The late 2009, 27 inch Apple iMac10,1 has an
internal eDP display and an external Mini-
Displayport output, driven by a DCE-3.2, RV730
Radeon Mobility HD-4670.
The machine worked fine in a dual-display setup
with eDP panel + externally connected HDMI
or DVI-D digital display sink, connected via
MiniDP to DVI or HDMI adapter.
However, booting the machine single-display with
only eDP panel results in a completely black
display - even backlight powering off, as soon as
the radeon modesetting driver loads.
This patch fixes the single dispay eDP case by
assigning encoders based on dig->linkb, similar
to DCE-4+. While this should not be generally
necessary (Alex: "...atom on normal boards
should be able to handle any mapping."), Apple
seems to use some special routing here.
One remaining problem not solved by this patch
is that an external Minidisplayport->DP sink
does still not work on iMac10,1, whereas external
DVI and HDMI sinks continue to work.
The problem affects at least all tested kernels
since Linux 3.13 - didn't test earlier kernels, so
backporting to stable probably makes sense.
v2: With the original patch from 2016, Alex was worried it
will break other DCE3.2 systems. Use dmi_match() to
apply this special encoder assignment only for the
Apple iMac 10,1 from late 2009.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes for 4.13:
- Various fixes for Raven
- Various fixes for Vega10
- Stability fixes for KIQ
- Fix reloading the driver
- Fix S3 on vega10
- Misc other fixes
* 'drm-next-4.13' of git://people.freedesktop.org/~agd5f/linux: (26 commits)
drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu.
amdgpu: Set cik/si_support to 1 by default if radeon isn't built
drm/amdgpu/gfx9: fix driver reload with KIQ
drm/amdgpu/gfx8: fix driver reload with KIQ
drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay
drm/ttm: Fix use-after-free in ttm_bo_clean_mm
drm/amd/amdgpu: move get memory type function from early init to sw init
drm/amdgpu/cgs: always set reference clock in mode_info
drm/amdgpu: fix vblank_time when displays are off
drm/amd/powerplay: power value format change for Vega10
drm/amdgpu/gfx9: support the amdgpu.disable_cu option
drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10
drm/amdgpu: Make amdgpu_cs_parser_init static (v2)
drm/amdgpu/cs: fix a typo in a comment
drm/amdgpu: Fix the exported always on CU bitmap
drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static
drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup
drm/amd/powerplay/cz: print message if smc message fails
drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init
drm/amdgpu: enable mmhub pg on raven
...
Drop the KCQ disabling via KIQ. We disable the MEC shortly
after anyway, so there is no need to wait for all of this.
Doing so seems to leave the MEC in a bad way.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop the deactivation in KIQ init and drop the KCQ disabling
via KIQ. We disable the MEC shortly after anyway, so there is
no need to wait for all of this. Doing so seems to leave the
MEC in a bad way.
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The debugfs interface has calls a function that was evidently
defined under the wrong name in some configurations:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:64:12: error: 'amdgpu_debugfs_test_ib_ring_init' used but never defined [-Werror]
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:3803:12: error: 'amdgpu_debugfs_test_ib_init' defined but not used [-Werror=unused-function]
This fixes the function name.
Fixes: 4f0955fcc0 ("drm/amdgpu: export test ib debugfs interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
caused by not program dynamic_cu_mask_addr in the KIQ MQD.
v2: create struct vi_mqd_allocation in FB which will contain
1. PM4 MQD structure.
2. Write Pointer Poll Memory.
3. Read Pointer Report Memory
4. Dynamic CU Mask.
5. Dynamic RB Mask.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just three minor fixups for stuff in -next.
* tag 'drm-intel-next-fixes-2017-06-27' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Clear execbuf's vma backpointer upon release
drm/i915: Pass the right flags to i915_vma_move_to_active()
drm/i915/cnl: Fix RMW on ddi vswing sequence.
- a fix from Eric for synchronization with etnaviv exported dma-bufs
- thermal throttle support for newer GPU cores
- updated module clock gating to work around GPU errata
- a fix to restore userspace buffer cache performance
* 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux:
drm/etnaviv: restore ETNA_PREP_NOSYNC behaviour
drm/etnaviv: implement cooling support for new GPU cores
drm/etnaviv: update MLCG disables with info from newer Vivante driver
drm/etnaviv: update common.xml.h
drm/etnaviv: Expose our reservation object when exporting a dmabuf.
commit 2889caa923 ("drm/i915: Eliminate lots of iterations over the
execobjects array") jiggled around the error handling and replace a test
that we cleaned up properly after ourselves with an assertion. That
assertion failed because in the release function (moments after the
assertion) we were indeed forgetting to mark the vma as cleared. The
consequence was when testing an invalid relocation address, we would try
to release the vma twice (following the couple of attempts to verify the
address) and on the second release notice that the first release was
incomplete.
Testcase: igt/gem_reloc_overflow/invalid-address
Fixes: 2889caa923 ("drm/i915: Eliminate lots of iterations over the execobjects array")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170622104722.2583-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 51d05e1b29)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull x86 fix from Thomas Gleixner:
"A single fix to unbreak the vdso32 build for 64bit kernels caused by
excess #includes in the mshyperv header"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mshyperv: Remove excess #includes from mshyperv.h
Pull timer fixes from Thomas Gleixner:
"A few fixes for timekeeping and timers:
- Plug a subtle race due to a missing READ_ONCE() in the timekeeping
code where reloading of a pointer results in an inconsistent
callback argument being supplied to the clocksource->read function.
- Correct the CLOCK_MONOTONIC_RAW sub-nanosecond accounting in the
time keeping core code, to prevent a possible discontuity.
- Apply a similar fix to the arm64 vdso clock_gettime()
implementation
- Add missing includes to clocksource drivers, which relied on
indirect includes which fails in certain configs.
- Use the proper iomem pointer for read/iounmap in a probe function"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arm64/vdso: Fix nsec handling for CLOCK_MONOTONIC_RAW
time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accounting
time: Fix clock->read(clock) race around clocksource changes
clocksource: Explicitly include linux/clocksource.h when needed
clocksource/drivers/arm_arch_timer: Fix read and iounmap of incorrect variable
Pull perf fixes from Thomas Gleixner:
"Three fixlets for perf:
- Return the proper error code if aux buffers for a event are not
supported.
- Calculate the probe offset for inlined functions correctly
- Update the Skylake DTLB load/store miss event so it can count 1G
TLB entries as well"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf probe: Fix probe definition for inlined functions
perf/x86/intel: Add 1G DTLB load/store miss support for SKL
perf/aux: Correct return code of rb_alloc_aux() if !has_aux(ev)
Pull irq fix from Thomas Gleixner:
"A single fix for the MIPS GIC to prevent ftrace recursion"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips-gic: Mark count and compare accessors notrace
Pull input fixes from Dmitry Torokhov:
- a quirk to i8042 to ignore timeout bit on Lifebook AH544
- a fixup to Synaptics RMI function 54 that was breaking some Dells
- a fix for memory leak in soc_button_array driver
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - only read the F54 query registers which are used
Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list
Input: soc_button_array - fix leaking the ACPI button descriptor buffer
Pull SCSI target fixes from Nicholas Bellinger:
"Here are the target-pending fixes for v4.12-rc7 that have been queued
up for the last 2 weeks. This includes:
- Fix a TMR related kref underflow detected by the recent refcount_t
conversion in upstream.
- Fix a iscsi-target corner case during explicit connection logout
timeout failure.
- Address last fallout in iscsi-target immediate data handling from
v4.4 target-core now allowing control CDB payload underflow"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
iscsi-target: Reject immediate data underflow larger than SCSI transfer length
iscsi-target: Fix delayed logout processing greater than SECONDS_FOR_LOGOUT_COMP
target: Fix kref->refcount underflow in transport_cmd_finish_abort
Pull Kbuild fixes from Masahiro Yamada:
"Nothing scary, just some random fixes:
- fix warnings of host programs
- fix "make tags" when COMPILED_SOURCE=1 is specified along with O=
- clarify help message of C=1 option
- fix dependency for ncurses compatibility check
- fix "make headers_install" for fakechroot environment"
* tag 'kbuild-fixes-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix sparse warnings in nconfig
kbuild: fix header installation under fakechroot environment
kconfig: Check for libncurses before menuconfig
Kbuild: tiny correction on `make help`
tags: honor COMPILED_SOURCE with apart output directory
genksyms: add printf format attribute to error_with_pos()
Pull timer fix from Eric Biederman:
"This fixes an issue of confusing injected signals with the signals
from posix timers that has existed since posix timers have been in the
kernel.
This patch is slightly simpler than my earlier version of this patch
as I discovered in testing that I had misspelled "#ifdef
CONFIG_POSIX_TIMERS". So I deleted that unnecessary test and made
setting of resched_timer uncondtional.
I have tested this and verified that without this patch there is a
nasty hang that is easy to trigger, and with this patch everything
works properly"
Thomas Gleixner dixit:
"It fixes the problem at hand and covers the ptrace case as well, which
I missed.
Reviewed-and-tested-by: Thomas Gleixner <tglx@linutronix.de>"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Only reschedule timers on signals timers have sent
A recent commit included linux/slab.h in linux/irq.h. This breaks the build
of vdso32 on a 64-bit kernel.
The reason is that linux/irq.h gets included into the vdso code via
linux/interrupt.h which is included from asm/mshyperv.h. That makes the
32-bit vdso compile fail, because slab.h includes the pgtable headers for
64-bit on a 64-bit build.
Neither linux/clocksource.h nor linux/interrupt.h are needed in the
mshyperv.h header file itself - it has a dependency on <linux/atomic.h>.
Remove the includes and unbreak the build.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: devel@linuxdriverproject.org
Fixes: dee863b571 ("hv: export current Hyper-V clocksource")
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1706231038460.2647@nanos
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 4.12. Most of these actually came in last
week but got held up for some more testing.
- three fixes for kprobes/ftrace/livepatch interactions.
- properly handle data breakpoints when using the Radix MMU.
- fix for perf sampling of registers during call_usermodehelper().
- properly initialise the thread_info on our emergency stacks
- add an explicit flush when doing TLB invalidations for a process
using NPU2.
Thanks to: Alistair Popple, Naveen N. Rao, Nicholas Piggin, Ravi
Bangoria, Masami Hiramatsu"
* tag 'powerpc-4.12-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64: Initialise thread_info for emergency stacks
powerpc/powernv/npu-dma: Add explicit flush when sending an ATSD
powerpc/perf: Fix oops when kthread execs user process
powerpc/64s: Handle data breakpoints in Radix mode
powerpc/kprobes: Skip livepatch_handler() for jprobes
powerpc/ftrace: Pass the correct stack pointer for DYNAMIC_FTRACE_WITH_REGS
powerpc/kprobes: Pause function_graph tracing during jprobes handling
Pull ACPI fix from Rafael Wysocki:
"This fixes the ACPI-based enumeration of some I2C and SPI devices
broken in 4.11.
Specifics:
- I2C and SPI devices are expected to be enumerated by the I2C and
SPI subsystems, respectively, but due to a change made during the
4.11 cycle, in some cases the ACPI core marks them as already
enumerated which causes the I2C and SPI subsystems to overlook
them, so fix that (Jarkko Nikula)"
* tag 'acpi-4.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / scan: Fix enumeration for special SPI and I2C devices
Pull i2c fix from Wolfram Sang.
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx: Use correct function to write to register
Pull GPIO fix from Linus Walleij:
"A single GPIO patch fixing the compatible string for the MVEBU PWM
controller embedded in the GPIO controller before we release v4.12.
Hopefully"
* tag 'gpio-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: mvebu: change compatible string for PWM support
