Since we use the audio component to transfer the ELD to the audio
driver on hsw+ platforms there is no point in even programming
the hardware ELD buffer. Stop doing so.
The one slight caveat here is that this is not strictly legal
according to the HDA spec. PD=1;ELD=0 is only documented as
an intermediate state during modeset. But if there is no hardware
that depends on that then I guess we're fine. Or we could
perhaps set ELD=1 without actually programming the buffer?
Note that the bspec sequence of PD=0;ELD=0 -> PD=1;ELD=0 ->
PD=1;ELD=1 is also not strictly correct according to the HDA
spec, as the only documented transition from PD=0;ELD=0 is
straight to PD=1;ELD=1.
Additionally on hsw/bdw the hardware buffer is tied in with the
dedicated display HDA controller's power state, so currently
we mostly fail at proramming the buffer anyway. When the HDA
side is not sufficiently powered up the ELD address bits get
stuck and the ELD data register accesses go nowhere.
Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
References: https://lore.kernel.org/intel-gfx/20221012104936.30911-1-ville.syrjala@linux.intel.com/
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-3-ville.syrjala@linux.intel.com
Since we use the audio component to transfer the ELD to the audio
driver on ilk+ platforms there is no point in even programming
the hardware ELD buffer. Stop doing so.
The one slight caveat here is that this is not strictly legal
according to the HDA spec. PD=1;ELD=0 is only documented as
an intermediate state during modeset. But if there is no hardware
that depends on that then I guess we're fine. Or we could
perhaps set ELD=1 without actually programming the buffer?
Note that the bspec sequence of PD=0;ELD=0 -> PD=1;ELD=0 ->
PD=1;ELD=1 is also not strictly correct according to the HDA
spec, as the only documented transition from PD=0;ELD=0 is
straight to PD=1;ELD=1. But that is not even possible on
these platforms as the bits live in different registers.
Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-2-ville.syrjala@linux.intel.com
New DMC releases in linux-firmware will stop using version number in
blob filenames. This new convention provides the following benefits:
1. It simplifies code maintenance, as new DMC releases for a platform
using the new convention will always use the same filename for the
blob.
2. It allows DMC to be loaded even if the target system does not have
the most recent firmware installed.
Prepare the driver by:
- Using the new convention for DMC_PATH() and renaming the currently
used one to make it clear it is for the legacy scheme.
- Implementing a fallback mechanism for future transitions from
versioned to unversioned paths so that we do not cause a regression
for systems not having the most up-to-date linux-firmware files.
v2:
- Keep using request_firmware() instead of firmware_request_nowarn().
(Jani)
v3:
- Keep current DMC paths instead of directly using unversioned ones,
so that we do not disturb initrd generation.
(Lucas, Rodrigo)
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230123182021.31239-2-gustavo.sousa@intel.com
This version brings along following fixes:
- Fix timing not changning when freesync video is enabled
- avoid disable otg when dig was disabled
- Properly reuse completion structure
- Pass DSC slice height to PSR FW
- merge dc_link_dp into dc_link
- move dp cts functions from dc_link_dp to link_dp_cts
- move dp irq handler functions from dc_link_dp to link_dp_irq_handler
- Enable AdaptiveSync in DC interface
- adjust MALL size available for DCN32 and DCN321
- Set init freq for DCFCLK DS
- Use |= when assigning wm_optimized_required
- move eDP panel control logic to link_edp_panel_control
- create accessories, hwss and protocols sub folders in link
- Disable SubVP for PSR panels
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Switching between certain modes that are freesync video modes and those
are not freesync video modes result in timing not changing as seen by
the monitor due to incorrect timing being driven.
The issue is fixed by ensuring that when a non freesync video mode is
set, we reset the freesync status on the crtc.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This is a workaround for an dcn3.1 hang that happens if otg dispclk
is ramped while otg is on and stream enc is off.
But this w/a should not trigger when we have a dig active.
[How]
Avoid disable otg when dig was disabled.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Jingwen Zhu <Jingwen.Zhu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Connecting displays to TBT3 docks often produces invalid
replies for DPIA AUX requests. It turns out the completion
structure was not re-initialized before reusing it, resulting
in immature wake up to completion.
[How]
Properly call reinit_completion() on reused completion structure.
Cc: stable@vger.kernel.org
Reviewed-by: Solomon Chiu <solomon.chiu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When DSC is enabled, the PSRSU seletive update region
must be multiple number of DSC slice height number.
The original solution is to overwrite the SU Y granularity
by DSC slice height in DAL driver. However, the size
of the SU Y granularity variable only has 8 bytes
and the DSC slice height may over the 8 bytes size.
[How]
Instead of overwriting the SU Y granularity value,
add a new DSC slice height pararmeter and pass it
to DMUB PSRSU FW. The PSRSU FW will refer to the
DSC slice height value and extend the SU region.
Reviewed-by: Dennis Chan <dennis.chan@amd.com>
Reviewed-by: ChunTao Tso <chuntao.tso@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Robin Chen <robin.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Temporarly merge dc_link_dp functions into dc_link for the
purpose of removing dc_link_dp files. This is a transitional
change for later commits where we will further refactor dc_link
file.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MALL size available can vary for different SKUs.
Use num_chans read from VBIOS to determine the available MALL size we can use
[How]
Define max_chans for DCN32 and DCN321.
If num_chans is max_chans, then return max_chans as we can access the
entire MALL space.
Otherwise, define avail_chans as the number of available channels we are
allowed instead.
Return corresponding number of channels back and use this to calculate
available MALL size.
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Set init frequency for DCFCLK DS
- For now choose 10Mhz after turning off all pipes on init
- DCN32 spreadsheet shows 8Mhz is min for any display config
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
link component contains three sub folders:
accessories - utilities for improving testability, logging or tracing, doesn't impact
end user use cases.
protocols - specs defined protocols used in end user use cases
hwss - hwss owned link_hwss object, served as an abstraction layer in hwss to
access various types of encoder/phy/dpia endpoints in a unified interface.
sooner we will have files directly under link folder one for the implementation of
each major link behavior such as link_create, link_detect, link_validate
and link_set_dpms.
Reviewed-by: George Shen <George.Shen@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- We cannot enable subvp on PSR panels because when
PSR is active, HUBP is turned off and we cannot rely
on the HUBP vline interrupt
- When in PSR, surface data also cannot be prefetched to MALL
because the main HUBP will be off
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- [FW Promotion] Release 0.0.150.0
- Correcting prefetch mode for fast validate
- Set hvm_enabled flag for S/G mode
- set allow_freesync parameter in DM
- Revert "ignore msa parameter only if freesync is enabled"
- Allow idle optimization after turning off all pipes
- Guard Freesync HDMI parsing with dc_lock
- Speed up DML fast_validate path
- Disable MALL SS and messages for PSR supported configs
- force connector state when bpc changes during compliance
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
AV1 is only supported on the first instance.
Added vcn_v4_0_enc_find_ib_param() to help search for an IB param.
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY and HOW]
When fast validating, we should be agnostic to any sort of optimizations
such as supporting Pstate or stutter in Vblank. We should change our
prefetch mode for fast validate to support none of these optimizations.
For example, Valve Index running at 144Hz can only be validated without
any support these optimizations.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
After enabling S/G on dcn314 a screen corruption may be observed.
HostVM flag should be set in S/G mode to be included in DML calculations.
[How]
In S/G mode gpu_vm_support flag is set.
Use its value to init is_hvm_enabled.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
