The tas2781-hda supports multi-projects. In some projects, GpioInt() was
dropped due to no IRQ connection. See the example code below:
Device (SPKR)
{
Name (_ADR, One)
Name (_HID, "TXNW2781")
Method (_CRS, 0, NotSerialized)
{
Name (RBUF, ResourceTemplate ()
{
I2cSerialBusV2 (0x0038, ...)
I2cSerialBusV2 (0x0039, ...)
// GpioInt (Edge, ...) { 0x0000 }
//"GpioInt (...) {}" was commented out due to no IRQ connection.
})
Return (RBUF)
}
}
But in smi_i2c_probe(), smi_spi_probe() (serial-multi-instantiate.c), if
looking for IRQ by smi_get_irq() fails, it will return an error, will not add
new device, and cause smi_probe() to fail:
[ 2.356546] Serial bus multi instantiate pseudo device driver TXNW2781:00:
error -ENXIO: IRQ index 0 not found
[ 2.356561] Serial bus multi instantiate pseudo device driver TXNW2781:00:
error -ENXIO: Error requesting irq at index 0
So, we need to add an exception case for these situations. BTW, this patch
will take effect on both I2C and SPI devices.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251126141434.11110-1-baojun.xu@ti.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replace repetitive switch-case statements for PMF_POLICY_BIOS_OUTPUT_*
with a helper function and consolidated case handling. This reduces code
duplication and improves maintainability.
The 10 BIOS output policies (PMF_POLICY_BIOS_OUTPUT_1 through
PMF_POLICY_BIOS_OUTPUT_10) previously each had individual case statements
with identical logic. This patch introduces
amd_pmf_get_bios_output_idx() to map policy values to array indices,
consolidating the handling into a single case block with fallthrough.
Also, add a new function amd_pmf_update_bios_output() to simplify the code
handling.
This approach handles non-sequential policy enum values gracefully and
makes future additions easier to implement.
No functional changes.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20251127091038.2088387-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Handle more WMI events that are triggered on TUXEDO devices.
Testing the TUXEDO InfinityBook Pro 15 Gen9 Intel, the Stellaris 16 Gen5
Intel, the Stellaris 16 Gen5 AMD and going through the out of tree
tuxedo-drivers dkms package I identified more WMI events that are used by
Uniwill.
This patch binds them to their respective function, or marks them as
KE_IGNORE when they are send in addition to other actions, to make clear
that they don't need special handling. This also avoids warnings in dmesg.
The events with descriptions from memory:
UNIWILL_OSD_RADIOON and UNIWILL_OSD_RADIOOFF - Sent in addition to the
already handled UNIWILL_OSD_RFKILL on some devices.
UNIWILL_OSD_PERFORMANCE_MODE_TOGGLE - Physical button on some devices. Bind
it to a button so userspace can receive the keypress and do stuff with it.
UNIWILL_OSD_MUTE - Sent in addition to an already handled keypress.
UNIWILL_OSD_KB_LED_LEVEL0 - UNIWILL_OSD_KB_LED_LEVEL4 - Some devices sent
these instead of UNIWILL_OSD_KBDILLUMTOGGLE.
UNIWILL_OSD_WEBCAM_TOGGLE - Sent in addition to deactivating the Webcam on
firmware level.
UNIWILL_OSD_DC_ADAPTER_CHANGED - No special handling required here atm, but
will be for the charging priority feature.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251120215240.436835-2-wse@tuxedocomputers.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Improve support for system suspend. The register information has been
extracted from the ACPI DSDT code handling Windows Modern Standby. I
took over the weird multi-write function from the ACPI DSDT code where
it is called ECWS.
In addition to writing to the 0xE0 register, the ACPI Windows Modern
Standby code also does some changes to the thermal configuration. This
part is not implemented.
After this patch the laptop's power and LID LEDs will switch into the
typical breathing animation when the system is suspended and enabled
normally again after resuming.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Link: https://patch.msgid.link/20251119-thinkpad-t14s-ec-improvements-v2-3-441219857c02@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Ayaneo EC resets after hibernation, losing the charge control state.
Add a small PM hook to restore this state on hibernation resume.
The fan speed is also lost during hibernation, but since hibernation
failures are common with this class of devices, setting a low fan speed
when the userspace program controlling the fan will potentially not
take over could cause the device to overheat, so it is not restored.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20251119174505.597218-7-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Ayaneo 3 features hot-swappable controller modules. The ejection
and management is done through HID. However, after ejecting the modules,
the controller needs to be power cycled via the EC to re-initialize.
For this, the EC provides a variable that holds whether the left or
right modules are connected, and a power control register to turn
the controller on or off. After ejecting the modules, the controller
should be turned off. Then, after both modules are reinserted,
the controller may be powered on again to re-initialize.
This patch introduces two new sysfs attributes:
- `controller_modules`: a read-only attribute that indicates whether
the left and right modules are connected (none, left, right, both).
- `controller_power`: a read-write attribute that allows the user
to turn the controller on or off (with '1'/'0').
Therefore, after ejection is complete, userspace can power off the
controller, then wait until both modules have been reinserted
(`controller_modules` will return 'both') to turn on the controller.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20251119174505.597218-5-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Ayaneo devices support charge inhibition via the EC. This inhibition
only works while the device is powered on, and resets between restarts.
However, it is maintained across suspend/resume cycles.
The EC does not support charge threshold control. Instead, userspace
software on Windows manually toggles charge inhibition depending on
battery level.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20251119174505.597218-4-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently the function responsible for converting between utf16 and
utf8 strings will ignore any characters that cannot be converted. This
however also includes multi-byte characters that do not fit into the
provided string buffer.
This can cause problems if such a multi-byte character is followed by
a single-byte character. In such a case the multi-byte character might
be ignored when the provided string buffer is too small, but the
single-byte character might fit and is thus still copied into the
resulting string.
Fix this by stop filling the provided string buffer once a character
does not fit. In order to be able to do this extend utf32_to_utf8()
to return useful errno codes instead of -1.
Fixes: 74675a5850 ("NLS: update handling of Unicode")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251111131125.3379-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Adds the ppt_* and nv_* tuning knobs that are available via WMI methods
and adds proper min/max levels plus defaults.
The min/max are defined by ASUS and typically gained by looking at what
they allow in the ASUS Armoury Crate application - ASUS does not share
the values outside of this. It could also be possible to gain the AMD
values by use of ryzenadj and testing for the minimum stable value.
The general rule of thumb for adding to the match table is that if the
model range has a single CPU used throughout, then the DMI match can
omit the last letter of the model number as this is the GPU model.
If a min or max value is not provided it is assumed that the particular
setting is not supported. for example ppt_pl2_sppt_min/max is not set.
If a <ppt_setting>_def is not set then the default is assumed to be
<ppt_setting>_max
It is assumed that at least AC settings are available so that the
firmware attributes will be created - if no DC table is available
and power is on DC, then reading the attributes is -ENODEV.
Co-developed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mateusz Schyboll <dragonn@op.pl>
Tested-by: Porfet Lillian <porfet828@gmail.com>
Link: https://patch.msgid.link/20251102215319.3126879-10-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The fw_attributes_class provides a much cleaner interface to all of the
attributes introduced to asus-wmi. This patch moves all of these extra
attributes over to fw_attributes_class, and shifts the bulk of these
definitions to a new kernel module to reduce the clutter of asus-wmi
with the intention of deprecating the asus-wmi attributes in future.
The work applies only to WMI methods which don't have a clearly defined
place within the sysfs and as a result ended up lumped together in
/sys/devices/platform/asus-nb-wmi/ with no standard API.
Where possible the fw attrs now implement defaults, min, max, scalar,
choices, etc. As en example dgpu_disable becomes:
/sys/class/firmware-attributes/asus-armoury/attributes/dgpu_disable/
├── current_value
├── display_name
├── possible_values
└── type
as do other attributes.
Co-developed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://patch.msgid.link/20251102215319.3126879-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The GBMD/SBMC interface on recent devices supports Rapid Charge mode
(charge_types: Fast) in addition to Conservation Mode (charge_types:
Long_Life).
Query the GBMD interface on probe to determine if a device supports
Rapid Charge. If so, expose these two modes while carefully maintaining
their mutually exclusive state, which aligns with the behavior of
manufacturer utilities on Windows.
Signed-off-by: Rong Zhang <i@rong.moe>
Acked-by: Ike Panhc <ikepanhc@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-By: Jelle van der Waa <jelle@vdwaa.nl>
Link: https://patch.msgid.link/20251105182832.104946-5-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
An error code was assigned to a variable and checked accordingly.
This value was passed to a dev_err_probe() call in an if branch.
This function is documented in the way that the same value is returned.
Thus delete a redundant variable reassignment.
The source code was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://patch.msgid.link/90a2385c-9d19-46f2-8d31-618d5c10aa91@web.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
An error code was assigned to a variable and checked accordingly.
This value was passed to a dev_err_probe() call in an if branch.
This function is documented in the way that the same value is returned.
Thus delete a redundant variable reassignment.
The source code was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://patch.msgid.link/b25c9842-7ebc-43f0-a411-8098359f81a6@web.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
After studying the linuwu_sense driver
(https://github.com/0x7375646F/Linuwu-Sense) i was able to understand
the meaning of the SetGamingFanBehavior() WMI method:
- the first 16-bit are a bitmap of all fans affected by a fan behavior
change request.
- the next 8 bits contain four fan mode fields (2-bit), each being
associated with a bit inside the fan bitmap.
There are three fan modes: auto, turbo and custom.
Use this newfound knowledge to fix the turbo fan handling by setting
the correct bits before calling SetGamingFanBehavior(). Also check
the result of the WMI method call and return an error should the ACPI
firmware signal failure.
Reviewed-by: Kurt Borja <kuurtb@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251016180008.465593-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
