Commit Graph

1029426 Commits

Author SHA1 Message Date
V Sujith Kumar Reddy
5b01733f4f arm64: dts: qcom: sc7180: Update lpass cpu node for audio over dp
Updaate lpass dts node with HDMI reg, interrupt and iommu
for supporting audio over dp.

Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@qti.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210721080549.28822-2-srivasam@qti.qualcomm.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:34 -05:00
Caleb Connolly
3440b1becd arm64: dts: qcom: sdm845-oneplus: add ipa firmware names
Add the correct patch to the ipa firmware now that custom paths are
supported.

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Link: https://lore.kernel.org/r/20210720153125.43389-6-caleb@connolly.tech
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:34 -05:00
Caleb Connolly
383409806e arm64: dts: qcom: sdm845-oneplus-common: enable debug UART
A labelled diagram showing the location of the Rx and Tx testpoints for
the OnePlus 6 is available on the postmarketOS wiki:

https://wiki.postmarketos.org/wiki/Serial_debugging:Cable_schematics

The device uses 1.8v UART at a baud rate of 115200, bootloader output is
also available here.

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Link: https://lore.kernel.org/r/20210720153125.43389-3-caleb@connolly.tech
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:34 -05:00
Robert Foss
87f0b434b9 arm64: dts: qcom: sm8350: Rename GENI serial engine DT node
In order to conform with downstream and upstream for previous generations
of this hardware, rename dt-node 'qupv3_id_1' to 'qupv3_id_0'.

Fixes: b7e8f433a6 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC")
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://lore.kernel.org/r/20210803125756.93824-1-robert.foss@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:34 -05:00
satya priya
7dfb52dcc5 arm64: dts: qcom: sc7280: Remove pm8350 and pmr735b for sc7280-idp
Remove pm8350 and pmr735b die temp nodes as these pmics are
not present on this board.

Correct the tabbing for pmk8350_vadc node.

Fixes: fbd5a1d226 ("arm64: dts: qcom: sc7280: Add ADC channel nodes for PMIC temperatures to sc7280-idp")
Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1627995852-24505-1-git-send-email-skakit@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:34 -05:00
Sandeep Maheswaram
6493367f80 arm64: dts: qcom: sc7280: Add interconnect properties for USB
Add interconnect properties in USB DT nodes for sc7280.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1627880576-22391-1-git-send-email-sanm@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:34 -05:00
Dmitry Baryshkov
001ce9785c arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target
Remove the bus clock from the mdss device node, in order to facilitate
bus band width scaling on sm8250 target.

The parent device MDSS will not vote for bus bw, instead the vote will
be triggered by mdp device node. Since a minimum vote is required to
turn on bus clock, and since mdp device node already has the bus clock,
remove the clock from the mdss device.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210803101657.1072358-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:34 -05:00
Dmitry Baryshkov
111c528541 arm64: dts: qcom: sdm845: move bus clock to mdp node for sdm845 target
Move the bus clock to mdp device node,in order to facilitate bus band
width scaling on sdm845 target.

The parent device MDSS will not vote for bus bw, instead the vote will
be triggered by mdp device node. Since a minimum vote is required to
turn on bus clock, move the clock node to mdp device from where the
votes are requested.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210803101657.1072358-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:34 -05:00
Bjorn Andersson
67146f0738 arm64: dts: qcom: sm8350: Add wakeup-parent to tlmm
Now that TLMM has the wakeup table, specify the Power Domain Controller
to be the wakeup-parent of TLMM.

Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210312034218.3324410-2-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:33 -05:00
Ravi Kumar Bokka
437cdef515 arm64: dts: qcom: sc7180:: modified qfprom CORR size as per RAW size
modified QFPROM controller CORRECTED region size as per RAW region size

Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/1613582792-5225-1-git-send-email-rbokka@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:33 -05:00
Georgi Djakov
77b53d65dc arm64: dts: qcom: sm8250: Fix epss_l3 unit address
The unit address of the epss_l3 node is incorrect and does not match
the address of its "reg" property. Let's fix it.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20210211193637.9737-1-georgi.djakov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:33 -05:00
Yassine Oudjana
589562946f arm64: dts: qcom: msm8996: Add gpu cooling support
Add cooling-cells property and cooling maps for the GPU.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/Ku7mRZ_q2mYDZQ048IPlAc8VOVhH8N4uENhMI-JXxjeiZxjbRRs40ZJYwREb_ScgCvtQgtdl1VRjoDd7CR_8vCrbWVe8n3MwyB1S3VbSDis=@protonmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:33 -05:00
Konrad Dybcio
8dc7dba0cc arm64: dts: qcom: pm8004: Enable the PMIC peripherals by default
It makes no sense to require one more step to enable the PMIC features.
If the PMIC is present, it already has to be explicitly #included anyway.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210225213842.117694-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:33 -05:00
Vinod Koul
39d66a2e7f dt-bindings: arm: qcom: Drop qcom,mtp
qcom,mtp is used msm8916-mtp.dts but not documented, it is a generic mtp
compatible and we have specfifc ones for each mtp so drop this

arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: /: compatible: 'oneOf' conditional failed, one must be fixed:
        ['qcom,msm8916-mtp', 'qcom,msm8916-mtp/1', 'qcom,msm8916', 'qcom,mtp'] is too long
        Additional items are not allowed ('qcom,msm8916', 'qcom,mtp' were unexpected)
        Additional items are not allowed ('qcom,mtp' was unexpected)

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-8-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:33 -05:00
Vinod Koul
e9dd2f7204 dt-bindings: arm: qcom: Document alcatel,idol347 board
Document the alcatel,idol347 board. It was missing leading to warning:

arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dt.yaml: /: compatible: 'oneOf' conditional failed, one must be fixed:
        Additional items are not allowed ('qcom,msm8916' was unexpected)

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-7-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:33 -05:00
Vinod Koul
84f3efbe5b arm64: dts: qcom: msm8996: don't use underscore in node name
We have underscore (_) in node name leading to warning:

arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: clocks: xo_board: {'type': 'object'} is not allowed for {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[19200000]], 'clock-output-names': ['xo_board'], 'phandle': [[115]]}

Fix this by changing node name to use dash (-)

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-10-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:33 -05:00
Vinod Koul
8c678beca7 arm64: dts: qcom: msm8994: don't use underscore in node name
We have underscore (_) in node name leading to warning:
arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dt.yaml: clocks: xo_board: {'type': 'object'} is not allowed for {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[19200000]], 'phandle': [[26]]}
arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dt.yaml: clocks: sleep_clk: {'type': 'object'} is not allowed for {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[32768]]}

Fix this by changing node name to use dash (-)

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-9-vkoul@kernel.org
[bjorn: Added clock-output-names to satisfy parent_names]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:33 -05:00
Vinod Koul
639dfdbecd arm64: dts: qcom: sdm630: don't use underscore in node name
We have underscore (_) in node name so fix that up as well.

Fix this by changing node name to use dash (-)

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-11-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:33 -05:00
Vinod Koul
1b91b8ef60 arm64: dts: qcom: ipq6018: drop '0x' from unit address
Nodes need not contain '0x' for the unit address. Drop it to fix the
below warning:

arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml: reserved-memory:
'memory@0x60000' does not match any of the regexes

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-19-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:33 -05:00
Vinod Koul
c81210e389 arm64: dts: qcom: sdm660: use reg value for memory node
memory node like other node should be node@reg, which is missing in this
case, so fix it up

arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 1073741824, 0, 536870912]]}

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-18-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:33 -05:00
Vinod Koul
52c9887fba arm64: dts: qcom: ipq8074: fix pci node reg property
reg property should be array of values, here it is a single array,
leading to below warning:

arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@10000000:reg:0: [268435456, 3869, 268439328, 168, 557056, 8192, 269484032, 4096] is too long
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@10000000:ranges: 'oneOf' conditional failed, one must be fixed:
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@10000000:ranges: 'oneOf' conditional failed, one must be fixed:
[[2164260864, 0, 270532608, 270532608, 0, 1048576, 2181038080, 0, 271581184, 271581184, 0, 13631488]] is not of type 'null'
[2164260864, 0, 270532608, 270532608, 0, 1048576, 2181038080, 0, 271581184, 271581184, 0, 13631488] is too long
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@20000000:reg:0: [536870912, 3869, 536874784, 168, 524288, 8192, 537919488, 4096] is too long
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@20000000:ranges: 'oneOf' conditional failed, one must be fixed:
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@20000000:ranges: 'oneOf' conditional failed, one must be fixed:
[[2164260864, 0, 538968064, 538968064, 0, 1048576, 2181038080, 0, 540016640, 540016640, 0, 13631488]] is not of type 'null'
[2164260864, 0, 538968064, 538968064, 0, 1048576, 2181038080, 0, 540016640, 540016640, 0, 13631488] is too long

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-17-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:33 -05:00
Vinod Koul
cfdf0c2763 arm64: dts: qcom: sdm630: don't use empty memory node
We expect bootloader to full memory details but passing empty values
can give warning, so add a default value

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-15-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:33 -05:00
Vinod Koul
d53dc79f9b arm64: dts: qcom: msm8998: don't use empty memory node
We expect bootloader to full memory details but passing empty values
can give warning, so add a default value

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-14-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:33 -05:00
Vinod Koul
184adb500f arm64: dts: qcom: msm8996: don't use empty memory node
We expect bootloader to full memory details but passing empty values
can give warning, so add a default value

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-13-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:33 -05:00
Martin Botka
82e1783890 arm64: dts: qcom: sm6125: Add support for Sony Xperia 10II
This commits add support for Sony Xperia 10II based on the SM6125 SoC.

Currently working features:
- dmesg output to bootloader preconfigured display
- USB
- eMMC
- Volume down button

Signed-off-by: Martin Botka <martin.botka@somainline.org>
Link: https://lore.kernel.org/r/20210621195308.654587-2-martin.botka@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 10:27:23 -05:00
Martin Botka
cff4bbaf2a arm64: dts: qcom: Add support for SM6125
This commits adds the Device tree file for SM6125 SoC.

Signed-off-by: Martin Botka <martin.botka@somainline.org>
Link: https://lore.kernel.org/r/20210621195308.654587-1-martin.botka@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05 09:17:53 -05:00
Konrad Dybcio
59983a5c91 arm64: dts: qcom: sm8250: Add DMA to I2C/SPI
Add dma properties to I2C and SPI nodes to make sure DMA transfers can go
through. While at it, fix up the property order in SPI nodes to make #address-
and #size-cells go after all the meaningful properties.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210615142249.170512-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:05 -05:00
Bjorn Andersson
2e01e0c214 arm64: dts: qcom: sdm850-yoga: Enable IPA
Shuffle memory regions to make firmware loading succeed and then enable
the ipa device.

Tested-by: Steev Klimaszewski <steev@kali.org>
Link: https://lore.kernel.org/r/20210615232816.835325-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:05 -05:00
Konrad Dybcio
712e245fcb arm64: dts: qcom: sdm630: Add DMA to I2C hosts
Add DMA properties to I2C hosts to allow for DMA transfers.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-40-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:05 -05:00
Konrad Dybcio
536f44285f arm64: dts: qcom: sdm630: Add I2C functions to I2C pins
This was overlooked earlier, fix it to ensure the busses can
work properly.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-39-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:04 -05:00
Konrad Dybcio
18abedf7d4 arm64: dts: qcom: sdm630-nile: Remove gpio-keys autorepeat
The autorepeat feature is not needed on gpio-keys.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-38-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:04 -05:00
Konrad Dybcio
e634d8196f arm64: dts: qcom: sdm630-nile: Enable uSD card slot
Enable the internal uSD slot to let the user have more storage.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-37-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:04 -05:00
Konrad Dybcio
bc81940d8c arm64: dts: qcom: sdm630-nile: Specify ADSP firmware name
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-36-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:04 -05:00
Konrad Dybcio
f8fc1c43c5 arm64: dts: qcom: sdm630-nile: Add Synaptics touchscreen.
Delete the node on Ganges devices, as they use a different one.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-35-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:04 -05:00
Konrad Dybcio
4c1d849ec0 arm64: dts: qcom: sdm630-xperia: Retire sdm630-sony-xperia-ganges.dtsi
After further consideration, it is not worth to keep another
separate DTSI, as the differences between Nile and Ganges are
very minimal. Instead, let's just address the minimal differences
between Kirin and Mermaid.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-34-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:04 -05:00
Konrad Dybcio
fcbcd062a8 arm64: dts: qcom: sdm630-nile: Add Volume up key
Let's get loud!

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-33-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:04 -05:00
Konrad Dybcio
2c616239f2 arm64: dts: qcom: sdm630-nile: Add USB
Enable and configure DWC3 and QUSB2 PHY to enable USB
functionality on Nile and Ganges boards.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-32-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:04 -05:00
Konrad Dybcio
158f80a681 arm64: dts: qcom: sdm630-nile: Use &labels
Refer to nodes by their labels to match the current
convention.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-31-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:04 -05:00
AngeloGioacchino Del Regno
8b36c824b9 arm64: dts: qcom: sdm630-xperia-nile: Add all RPM and fixed regulators
Add all of the RPM PM660/PM660L regulators and the fixed ones,
defining the common electrical part of this platform.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-30-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:04 -05:00
Konrad Dybcio
ab29028439 arm64: dts: qcom: sdm660: Add required nodes for DSI1
Configure the second DSI host/phy and account for them in
the mmcc node.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-29-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:04 -05:00
AngeloGioacchino Del Regno
f3d5d3cc69 arm64: dts: qcom: sdm630: Configure the camera subsystem
Add nodes for camss, cci and its pinctrl in order to bring up
camera functionality.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-28-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:04 -05:00
Konrad Dybcio
c21512cbfb arm64: dts: qcom: sdm630: Add IMEM node
Add IMEM node and PIL reloc info as its child.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-27-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:04 -05:00
Konrad Dybcio
36c7b98f79 arm64: dts: qcom: Add device tree for SDM636
This SoC is almost identical to its older brother,
SDM660, with a few minor exceptions like the
different GPU.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-26-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:04 -05:00
Konrad Dybcio
05aa0eb325 arm64: dts: qcom: sdm660: Make the DTS an overlay on top of 630
There is SO MUCH common code between these two SoCs that it makes
no sense to keep what is essentially a duplicate of 630.dtsi. Instead,
it's better to just change the things that differ.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-25-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:04 -05:00
Konrad Dybcio
4bf0975405 arm64: dts: qcom: pm660(l): Add VADC and temp alarm nodes
Add VADC, temperature alarm and thermal zones for pm660(l)
to allow for temperature and voltage readouts and prevent
PMIC overheating.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-24-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:04 -05:00
AngeloGioacchino Del Regno
2a1fbb121a arm64: dts: qcom: pm660l: Support SPMI regulators on PMIC sid 3
The PM660L PMIC has SPMI regulators on the PMIC SID 3: let's add
the compatible in order to probe them.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-23-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:04 -05:00
Konrad Dybcio
7b56a804e5 arm64: dts: qcom: pm660l: Add WLED support
This will enable backlight control on WLED-enabled devices.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-22-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:03 -05:00
AngeloGioacchino Del Regno
b59b058c62 arm64: dts: qcom: pm660: Support SPMI regulators on PMIC sid 1
The PM660 PMIC has SPMI regulators on the PMIC SID 1: let's
declare the second pmic subtree and add the spmi vregs compatible
to probe them there.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-21-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:03 -05:00
AngeloGioacchino Del Regno
5cf69dcbec arm64: dts: qcom: sdm630: Add Adreno 508 GPU configuration
The SDM630 SoC features an Adreno 508.0 GPU with a minimum frequency
of 160MHz and a maximum of (depending on the speed-bin) 775MHz.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-20-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:03 -05:00
Konrad Dybcio
adc57d4a46 arm64: dts: qcom: sdm630: Raise tcsr_mutex_regs size
Enlarge the size to make sure all relevant registers can be reached.
This will be required to support the modem.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-19-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04 15:07:03 -05:00