In f2fs_sbi_show(), the extension_list, extension_count and
hot_ext_count are read without holding sbi->sb_lock. If a concurrent
sysfs store modifies the extension list via f2fs_update_extension_list(),
the show path may read inconsistent count and array contents, potentially
leading to out-of-bounds access or displaying stale data.
Fix this by holding sb_lock around the entire extension list read
and format operation.
Fixes: b6a06cbbb5 ("f2fs: support hot file extension")
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
An extension should not exist in both the cold and hot extension lists
simultaneously. When adding a hot extension, check whether it already
exists in the cold list, and vice versa. Reject the operation with
-EINVAL if a conflict is found.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_destroy_extent_node() does not set FI_NO_EXTENT before clearing
extent nodes. When called from f2fs_drop_inode() with I_SYNC set,
concurrent kworker writeback can insert new extent nodes into the same
extent tree, racing with the destroy and triggering f2fs_bug_on() in
__destroy_extent_node(). The scenario is as follows:
drop inode writeback
- iput
- f2fs_drop_inode // I_SYNC set
- f2fs_destroy_extent_node
- __destroy_extent_node
- while (node_cnt) {
write_lock(&et->lock)
__free_extent_tree
write_unlock(&et->lock)
- __writeback_single_inode
- f2fs_outplace_write_data
- f2fs_update_read_extent_cache
- __update_extent_tree_range
// FI_NO_EXTENT not set,
// insert new extent node
} // node_cnt == 0, exit while
- f2fs_bug_on(node_cnt) // node_cnt > 0
Additionally, __update_extent_tree_range() only checks FI_NO_EXTENT for
EX_READ type, leaving EX_BLOCK_AGE updates completely unprotected.
This patch set FI_NO_EXTENT under et->lock in __destroy_extent_node(),
consistent with other callers (__update_extent_tree_range and
__drop_extent_tree) and check FI_NO_EXTENT for both EX_READ and
EX_BLOCK_AGE tree.
Fixes: 3fc5d5a182 ("f2fs: fix to shrink read extent node in batches")
Cc: stable@vger.kernel.org
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The fsparam_string_empty() gives an error when mounting without string, since
its type is set to fsparam_flag in VFS. So, let's allow the flag as well.
This addresses xfstests/f2fs/015 and f2fs/021.
Fixes: d185351325 ("f2fs: separate the options parsing and options checking")
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The following steps will change previous value of reserve_{blocks,node},
this dones not match the original intention.
1.mount -t f2fs -o reserve_root=8192 imgfile test_mount/
F2FS-fs (loop56): Mounted with checkpoint version = 1b69f8c7
mount info:
/dev/block/loop56 on /data/test_mount type f2fs (xxx,reserve_root=8192,reserve_node=0,resuid=0,resgid=0,xxx)
2.mount -t f2fs -o remount,reserve_root=4096 /data/test_mount
F2FS-fs (loop56): Preserve previous reserve_root=8192
check mount info: reserve_root change to 4096
/dev/block/loop56 on /data/test_mount type f2fs (xxx,reserve_root=4096,reserve_node=0,resuid=0,resgid=0,xxx)
Prior to commit d185351325 ("f2fs: separate the options parsing and options checking"),
the value of reserve_{blocks,node} was only set during the first mount, along with
the corresponding mount option F2FS_MOUNT_RESERVE_{ROOT,NODE} . If the mount option
F2FS_MOUNT_RESERVE_{ROOT,NODE} was found to have been set during the mount/remount,
the previously value of reserve_{blocks,node} would also be preserved, as shown in
the code below.
if (test_opt(sbi, RESERVE_ROOT)) {
f2fs_info(sbi, "Preserve previous reserve_root=%u",
F2FS_OPTION(sbi).root_reserved_blocks);
} else {
F2FS_OPTION(sbi).root_reserved_blocks = arg;
set_opt(sbi, RESERVE_ROOT);
}
But commit d185351325 ("f2fs: separate the options parsing and options checking")
only preserved the previous mount option; it did not preserve the previous value of
reserve_{blocks,node}. Since value of reserve_{blocks,node} value is assigned
or not depends on ctx->spec_mask, ctx->spec_mask should be alos handled in
f2fs_check_opt_consistency.
This patch will clear the corresponding ctx->spec_mask bits in f2fs_check_opt_consistency
to preserve the previously values of reserve_{blocks,node} if it already have a value.
Fixes: d185351325 ("f2fs: separate the options parsing and options checking")
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Neither F2FS nor VFS invalidates the block device page cache, which
results in reading stale metadata. An example scenario is shown below:
Terminal A Terminal B
mount /dev/vdb /mnt/f2fs
touch mx // ino = 4
sync
dump.f2fs -i 4 /dev/vdb// block on "[Y/N]"
touch mx2 // ino = 5
sync
umount /mnt/f2fs
dump.f2fs -i 5 /dev/vdb // block addr is 0
After umount, the block device page cache is not purged, causing
`dump.f2fs -i 5 /dev/vdb` to read stale metadata and see inode 5 with
block address 0.
Btrfs has encountered a similar issue before, the solution there was to
call sync_blockdev() and invalidate_bdev() when the device is closed:
mail-archive.com/linux-btrfs@vger.kernel.org/msg54188.html
For the root user, the f2fs kernel calls sync_blockdev() on umount to
flush all cached data to disk, and f2fs-tools can release the page cache
by issuing ioctl(fd, BLKFLSBUF) when accessing the device. However,
non-root users are not permitted to drop the page cache, and may still
observe stale data.
This patch calls sync_blockdev() and invalidate_bdev() during umount to
invalidate the block device page cache, thereby preventing stale
metadata from being read.
Note that this may result in an extra sync_blockdev() call on the first
device, in both f2fs_put_super() and kill_block_super(). The second call
do nothing, as there are no dirty pages left to flush. It ensures that
non-root users do not observe stale data.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Suspend can fail if kernel threads do not freeze for a while.
f2fs_gc and f2fs_discard threads can perform long-running operations
that prevent them from reaching a freeze point in a timely manner.
This patch adds explicit freezing checks in the following locations:
1. f2fs_gc: Added a check at the 'retry' label to exit the loop quickly
if freezing is requested, especially during heavy GC rounds.
2. __issue_discard_cmd: Added a 'suspended' flag to break both inner and
outer loops during discard command issuance if freezing is detected
after at least one command has been issued.
3. __issue_discard_cmd_orderly: Added a similar check for orderly discard
to ensure responsiveness.
These checks ensure that the threads release locks safely and enter the
frozen state.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
lockdep reported a potential deadlock:
a) TCMU device removal context:
- call del_gendisk() to get q->q_usage_counter
- call start_flush_work() to get work_completion of wb->dwork
b) f2fs writeback context:
- in wb_workfn(), which holds work_completion of wb->dwork
- call f2fs_balance_fs() to get sbi->gc_lock
c) f2fs vfs_write context:
- call f2fs_gc() to get sbi->gc_lock
- call f2fs_write_checkpoint() to get sbi->cp_global_sem
d) f2fs mount context:
- call recover_fsync_data() to get sbi->cp_global_sem
- call f2fs_check_and_fix_write_pointer() to call blkdev_report_zones()
that goes down to blk_mq_alloc_request and get q->q_usage_counter
Original callstack is in Closes tag.
However, I think this is a false alarm due to before mount returns
successfully (context d), we can not access file therein via vfs_write
(context c).
Let's introduce per-sb cp_global_sem_key, and assign the key for
cp_global_sem, so that lockdep can recognize cp_global_sem from
different super block correctly.
A lot of work are done by Shin'ichiro Kawasaki, thanks a lot for
the work.
Fixes: c426d99127 ("f2fs: Check write pointer consistency of open zones")
Cc: stable@kernel.org
Reported-and-tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/linux-f2fs-devel/20260218125237.3340441-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Data loss can occur when fsync is performed on a newly created file
(before any checkpoint has been written) concurrently with a checkpoint
operation. The scenario is as follows:
create & write & fsync 'file A' write checkpoint
- f2fs_do_sync_file // inline inode
- f2fs_write_inode // inode folio is dirty
- f2fs_write_checkpoint
- f2fs_flush_merged_writes
- f2fs_sync_node_pages
- f2fs_flush_nat_entries
- f2fs_fsync_node_pages // no dirty node
- f2fs_need_inode_block_update // return false
SPO and lost 'file A'
f2fs_flush_nat_entries() sets the IS_CHECKPOINTED and HAS_LAST_FSYNC
flags for the nat_entry, but this does not mean that the checkpoint has
actually completed successfully. However, f2fs_need_inode_block_update()
checks these flags and incorrectly assumes that the checkpoint has
finished.
The root cause is that the semantics of IS_CHECKPOINTED and
HAS_LAST_FSYNC are only guaranteed after the checkpoint write fully
completes.
This patch modifies f2fs_need_inode_block_update() to acquire the
sbi->node_write lock before reading the nat_entry flags, ensuring that
once IS_CHECKPOINTED and HAS_LAST_FSYNC are observed to be set, the
checkpoint operation has already completed.
Fixes: e05df3b115 ("f2fs: add node operations")
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In age-based victim selection (ATGC, AT_SSR, or GC_CB), f2fs_get_victim
can encounter sections with zero valid blocks. This situation often
arises when checkpoint is disabled or due to race conditions between
SIT updates and dirty list management.
In such cases, f2fs_get_section_mtime() returns INVALID_MTIME, which
subsequently triggers a fatal f2fs_bug_on(sbi, mtime == INVALID_MTIME)
in add_victim_entry() or get_cb_cost().
This patch adds a check in f2fs_get_victim's selection loop to skip
sections with no valid blocks. This prevents unnecessary age
calculations for empty sections and avoids the associated kernel panic.
This change also allows removing redundant checks in add_victim_entry().
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When f2fs_fiemap() is called with `fileinfo->fi_flags` containing the
FIEMAP_FLAG_SYNC flag, it attempts to write data to disk before
retrieving file mappings via filemap_write_and_wait(). However, there is
an issue where the file does not get mapped as expected. The following
scenario can occur:
root@vm:/mnt/f2fs# dd if=/dev/zero of=data.3k bs=3k count=1
root@vm:/mnt/f2fs# xfs_io data.3k -c "fiemap -v 0 4096"
data.3k:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..5]: 0..5 6 0x307
The root cause of this issue is that f2fs_write_single_data_page() only
calls f2fs_write_inline_data() to copy data from the data folio to the
inode folio, and it clears the dirty flag on the data folio. However, it
does not mark the data folio as writeback. When
__filemap_fdatawait_range() checks for folios with the writeback flag,
it returns early, causing f2fs_fiemap() to report that the file has no
mapping.
To fix this issue, the solution is to call
f2fs_write_single_node_folio() in f2fs_inline_data_fiemap() when
getting fiemap with FIEMAP_FLAG_SYNC flags. This patch ensures that the
inode folio is written back and the writeback process completes before
proceeding.
Cc: stable@kernel.org
Fixes: 9ffe0fb5f3 ("f2fs: handle inline data operations")
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
During FGGC node block migration, fsck may incorrectly treat the
migrated node block as fsync-written data.
The reproduction scenario:
root@vm:/mnt/f2fs# seq 1 2048 | xargs -n 1 ./test_sync // write inline inode and sync
root@vm:/mnt/f2fs# rm -f 1
root@vm:/mnt/f2fs# sync
root@vm:/mnt/f2fs# f2fs_io gc_range // move data block in sync mode and not write CP
SPO, "fsck --dry-run" find inode has already checkpointed but still
with DENT_BIT_SHIFT set
The root cause is that GC does not clear the dentry mark and fsync mark
during node block migration, leading fsck to misinterpret them as
user-issued fsync writes.
In BGGC mode, node block migration is handled by f2fs_sync_node_pages(),
which guarantees the dentry and fsync marks are cleared before writing.
This patch move the set/clear of the fsync|dentry marks into
__write_node_folio to make the logic clearer, and ensures the
fsync|dentry mark is cleared in FGGC.
Cc: stable@kernel.org
Fixes: da011cc0da ("f2fs: move node pages only in victim section during GC")
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_need_dentry_mark() reads nat_entry flags without mutual exclusion
with the checkpoint path, which can result in an incorrect inode block
marking state. The scenario is as follows:
create & write & fsync 'file A' write checkpoint
- f2fs_do_sync_file // inline inode
- f2fs_write_inode // inode folio is dirty
- f2fs_write_checkpoint
- f2fs_flush_merged_writes
- f2fs_sync_node_pages
- f2fs_fsync_node_pages // no dirty node
- f2fs_need_inode_block_update // return true
- f2fs_fsync_node_pages // inode dirtied
- f2fs_need_dentry_mark //return true
- f2fs_flush_nat_entries
- f2fs_write_checkpoint end
- __write_node_folio // inode with DENT_BIT_SHIFT set
SPO, "fsck --dry-run" find inode has already checkpointed but still
with DENT_BIT_SHIFT set
The state observed by f2fs_need_dentry_mark() can differ from the state
observed in __write_node_folio() after acquiring sbi->node_write. The
root cause is that the semantics of IS_CHECKPOINTED and
HAS_FSYNCED_INODE are only guaranteed after the checkpoint write has
fully completed.
This patch moves set_dentry_mark() into __write_node_folio() and
protects it with the sbi->node_write lock.
Cc: stable@kernel.org
Fixes: 88bd02c947 ("f2fs: fix conditions to remain recovery information in f2fs_sync_file")
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch refactors the node footer flag setting code to simplify
redundant logic and adjust function parameters and return types. No
logical changes.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Let's use more generic f2fs_stop_checkpoint() instead of
f2fs_handle_critical_error() to handle critical error in f2fs.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_handle_page_eio() is the only left place we set CP_ERROR_FLAG
directly, it missed to update superblock.s_stop_reason, let's
call f2fs_handle_critical_error() instead to fix that.
Introduce STOP_CP_REASON_READ_{META,NODE,DATA} stop_cp_reason enum
variable to indicate which kind of data we failed to read.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_update_inode() reads inode->i_blocks without holding i_lock to
serialize it to the on-disk inode, while concurrent truncate or
allocation paths may modify i_blocks under i_lock. Since blkcnt_t is
u64, this risks torn reads on 32-bit architectures.
Following the approach in ext4_inode_blocks_set(), add READ_ONCE() to prevent
potential compiler-induced tearing.
Fixes: 19f99cee20 ("f2fs: add core inode operations")
Cc: stable@vger.kernel.org
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The ri parameter in truncate_partial_nodes() is unused. Remove it along
with the related code. No logical changes.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_fiemap() calls f2fs_map_blocks() to obtain the block mapping a
file, and then merges contiguous mappings into extents. If the mapping
is found in the read extent cache, node blocks do not need to be read.
However, in the following scenario, a contiguous extent can be split
into two extents:
$ dd if=/dev/zero of=data.128M bs=1M count=128
$ losetup -f data.128M
$ mkfs.f2fs /dev/loop0 -f
$ mount -o mode=lfs /dev/loop0 /mnt/f2fs/
$ cd /mnt/f2fs/
$ dd if=/dev/zero of=data.72M bs=1M count=72 && sync
$ dd if=/dev/zero of=data.4M bs=1M count=4 && sync
$ dd if=/dev/zero of=data.4M bs=1M count=2 seek=2 conv=notrunc && sync
$ echo 3 > /proc/sys/vm/drop_caches
$ dd if=/dev/zero of=data.4M bs=1M count=2 seek=0 conv=notrunc && sync
$ dd if=/dev/zero of=data.4M bs=1M count=2 seek=0 conv=notrunc && sync
$ f2fs_io fiemap 0 1024 data.4M
Fiemap: offset = 0 len = 1024
logical addr. physical addr. length flags
0 0000000000000000 0000000006400000 0000000000200000 00001000
1 0000000000200000 0000000006600000 0000000000200000 00001001
Although the physical addresses of the ranges 0～2MB and 2M～4MB are
contiguous, the mapping for the 2M～4MB range is not present in memory.
When the physical addresses for the 0～2MB range are updated, no merge
happens because the adjacent mapping is missing from the in-memory
cache. As a result, fiemap reports two separate extents instead of a
single contiguous one.
The root cause is that the read extent cache does not guarantee that all
blocks of an extent are present in memory. Therefore, when the extent
length returned by f2fs_map_blocks_cached() is smaller than maxblocks,
the remaining mappings are retrieved via f2fs_get_dnode_of_data() to
ensure correct fiemap extent boundary handling.
Cc: stable@kernel.org
Fixes: cd8fc5226b ("f2fs: remove the create argument to f2fs_map_blocks")
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When f2fs_map_blocks()->f2fs_map_blocks_cached() hits the read extent
cache, map->m_multidev_dio is not updated, which leads to incorrect
multidevice information being reported by trace_f2fs_map_blocks().
This patch updates map->m_multidev_dio in f2fs_map_blocks_cached() when
the read extent cache is hit.
Cc: stable@kernel.org
Fixes: 0094e98bd1 ("f2fs: factor a f2fs_map_blocks_cached helper")
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_compress_write_end_io(), dec_page_count(sbi, type) can bring
the F2FS_WB_CP_DATA counter to zero, unblocking
f2fs_wait_on_all_pages() in f2fs_put_super() on a concurrent unmount
CPU. The unmount path then proceeds to call
f2fs_destroy_page_array_cache(sbi), which destroys
sbi->page_array_slab via kmem_cache_destroy(), and eventually
kfree(sbi). Meanwhile, the bio completion callback is still executing:
when it reaches page_array_free(sbi, ...), it dereferences
sbi->page_array_slab — a destroyed slab cache — to call
kmem_cache_free(), causing a use-after-free.
This is the same class of bug as CVE-2026-23234 (which fixed the
equivalent race in f2fs_write_end_io() in data.c), but in the
compressed writeback completion path that was not covered by that fix.
Fix this by moving dec_page_count() to after page_array_free(), so
that all sbi accesses complete before the counter decrement that can
unblock unmount. For non-last folios (where atomic_dec_return on
cic->pending_pages is nonzero), dec_page_count is called immediately
before returning — page_array_free is not reached on this path, so
there is no post-decrement sbi access. For the last folio,
page_array_free runs while the F2FS_WB_CP_DATA counter is still
nonzero (this folio has not yet decremented it), keeping sbi alive,
and dec_page_count runs as the final operation.
Fixes: 4c8ff7095b ("f2fs: support data compression")
Cc: stable@vger.kernel.org
Signed-off-by: George Saad <geoo115@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The sbi parameter in f2fs_in_warm_node_list() is not used. Remove it to
simplify the function.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The xfstests case "generic/107" and syzbot have both reported a NULL
pointer dereference.
The concurrent scenario that triggers the panic is as follows:
F2FS_WB_CP_DATA write callback umount
- f2fs_write_checkpoint
- f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA)
- blk_mq_end_request
- bio_endio
- f2fs_write_end_io
: dec_page_count(sbi, F2FS_WB_CP_DATA)
: wake_up(&sbi->cp_wait)
- kill_f2fs_super
- kill_block_super
- f2fs_put_super
: iput(sbi->node_inode)
: sbi->node_inode = NULL
: f2fs_in_warm_node_list
- is_node_folio // sbi->node_inode is NULL and panic
The root cause is that f2fs_put_super() calls iput(sbi->node_inode) and
sets sbi->node_inode to NULL after sbi->nr_pages[F2FS_WB_CP_DATA] is
decremented to zero. As a result, f2fs_in_warm_node_list() may
dereference a NULL node_inode when checking whether a folio belongs to
the node inode, leading to a panic.
This patch fixes the issue by calling f2fs_in_warm_node_list() before
decrementing sbi->nr_pages[F2FS_WB_CP_DATA], thus preventing the
use-after-free condition.
Cc: stable@kernel.org
Fixes: 50fa53eccf ("f2fs: fix to avoid broken of dnode block list")
Reported-by: syzbot+6e4cb1cac5efc96ea0ca@syzkaller.appspotmail.com
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We found the following issue during fuzz testing:
page: refcount:3 mapcount:0 mapping:00000000b6e89c65 index:0x18b2dc pfn:0x161ba9
memcg:f8ffff800e269c00
aops:f2fs_meta_aops ino:2
flags: 0x52880000000080a9(locked|waiters|uptodate|lru|private|zone=1|kasantag=0x4a)
raw: 52880000000080a9 fffffffec6e17588 fffffffec0ccc088 a7ffff8067063618
raw: 000000000018b2dc 0000000000000009 00000003ffffffff f8ffff800e269c00
page dumped because: VM_BUG_ON_FOLIO(folio_test_uptodate(folio))
page_owner tracks the page as allocated
post_alloc_hook+0x58c/0x5ec
prep_new_page+0x34/0x284
get_page_from_freelist+0x2dcc/0x2e8c
__alloc_pages_noprof+0x280/0x76c
__folio_alloc_noprof+0x18/0xac
__filemap_get_folio+0x6bc/0xdc4
pagecache_get_page+0x3c/0x104
do_garbage_collect+0x5c78/0x77a4
f2fs_gc+0xd74/0x25f0
gc_thread_func+0xb28/0x2930
kthread+0x464/0x5d8
ret_from_fork+0x10/0x20
------------[ cut here ]------------
kernel BUG at mm/filemap.c:1563!
folio_end_read+0x140/0x168
f2fs_finish_read_bio+0x5c4/0xb80
f2fs_read_end_io+0x64c/0x708
bio_endio+0x85c/0x8c0
blk_update_request+0x690/0x127c
scsi_end_request+0x9c/0xb8c
scsi_io_completion+0xf0/0x250
scsi_finish_command+0x430/0x45c
scsi_complete+0x178/0x6d4
blk_mq_complete_request+0xcc/0x104
scsi_done_internal+0x214/0x454
scsi_done+0x24/0x34
which is similar to the problem reported by syzbot:
https://syzkaller.appspot.com/bug?extid=3686758660f980b402dc
This case is consistent with the description in commit 9bf1a3f
("f2fs: avoid GC causing encrypted file corrupted"):
Page 1 is moved from blkaddr A to blkaddr B by move_data_block, and after
being written it is marked as uptodate. Then, Page 1 is moved from blkaddr
B to blkaddr C, VM_BUG_ON_FOLIO was triggered in the endio initiated by
ra_data_block.
There is no need to read Page 1 again from blkaddr B, since it has already
been updated. Therefore, avoid initiating I/O in this case.
Fixes: 6aa58d8ad2 ("f2fs: readahead encrypted block during GC")
Signed-off-by: Jianan Huang <huangjianan@xiaomi.com>
Signed-off-by: Sheng Yong <shengyong1@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When `fileinfo->fi_flags` does not have the `FIEMAP_FLAG_SYNC` bit set
and inline data has not been persisted yet, the physical address of the
extent is calculated incorrectly for unwritten inline inodes.
root@vm:/mnt/f2fs# dd if=/dev/zero of=data.3k bs=3k count=1
root@vm:/mnt/f2fs# f2fs_io fiemap 0 100 data.3k
Fiemap: offset = 0 len = 100
logical addr. physical addr. length flags
0 0000000000000000 00000ffffffff16c 0000000000000c00 00000301
This patch fixes the issue by checking if the inode's address is valid.
If the inline inode is unwritten, set the physical address to 0 and
mark the extent with `FIEMAP_EXTENT_UNKNOWN | FIEMAP_EXTENT_DELALLOC`
flags.
Cc: stable@kernel.org
Fixes: 67f8cf3cee ("f2fs: support fiemap for inline_data")
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
During the f2fs_get_victim process, when the f2fs_need_rand_seg is enabled in select_policy,
p->offset is a random value, and the search range is from p->offset to MAIN_SECS.
When segno >= last_segment, the loop breaks and exits directly without searching
the range from 0 to p->offset.This results in an incomplete search when the random
offset is not zero.
Signed-off-by: liujinbao1 <liujinbao1@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Since commit 52e7e0d889 ("fscrypt: Switch to sync_skcipher and
on-stack requests") eliminated the dynamic allocation of crypto
requests, the only remaining dynamic memory allocation done by
fscrypt_encrypt_pagecache_blocks() is the bounce page allocation.
The bounce page is allocated from a mempool. Mempool allocations with
GFP_NOFS never fail. Therefore, fscrypt_encrypt_pagecache_blocks() can
no longer return -ENOMEM when passed GFP_NOFS.
Remove the now-unreachable code from f2fs_encrypt_one_page().
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/all/d9dc2ee1-283d-4467-ad36-a6a4aa557589@suse.cz/
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Pull MM fixes from Andrew Morton:
"6 hotfixes. 2 are cc:stable. All are for MM.
All are singletons - please see the changelogs for details"
* tag 'mm-hotfixes-stable-2026-03-23-17-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/damon/stat: monitor all System RAM resources
mm/zswap: add missing kunmap_local()
mailmap: update email address for Muhammad Usama Anjum
zram: do not slot_free() written-back slots
mm/damon/core: avoid use of half-online-committed context
mm/rmap: clear vma->anon_vma on error
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix parsing 'overwrite' in command line event definitions in
big-endian machines by writing correct union member
- Fix finding default metric in 'perf stat'
- Fix relative paths for including headers in 'perf kvm stat'
- Sync header copies with the kernel sources: msr-index.h, kvm,
build_bug.h
* tag 'perf-tools-fixes-for-v7.0-2-2026-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools headers: Synchronize linux/build_bug.h with the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf kvm stat: Fix relative paths for including headers
perf parse-events: Fix big-endian 'overwrite' by writing correct union member
perf metricgroup: Fix metricgroup__has_metric_or_groups()
tools headers: Skip arm64 cputype.h check
Pull media fixes from Mauro Carvalho Chehab:
- rkvdec: fix stack usage with clang and improve handling missing
short/long term RPS
- synopsys: fix a Kconfig issue and an out-of-bounds check
- verisilicon: Fix kernel panic due to __initconst misuse
- media core: serialize REINIT and REQBUFS with req_queue_mutex
* tag 'media/v7.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: verisilicon: Fix kernel panic due to __initconst misuse
media: rkvdec: reduce stack usage in rkvdec_init_v4l2_vp9_count_tbl()
media: rkvdec: reduce excessive stack usage in assemble_hw_pps()
media: rkvdec: Improve handling missing short/long term RPS
media: mc, v4l2: serialize REINIT and REQBUFS with req_queue_mutex
media: synopsys: csi2rx: add missing kconfig dependency
media: synopsys: csi2rx: fix out-of-bounds check for formats array
Pull xen fixes from Juergen Gross:
"Restrict the xen privcmd driver in unprivileged domU to only allow
hypercalls to target domain when using secure boot"
* tag 'xsa482-7.0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/privcmd: add boot control for restricted usage in domU
xen/privcmd: restrict usage in unprivileged domU
DAMON_STAT usage document (Documentation/admin-guide/mm/damon/stat.rst)
says it monitors the system's entire physical memory. But, it is
monitoring only the biggest System RAM resource of the system. When there
are multiple System RAM resources, this results in monitoring only an
unexpectedly small fraction of the physical memory. For example, suppose
the system has a 500 GiB System RAM, 10 MiB non-System RAM, and 500 GiB
System RAM resources in order on the physical address space. DAMON_STAT
will monitor only the first 500 GiB System RAM. This situation is
particularly common on NUMA systems.
Select a physical address range that covers all System RAM areas of the
system, to fix this issue and make it work as documented.
[sj@kernel.org: return error if monitoring target region is invalid]
Link: https://lkml.kernel.org/r/20260317053631.87907-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20260316235118.873-1-sj@kernel.org
Fixes: 369c415e60 ("mm/damon: introduce DAMON_STAT module")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit e2c3b6b21c ("mm: zswap: use SG list decompression APIs from
zsmalloc") updated zswap_decompress() to use the scatterwalk API to copy
data for uncompressed pages.
In doing so, it mapped kernel memory locally for 32-bit kernels using
kmap_local_folio(), however it never unmapped this memory.
This resulted in the linked syzbot report where a BUG_ON() is triggered
due to leaking the kmap slot.
This patch fixes the issue by explicitly unmapping the established kmap.
Also, add flush_dcache_folio() after the kunmap_local() call
I had assumed that a new folio here combined with the flush that is done at
the point of setting the PTE would suffice, but it doesn't seem that's
actually the case, as update_mmu_cache() will in many archtectures only
actually flush entries where a dcache flush was done on a range previously.
I had also wondered whether kunmap_local() might suffice, but it doesn't
seem to be the case.
Some arches do seem to actually dcache flush on unmap, parisc does it if
CONFIG_HIGHMEM is not set by setting ARCH_HAS_FLUSH_ON_KUNMAP and calling
kunmap_flush_on_unmap() from __kunmap_local(), otherwise non-CONFIG_HIGHMEM
callers do nothing here.
Otherwise arch_kmap_local_pre_unmap() is called which does:
* sparc - flush_cache_all()
* arm - if VIVT, __cpuc_flush_dcache_area()
* otherwise - nothing
Also arch_kmap_local_post_unmap() is called which does:
* arm - local_flush_tlb_kernel_page()
* csky - kmap_flush_tlb()
* microblaze, ppc - local_flush_tlb_page()
* mips - local_flush_tlb_one()
* sparc - flush_tlb_all() (again)
* x86 - arch_flush_lazy_mmu_mode()
* otherwise - nothing
But this is only if it's high memory, and doesn't cover all architectures,
so is presumably intended to handle other cache consistency concerns.
In any case, VIPT is problematic here whether low or high memory (in spite
of what the documentation claims, see [0] - 'the kernel did write to a page
that is in the page cache page and / or in high memory'), because dirty
cache lines may exist at the set indexed by the kernel direct mapping,
which won't exist in the set indexed by any subsequent userland mapping,
meaning userland might read stale data from L2 cache.
Even if the documentation is correct and low memory is fine not to be
flushed here, we can't be sure as to whether the memory is low or high
(kmap_local_folio() will be a no-op if low), and this call should be
harmless if it is low.
VIVT would require more work if the memory were shared and already mapped,
but this isn't the case here, and would anyway be handled by the dcache
flush call.
In any case, we definitely need this flush as far as I can tell.
And we should probably consider updating the documentation unless it turns
out there's somehow dcache synchronisation that happens for low
memory/64-bit kernels elsewhere?
[ljs@kernel.org: add flush_dcache_folio() after the kunmap_local() call]
Link: https://lkml.kernel.org/r/13e09a99-181f-45ac-a18d-057faf94bccb@lucifer.local
Link: https://lkml.kernel.org/r/20260316140122.339697-1-ljs@kernel.org
Link: https://docs.kernel.org/core-api/cachetlb.html [0]
Fixes: e2c3b6b21c ("mm: zswap: use SG list decompression APIs from zsmalloc")
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Reported-by: syzbot+fe426bef95363177631d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/69b75e2c.050a0220.12d28.015a.GAE@google.com
Acked-by: Yosry Ahmed <yosry@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Acked-by: Yosry Ahmed <yosry@kernel.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To pick up the changes in:
6ffd853b0b ("build_bug.h: correct function parameters names in kernel-doc")
That just add some comments, addressing this perf tools build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/linux/build_bug.h include/linux/build_bug.h
Please take a look at tools/include/uapi/README for further info on this
synchronization process.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
e2ffe85b6d ("KVM: x86: Introduce KVM_X86_QUIRK_VMCS12_ALLOW_FREEZE_IN_SMM")
That just rebuilds kvm-stat.c on x86, no change in functionality.
This silences these perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Please see tools/include/uapi/README for further details.
Cc: Jim Mattson <jmattson@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
da142f3d37 ("KVM: Remove subtle "struct kvm_stats_desc" pseudo-overlay")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the 'perf trace' ioctl syscall argument beautifiers.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Please see tools/include/uapi/README for further details.
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes from these csets:
9073428bb2 ("x86/sev: Allow IBPB-on-Entry feature for SNP guests")
That cause no changes to tooling as it doesn't include a new MSR to be
captured by the tools/perf/trace/beauty/tracepoints/x86_msr.sh script.
Just silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull bpf fixes from Alexei Starovoitov:
- Fix how linked registers track zero extension of subregisters (Daniel
Borkmann)
- Fix unsound scalar fork for OR instructions (Daniel Wade)
- Fix exception exit lock check for subprogs (Ihor Solodrai)
- Fix undefined behavior in interpreter for SDIV/SMOD instructions
(Jenny Guanni Qu)
- Release module's BTF when module is unloaded (Kumar Kartikeya
Dwivedi)
- Fix constant blinding for PROBE_MEM32 instructions (Sachin Kumar)
- Reset register ID for END instructions to prevent incorrect value
tracking (Yazhou Tang)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add a test cases for sync_linked_regs regarding zext propagation
bpf: Fix sync_linked_regs regarding BPF_ADD_CONST32 zext propagation
selftests/bpf: Add tests for maybe_fork_scalars() OR vs AND handling
bpf: Fix unsound scalar forking in maybe_fork_scalars() for BPF_OR
selftests/bpf: Add tests for sdiv32/smod32 with INT_MIN dividend
bpf: Fix undefined behavior in interpreter sdiv/smod for INT_MIN
selftests/bpf: Add tests for bpf_throw lock leak from subprogs
bpf: Fix exception exit lock checking for subprogs
bpf: Release module BTF IDR before module unload
selftests/bpf: Fix pkg-config call on static builds
bpf: Fix constant blinding for PROBE_MEM32 stores
selftests/bpf: Add test for BPF_END register ID reset
bpf: Reset register ID for BPF_END value tracking
Pull tracing fixes from Steven Rostedt:
- Revert "tracing: Remove pid in task_rename tracing output"
A change was made to remove the pid field from the task_rename event
because it was thought that it was always done for the current task
and recording the pid would be redundant. This turned out to be
incorrect and there are a few corner case where this is not true and
caused some regressions in tooling.
- Fix the reading from user space for migration
The reading of user space uses a seq lock type of logic where it uses
a per-cpu temporary buffer and disables migration, then enables
preemption, does the copy from user space, disables preemption,
enables migration and checks if there was any schedule switches while
preemption was enabled. If there was a context switch, then it is
considered that the per-cpu buffer could be corrupted and it tries
again. There's a protection check that tests if it takes a hundred
tries, it issues a warning and exits out to prevent a live lock.
This was triggered because the task was selected by the load balancer
to be migrated to another CPU, every time preemption is enabled the
migration task would schedule in try to migrate the task but can't
because migration is disabled and let it run again. This caused the
scheduler to schedule out the task every time it enabled preemption
and made the loop never exit (until the 100 iteration test
triggered).
Fix this by enabling and disabling preemption and keeping migration
enabled if the reading from user space needs to be done again. This
will let the migration thread migrate the task and the copy from user
space will likely pass on the next iteration.
- Fix trace_marker copy option freeing
The "copy_trace_marker" option allows a tracing instance to get a
copy of a write to the trace_marker file of the top level instance.
This is managed by a link list protected by RCU. When an instance is
removed, a check is made if the option is set, and if so
synchronized_rcu() is called.
The problem is that an iteration is made to reset all the flags to
what they were when the instance was created (to perform clean ups)
was done before the check of the copy_trace_marker option and that
option was cleared, so the synchronize_rcu() was never called.
Move the clearing of all the flags after the check of
copy_trace_marker to do synchronize_rcu() so that the option is still
set if it was before and the synchronization is performed.
- Fix entries setting when validating the persistent ring buffer
When validating the persistent ring buffer on boot up, the number of
events per sub-buffer is added to the sub-buffer meta page. The
validator was updating cpu_buffer->head_page (the first sub-buffer of
the per-cpu buffer) and not the "head_page" variable that was
iterating the sub-buffers. This was causing the first sub-buffer to
be assigned the entries for each sub-buffer and not the sub-buffer
that was supposed to be updated.
- Use "hash" value to update the direct callers
When updating the ftrace direct callers, it assigned a temporary
callback to all the callback functions of the ftrace ops and not just
the functions represented by the passed in hash. This causes an
unnecessary slow down of the functions of the ftrace_ops that is not
being modified. Only update the functions that are going to be
modified to call the ftrace loop function so that the update can be
made on those functions.
* tag 'trace-v7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Use hash argument for tmp_ops in update_ftrace_direct_mod
ring-buffer: Fix to update per-subbuf entries of persistent ring buffer
tracing: Fix trace_marker copy link list updates
tracing: Fix failure to read user space from system call trace events
tracing: Revert "tracing: Remove pid in task_rename tracing output"
Pull i2c fixes from Wolfram Sang:
- fix broken I2C communication on Armada 3700 with recovery
- fix device_node reference leak in probe (fsi)
- fix NULL-deref when serial string is missing (cp2615)
* tag 'i2c-for-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: pxa: defer reset on Armada 3700 when recovery is used
i2c: fsi: Fix a potential leak in fsi_i2c_probe()
i2c: cp2615: fix serial string NULL-deref at probe
Pull x86 fixes from Ingo Molnar:
- Improve Qemu MCE-injection behavior by only using AMD SMCA MSRs if
the feature bit is set
- Fix the relative path of gettimeofday.c inclusion in vclock_gettime.c
- Fix a boot crash on UV clusters when a socket is marked as
'deconfigured' which are mapped to the SOCK_EMPTY node ID by
the UV firmware, while Linux APIs expect NUMA_NO_NODE.
The difference being (0xffff [unsigned short ~0]) vs [int -1]
* tag 'x86-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/uv: Handle deconfigured sockets
x86/entry/vdso: Fix path of included gettimeofday.c
x86/mce/amd: Check SMCA feature bit before accessing SMCA MSRs
Pull perf fixes from Ingo Molnar:
- Fix a PMU driver crash on AMD EPYC systems, caused by
a race condition in x86_pmu_enable()
- Fix a possible counter-initialization bug in x86_pmu_enable()
- Fix a counter inheritance bug in inherit_event() and
__perf_event_read()
- Fix an Intel PMU driver branch constraints handling bug
found by UBSAN
- Fix the Intel PMU driver's new Off-Module Response (OMR)
support code for Diamond Rapids / Nova lake, to fix a snoop
information parsing bug
* tag 'perf-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix OMR snoop information parsing issues
perf/x86/intel: Add missing branch counters constraint apply
perf: Make sure to use pmu_ctx->pmu for groups
x86/perf: Make sure to program the counter value for stopped events on migration
perf/x86: Move event pointer setup earlier in x86_pmu_enable()
