be classified with the 'new' task A
classid, now with the old/original one. The bpf_get_cgroup_classid_curr()
function is a more appropriate choice for this case.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250902062933.30087-1-laoar.shao@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hosts under DOS attack can suffer from false sharing
in enqueue_to_backlog() : atomic_inc(&sd->dropped).
This is because sd->dropped can be touched from many cpus,
possibly residing on different NUMA nodes.
Generalize the sk_drop_counters infrastucture
added in commit c51613fa27 ("net: add sk->sk_drop_counters")
and use it to replace softnet_data.dropped
with NUMA friendly softnet_data.drop_counters.
This adds 64 bytes per cpu, maybe more in the future
if we increase the number of counters (currently 2)
per 'struct numa_drop_counters'.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250909121942.1202585-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lad Prabhakar says:
====================
Add GMAC support for Renesas RZ/{T2H, N2H} SoCs
This series adds support for the Ethernet MAC (GMAC) IP present on
the Renesas RZ/T2H and RZ/N2H SoCs.
While these SoCs use the same Synopsys DesignWare MAC IP (version 5.20) as
the existing RZ/V2H(P), the hardware is synthesized with different options
that require driver and binding updates:
- 8 RX/TX queue pairs instead of 4 (requiring 19 interrupts vs 11)
- Different clock requirements (3 clocks vs 7)
- Different reset handling (2 named resets vs 1 unnamed)
- Split header feature enabled
- GMAC connected through a MIIC PCS on RZ/T2H
The series first updates the generic dwmac binding to accommodate the
higher interrupt count, then extends the Renesas-specific binding with
a to document both SoCs.
The driver changes prepare for multi-SoC support by introducing OF match
data for per-SoC configuration, then add RZ/T2H support including PCS
integration through the existing RZN1 MIIC driver.
Note this patch series is dependent on the PCS driver [0]
(not a build dependency).
[0] https://lore.kernel.org/all/20250904114204.4148520-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
====================
Link: https://patch.msgid.link/20250908105901.3198975-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the Renesas GBETH stmmac glue driver to support the RZ/T2H SoC,
where the GMAC is connected through a MIIC PCS. Introduce a new
`has_pcs` flag in `struct renesas_gbeth_of_data` to indicate when PCS
handling is required.
When enabled, the driver parses the `pcs-handle` phandle, creates a PCS
instance with `miic_create()`, and wires it into phylink. Proper cleanup
is done with `miic_destroy()`. New init/exit/select hooks are added to
`plat_stmmacenet_data` for PCS integration.
Update Kconfig to select `PCS_RZN1_MIIC` when building the Renesas GBETH
driver so the PCS support is always available.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20250908105901.3198975-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare for adding RZ/T2H SoC support by making the driver configuration
selectable via OF match data. While the RZ/V2H(P) and RZ/T2H use the same
version of the Synopsys DesignWare MAC (version 5.20), the hardware is
synthesized with different options. To accommodate these differences,
introduce a struct holding per-SoC configuration such as clock list,
number of clocks, TX clock rate control, and STMMAC flags, and retrieve
it from the device tree match entry during probe.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20250908105901.3198975-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add device tree binding support for the Gigabit Ethernet MAC (GMAC) IP
on Renesas RZ/T2H and RZ/N2H SoCs. While these SoCs use the same
Synopsys DesignWare MAC version 5.20 as RZ/V2H, they are synthesized
with different hardware configurations.
Add new compatible strings "renesas,r9a09g077-gbeth" for RZ/T2H and
"renesas,r9a09g087-gbeth" for RZ/N2H, with the latter using RZ/T2H as
fallback since they share identical GMAC IP.
Update the schema to handle hardware differences between SoC variants.
RZ/T2H requires only 3 clocks compared to 7 on RZ/V2H, supports 8 RX/TX
queue pairs instead of 4, and needs 2 reset controls with reset-names
property versus a single unnamed reset. RZ/T2H also has the split header
feature enabled which is disabled on RZ/V2H.
Add support for an optional pcs-handle property to connect the GMAC to
the MIIC PCS converter on RZ/T2H. Use conditional schema validation to
enforce the correct clock, reset, and interrupt configurations per SoC
variant.
Extend the base snps,dwmac.yaml schema to accommodate the increased
interrupt count, supporting up to 19 interrupts and extending the
rx-queue and tx-queue interrupt name patterns to cover queues 0-7.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250908105901.3198975-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver by now supports 17 different Microchip (formerly known as
Micrel) chips: KSZ9021, KSZ9031, KSZ9131, KSZ8001, KS8737, KSZ8021,
KSZ8031, KSZ8041, KSZ8051, KSZ8061, KSZ8081, KSZ8873MLL, KSZ886X,
KSZ9477, LAN8814, LAN8804 and LAN8841.
Support for the VSC8201 was removed in commit 51f932c487 ("micrel phy
driver - updated(1)")
Update the help text to reflect that, list families instead of models to
ease future maintenance.
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250911-micrel-kconfig-v2-1-e8f295059050@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal says:
====================
netfilter: updates for net-next
1) Don't respond to ICMP_UNREACH errors with another ICMP_UNREACH
error.
2) Support fetching the current bridge ethernet address.
This allows a more flexible approach to packet redirection
on bridges without need to use hardcoded addresses. From
Fernando Fernandez Mancera.
3) Zap a few no-longer needed conditionals from ipvs packet path
and convert to READ/WRITE_ONCE to avoid KCSAN warnings.
From Zhang Tengfei.
4) Remove a no-longer-used macro argument in ipset, from Zhen Ni.
* tag 'nf-next-25-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_reject: don't reply to icmp error messages
ipvs: Use READ_ONCE/WRITE_ONCE for ipvs->enable
netfilter: nft_meta_bridge: introduce NFT_META_BRI_IIFHWADDR support
netfilter: ipset: Remove unused htable_bits in macro ahash_region
selftest:net: fixed spelling mistakes
====================
Link: https://patch.msgid.link/20250911143819.14753-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev_WARN() uses WARN/WARN_ON to print a backtrace along with
file and line information. In this case, udp_tunnel_nic_register()
returning an error is just a failed operation, not a kernel bug.
udp_tunnel_nic_register() can fail due to a memory allocation
failure (kzalloc() or udp_tunnel_nic_alloc()).
This is a normal runtime error and not a kernel bug.
Replace netdev_WARN() with netdev_warn() accordingly.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250910195031.3784748-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
