The validation done at the start of dlpar_memory_add_by_ic() is an all
of nothing scenario - if any LMBs in the range is marked as RESERVED we
can fail right away.
We then can remove the 'lmbs_available' var and its check with
'lmbs_to_add' since the whole LMB range was already validated in the
previous step.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210622133923.295373-4-danielhb413@gmail.com
After a successful dlpar_add_lmb() call the LMB is marked as reserved.
Later on, depending whether we added enough LMBs or not, we rely on
the marked LMBs to see which ones might need to be removed, and we
remove the reservation of all of them.
These are done in for_each_drmem_lmb() loops without any break
condition. This means that we're going to check all LMBs of the partition
even after going through all the reserved ones.
This patch adds break conditions in both loops to avoid this. The
'lmbs_added' variable was renamed to 'lmbs_reserved', and it's now
being decremented each time a lmb reservation is removed, indicating
if there are still marked LMBs to be processed.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210622133923.295373-3-danielhb413@gmail.com
printk_safe_flush_on_panic() has special lock breaking code for the case
where we panic()ed with the console lock held. It relies on panic IPI
causing other CPUs to mark themselves offline.
Do as most other architectures do.
This effectively reverts commit de6e5d3841 ("powerpc: smp_send_stop do
not offline stopped CPUs"), unfortunately it may result in some false
positive warnings, but the alternative is more situations where we can
crash without getting messages out.
Fixes: de6e5d3841 ("powerpc: smp_send_stop do not offline stopped CPUs")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210623041245.865134-1-npiggin@gmail.com
PowerVM will not arbitrarily oversubscribe or stop guests, page out the
guest kernel text to a NFS volume connected by carrier pigeon to abacus
based storage, etc., as a KVM host might. So PowerVM guests are not
likely to be killed by the hard lockup watchdog in normal operation,
even with shared processor LPARs which still get a minimum allotment of
CPU time.
Enable the hard lockup detector by default on !KVM guests, which we will
assume is PowerVM. It has been useful in finding problems on bare metal
kernels.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210623021528.702241-1-npiggin@gmail.com
The PPC_RFI_SRR_DEBUG check added by patch "powerpc/64s: avoid reloading
(H)SRR registers if they are still valid" has a few deficiencies. It
does not fix the actual problem, it's not enabled by default, and it
causes a program check interrupt which can cause more difficulties.
However there are a lot of paths which may clobber SRRs or change return
regs, and difficult to have a high confidence that all paths are covered
without wider testing.
Add a relatively low overhead always-enabled check that catches most
such cases, reports once, and fixes it so the kernel can continue.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Rebase, use switch & INT names, squash in race fix from Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use the restart table facility to return from interrupt or system calls
without disabling MSR[EE] or MSR[RI].
Interrupt return asm is put into the low soft-masked region, to prevent
interrupts being processed here, although they are still taken as masked
interrupts which causes SRRs to be clobbered, and a pending soft-masked
interrupt to require replaying.
The return code uses restart table regions to redirct to a fixup handler
rather than continue with the exit, if such an interrupt happens. In
this case the interrupt return is redirected to a fixup handler which
reloads r1 for the interrupt stack and reloads registers and sets state
up to replay the soft-masked interrupt and try the exit again.
Some types of security exit fallback flushes and barriers are currently
unable to cope with reentrant interrupts, e.g., because they store some
state in the scratch SPR which would be clobbered even by masked
interrupts. For now the interrupts-enabled exits are disabled when these
flushes are used.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Guard unused exit_must_hard_disable() as reported by lkp]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210617155116.2167984-13-npiggin@gmail.com
Prevent interrupt restore from allowing racing hard interrupts going
ahead of previous soft-pending ones, by using the soft-masked restart
handler to allow a store to clear the soft-mask while knowing nothing
is soft-pending.
This probably doesn't matter much in practice, but it's a simple
demonstrator / test case to exercise the restart table logic.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210617155116.2167984-11-npiggin@gmail.com
The exception table fixup adjusts a failed page fault's interrupt return
location if it was taken at an address specified in the exception table,
to a corresponding fixup handler address.
Introduce a variation of that idea which adds a fixup table for NMIs and
soft-masked asynchronous interrupts. This will be used to protect
certain critical sections that are sensitive to being clobbered by
interrupts coming in (due to using the same SPRs and/or irq soft-mask
state).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210617155116.2167984-10-npiggin@gmail.com
When an interrupt is taken, the SRR registers are set to return to where
it left off. Unless they are modified in the meantime, or the return
address or MSR are modified, there is no need to reload these registers
when returning from interrupt.
Introduce per-CPU flags that track the validity of SRR and HSRR
registers. These are cleared when returning from interrupt, when
using the registers for something else (e.g., OPAL calls), when
adjusting the return address or MSR of a context, and when context
switching (which changes the return address and MSR).
This improves the performance of interrupt returns.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fold in fixup patch from Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210617155116.2167984-5-npiggin@gmail.com
Pass the value of linux_banner to firmware via option vector 7.
Option vector 7 is described in "LoPAR" Linux on Power Architecture
Reference v2.9, in table B.7 on page 824:
An ASCII character formatted null terminated string that describes
the client operating system. The string shall be human readable and
may be displayed on the console.
The string can be up to 256 bytes total, including the nul terminator.
linux_banner contains lots of information, and should make it possible
to identify the exact kernel version that is running:
const char linux_banner[] =
"Linux version " UTS_RELEASE " (" LINUX_COMPILE_BY "@"
LINUX_COMPILE_HOST ") (" LINUX_COMPILER ") " UTS_VERSION "\n";
For example:
Linux version 4.15.0-144-generic (buildd@bos02-ppc64el-018) (gcc
version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #148-Ubuntu SMP Sat May 8
02:32:13 UTC 2021 (Ubuntu 4.15.0-144.148-generic 4.15.18)
It's also printed at boot to the console/dmesg, which should make it
possible to correlate what firmware receives with the console/dmesg on
the machine.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210621064938.2021419-2-mpe@ellerman.id.au
When using the Radix MMU our PGD is always 64K, and must be naturally
aligned.
For a 4K page size kernel that means page alignment of swapper_pg_dir is
not sufficient, leading to failure to boot.
Use the existing MAX_PTRS_PER_PGD which has the correct value, and
avoids us hard-coding 64K here.
Fixes: e72421a085 ("powerpc: Define swapper_pg_dir[] in C")
Reported-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210624123420.2784187-1-mpe@ellerman.id.au
Enable support for process-scoped invalidations from nested
guests and partition-scoped invalidations for nested guests.
Process-scoped invalidations for any level of nested guests
are handled by implementing H_RPT_INVALIDATE handler in the
nested guest exit path in L0.
Partition-scoped invalidation requests are forwarded to the
right nested guest, handled there and passed down to L0
for eventual handling.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
[aneesh: Nested guest partition-scoped invalidation changes]
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Squash in fixup patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210621085003.904767-5-bharata@linux.ibm.com
H_RPT_INVALIDATE does two types of TLB invalidations:
1. Process-scoped invalidations for guests when LPCR[GTSE]=0.
This is currently not used in KVM as GTSE is not usually
disabled in KVM.
2. Partition-scoped invalidations that an L1 hypervisor does on
behalf of an L2 guest. This is currently handled
by H_TLB_INVALIDATE hcall and this new replaces the old that.
This commit enables process-scoped invalidations for L1 guests.
Support for process-scoped and partition-scoped invalidations
from/for nested guests will be added separately.
Process scoped tlbie invalidations from L1 and nested guests
need RS register for TLBIE instruction to contain both PID and
LPID. This patch introduces primitives that execute tlbie
instruction with both PID and LPID set in prepartion for
H_RPT_INVALIDATE hcall.
A description of H_RPT_INVALIDATE follows:
int64 /* H_Success: Return code on successful completion */
/* H_Busy - repeat the call with the same */
/* H_Parameter, H_P2, H_P3, H_P4, H_P5 : Invalid
parameters */
hcall(const uint64 H_RPT_INVALIDATE, /* Invalidate RPT
translation
lookaside information */
uint64 id, /* PID/LPID to invalidate */
uint64 target, /* Invalidation target */
uint64 type, /* Type of lookaside information */
uint64 pg_sizes, /* Page sizes */
uint64 start, /* Start of Effective Address (EA)
range (inclusive) */
uint64 end) /* End of EA range (exclusive) */
Invalidation targets (target)
-----------------------------
Core MMU 0x01 /* All virtual processors in the
partition */
Core local MMU 0x02 /* Current virtual processor */
Nest MMU 0x04 /* All nest/accelerator agents
in use by the partition */
A combination of the above can be specified,
except core and core local.
Type of translation to invalidate (type)
---------------------------------------
NESTED 0x0001 /* invalidate nested guest partition-scope */
TLB 0x0002 /* Invalidate TLB */
PWC 0x0004 /* Invalidate Page Walk Cache */
PRT 0x0008 /* Invalidate caching of Process Table
Entries if NESTED is clear */
PAT 0x0008 /* Invalidate caching of Partition Table
Entries if NESTED is set */
A combination of the above can be specified.
Page size mask (pages)
----------------------
4K 0x01
64K 0x02
2M 0x04
1G 0x08
All sizes (-1UL)
A combination of the above can be specified.
All page sizes can be selected with -1.
Semantics: Invalidate radix tree lookaside information
matching the parameters given.
* Return H_P2, H_P3 or H_P4 if target, type, or pageSizes parameters
are different from the defined values.
* Return H_PARAMETER if NESTED is set and pid is not a valid nested
LPID allocated to this partition
* Return H_P5 if (start, end) doesn't form a valid range. Start and
end should be a valid Quadrant address and end > start.
* Return H_NotSupported if the partition is not in running in radix
translation mode.
* May invalidate more translation information than requested.
* If start = 0 and end = -1, set the range to cover all valid
addresses. Else start and end should be aligned to 4kB (lower 11
bits clear).
* If NESTED is clear, then invalidate process scoped lookaside
information. Else pid specifies a nested LPID, and the invalidation
is performed on nested guest partition table and nested guest
partition scope real addresses.
* If pid = 0 and NESTED is clear, then valid addresses are quadrant 3
and quadrant 0 spaces, Else valid addresses are quadrant 0.
* Pages which are fully covered by the range are to be invalidated.
Those which are partially covered are considered outside
invalidation range, which allows a caller to optimally invalidate
ranges that may contain mixed page sizes.
* Return H_SUCCESS on success.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210621085003.904767-4-bharata@linux.ibm.com
Microwatt is a FPGA-based implementation of the Power ISA. It
currently only implements little-endian 64-bit mode, and does
not (yet) support SMP, VMX, VSX or transactional memory. It has an
optional FPU, and an optional MMU (required for running Linux,
obviously) which implements a configurable radix tree but not
hypervisor mode or nested radix translation.
This adds a new machine type to support FPGA-based SoCs with a
Microwatt core. CONFIG_MATH_EMULATION can be selected for Microwatt
SOCs which don't have the FPU.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YMwWbZVREsVug9R0@thinks.paulus.ozlabs.org
Use set_memory_attr() instead of the PPC32 specific change_page_attr()
change_page_attr() was checking that the address was not mapped by
blocks and was handling highmem, but that's unneeded because the
affected pages can't be in highmem and block mapping verification
is already done by the callers.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[ruscur: rebase on powerpc/merge with Christophe's new patches]
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210609013431.9805-10-jniethe5@gmail.com
In addition to the set_memory_xx() functions which allows to change
the memory attributes of not (yet) used memory regions, implement a
set_memory_attr() function to:
- set the final memory protection after init on currently used
kernel regions.
- enable/disable kernel memory regions in the scope of DEBUG_PAGEALLOC.
Unlike the set_memory_xx() which can act in three step as the regions
are unused, this function must modify 'on the fly' as the kernel is
executing from them. At the moment only PPC32 will use it and changing
page attributes on the fly is not an issue.
Reported-by: kbuild test robot <lkp@intel.com>
[ruscur: cast "data" to unsigned long instead of int]
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210609013431.9805-9-jniethe5@gmail.com
To enable strict module RWX on powerpc, set:
CONFIG_STRICT_MODULE_RWX=y
You should also have CONFIG_STRICT_KERNEL_RWX=y set to have any real
security benefit.
ARCH_HAS_STRICT_MODULE_RWX is set to require ARCH_HAS_STRICT_KERNEL_RWX.
This is due to a quirk in arch/Kconfig and arch/powerpc/Kconfig that
makes STRICT_MODULE_RWX *on by default* in configurations where
STRICT_KERNEL_RWX is *unavailable*.
Since this doesn't make much sense, and module RWX without kernel RWX
doesn't make much sense, having the same dependencies as kernel RWX
works around this problem.
Book3s/32 603 and 604 core processors are not able to write protect
kernel pages so do not set ARCH_HAS_STRICT_MODULE_RWX for Book3s/32.
[jpn: - predicate on !PPC_BOOK3S_604
- make module_alloc() use PAGE_KERNEL protection]
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210609013431.9805-8-jniethe5@gmail.com
